Error 1 whilst restoring

I've tried everything to complete the restore. My laptop is completely updated, I have the latest itunes, the iphone is up to date also, however part way through the restore error 1 comes up. Apple advises to try a couple of times, which I have but still nothing. Just wondering if anyone else encountered this problem and if so, what was done about it. Any other helpful suggestions appreciated.

If you mean error -1, this is usually a hardware problem
"Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service."
iTunes: Specific update-and-restore error messages and advanced troubleshooting

Similar Messages

HT201210 i am keep getting unknown error whilst restoring my iphone 3

How can i get my iPhone 3 restore and
update

what error code is it?
Check out http://support.apple.com/kb/ts3694 for causes and solutions !

File name in msdb.dbo.backupset no longer matches the actual file name on the storage media. Error 3013 Restore Database is terminating abnormally.

Thanks in advance for taking the time to read this and comment. Platform: Windows Server 2008 R2 Enterprise Edition SP1 (X64) Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64) Jun 17 2011 00:54:03 Copyright (c) Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)Problem Description: The file name recorded in the msdb.dbo.backupset (sans the extension) no longer matches the actual file name written to the backup media which is
in this case a NETAPP NAS storage share. Example:
Mohave_backup_2014_03_14_233001_1158878.bak      (from NETAPP NAS filer)
Mohave_backup_2014_03_16_233001_4167237             (from MSDB.dbo.backupset), as you can see, the last 7 digits (chars) of the file name are different, although the date and time are identical. The
file names had previously been matching perfectly. The first occurance of this problem occured on 03/13/2014 at 5:00 AM MST. The error generated by the job was:
Date  3/14/2014 10:29:23 AM
Log  Job History (Refresh - Restore Mohave_93_DEV AD HOC)
Step ID  1
Server  OurDevServer
Job Name  Refresh - Restore Mohave_93_DEV AD HOC
Step Name  Restore Mohave_93_DEV
Duration  00:00:01
Sql Severity  0
Sql Message ID  50000
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted  0
Message
Executed as user: OurDomain\OurNetworkServiceLogin. Restore Mohave Prod to Mohave_93_DEV - ERROR: 3013 RESTORE DATABASE is terminating abnormally. [SQLSTATE 01000] (Message 50000). The step succeeded.

Olaf:
Thanks for your reply. Sorry, my bad. I inadvertently copied wrong [name] form the msdb.dbo.backupset. On 3/13 and 3/14, the two file names did not match. In trying to select another example to show you this morning, I found that the names are now matching!
What I was doing was to create dynamic t-sql to retrieve the latest prod backup of the database, and then restore it with move to the development server. This is an ad-hoc job that the developers can run by themselves whenever they require a refresh. Unfortunately,
we only keep 3 days worth of backups for these databases, so the original disk file I was trying to use to restore no longer exists. Researching the original error, one of the error descriptions was that the restore could not find the file requested.
I thought this very strange since I get the file name directly from the backupset table. Further research did indeed show that the file names were different, but unfortunately, I failed to save the details of the file names. Anyway, in looking for a new example
to show you this morning, I have found that the file names are indeed matching exactly again. If this error pops up again, I will be sure to save all details and re-post.
Thanks, regards and best wishes to you and yours,

"Print Error Whilst Printing" when trying to print or save as PDF

I don't understand why i can't just print - everytime it says Print error whilst printing whether i'm actually trying to save it or print it. I'm very new to using Macs - 3 days now so not used to how they work yet but i'm running Tiger 10.4.8 on an Intel Mac if anyone can help me please!

Hello Dorin and thank you for your answer.
Yes page 5 is a double page spread and this is not the only one in my book! I will modify the page 5 to see if the error message will appear at the next double page spread....
Thanks again
Richard

Error while restoring back up

Hi Team ,
Facing below error, while restoring in SQL.please help
The media family on device 'C:\Test\fwsmall-12-3_supraekeybackup_virtusa.bak' was created using Microsoft Tape Format version 1.240. SQL Server supports version 1.0.
Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
-Kotamarthi

Hello,
Are you facing issue as mentioned in below article
http://blog.sqlauthority.com/2010/10/24/sql-server-corrupted-backup-file-and-unsuccessful-restore/
what does following return
restore verifyonly from disk='backup location'
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Getting the Error while restoring the iPhone3 back-up to iPhone4s

When i try to restore the back-up getting the error and restore is not happening with the iPhone3 data in iPhone4.
I have observed the below error in MobileBackUp log
Can any one help me in how to restoring the data successfuly.
2013-12-05 02:14:50.030 WARNING: Restoring d2a4213d82e5f1878653cbc6f7218d88df718326 from e56606f445f5ebc4bdd394dcdcb13964012779c7
2013-12-05 02:15:25.079 ERROR: Restore message response: 1 Error copying iTMS KVS db from local to backup path (MBErrorDomain/1). Underlying error: Error opening SQLite file: unable to open database file (14) at path "/var/.backup.i/var/mobile/Library/com.apple.itunesstored/kvs.sqlitedb" (MBErrorDomain/16).
2013-12-05 02:15:25.081 WARNING: No MobileSync error code defined for error code: 1
2013-12-05 02:15:25.082 ERROR: Restore error: -1

set the new iphone up as a new device, update ios if needed then restore from backup
Peace, Clyde

File System error while restoring a backup from analysis server to another

Hi
I have restored an analysis database backup to from server 1 (sql server 2008) to server 2(sql 2008) and its working fine
and now am trying to restore another database from analysis server server 3 (sql 2005) to server 2 (sql 2008 )but its giving error that
File System error occured while opening the file G:\ProgramFiles\MSAS10.MSSQLSERVER\OLAP\Backup\Workordermodule.0.db\WomDW1.7.00 ..etc

Hi Maverick,
According to your description, you are experiencing the error when restoring the SSAS 2005 database on SSAS 2008 server, right?
In your scenario, how do you backup your SSAS 2005 database? Please ensure that you backup and restore steps are correct. Here is a blog which describe how to migrate a cube in SQL Server Analysis Services 2005 to SQL Server Analysis Services 2008 step by
step, please refer to the link below.
http://blogs.technet.com/b/mdegre/archive/2010/03/31/migrating-a-cube-in-sql-server-analysis-services-2005-to-sql-server-analysis-services-2008.aspx
Besides, you can import SQL 2005 AS database in SQL 2008 BIDS Project. Then fix AMO warnings and deploy that database on SQL 2008 Server.
http://technet.microsoft.com/en-in/library/ms365361(v=sql.100).aspx
Regards,
Charlie Liao
TechNet Community Support

Error while restoring the backup

HI,
We have taken the offline backup through BRtools but we have used rman to take the backup in init.SID.sap. We have succeeded in taking the backup of the database and it has saved in .S format. Now when we are restoring with Brrestore it is giving the below error. Can any one suggest how to restore the backup.
Copyright (c) 1982, 2007, Oracle. All rights reserved.
RMAN>
RMAN> connect target *
connected to target database: XID (DBID=3524048029, not open)
using target database control file instead of recovery catalog
RMAN> *end-of-file*
RMAN>
host command complete
RMAN>
allocated channel: ORA_MAINT_DISK_1
channel ORA_MAINT_DISK_1: sid=143 devtype=DISK
RMAN>
changed backup piece available
backup piece handle=/archive/offLine/xid/beeqftcz/xid.data5.S recid=1314 stamp=735914182
Changed 1 objects to AVAILABLE status
RMAN>
released channel: ORA_MAINT_DISK_1
RMAN> 2> 3>
allocated channel: dsk
channel dsk: sid=143 devtype=DISK
Starting restore at 29-NOV-10
released channel: dsk
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/29/2010 07:25:24
RMAN-20201: datafile not found in the recovery catalog
RMAN-06010: error while looking up datafile: /oracle/XID/sapdata2/xid_5/xid.data5
RMAN>
Recovery Manager complete.
BR0280I BRRESTORE time stamp: 2010-11-29 07.25.33
BR0279E Return code from 'SHELL=/bin/sh /oracle/XID/102_64/bin/rman nocatalog': 0
BR0536E RMAN call for database instance XID failed
BR0280I BRRESTORE time stamp: 2010-11-29 07.25.33
BR0553E Restore from normal database backup using RMAN failed
BR0359E Restore of /oracle/XID/sapdata2/xid_5/xid.data5 from /archive/offLine/xid/beeqftcz failed due to previous errors
BR0278E Command output of 'SHELL=/bin/sh /oracle/XID/102_64/bin/rman nocatalog':
Recovery Manager: Release 10.2.0.4.0 - Production on Mon Nov 29 07:24:00 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
RMAN>
RMAN> connect target *
connected to target database: XID (DBID=3524048029, not open)
using target database control file instead of recovery catalog
RMAN> *end-of-file*
RMAN>
host command complete
RMAN>
allocated channel: ORA_MAINT_DISK_1
channel ORA_MAINT_DISK_1: sid=141 devtype=DISK
RMAN>
changed backup piece available
backup piece handle=/archive/offLine/xid/beeqftcz/xid.data4.S recid=1307 stamp=735914046
Changed 1 objects to AVAILABLE status
RMAN>
released channel: ORA_MAINT_DISK_1
RMAN> 2> 3>
allocated channel: dsk
channel dsk: sid=141 devtype=DISK
Starting restore at 29-NOV-10
released channel: dsk
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/29/2010 07:25:24
RMAN-20201: datafile not found in the recovery catalog
RMAN-06010: error while looking up datafile: /oracle/XID/sapdata2/xid_4/xid.data4
RMAN>
Recovery Manager complete.
BR0280I BRRESTORE time stamp: 2010-11-29 07.25.33
BR0279E Return code from 'SHELL=/bin/sh /oracle/XID/102_64/bin/rman nocatalog': 0
BR0536E RMAN call for database instance XID failed
BR0280I BRRESTORE time stamp: 2010-11-29 07.25.33
BR0553E Restore from normal database backup using RMAN failed
BR0359E Restore of /oracle/XID/sapdata2/xid_4/xid.data4 from /archive/offLine/xid/beeqftcz failed due to previous errors
BR0359E Restore of /oracle/XID/sapdata2/xid_1/xid.data1 from /archive/offLine/xid/beeqftcz failed due to previous errors
BR0359E Restore of /oracle/XID/sapdata2/xid_2/xid.data2 from /archive/offLine/xid/beeqftcz failed due to previous errors
BR0359E Restore of /oracle/XID/sapdata4/xiddb_3/xiddb.data3 from /archive/offLine/xid/beeqftcz failed due to previous errors
Regards,
Manikanth.

Is your backup got completed succesfully?

ORA-19870: error while restoring backup piece -- file exists in ASM

[oracle@rs1pre92dvdbsa01 ~]$ rman target sys/c9nv9sd9t9f11e@mdm11 auxiliary /
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Oct 29 10:41:38 2010
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: MDM (DBID=1485385044)
connected to auxiliary database: MDM (not mounted)
RMAN> duplicate target database for standby;
Starting Duplicate Db at 29-OCT-10
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=13 device type=DISK
contents of Memory Script:
restore clone standby controlfile;
executing Memory Script
Starting restore at 29-OCT-10
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece +MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece +MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607
ORA-19505: failed to identify file "+MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607"
ORA-17503: ksfdopn:2 Failed to open file +MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607
ORA-15012: ASM file '+MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607' does not exist
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 10/29/2010 10:42:00
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restore
RMAN>
ASMCMD [+mdmdg2] > cd mdm1
ASMCMD [+mdmdg2/mdm1] > ls
CONTROLFILE/
FLASHBACK/
ONLINELOG/
arch/
autobackup/
ASMCMD [+mdmdg2/mdm1] > cd autobackup
ASMCMD [+mdmdg2/mdm1/autobackup] > ls
2010_10_29/
ASMCMD [+mdmdg2/mdm1/autobackup] > cd 2010_10_29
ASMCMD [+mdmdg2/mdm1/autobackup/2010_10_29] > ls
s_733654605.283.733654607
As seen in asmcmd "s_733654605.283.733654607" file exists in +mdmdg2/mdm1/autobackup/2010_10_29 then why it is complaning that it can't find the file.
and also How to open/view file in asmcmd

[oracle@rs1pre91dvdbaa01 utl]$ sqlplus / as sysasm
SQL*Plus: Release 11.2.0.1.0 Production on Fri Oct 29 13:11:44 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup;
ORA-01078: failure in processing system parameters
ORA-29701: unable to connect to Cluster Synchronization Service
I have rebooted both the RAC servers and I can't start database?
I was under the impression that Database should be automatically started as part of Clusterware
Please help urgent.

HT1222 error 14 restore ipad 2 GSM iOS 5.1.1

error 14 restore ipad 2 GSM iOS 5.1.1

I spoke to Apple Tech Support. They were very helpfull and resolved the problem. First I was told to put into airplane mode for 15 seconds then go back to problem. That didnt help but apparently this solves lots of network type faults. Next I was told to reset the network that also didn't work. Finally then i was told to Hold both buttons until the screen goes black, when the Apple symbol returns release buttons. When the pad rebooted this cured the problem and i was able to tether again.
It seems you try this first on any faults it will often resolve problems. I've added this in hope that it will help others with any type of fault.
Can I thank you for all your help. Kind Regards Keith

My ipod touch is stuck up at Apple Logo, I have tried to update and restore through ITunes but no use, It stuck up again at Apple Logo with no Error, after restoring it showes your ipod is restore but still apple logo won't go

My ipod touch is stuck up at Apple Logo, I have tried to update and restore through ITunes but no use, It stuck up again at Apple Logo with no Error, after restoring ITunes showes your ipod is restore but still apple logo won't go, Due to new Laptop, I do not have any backup, therefore i have tried to select new Ipod touch and goes through step by step procedure but no use, Please help what to do?

i tried reseting my ipod today and had a similar problem... it wont be recognized by itunes, the only thing i havent tried is putting it into DFU mode, or the state that it is in when u recieve it telling u to connect it to itunes.i recommend putting it into DFU mode. http://www.youtube.com/watch?v=34v8HMC9B98 this should better explain it. if i find another way, ill keep u updated

Rendering error whilst writing to file /filename etc./ An output module failed

I'm trying to render my composition in the latest AE CC 2014. I get the following error with all composition sizes and with different codecs: Rendering error whilst writing to file /filename etc./ An output module failed. The file may be damaged or corrupted (-1610153464). Can anyone help me sort this problem?

AE build number? Codec used? System OS?

When i got my new iphone 4, its in recovery mode. while restroing with itunes, im getting error at restoring firmware stage? what could be the reason? pls help me for solution.

when i got my new iphone 4, its in recovery mode. while restroing with itunes, im getting error at restoring firmware stage? what could be the reason? pls help me for solution.

You got a new iPhone 4, and out of the box the phone is in recovery mode? If that's the case, return it.
If you don't want to do that. what error code are you getting?

RMAN error when restoring controlfile from tape

Hi,
We have a Production database with instance name PROD.
We use Symantec Netbackup software to backup this database to tape library.
We want to test some recovery scenarios on a test server. So we want to restore the production backups from Tape to this test server.
We did the following:
Cloned the ORACLE Home to the Test Server.
Changed the db_name parameter to PROD and also set ORACLE_SID to PROD.
then we connected to RMAN and ran the following command to restore the control files:
RMAN> run {
set dbid 4155532403
set controlfile autobackup format for device type 'sbt_type' to '%F';
set until time "to_date('16/12/2012:10:13:37','dd/mm/yyyy:hh24:mi:ss')";
allocate channel t1 device type 'sbt_tape';
SEND 'NB_ORA_SERV=riysvbkp-001,NB_ORA_CLIENT=lh-erp';
restore controlfile to '/testerp/dbexec/tmp/cf1.ctl' from autobackup;
executing command: SET DBID
database name is "PROD" and DBID is 4155532403
executing command: SET CONTROLFILE AUTOBACKUP FORMAT
executing command: SET until clause
allocated channel: t1
channel t1: SID=171 device type=SBT_TAPE
channel t1: Veritas NetBackup for Oracle - Release 7.1 (2011082510)
sent command to channel: t1
Starting restore at 17-DEC-12
channel t1: looking for AUTOBACKUP on day: 20121216
channel t1: AUTOBACKUP found: c-4155532403-20121216-01
channel t1: restoring control file from AUTOBACKUP c-4155532403-20121216-01
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 12/17/2012 08:34:41
ORA-19870: error while restoring backup piece c-4155532403-20121216-01
ORA-19507: failed to retrieve sequential file, handle="c-4155532403-20121216-01", parms=""
ORA-27029: skgfrtrv: sbtrestore returned error
ORA-19511: Error received from media manager layer, error text:
Failed to process backup file <c-4155532403-20121216-01>
Here you can see that AUTOBACKUP is found but RMAN is unable to process the backup piece.
I am not able to see any errors in the log files. Please advise.
Thanks,
Muneer.

Thanks.
The earlier error is gone and now I am getting the following error:
channel t1: looking for AUTOBACKUP on day: 20121216
channel t1: AUTOBACKUP found: c-4155532403-20121216-01
channel t1: restoring control file from AUTOBACKUP c-4155532403-20121216-01
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 12/17/2012 14:34:25
ORA-19870: error while restoring backup piece c-4155532403-20121216-01
ORA-19507: failed to retrieve sequential file, handle="c-4155532403-20121216-01", parms=""
ORA-27029: skgfrtrv: sbtrestore returned error
ORA-19511: Error received from media manager layer, error text:
Backup file <c-4155532403-20121216-01> not found in NetBackup catalog

ORA-19870: error while restoring backup piece

RMAN> duplicate target database for standby;
Starting Duplicate Db at 30-06-2011 10:39:45
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=488 device type=DISK
contents of Memory Script:
restore clone standby controlfile;
executing Memory Script
Starting restore at 30-06-2011 10:39:45
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp
ORA-19505: failed to identify file "/dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp"
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
failover to previous backup
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /dborafiles/mdm_bn/mdm/backup/MDM11_rgmg62jn_1_1.ctl_bkp
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece /dborafiles/mdm_bn/mdm/backup/MDM11_rgmg62jn_1_1.ctl_bkp
ORA-19505: failed to identify file "/dborafiles/mdm_bn/mdm/backup/MDM11_rgmg62jn_1_1.ctl_bkp"
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
failover to previous backup
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755169400_70rd79x9_.bkp
user interrupt received
ORACLE error from target database:
ORA-03114: not connected to ORACLE
File permission on the primary
[oracle@bnl11237dat01 MDM1]$ ls -l /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp
-rw-rw-rw- 1 oracle oinstall 22216704 Jun 30 10:33 /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp
We are getting the above error when creating the standby on different host to primary. Please can I know how to resolove this error.

Please copy the backup pieces and archivelogs from the target database to the standby database..Do remember that the location on the standby database node must be same as of the target database node..
For example : if the bkp pieces of target db node is on '/ora_backup/target_name/bkp' then the same locaiton must be created on standby
if the archivelogs of target db node is on '/ora_backup/target_name/arch' then the same location must be created on standby
Hope its clear.

I get an error when restoring my ipad to factory setting

I get an error when restoring my ipad to factory setting

What does the error say?
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

Error 1 whilst restoring

Similar Messages

Maybe you are looking for