Error (1) trying to restore 5.1.1. in a New IPAD
Hi! Two days ago I received a message to upgrade IOS 5.1 to 5.1.1 in my new ipad. I did and after 2 minutes my ipad get stuck with the image to connect to itunes. I did it and I tried to restore system with sucess It failed many times. I connect my ipad in DFU and again the same problem. I can't go to a genius bar because in Argentina -where i live- doesn't exist. Have anyone the same problem? Could you fix it? Thanks in advance!
I did it and I tried to restore system without sucess, It failed many times
Similar Messages
-
I am got error while trying to restore,, but i just only error file with 3194. I try many step by install lastest version and fix host file, but still fail. Anybody can give me any key point to solve this problem? Thank you
Error 3194:
This device isn't eligible for the requested build
It means that Apple has stopped signing the version of iOS that you have, try downloading the latest iOS version, then try Restore again. -
1015 ? I'm trying to update my iPhone 3 and get this error message. The phone belonged to my wife, and I'm trying to restore it to factory settings as new owner. Any ideas?
Before beginning the download, try temporarily disabling your antivirus, anti-adware, anti-spyware, and any other anti-whatever that is required with the secure OS your computer is running.
-
My ipad 2 will not work. I tried to reset it many times. Nothing. I plugged it into my computer and followed directions so itunes would show up. Tried to restore (bummer to lose everything!) The ipad could not be restored due to an unknown error (code 9). Any help?
Found this thread by searching the forum. I hope it helps.
https://discussions.apple.com/thread/5471311 -
MY IPAD IS DISABLED I TRIED TO RESTORE IT BUT ITS SHOWING MESSAGE "The iPad could not be restored. the device isn't eligible for the request build"
Follow the steps here:
Error 3194, Error 17, or "This device isn't eligible for the requested build" - Apple Support -
the iPad is totally new to me. I can't seem to do anything with my Apple ID. As the title says, I am trying to download the Facebook app to my new iPad and I keep getting an error. It tells me to sign in using my existing Apple ID, which I enter, then when I put in the password I get ConnectionManager::invoke::Failed to find service connection url. Cancel or Retry. I have no idea what I'm doing wrong. Any help would be greatly appreciated.
I'd also love to know how to get rid of the old owner's name, which was Mike - I'm AnnWow, I found a solution in another thread:
I had exact same error.....
Rebooting - Failed
Logging in to iTunes - Failed
Logging into itunes Store - Failed
Logging into iTunes Genius - SUCCESS I woulnd't have thought it would make a difference but it does Then just log into the 'other' services with iTunes.
Good luck!
I still need to know how to change the name to Ann, though, Mike keeps popping up - and yes, I have changed it under Settings..... -
I keep getting an error when trying to download a tv series right on my iPad from the iTunes store. I am able to download on my laptop then synchronize but it's a hassle specially if my laptop is not with me. All other Apps seem to be working fine. Help!
If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem. -
I tried to restore backup from itune to my new iphone 5s but have forgotten the password what should I do?
JennyGEL wrote:
I ... have forgotten the password what should I do?
Which password?
If you mean the passcode to your iPhone, here's the solution:
http://support.apple.com/kb/HT1212
If you mean the encryption password to your backup on your computer:
Warning: Make sure it's a password you will remember or write it down for safekeeping. If you encrypt an iPhone backup in iTunes and forget your password, you can't restore from backup and your data will be unrecoverable.
If you can't remember the password and want to start again, you must perform a full software restore and chooseset up as a new device when iTunes prompts you to select the backup from which to restore. -
I am trying to download Tap Tap Revenge on my new Ipad air..however..i searched for it in the App Store but there are none...help please..i really love this game! Is there something wrong with my App Store or my ipad??
It looks like the app is not currently in the App Store, I can't find it in the UK nor US stores.
If you had previously downloaded it then do you have a copy on your computer's iTunes so that you can sync it to your iPad ? -
Setup a new iPad because I couldn't restore my old iCloud as my new iPad didn't have the latest software. How do I get my old pictures back?
jessicavw wrote:
Once I find the back up file how do I get in onto my phone without the restrictions code going back on too?
You don't... If you restore the backup, it will restore the restrictions passcode.
Do you have your contacts, calendar, etc, synced to your computer? I'm not asking if you backed up, I'm asking if you synced... In other words, if you open Outlook, or Windows Address Book (I'm assuming you use a PC) are your contacts there?
If you have not been syncing your contacts, etc, you may have to restore so that you can set up the sync, get the contact data off the phone, then set it up as a new phone again, do not restore the backup, and set up the sync with your address book. -
Get error 69 trying to restore from a backup CD
I have only seen this error associated with an ipod in every search I have made. Can not contact Apple Itunes Support without a serial number... the problem is not with my ipod!!!!! It is when I try to restore from the CD's I burned!! If I "explore" the cd I can see the "music" but then if I try to open them I just get this d*mn error. I did a clean install of WinXP after getting a wicked virus. I have been able to import some of my music (only two cd's from 10)
So what now?? not all the music that was on the cd's were on my ipod..... *grumble grumble grumble* so what was the point of backing up???
Any Help would be appreciate and thank you for letting me vent
BethTried to post this last night but site was down. The disks appeared clean with no scratches. I did scan one of them with an ubuntu cd/dvd utility and there were a small amount of bad sectors. Is there a way to import "the good" music, some work around? a file carver? In the past I have tried to restore itunes playlists to no avail. I really don't want to lose this music all over again.
-
My iPod is stuck on apple logo and I get a 1434 Error when trying to restore it.
Hello, I hope somebody can help me. I have a 120 gb ipod classic (6th generation). I purchased it a long time ago. It was working fine for a few years and then suddenly it's been stuck on the apple logo ever since.
I tried to restore it by putting in on disk mode and connecting it to my Mac. My iTunes recognizes the device (But my Mac doesn't!). On iTunes, I tried to restore it, but I get an error message 1434, stating that the restoration could not be completed.
I read that I should try to erase the drive with Disk Utility, but when I get there, the button to erase the drive is unclickable. I tried to partition as well, but it also did not work (maybe I am doing it wrong? Could somebody direct me with better instructions?)
I'm wondering if the hard drive is dying, or if I have a bad ribbon, or if the logic board itself is broken. Not sure what method of action I should take. I can't even get into the diagnostic screen.
PLEASE HELP!Hello E1777,
You can try this link to download iTunes from the Apple website. It should resolve the issue for you.
iTunes 11.0.4
http://support.apple.com/kb/dl1614
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
Unknown Error when trying to restore backup on iPad
I'm trying to restore a backup onto my iPad 2, and every time I try to restore it, it does what it should where it starts to load and has the estimated time, etc. But when it finishes it says that there was an unknown error. When I tried to restore it, it did the same thing but instead gave me the error 1604, which I still can't get fixed either, but I tried restoring it on a different computer and it worked fine. So I thought there was something wrong with the computer that I originally tried it with that was causing the problem, so I transferred the backup onto the other computer and tried it and it game me the exact same error. I've spent days trying to fix this, and nothing has worked. I already looked at and tried doing what the support sites say with troubleshooting, restoring, recovery/DFU mode, etc. but nothing has worked. My iPad is on iOS 6.1 and I just upgraded iTunes to the latest version before I started all of this, and it is jailbroken with Evasi0n, although I've tried it with and without the jailbreak installed and it still has the same outcome. Is it a memory problem? Has anyone had the same problem and fixed it, or has any suggestions? And if not, is there a way that I can easily extract all of the files from the backup and put them on my iPad without using iTunes? Thanks.
From here: http://support.apple.com/kb/TS3694
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection. -
I keep getting the -1 error when trying to restore?
So I'm trying to restore my iPhone 3GS but I keep getting the -1 error in iTunes.
I have tried putting the iPhone in dfu mode but had no luck.
Can anyone help?https://discussions.apple.com/message/23298645#23298645
more
https://www.google.dk/search?q=iphone+restore+error+1&oq=iphone+restore+error+1& aqs=chrome..69i57j0l5.6429j0j7&sourceid=chrome&espv=210&es_sm=93&ie=UTF-8 -
Get 0x80780124 error when trying to restore Windows Server 2008 R2
We are trying to restore a HP Proliant ML350 G6 Windows 8 R2 Server but every time we do we get a message that states "The system image restore failed error details: Windows Backup failed to extend or mount the file system on the recovered volume.
(0x80780124)" We were trying the restore from the CD. Any ideas what would be causing the issues?Hi,
Please try to run chkdsk on the backup vhd to see if you can restore the server. In additional, you can also refer to the thread below to troubleshoot the issue:
SBS 2011 Bare Metal Restore Failed
http://social.technet.microsoft.com/Forums/en-US/bd90747a-3e5d-47b3-8a67-748864aa20f4/sbs-2011-bare-metal-restore-failed?forum=smallbusinessserver
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Maybe you are looking for
-
Photos and Albums have Disappeared
I appreciate that there seems to have been some problems with iPhoto 09 and Snow Leopard. I have been successfully using iPhoto 09 since I installed Snow Leopard without any problems. I purchased Snow Leopard immediately after it was launched. I back
-
MultiMapping: Varialbe file name
Hi, I am using multimapping with 3 target message types. For each message type a file needs to be created. Is it possible to use variable substitution for generating different file names for each message type? For example, I am using MT1,MT2 and MT3
-
The repository no longer exists. All packages can be found in the community repo of AUR: [community] Server = ftp://ftp.archlinux.org/community/os/i686/ My repository Add the following to your /etc/pacman.conf... [swiergot] Server = ftp://ftp.interse
-
Re-Scheduling the background job.
Hello All, How do you schedule the daily job for closing the reconciliation key FPG4 and transferring them to R3 FPG1. Regards Charvi
-
In a catalog full of DNGs how can I display only files with metadata that has not been written to the files themselves. The goal is to avoid unecessary file updating in terms of backups. I don't want to update files that don't need it, so I guess the