Error 0xE800000A on iTunes 10.1 Win7 Ultimate 64bit and iPhone 3GS 4.1

Since I updated to 10.1 I'm having the above error when connecting my iPhone for syncing. iPod Classic 160Gb and the new iPod Nano 16Gb work fine.
Tried to uninstall and reinstall iTunes 3 times now but had no luck.
Each time I connect the iPhone the first time after reinstalling, Win7 correctly load and install the drivers (and I can find the usbaapl64.sys file in the system32/driver directory) but immediately iTunes tells that "couldn't connect to the iPhone because of an unknonwn error (0xE800000A)"
Anyone has this issue?
Thanks for any help
Antonio

megatony99 wrote:
unknonwn error (0xE800000A)"
see [_*iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting*_|http://support.apple.com/kb/TS3221].
JGG

Similar Messages

Windows 7 RC 64bit and iPhone 3gs/ iPhone not recognized by iTunes

I've had my 3gs for a about a week. After the third day it stopped syncing with my computer. ITunes (latest 64 bit version) gives the error that an iphone was detected, but not properly recognized. Is anyone else using this combination of 3gs and windows 7?

I built a new I7 920 system in May, and am using the Windows 7 RC 64bit as my OS. Even though my Iphone and my wifes 3G worked fine at first. Shortly after that about two weeks. They stopped being recognized by Itunes. I scoured the internet looking for a fix. The only one that corrected the problem was to extract the individual program executables from the Itunes64 bit setup file, by using Winrar, and then changing the Apple mobile device program to run in compatability mode. Launch it and select repair, after I did this my phones were recognized again by Itunes, but unfortunately this only lasted for a few days. Now i'm back to neither of them being recognized by Itunes again. I don't know what else to do. It would be nice if Apple could give us a leg up on this and help get these things working better.

Getting "the procedure entry point CGImageRelease could not be located in the dynamic link library CoreGraphics.dll" error when starting Itunes. Haved reloaded many times and still the error.

Getting "the procedure entry point CGImageRelease could not be located in the dynamic link library CoreGraphics.dll" error when starting Itunes. Haved reloaded many times and still the error.

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
Does iTunes launch properly now?
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes

HT201210 I can't submit the new itunes software to update my computer and iphone. I keep getting error 1667. Please help

I can't submit the new itunes software to update my computer and iphone. I keep getting error 1667. Please help

Upgrading to Mavericks
You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
Upgrading to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

I have an iMac, an iPhone, and a MacBook Pro. My full iTunes library is on the iMac and iPhone, but only a handful of songs are on my MacBook. They are all associated with the same Apple ID. How do I get all of my music on the laptop?

I have an iMac, an iPhone, and a MacBook Pro. My full iTunes library is on the iMac and iPhone, but only a handful of songs are on my MacBook. They are all associated with the same Apple ID. When I try to sync, I get a warning message stating that I will lose songs on my phone which aren't on the laptop. How transfer my music from my phone to the laptop?

Hey kbert73
I would do a transfer of purchases from the phone and not sync. If you sync then it will want to start over and sync music that is on the MacBook Pro. If you want to transfer the music, check out the article below that will give you multiple options on how to move. I have also provided on how to sync with multiple computers.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
Thanks for using Apple Support Communities.
Regards,
-Norm G.

HT204074 I have our music collection on iTunes Match for my PC, ipad and iphone. Can I share that music collection with my wife so she can play that with her iphone? Even though she has a different Apple ID from me?

I have our music collection on iTunes Match for my PC, ipad and iphone.
Can I share that music collection with my wife so she can play that with her iphone? Even though she has a different Apple ID from me?

Her iPhone will need to be set up to iTunes Match using your Apple ID to be able to share music via iTunes Match. Otherwise you'll have to download the music to your computer and then copy those tracks into her iTunes library, assuming hers is separate.
Regards.

Am unsuccessful getting my iMac iTunes library synced to my iPad and iPhone. all devices are authorized and have latest software. the device icon is not shown in my toolbar as the tutorial indicates. what next?

can not get my iMac iTunes library synced to my iPad and iPhone using USB. all devices have latest software. There is no device icon on my IMAC toolbar as indicated it should be in the support FAQs. What advise does anyone have?

Hello Luckyone1,
Thanks for using Apple Support Communities.
If your iOS devices are note being recognized in iTunes on your Mac, please follow the steps in the article linked to below.
iOS: Device not recognized in iTunes for OS X - Apple Support
Take care,
Alex H.

How do i get music on that i have put on itunes off a cd on to my iphone 3gs with ios 5.1?

how do i get music on that i have put on itunes off a cd on to my iphone 3gs with ios 5.1?

Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
Commercial software utilities for transferring songs from i-device to Mac:
Senuti - http://www.fadingred.com/senuti/
Phoneview - http://www.ecamm.com/mac/phoneview/
MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/ - Mac & Windows

There is no sim card installed in the iphone error after update software from 4.1 to 5.01(iphone 3gs)

there is no sim card installed in the iphone error after update software from 4.1 to 5.01(iphone 3gs)

Thanks for reply, but problem is diffrent I got updated my device via I tune(IPSW 5.01) before that, it was working well after upgreade 4.1 to 5.01 I am getting problem. No cydia no signal!
BTW Thank you,

Why do I get "Cannot connect to ITunes Store" message on my IPad and IPhone?

Why do I get "Cannot connect to ITunes Store" message on my IPad and IPhone?
I have tried numerous times to connect to ITunes Store to update my current apps and continue to get this message. Apple has determined that it is not a device problem or an Apple problem. It has to do with ITunes. Can anyone help?

I am having no problems downloading from the app store today. I just tried it again. However, I read some of those other discussions as well and there have been times when the iTunes or App Store has been out of commission. Don't hold your breath waiting for Apple to acknowledge it because that is not going to happen. That is not how they operate.
You can report it to them here ....
http://www.apple.com/support/itunes/contact/

After updating iTunes and iPhone 3gs AppleMobileDeviceService.exe initializes and takes up 50% of CPU

After updating iTunes and iPhone 3gs AppleMobileDeviceService.exe has been taking over 50% of my CPU. When i attempt to sync my iPhone iTunes hanges on backing up. I have uninstalled all the apple software and reintalled it. This fixed the problem until QuickTime updated. Immediately following the update Apple...Services.exe went haywire agian. Any help?

Thanks wjosten. I've now been through all this, and there was a lot of old 3d party phone stuff to remove.
However, I have not progressed really. Any other thoughts on this please?

ITunes on Win7 and iPhone 3GS Apps frozen - grayed out - Why?

I use my iPhone 3GS via iTunes on my Win7 desktop, and when I load the iTunes 64 bit software (ver10.4.1.10) it can see the iPhone, and GRAYS OUT installed apps, which I can not move or re-arrange. I had trouble downloading purchased Apps until I went to my iPhone Update button and installed them from the Purchased bar. When I 'Synch' the iPhone to iTunes, it only goes through a very quick 'Step 1 of 4' and then stops. All this after I have uninstalled iTunes and then reinstalled iTunes, so what's on the PC is the most current version. That version also says my iPhone software is 100% current, and the iPhone firmware reports it is running 05.16.02.   For some reason, iTunes reports multiple copies of the (very few) music MP3s I put on the phone ... I hardly ever use the iPhone for music - it's a tool - not a toy.
Bottom line: my iTunes software is mostly frozen - I can't move or arrange apps - and I have lots of downloaded data (thank God for GoodReader!) and carefully managed work related Apps on my iPhone. I'd had to have to 'reformat' or 'restore' the iPhone which I think would strip the iPhone bare. Can anyone help?    Thanks, in advance ~

By the way - on a similar posting (frozen icons etc) someone suggested that the iPhone Restrictions might be the problem - they have to be turned OFF - isn't a fix here. My iPhone Restrictions have not been turned 'on'. See:   https://discussions.apple.com/message/11085451#11085451 - that didn't 'FIX' my problem.

Win7 Ultimate 64bit: PS CS4 64bit does not start

Hello,
on a fresh Windows 7 Ultimate 64bit I recently installed the whole CS4 Production Premium.
PS CS4 starts properly but PS CS4 64bit only starts the License Agreement, when I hit 'I agree', the window disappears and nothing happens.
Can anyone help, please?
Thanks!

Go into msconfig, startup, and look for a check mark in Adobe CS4 service manager. I don't have the package you have I just have CS4 extended and it is there. This has to be checked in order for Flexnet copy protection to run.
Go to services and look for 2 FLEXnet Licensing Service. One will say 64 for 64 bit and the other won't (32 Bit). ensure both are set to Manual. If the 64 bit is not manual right click on the startup type, Choose properties, then change to manual using the drop down window. If it is manual do just what I said but this time just start the service and close out. Now try to start the 64 bit CS4.

ITunes freezes when syncing iPad 2 and iPhone 4. Error -20

I have the latest version of iTunes installed on windows xp. When attempting to sync my iPad 2 and iPhone 4, iTunes immediately freezes until I unplug the device. I have tried restoring my iPad, but I'm still experiencing the same issue.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

ITunes 10.3.1.55 not recognising iPhone 3gs/iPad 2

Hi I hope someone can help!
I updated to latest iTunes when I purchased iPad 2 and for three days all was fine. I'm running a 64 bit laptop on Windows 7. Yesterday the pc ran a windows update and installed some security changes, not sure if this will have been the issue.
When I went to synch either the iPad or the iPhone today, the pc recognises the device bringing up the usual what do you want to do with this, but in iTunes nothing happens for a fair few minutes and then I get the following error message with an exclamation mark:
"iTunes cannot read the contents of the <device name>. Go to the Summary tab in the <device> preferences and click Resore to restore this <device> to factory settings."
I reinstalled iTunes and it seemed like the problem was solved and I managed to get iPad 2 synched however iTunes froze while in the back up stage of synching the iPhone 3 gs and I had to close it down from the windows task master.
Now my iPone 3gs won't work due to the failed synch and when I try to do the system restore it gets so far and then brings up the critical message error:
"The iPhone could not be restored. An unknown error occured (6)." I was able to restore the iPhone to factory settings on another machine, but then unable to restore from back up when back on the laptop.
I've checked that I have the latest Apple Mobile Drivers and have uninstalled and reinstalled just to be sure.
I'm running the AVG Free Anti Virus and Zone Alarm Firewall. I've checked the Zone Alarm Programs and ensured that iTunes is ticked for access to everything.
I'm stumped and my phone doesn't work.
Please help!
Thanks
Wealie

Don't reset your phone. Resetting will return the phone to factory settings and you will loose everything. Spend some time working toward a fix.
You might want to try a different USB cable. It is possible that your cable conincedentally went bad. I have had this problem before - even cables that will chrage the phone sometimes stop working for data purposes.

Error 0xE800000A on iTunes 10.1 Win7 Ultimate 64bit and iPhone 3GS 4.1

Similar Messages

Maybe you are looking for