Error 0xc1900101-0x30018 when upgrading from Windows 8 to 8.1

I've tried numerous times to update my Envoy x2 but get an error message the "Windows Setup could not configure Windows to run on this computer's hardware" the next panel says "Couldn't update to Windows 8.1 0xc1900101-0x30018"
Why am I getting this error, is there a fix, if not, when will a fix be available.

Hi @MsgE-8
Welcome to the HP Forums!
It is a terrific place to find answers and suggestions!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
Here is a link to HP PCs - Updating Windows 8 to 8.1
Here is a link to the Windows Compatibility Center where you can have it scan your computer to ensure you can update to Windows 8.1.
The errors you received are usually due to a driver issue.
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Similar Messages

Error ORA-03113 when upgrading from 11.2.0.1 to 11.2.0.3

I keep on getting this error when upgrading from 11.2.0.1 to 11.2.0.3
[Thread-57] [ 2012-04-20 13:18:28.207 CEST ] [SummarizableStep.genSummary:409] Generating Summary for:=Pre Upgrade ,status is:=Successful
[Thread-57] [ 2012-04-20 13:18:28.208 CEST ] [SummarizableStep.genSummary:409] Generating Summary for:=Oracle Server ,status is:=Failed
oracle.sysman.assistants.util.step.StepExecutionException: ORA-03113: end-of-file on communication channel
Upgrade failed due to running the step "Upgrading Oracle Server"
        at oracle.sysman.assistants.dbma.backend.component.SubComponent.executeSubStepImpl(SubComponent.java:738)
        at oracle.sysman.assistants.dbma.backend.component.SubComponent.executeStepImpl(SubComponent.java:585)
        at oracle.sysman.assistants.dbma.backend.component.Component.executeStepImpl(Component.java:317)
        at oracle.sysman.assistants.dbma.backend.SummarizableStep.executeImpl(SummarizableStep.java:183)
        at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
        at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
        at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2708)
        at java.lang.Thread.run(Thread.java:637)
[Thread-57] [ 2012-04-20 13:18:28.209 CEST ] [SummarizableStep.executeImpl:212] Throwing exception e from SummarizableStep
[Thread-57] [ 2012-04-20 13:18:28.209 CEST ] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@4805e9f1
oracle.sysman.assistants.util.step.StepExecutionException: ORA-03113: end-of-file on communication channel
Upgrade failed due to running the step "Upgrading Oracle Server"
        at oracle.sysman.assistants.dbma.backend.component.SubComponent.executeSubStepImpl(SubComponent.java:738)
        at oracle.sysman.assistants.dbma.backend.component.SubComponent.executeStepImpl(SubComponent.java:585)
        at oracle.sysman.assistants.dbma.backend.component.Component.executeStepImpl(Component.java:317)
        at oracle.sysman.assistants.dbma.backend.SummarizableStep.executeImpl(SummarizableStep.java:183)
        at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
        at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
        at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2708)
        at java.lang.Thread.run(Thread.java:637)
[Thread-57] [ 2012-04-20 13:18:31.000 CEST ] [CompManager.isModeSet:9822]   DB Upgrade Mode Setting := 1
[Thread-57] [ 2012-04-20 13:18:31.001 CEST ] [CompManager.isModeSet:9823]   Mode := 1 is set
[Thread-57] [ 2012-04-20 13:18:31.001 CEST ] [SQLEngine.done:2189] Done called
[Thread-57] [ 2012-04-20 13:18:31.001 CEST ] [Database.getStepSQLInterface:787] OH in database: /app/oracle/product/11.2.0.3/db_1Any clues about what could be wrong? I am planning to upgrade with the manual steps if it does not work :(

Pl post OS details - are you using DBUA to upgrade ? Are there any errors in the database alert log ?
ORA-00600 [kodpunp-nulltds], ORA-00600 [kokeeiix1], [600] When Upgrading To 11GR2 [ID 1367827.1]
HTH
Srini

HT1420 since upgrading to a domain the computers had to be re authorised for itunes, is there a way to deauthorise compters without waiting till the next deauthorise all? this also happens when upgrading from windows 8 to 8.1.

since upgrading to a domain network itunes has asked to be re authorised, this also happens when upgarding from windows 8 to 8.1. my next de-authorise all is In January, but i cant wait that long what can i do

If a computer's taking up multiple authorizations, try deauthorizing it even if it says it's not authorized. If that doesn't work, go back to the article you asked this question from and use the link to contact Apple under the 'To deauthorize all computers associated with your Apple ID' section of it.
(95172)

Error al actualizar de windows 8 a windows 8.1 / Error when upgrading from windows 8 to windows 8.1

Tengo un G580 con windows 8 instalado y actualizado completamente, cuando intento actualizar a windows 8.1 mediante la Tienda, sale un mensage que dice:
La tienda Windows no esta disponible en este equipo.
Ponte en contacto con el administrador del sistema para obtener informacion.
Soy el unico usuario con privilegios de administrador, en Windows Update no aparece la actualizacion a Windows 8.1
¿Alguna Solucion?.
Gracias.
I have a G580 with windows 8 installed and updated completely, when I try to upgrade to 8.1 through the shop windows, I get a message that says:
The Windows Store is not available on this computer.
Contact your system administrator for information.
I am the only user with administrator privileges in Windows Update does not appear the upgrade to Windows 8.1
Any Solution?.
thanks

Hi @MsgE-8
Welcome to the HP Forums!
It is a terrific place to find answers and suggestions!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
Here is a link to HP PCs - Updating Windows 8 to 8.1
Here is a link to the Windows Compatibility Center where you can have it scan your computer to ensure you can update to Windows 8.1.
The errors you received are usually due to a driver issue.
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Our computers were upgraded from Windows XP to Windows 7. When we try to access CS5 we get an error. We originally had CS3 and upgraded to CS5 now the error message wants us to choose a qualifying product which seems to be CS4 however we went from CS3 to

Our computers were upgraded from Windows XP to Windows 7. When we try to access CS5 we get an error. We originally had CS3 and upgraded to CS5 now the error message wants us to choose a qualifying product which seems to be CS4 however we went from CS3 to CS5. Can anyone assist

Contact serial number support by web chat.
Mylenium

I have just upgraded from Windows XP to Windows 7 then reinstalled the CS4 I had previously paid for (including the unique code number). Now I get an error message that says "Licencing has stopped working".

I have just upgraded from Windows XP to Windows 7 and then reinstalled CS4 (purchased a couple of years back and paid for) then input the unique code number. Now I get an error msg that says "Licencing has stopped working". What do I need to do?

Hello Carole,
Please try the steps mentioned in the link below:
Error "Licensing has stopped working" | Windows
Thanks
Alisha

Cannot upgrade from Windows 8 to Windows 8.1 - error message 0x80070003

Hello
I am not an expert.
I have followed all of the instructions that I have found, but remain unable to complete the (free) upgrade from Windows 8 to Windows 8.1.
The message I get is an error code: 0x80070003
I am using a Lenovo U510.
Would appreciate any help, I have been trying for months and can see no solution but to reset. However, would prefer to avoid that.
Greetings,
kabaa

Hello
I am not an expert.
I have followed all of the instructions that I have found, but remain unable to complete the (free) upgrade from Windows 8 to Windows 8.1.
The message I get is an error code: 0x80070003
I am using a Lenovo U510.
Would appreciate any help, I have been trying for months and can see no solution but to reset. However, would prefer to avoid that.
Greetings,
kabaa

Upgrade from windows 7 to windows 10 one error fix

hi,
recently renewed in Windows 10 and the OS would hang before login screen. wheel spin and nothing happens.
so turn it off and start you pc with fingerprint sensor it helps me.
now i'm using w10. p.s. sorry for my english grama.

Moving this discussion to the Creative Cloud Download & Install forum.
FranzX you should be able to upgrade from Windows 7 to Windows 8.1 without affecting your current installation.

Upgrad from Windows 8 Pro on Windows 8.1 Pro with Media Center!

Hello,
I did upgrade from Windows 8 Pro on Windows 8.1 Pro with Media Center. Now the problem is when I press on any file with the right mouse button is normally open curtain menu, but when I press on any folder, right-click, the system crashes after a few seconds
and back up.
Best regards!

Hi,
Go Start>Control Panel>Administrative Tools>Event Viewer and scroll through the logs for System and Applications to see if anything shows up in red as Error or Warning.
Meanwhile, going to HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers
in regedit.exe, backing up the whole ConxtentMenuHandlers folder, and then start deleting all of them one by one and continuously testing the right click. Of course import the Context folder after you find it, test once again by right clicking
to make sure you found the problem, and delete the file that caused the problem.
Karen Hu
TechNet Community Support

Any Proactive measures for 10GR2 when upgrading from W2K3 to W2K3 EE

Current environment
SQL> select banner from v$version;
BANNER
Oracle Database 10g Release 10.2.0.2.0 - Production
PL/SQL Release 10.2.0.2.0 - Production
CORE 10.2.0.2.0 Production
TNS for 32-bit Windows: Version 10.2.0.2.0 - Production
NLSRTL Version 10.2.0.2.0 - Production
We are planning an OS upgrade from windows 2003 stand edition to Windows 2003 enterprise edition.
1) From the ORACLE prospective will there be any bottlenecks.
2) Are they any proactive measures i need to take.If so can you provide me link to a doc which might be helpful
Any comments are appreciated.

Both Windows 2003 Standard Edition and Enterprise Edition are certified platforms for Oracle 10g Rel. 2.
I can see you are currently working with patchset 10.2.0.2.0. You didn't mention if you are planning to upgrade to 10.2.0.3.0 but if you are willing to do so, there are several issues reported by the oracle community, I have included verbatim transcripts from the referred sites, just to name a few:
http://www.pythian.com/blogs/356/oracle-10203-patchset-known-issues-and-bugs
Other platforms to watch out with 10.2.0.3 patchset are Windows and Linux 32 bit - Metalink Note 403616.1 “Many Child Cursors create in 10.2.0.3 on Windows and Linux”. This will likely affect applications with heavy usage of bind variables (perhaps, ones with cursor_sharing=force/similar as well) and busy OLTP is a good candidate. See for yourself the note I mentioned above - it describes some symptoms and consequences (latch contention, ORA-4031, ORA-600) pretty well. The good news is that Linux platform has one-off patch available already - patch 5705795.
http://www.pythian.com/blogs/335/oracle-10203-patchset-is-out
Oracle 10.2.0.3 patchset is out
December 5th, 2006 - by Marc Fielding
My colleague Vamsi Chikkam noticed that the Oracle 10.2.0.3 patchset has been released for Linux and Windows 32-bit. The major bugfixes are the same as my original post with a few additions:
* Identical SQL run in different schemas may modify the wrong schema’s tables (bug 5458753)… we have run into this problem at a client site and it’s not pretty. Workarounds include qualifying schema names in SQL and one-off patches for 10.2.0.2. MetaLink note 329673.1 has more details.
* When cursors are being reloaded frequently in the shared pool, PLS-306/ORA-1722/ORA-1858 errors can occur (bug 4752541)
* Under Windows platforms, triggers referencing :NEW/:OLD using NCHAR/NVARCHAR character sets can error out (bug 5388136)
* The same issue as bug 5388136 above also causes compilation errors on 10.2.0.2 databases upgraded from previous releases under Windows(bug 5383828)
http://www.orafaq.com/maillist/oracle-l/2007/03/05/0329.htm
To inform you about important information regarding your software, Oracle is notifying you of an issue discovered in a recent download of a database patch set or bundle. This issue affects the following patch sets and bundles (hereinafter "Patch Set"):
* 10.2.0.3 all ports
* Windows 32 and 64 bit patch bundles: + 9.2.0.7 Bundle 13, 14, 15 + 9.2.0.8 Bundle 2, 3 and 4 + 10.1.0.5 Bundle 9, 10, 11 + 10.2.0.2 Bundle 9, 10, 11, 12, 13 + 10.2.0.3 Bundle 1
Oracle believes that the number of customers with user data that may be affected by this Patch Set is small; however, the information contained in this announcement is intended to help you determine if your data may be affected and what to do if it is. Please read through this message in its entirety to determine if you have the issue and be sure to perform all recommended steps before contacting support. This information should be maintained for your reference as necessary.
Due to 2007 U.S. and Canadian changes to Daylight Saving Time, you may have stored timestamp data in your Oracle database which was not previously within Daylight Saving Time, but is now included (e.g., timestamp data with dates falling between March 11, 2007 and April 1, 2007). Such data must be corrected BEFORE installing a Patch Set into your Oracle Database. The instructions to detect and correct affected data prior to installing Patch Set are documented in MetaLink (for more information, see MetaLink [1]Note ID # 359145.1).
~ Madrid
http://hrivera99.blogspot.com/

AMD redeon HD 7400 graphic not working after upgrading from windows 7 to windows 8 Pro

Hello,
I have hp Pavilion G6 1117tx model. i have upgrade from windows 7 to windows 8 Pro. after upgrading i have observed that on righ click option i have not fine CCC and Configure switachable graphic option is missing. so please help me how i can solve proble relationg to AMD redeon hd 7400 grphic card and intel hd 3000 series grphic switchable option.
Please help........
Mounal Patel
This question was solved.
View Solution.

Hi,
Download and install the switchable graphics driver on the following link.
http://ftp.hp.com/pub/softpaq/sp59001-59500/sp59147.exe
When the installation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Upgrading from windows vista to windows 7

I am upgrading from windows vista to windows 7. The upgrade I am using is going to delete all of the information I currently have on my hard drive.
I have itunes set up with all of the correct artist/album/track/cover image information for my files. I also have consolidated all of these tracks to an external hard drive - no mp3s in itunes are stored on my local hard drive. I consolidated these tracks after I edited all of the artist/album/track/cover image information.
My questions is this. Once I reinstall itunes on windows 7, when I import these tracks from the external hard drive - are the edits to the files (artist/album/track/cover image information) going to be shown in itunes like they were prior to the windows upgrade? I have a large number of tracks that I have invested a huge amount of time into and I really don't have the time or patience to duplicate the effort.
Does anyone have any thoughts on this?
Thanks in advance for the help.

Duplicate post. Please see your other post for suggestions.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Officejet 8620, fail to print, windows 8.1 (upgraded from windows 8)

I have spent many hours trying to resolve an issue on a Dell Vostro laptop, that was upgraded from Windows 8 pro to Windows 8.1 pro and has the latest updates installed. When printing, the print is delivered to the print spooler, it is there momentarily, then disappears. Nothing is delivered to the printer, and no activity is observed at all on the printer. This is on 2 different 8620 printers. I am able to install and print to a laserjet M1217mfp from the laptop with no problems. A different machine that was loaded directly with windows 8.1 prints perfectly to the 8620 printers.
I have tried the following with no success:
1) Install from original HP 8620 installation CD
2) HP Print and scan doctor - remove the print driver and download latest software . ( 3 times)
3) Manually deleting all printers, Stop spooler service, delete print driver from Print Server Properties, uninstall all HP software, reboot and install from latest print driver OJ8620-198 downloaded from this link: http://ftp.hp.com/pub/softlib/software12/COL51217/bi-124140-4/OJ8620_198.exe
4) Same procedure as step 3, including stop spooler, rename C:\Windows\System32\spool\drivers\x64\3 to C:\Windows\System32\spool\drivers\x64\3.old. Reboot and install from latest driver as above.
5) Run level 4 on HP Officejet Software and Driver Removal Utility from the link below and reinstall : http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=za&lc=en&softwareitem=mp-110134-1
6) Same procedure as step 4, as well as removing printer registry keys in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows x64\Print Processors except "winprint" key. Delete all HP folders in C:\Program Files\HP. Reboot and reinstall latest driver.
7) Follow the manual procedure described in Microsoft KB2987964 "Cannot print by using a Hewlett Packard XPS-based print driver after you install KB2769165" http://support.microsoft.com/kb/2987964 Version of hpbxpsrender.dll is 0.3.7600.16385 consistently through all of the steps listed.
9) Create a new local administrator account on the laptop. Follow the procedure in Step 6.
The issue seems to be that the spooler discards the print immediately and it also seems to be related to the upgrade from windows 8 to Windows 8.1 but only for Officejet Printers. The only option I have not tried yet is to format and reload the machine with Windows 8.1 Pro, but this is a drastic step to resolve a problem that should be resolved by HP based on the many reports posted on the Internet by users experiencing this issue on OfficeJet printers.
What can be done to resolve this?

Hi @Electronza ,
Thank you for providing all the detailed steps you have already tried to resolve this issue. I would like to help you out today.
I have provided a document with some steps for the Print Jobs Disappear from the Print Queue and Do Not Print (Windows 8). Go to Step 4: Rename the HPBXPSRENDER.DLL file, since you have already tried the other steps.
Please take a look at this document from my co-worker, if the issue persists. The driver installed might be the Class Driver and not the HP Full Feature drivers. Missing or partial print issues on Windows 8 / 8.1.
Please provide in detail the results if you are still having issues.
Have a great weekend!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Upgrade from Windows Home Server 2011

Even though Windows Server 2012 Essentials is being mentioned as a replacement for Windows Home Server 2011, there doesn't seem to be any documentation or mention of can you upgrade from Windows Home Server 2011 to Windows Server 2012 Essentials?
Will this work with the beta download and will we then be able to upgrade this version to the RC and/or release version?
As you may guess I have a Windows Home Server 2011 and am interested in looking at Windows Server 2012 Essentials to see what it offers me. The storage spaces sounds exactly what I want to replace the drive extender on the previous home server version. The
problem is that I don't mind sacrificing my present server box by installing the beta but it would be nice if it actually retained what settings it could via an upgrade option, which I could then have a chance of using with a proper release version.

Just clarifying about the 'upgrade path' and 32b vs 64b.
Yes, no in-place upgrade. However, one could theorise about some form of 'migration' being possible, where the list of users, the content of your shares, the current backups, would be 'moved' from old box to new.
I was in fact pretty sure no such process existed. (Wouldn't it be neat though? AND in future _at least theoretically_ possible, using processes similar to SBS AD migration.)
From this perspective putting the new box onto the network is similar to replacing WHSv1 with WHS11, in that nothing is carried over. No gain, but no lesser. Working on currently available information.
The later comment about the work laptop is, TTBOMK, a resounding 'NO'. When attempting to join a member of another AD the 'connect' process stated 'You must 1st remove the PC from the other AD'. I haven't tested this extensively but believe that PC's _capable_
of operating in an AD (Pro, vs Home, versions) will be made members of the WS12E AD. It is only PC's that do not have 'domain join' capability that are left in workgroup mode.
TTBOMK, AFAICS, so far, etc...

Error in "tempInit" when upgrading Flash MX AS2 FLA to Flash CS6 AS3 FLA

I experienced a compiler error in "tempInit" when upgrading an AS2 project to AS3. "tempInit" is something internal to Flash Authoring, because it doesn't exist in my project and other people have gotten the same error.
I've read about this problem, and everyone thought it was because of an instance with a bad name, such as one that includes spaces or equals a keyword or something like that, and people have shot down the idea that the problem is with the library symbol, but I'm convinced now that it's a corrupted library symbol. Here's why:
I had 8 instances of a particular movie clip on stage, each on a different frame.
When I deleted the symbol from the library, the compiler error went away (but so did my stage instances). So that simply tells me that the problem is with that particular clip (I originally had to delete each clip in my library one at a time and recompile to determine the offending clip), but that obviously didn't rule out the name problem since the stage instances get removed when I deleted the corresponding library symbol. Still, I knew it couldn't be a name problem, because all instances had a valid name "mainidea".
I ruled out the name problem by creating a new library symbol identical to the first (it's just a few text fields with a rectangle drawn around them). Without changing the names of the existing instances on stage, I used the "swap" button to swap in the new library symbol. The use count on the old one dropped to zero, and the use count on the new one went up to 8. The compiler error was gone, and it only went away once the use count for the old symbol was zero.
The old and new library symbols are identical as far as I can see. Same child objects at the same positions, same textfield content, same child instance names, no ActionScript code, etc. Since there was no discernible difference, I came to the conclusion that the original library symbols had somehow been corrupted under the hood, somewhere in the pipeline between opening an old Flash MX file and setting the flash player version to 11.4 and selecting AS3 as the script language. Somewhere in that process, the Flash Authoring environment screwed something up. Does anyone know anything about this problem?
I have hundreds of files I need to upgrade, and that symbol was copied to each of them as they were created years ago, and I think I'm going to experience this problem with all of them. It's time-consuming to duplicate the old symbol and replace all the instances for every single file, so I'm trying to find the source of the problem and a workaround to avoid it.

It works, but slowly as if somer AS1 code is interpreted into
very
ineffective machine code by AS2 interpretor
My question was if it is know which particular AS1 features
have these
problems in AS2
"ggshow" <[email protected]>
ÓÏÏÂÝÉÌ/ÓÏÏÂÝÉÌÁ
× ÎÏ×ÏÓÔÑÈ
ÓÌÅÄÕÀÝÅÅ:
news:f17r79$efu$[email protected]..
> some AS1 not working when the movie run in AS2...
> if you want to publish it as AS2, then write it in AS2.
>
> * it is time to learn AS3
>

Error 0xc1900101​-0x30018 when upgrading from Windows 8 to 8.1

Similar Messages

Maybe you are looking for

Error 0xc1900101-0x30018 when upgrading from Windows 8 to 8.1