Error 0xc18a0001 on my C7250 printer. I've unplugged and replaced printer cartriges.

Hi judyk,
It sounds like you have taken all of the recommended troubleshooting steps to try and resolve the error. Since you are still experiencing the error, the printer will require servicing. Please call or email us at one of the methods on the Contact Us page to obtain your servicing options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

Ihave an ipad and an epson nx430 printer. I tried to print my airline itinerary and it printer 4 pages that was mostly ads. How can i print just the itinerary which fits on oneage?

I have an ipad2 and an epson nx430 printer. I tried to print my airline itinerary and it printer 4 pages ,most ofwhich were ads. How can i focus just on the information that i need?

Does the website you're using offer a "printer freindly" button or perhaps the faciltiy to email the intenerary to yourself?
Matt

Screen with the error "S.M.A.R.T. Status BAD, Backup and Replace" Press F1 to Resum - Q180

Hello!
always at start up i have a screen with the error "S.M.A.R.T. Status BAD, Backup and Replace" Press F1 to Resum - Q180
did anyone know how to solve
i have changed the batterie to but no sucess
thx
Peter
Solved!
Go to Solution.

smart is telling you that your hdd is failing it may still work but for how long who knows
http://en.wikipedia.org/wiki/S.M.A.R.T.
Thx dave
yoga 2, lenovo b540
3 custom gaming pc systems

I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

You cannot use USB. It has to be a network capable printer.. is it?? You did not indicate how it is connected.. but by wireless or ethernet then scanning is possible otherwise not.

Why can't I print from my ipad 2 on my epson workforce 840 printer??? it show that there isn't a printer on my Ipad and my printer is wireless .

why can't I print from my ipad 2 on my epson workforce 840 printer ??? it show that there isn't a printer on my Ipad and my printer is wireless.

The 840 isn't supported by Airprint. See the list here:
http://support.apple.com/kb/ht4356
You may be able to use a universal printing app (check the app store), or Epson may make an app. Or you could get a more up-to-date printer.

Network printing: ipp "printer is busy"/LPD and AppSock prints garbled data

Dear all,
After months of trying on and off, I give up - I need help please. Since upgrading to Leopard, then Snow Leopard, I cannot print to the office computers. Windows or IPP printer settings produce the "printer is busy - wait 15 seconds" etc error message; LPD and AppSock printer settings enable data to get through, but the output is garbled text (the Adobe Postscript 3 engine on the printer isn't happy, obviously).
We have some new colour copier/printers from FujiXerox (FX Docucentre IV C3370) and some older Canon laser printers (LBP5600), but they don't offer Bonjour connectivity and I am stuck. I can ping them, I have the latest drivers, but nothing works. They worked fine in OS10.4 on this same computer, and XP and Windows 7 of course in BootCamp, but nothing in OS10.5 or 10.6.
I've been all over the web and through the Discussions forums and tried all the suggestions I can see, to no avail. I've tried KeyChains to carry by login ID and password to the machines, and deleting/adding printers through both the System Preferences and the CUPS interface, but I confess I am stuck. I currently copy all of my documents every day to a Dell desktop on my desk just to print them out.
The Canons are run through a Windows server, the FujiXerox has a standalone IP address and no separate print queue at the moment. Running OS10.6.2 on MacBook Pro. I'm happily connected to the network and can access all sharepoints and servers, I just can print to any of the printers - it's infuriating.
Is it a Firewall problem? Sub-net problems? Any ideas most welcome, thanks for looking and sorry if I've missed out anything important.

MacJapan wrote:
After digging around I found the Windows drivers are ART EX drivers; obviously that doesn't really come in Macintosh flavour, but FujiXerox do have a non-postscript driver for the machine which I downloaded. This time I could connect via LPD, as FujiXerox recommend, but the print job stalls at the spooling stage; the error message reads that the 'Library/Printers/FujiXerox/Filter/FXPSACMMFilter.bundle/Contents/MacOS/FXPSACM MFilter' failed.
The filter bundle crashing could be related to permissions on the filter or a result of using a 32bit driver with a 64bit application.
For the permissions, you could opening Terminal and entering the following text;
sudo chown -R root:wheel /Library/Printers/FujiXerox/Filter/
then press ENTER. You will be prompted to enter you user name and password. The user name needs to be an account that has admin rights to the Mac.
Exit Terminal and restart the Mac. Now try printing again.
Regarding the 64bit apps, these are the included SL apps like Preview, TextEdit and Safari. If you attempted to print with one of these apps when you got the error, you could try forcing the app to open in 32bit mode. This is done with the application closed. Locate the app with Finder and do a Get Info on the package (icon). There will be the option to 'Open in 32bit mode'. Select this, close the Get Info window and open the app. Now try a print.
Regarding the Non-Postscript driver, looking at the FJ drivers web site, there are two of these drivers available. Both are showing as version 1.1, but the dates are different. Have a look at the following link to see if you have the one with the most recent date.
http://onlinesupport.fujixerox.com/setupDriverForm.do?ctrycode=AU&lang_code=en&dlang=en&pid=DCIVC3370
Greg's suggestion to use the Generic PCL is also a good alternative. One thing I did find however with the PCL5c is that it does not print in colour, even though it would suggest it does based on the name (the c normally indicates colour).
Did you get the Canon LBP printing?
Pahu

Multiple duplicate prints via apple airport and bonjour printer driver on HP Color Laserjet 1600

Please advise if this request will incur any costs as I have exhausted all self-help resources and articles in your knowledge base. Nothing applies to my issue. I used to be able to use this printer via USB or wireless network using apple airport base station and bonjour printer driver. When my company ugraded to Windows 7, USB seems to work ok and wireless under same setup works too, but each page prints out many duplicates >40 duplicates when in wireless state. I am also trying to print from my IPAD and this does not seem to work at all. If you tell me this printer will not perform, please just be honest and let me know. I don't mind buying another printer if needed but don't want to incur more high level cartridge costs (bought many due to duplicate issue) and could afford the new printer instead. Deciding between brother or hp depending on usable feedback here. Using Lenovo T410 for all that matters...Thank you, Marc

Unfortunately, without knowing the model of the printer I wont be able to let you know too much information on the issue or how to resolve it. Also, when you upgrade your OS you often have to update the programs you are using, I would recommend uninstalling the printer and using the software available on http://goo.gl/7R6HT.
Let me know Marc!

Wireless Printing w/ Airport Express and HP Printer

I'm running Snow Leopard. Connected my HP 4280 Printer via USB to Airport Express. Presto! Instant wireless printing. Then 3 days later, without changing any settings, I now get "Printer is Offline" message.
I've tried dumping printer driver, and reinstalling new driver downloaded from HP. No luck.
I went to Airport Set Up Utility > Printer > Manual Set Up, and there is no printer listed.
Thanks in advance for any ideas to help me!

I got in touch with HP through their website. They sent me an email with step-by-step instructions. Here they are. Problem solved!
From HP:
Cause for the issue:
This issue may occur due to device or network conflicts.
Resolution:
Before we proceed with troubleshooting this issue, please confirm if the latest printer software (Mac os x 10.6 compatible) is installed on your Mac and the Mac is able to communicate wireless with the router.
If yes then continue with the following steps,
Step 1: Reset the Print System
1. Click on Apple icon
2. Select System Preferences
3. Click on Print and Fax
4. Click on the printer on the left side
5. Press the Ctrl key + click on Your printer icon
6. You will get an option to choose Reset Print system.
7. Click on Reset Print System. This will reset the print system.
Step 2: Repair Disk Permissions
1. On your Mac, click on Go menu from the finder menu bar at the top
2. Select Utilities tab
3. Click on Disk utility
4. Once the disk utility pops up, select the hard drive and click on Verify Permissions tab.
5. This may take some time to complete as the Mac will try to verify all the permissions for the hard drive.
6. Once the Verify Disk Permission is complete, restart the mac.
7. Follow steps 1 – 4.
8. In the 4th step select Repair Disk Permissions. Once the repair disk permissions is complete,
9. Restart the Mac.
Step 3: Re-add the Printer
1. Click on Apple icon
2. Select System Preferences
3. Click on Print and Fax
4. Click on the + sign to add the Printer
5. Select your printer next to which says Bonjour.
6. Click on Add.
Try Printing.

I have a new 110D printer and I want to print a small thing and it prints new document and page 1 on

it will not print just pics I other stuff printed what do I do
i

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system and what program are we printing from?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HELP: Trying to print with a dot and matrix printer

Ok, here's the deal:
I own a very very old, 1985, OLIVETTI DM 292 printer and I want to try printing with it on Mac OS X 10.5.7 .
I am trying to use the generic EPSON 9- or 24-pin drivers that are present in OS X.
But so far I've had very little success.
I am using a parallel-to-USB cable that makes OS X recognize the printer as the name of the cable manufacturer.
Let's do an example:
I want to print a .doc, Microsoft Word document.
I PRINT and select the DaM printer.
The status window eventually comes to "GenericClass: waiting for device" and the printer freezes.
Previously, if I turned the printer off and then on immediately after it would print (even with the most possible chaos).. but this trick seems to be uneffective now.
Can you help me ?
Thanks to anyone who'll answer.

Try the alternate USB driver, usbtb. It is supposed to help with USB-parallel adapter cables.
http://buymelunch.org/printing/usbtb/

Slow print C6180 after restart and one print job

If I unplub power and restart printer the first print job is fast, but subsequent print jobs are slow. Have to unplug power before each print job to get fast printing.... whats the deal?

Cryincoyote, where are you plugging your printer in? Is it directly to a wall, into a surge protector or in a battery backup? Depending on how the printer receives power also determines how much power the printer receives. If it does not get the full amount, then you can have performance issues.
Let me know, and I will get back to you ASAP!

Reader 9 Print dialog shows garbage and cannot print

Hi there,
I have a problem when opening the print dialog box from a VB application. The dialog box is being scrambled.
Following symptoms:
- all select boxes are empty
- the preview area is empty
- several brochure options are shown in front of the page settings.
And - the most important problem: I cannot print.
When I click on [Print] the Reader hangs up.
The same application works fine with Reader 7 and 8.
Any help would be appreciated.
Thanks
Hyper

I installed Adobe Reader 9 and am unable to print. All I get are blank pages. It is not my printer as I can print everything else with the exception of pdfs. It seems to jam my printer - strange. Any suggestions? I can view the files but not print.

Print & Fax prefs & any and all print commands unresponsive

Hi all,
Newb here. I have a 17" mbp running Leopard 10.5.2. I'm networked to a Konica Printer at work and I sent a very large job across. The job was incorrect so I canceled it. That's when the trouble started. Now I can't even open the print dialog in ANY program, nor can I open "print & fax" preferences in sys prefs.
I've opened the activity monitor and cupsd is just devouring my cpu. I've tried to kill it and restart it in terminal, but honestly, I'm don't really know what I'm doing, nor what the core problem is. Any help is appreciated...is there any more info that you need from me to help troubleshoot?
Thank you!

Hi John,
Thanks for your suggestions. Just so you know, I'm not a "console & terminal" guy. I'm willing to try any of your suggestions, but you're going to have to walk me thru...
Opened console and there seems to be a constant stream of "cupsd" errors. Every 10sec actually.
Here's the system log entry:
"Dec 28 09:10:46 MacPro com.apple.launchd[1] (org.cups.cupsd[86732]): Job appears to have crashed: Segmentation fault
Dec 28 09:10:46 MacPro com.apple.launchd[1] (org.cups.cupsd): Throttling respawn: Will start in 10 seconds
Dec 28 09:10:46 MacPro com.apple.ReportCrash.Root[86731]: 2010-12-28 09:10:46.278 ReportCrash[86731:2f03] Saved crash report for cupsd[86732] version ??? (???) to /Library/Logs/DiagnosticReports/cupsd2010-12-28-091046localhost.crash"
If you'd like to see the entire Diagnostic report, let me know.
What would you suggest now?

Smart form printing issue with LOCL and SAP printer

Hi,
The issues are as follows:
1. the top portion of the Invoice and PO does not print when using the SAP printer (works when using LOCL)
2. the shaded areas of the Order Confirmation and Invoice are black when printing to a SAP printer (works when using LOCL)
In an attempt to correct the printing issue is was suggested that we change the SAP printer device type from HPLJ4 to POST2. This did address the problem where the shaded areas were black but then we received reports that other reports printed "garbage". Its possible that using POST2 device type causes issues when printing to HP compatible printers.
Apparently all the testing was done using the SAP printer LOCL and not the SAP printer name and SAP spool system. LOCL uses the SAP GUI and Windows system to produce the output. Our production users at the plant site and Toledo are using SAP defined printers with the device type of HPLJ4. HPLJ4 is our standard here as OC for our printer definitions and we have HP compatible printers installed in our Toledo location and all of our remote sites. We need to be able to correctly print the Invoices, Purchase Orders, Sales Order Confirmations on our SAP printers.
What can be done to the reports to allow them to print on our HPLJ4?
Thanks, Prathap

Hi Prathap,
Check the background shading of the windows of the Smartform where you get the black boxes. If it is set something like this:
   Color: White
   Saturation: 100%
this can be the problem.
I know it is strange but some black and white printers cannot handle this setting. They only know one color black so the ignore the color setting and just take the saturation 100% setting.
The reason it works with local and device type SAPWIN is that the print data is created in Windows and sent to the printer as graphic.
Please change the shading for window MAIN -> tab 'Output Options' to:
   Color: Black
   Saturation: 0%
and this should resolve the problem.
Then create a new spool and check if the problem is resolved. See SAP Note #400050.
Regards,
Aidan

Air print using my Iphone and B110 printer.

How do I connect my B110 with my iphone using a third party application so I can print ?Air print.
thanks
Bernard

Have you enabled web....this printer needs an update to use airprint...if you have not...from the front panel select select apps then enable web services and follow the on screen instructions.
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

Error 0xc18a0001 on my C7250 printer. I've unplugged and replaced printer cartriges.

Similar Messages

Maybe you are looking for