Error 1 when scheduling upload

Hello all,
i am getting an error when i am trying to preview my load for the info package that i created
The file that i am uploading is like this
mat001 coke
mat002 pepsi
etc etc
my info object is created as a character string
I selected the master data tab
The error i am getting is
Error 1 when loading external data
Message no. RSAR234
Diagnosis
Error number 1 occurred when loading external data:
1. Error when reading the file (access rights, file name, ...)
2. File size or number of records does not correspond to the data in the control file
3. Error when generating the IDoc
4. File contains invalid data (errors with an arithmetic operation or data conversion)
Procedure
Check whether you have the required access rights and whether the data in the control file is correct (file names, record length, number of records, ...). Correct the data in the control file if necessary and check the data file for invalid data (values of the wrong type, values in the wrong format for conversion exit,...). Check whether the file has headers that have not been specified.
Please advice

Hi,
Try to change all the characters to uppercase.
BW will not allow lowercase characters unless you select lowercase in your infoobject general tab.
Regards,
Baba

Similar Messages

R/3 to BW (error message when scheduling load)

Hi
I am new to BW and R/3. I have been getting this messsage when scheduling the load (transaction data) from R/3 to BW ODS.
Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during
IDoc update:
System response
There are IDocs with incorrect status.
Procedure
Check the IDocs in Source System . You can get here
using the BW Monitor.
Removing errors:
How you remove the errors depends on the error
message you receive.
Please advise what,how to solve this issue.
thanks

Hi Carlos,
welcome to SDN.
Run RSA1 - Source system - right click on the source system concerned - check connection.
If the source system is inactive, you need to activate or even restore.
For more details, please check:
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a618ae07211d2acb80000e829fbfe/content.htm
Lilly

Error Message when Scheduling a report in Infoview

I have created a report in Crystal Report using the Universe. Report is saved to the Enterprise and set up to schedule in Infoview.
When the report is scheduled for now or any other "when" time, I receive the error message:
"Error in File C:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\Data\procSched\tfcu-fics.reportjobserver\~tmp58860bbee30730.rpt: Unable to connect: incorrect log on parameters."
Currently running CR Version - 11.5.0313
BOE Version - 11.5
On my workstation - the ODBC connection, System DSN, for crystal is using the Adaptive Server Anywhere 9.00 driver - have no issues creating the report from the Universe.
On the server the ODBC connection, System DSN, for crystal is using the SQL Anywhere 10 driver. Would using the SQL Anywhere 10 driver create the error message above?
To test this I changed the workstation System DSN connection for crystal to SQL Anywhere 10 and when trying to refresh a report created from the Universe I kept receiving the ODBC Login window asking for the database password.
Is there an issue with SQL Anywhere 10 and a Universe not holding the database username or password?

Try This..
1. Open the crystal client on your local machine and import that particular report.
2. Do Database -> Verify Database. Then refresh the report on your PC and make sure that it returns data as expected.
3. Export it back to repository and try scheduling it again. You can verify through CMC for Crystal Reports under " Database Configuration" property to make sure it points to the right ODBC.
Let us know.

Error message when scheduling a report

Hello,
We have Fabric Manager 4.2(7b)
When we generate a schedule from a created report we get the following error:
What went wrong here?
Rgds,
Ivy

re-install with version 5 solved the problem

How can videos be uploaded from iOS iPhoto to Flickr when they cannot be selected. (The Flickr iPhone app always gives a vague error message when video upload is attempted.)

I am trying to upload short MP4 videos from my iPad 2 running iOS 5.1.1 to Flickr. These videos were taken on a Panasonic FZ150, and I am able to upload videos from this camera from my iMac when I am at home. (I am currently thousands of miles from home, which is why I want to upload from my iPad.)
I can upload photos from iOS iPhoto, but when I select videos, the selection count does not increase, and so they are not uploaded.
There is no Flickr app for iPad, but I tried the iPhone app, and was able to upload photos. However, when I try to upload videos, I always immediately get the error message:
"An error occurred. We could not upload your video. Please try again."
Frustratingly, there is no indication of what the error is.
Finally, I tried the Flickr website uploader page, but all the "Choose File" buttons were dimmed, so apparently there is no attempt to integrate ithis page with iPad,.
I have had the same experience several times over the last few weeks in different locations, including private homes and hotels, none of them corporate offices with strong firewalls, and I am not running any firewall software other than standard iOS.
I welcome any suggestions, workarounds, etc., that will enable me to upload videos from IPad to Flickr.

KRDHarris-
I am not familiar with Flickr, but found their support page at <Flickr Support>. You may get better help there than here. I get the impression that the App is somewhat buggy.
The iTunes preview page indicates the App is for iPad as well as the iPhone. <Flickr App Preview>
Fred

Iweb error 404 when I upload it to my ftp server

I've spent all night trying to get this to work. I've read other threads with similar problems and their solutions aren't solving my problem.
I have my iweb site. I publish it to its own folder. I upload it to the ftp directory (index.html + folder) directly to the root folder using cyberduck. And yet it still comes up "error 404 - not found. So I tried uploading it to my .mac account, and it still says error 404.
And there are no spaces or weird characters in any of my files' names or the site's pages' names.
Anyone have any thoughts on what might be wrong with this site I've made and why it won't read?

whats your link? Have you noticed how there is a folder for you website (ex. site), and a folder that is your ACTUAL website (ex. Home) ? When I had that problem, I made the mistake of uploading the "site" file with the index.html, rather than the "Home" file and its appropriate index. For some reason, that was what worked... so I figured I'd offer the suggestion. Because trust me, I had the same issue for over a week and it was driving me mad.

Error ( termination error : 8) when scheduling Process chain.

Hi Friends,
We are just configuring the BW system 3.5 ( Installing etc etc), I created a Process chain and trying to schedule it, I get the following Error.
" Job terminated with error code : 8" , when I check the details of the message I see this " Cannot schedule the job with Id : BW REMOTE". Is it something that the basis/ securtity has to set up for the BW guys , to schedule jobs.
Thanks,

Hi Smily,
The possible reason for that error is the User type of the background user. Please check out OSS note 511475 which talks about this problem and possible solution. I have used this earlier.
You can see this for info on how to make the change:
/message/685940#685940 [original link is broken]
Hope this helps...

I keep getting this error message when I upload songs?

This never happened to me before but recently. I sent in my ipod to get fixed since I have a 1 year warranty on it. I just got back from the 2 weeks I sent it in. I sent it in because it was giving me the same message before. Heres what it looks like.
http://img503.imageshack.us/img503/7523/itunes6rh.png
Is there anyway to fix this because my warranty is about to run up in May and I want to get it fixed personally but if I can't I'll have to send it in again.

I just got another message trying to upload again ahh! So stressful right now. Heres the message
http://img100.imageshack.us/img100/9706/delayed8ld.png

Error when scheduling a workbook

Has anyone come accross this error before when scheduling a workbook thru the Scheduling Manager in Discoverer Plus 10gR2?
"Exceeded maximum query size". All worksheets run to a sucessful completion when you run them one at a time.
Thanks Brent

Hi
this is bug, refer to doc id: 472947.1 in metalink
you need to download the Patch 6493304.
regards,
Jay

Error when scheduling the infopackage for loading Master data attributes

Hi,
Iam getting the following error message when scheduling this Master data Attributes ZIP_0PLANT_ATTR_FULL..( Flexible update of Master data info objects)..
In Data load monitor error i got this following error message.
Error message when processing in the Business Warehouse
Diagnosis
An error occurred in the SAP BW when processing the data. The error is documented in an error message.
System response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update rules
Thanks

HI,
A caller 01, 02 or equal to or greater than 20 contains an error meesage This is an Idoc error. Please check the Idocs :
1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
Also see if there is any 'sysfail' for any datapacket in SM37.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
5) Check in SM58 and BD87 for pending tRFCs and IDOCS.
Once you identify you can rectify the error.
If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the data tables.
SM21 - System log can also be helpful.
Thanks,....
Shambhu

Error message when uploading book for printing. All images are jpg and rgb. Could they be too large to upload? What size is required and how do I reduce size in Aperture?

I receive an error message when I upload my book for printing. Not sure what the problem is. All my images are jpg and rgb. Could they be too large as it takes about 15minutes to upload to Apple. How do I reduce the size of the image in Aperture?

Hi Leonie,
Thanks for your reply.
Error message below. The preview is fine . I can discount the first 2messages as its a new computer so plenty of disk space and upload doesn't seem to be interrupted. I have uploaded to iphoto before. have tried to upload 3times with the same error message. I had to photo my slides with a Kaiser Baas photo maker , which apparently doesn't scan but takes photos in megapixels of the slides. I am wondering now if the format is incompatible though they are jpg files or the colour type wrong. The image files are around 1-3 mb each and 72 ppi. I think I will now scan them properly with a scanner to 300dpi anyway to improve quality.
Apple talks about image files not being too big for uploading but gives no sizing of what too big is?
Error message
1. Upload Error. Loss of connection or file corruption during order upload may cause an incomplete order. Resubmitting your order usually resolves this issue.
2. Low Disk Space. If your computer is running on low disk space, your files may be assembled incorrectly. Create more space by deleting unused files.
3. Unreadable PDF file or image files. Files are sometimes assembled incorrectly due to CMYK or Grayscale color space. Use the RGB color space for best results.

Error 8 when starting the extraction program

HI all
I have the following problem when i start an extraction. "Error 8 when starting the extraction program" I test the Extraction program on the R/3 system(source system) and it works, It displays records. On the target system in the infpk under step-by-step it gives you the error and It does not give a oss number, it only suggest that you need to look for a OSS. We have BW 3.5 installed with ECC 5.0.
Also on the source system Tcode WE02, for the load period id displays the IDOC with a red light with the same error. It displays the partnet, basic type and the port, the Error is marked next to inbound(inbox).
Regards
alex

Alex,
Check the following OSS notes
947690
511475
23538
Even though the note 947690 is for process chain the steps mentioned in this note could cause Error 8 when scheduling a package for extraction. I think in your case the server name or the host name is incorrect. Check the host and the server name in TCODE SM51 and ask basis to look for the same in RFC entries using SM59 as well.
Abdul

Datasource problem - error 8 when starting extraction program

Hello,
we are using a datasource (data mart) to write data from one cube to another.
When running the infopackage we get the 2 errors below. When testing with the extractor checker, everything was fine. Datasource was replicated, transfer rules are active.
1. Message no. R3019 - Error 8 when starting extraction program
2. Message no. RSM340 - Errors in source system
more error info...
" Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API ."
Has anybody any ideas?
Thank you,
Ruairi

Hi Friend,
Check the following OSS notes
947690
511475
23538
Even though the note 947690 is for process chain the steps mentioned in this note could cause Error 8 when scheduling a package for extraction. I think in your case the server name or the host name is incorrect. Check the host and the server name in TCODE SM51 and ask basis to look for the same in RFC entries using SM59 as well.
Regards,
varun.

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

Logged the call with SAP who directed me to 'Define settings for attachments' in IMG and setting the 'Deactivate Java Applet' & 'Deactivate Attachment versioning' checkboxes - problem solved.

Error message "Error when scheduling the query(JOB_CLOSE)".

Hi all,
While using query extractor (rscrm_bapi) I am getting error message "Error when scheduling the query(JOB_CLOSE)".
Could you please find what this error is?
Thanks,
Uday.

Hi Uday,
This problem can occur if you changed the query definition.
In this case the query definition would be inconsistent with the existing extract structure.
Certain Meta information is maintained with each extract defined using the RSCRM_BAPI. If the definition of the query is changed and you need to use the same extract table then you need to delete the extract using the report RSCRMBW_DEL_ALL_EXTRACTS selecting the extract you want
to delete.
After this you could use the same table name for any further extract that you need to create.
One caution is that the extract table should not be deleted through any other transaction before you run the report.
Rgds,
Colum

Error 1 when scheduling upload

Similar Messages

Maybe you are looking for