Error 1001 what is it

i have just bought a new HP Pavilion DV6 laptop using windows 7 ultimate itunes seams to work ok but when i check my computor in the morning i have an itunes error message 1001 & my itunes has dissconnected my iphone has anybody else had this problem & if so how did you fix it ?

Hi Dinu,
Use FM:
RH_RELATION_INSERT
RH_RELATION_MAINTAIN
Regards
Sreekanth

Similar Messages

  • Flex Error #1001: Digest mismatch with RSL error

    I apologize if this is not the correct location for this question but it was the closest I could find.
    I am working in salesforce trying to add a new content pack.  This screen uses a tool written in flash.  The screen that comes up is an error with the following:
    Flex Error #1001: Digest mismatch with RSL
    https://cs13.salesforce.com/_swf/121310/sfc/flex/framework_3.5.0.12683.swf.
    Redeploy the matching RSL or relink your application with the matching
    library.
    I have been working with SalesForce support but they don't have a clue and want to punt to Adobe. 
    The support staff at SalesForce has no trouble accessing the page with the flash control from thier pc.  I have tried several computers in my office and from several browsers (IE 9 and Chrome).  I have reinstalled Flash Player 11 and cleared browser caches.  Nothing seems to work.
    It has to be something common to computers in my office or my network.  All of the information I can find on the Internet talks about rebuilding the application and redeploying it.  I can't do that since this is part of SalesForce and not something I own.  Also, it works for them on their computers.
    I am running windows 7 64 bit.  I have McAfee running (and have checked that Flash is not blocked).
    The flash player itself works when I go to the Adobe site and try other content.
    The only other odd thing I have is that my hard drive is encrypted.
    Any ideas?
    Thanks,
    Mike

    Chris,
      I have cleared the browsser and flash cache data then restarted browswers and windows. Still no luck.  I reverted the flash player back to 10.3 after following the instructions in the link you provided for a clean install but still get the error.  SalesForce did not state what version of FlashPlayer they are using but I will check with them later today. 
    All of the machines that I have tested on have been at the office and all have encrypted hard drives with PGP desktop.  I am going to try my laptop on my home network tonight to see if we are blocking something during the download.
      This is driving me nuts.  I know is it something specific to the machines in the office or the office network but I can't find it.
    Thanks for your help.  Please let me know if you have any other ideas.
    Mike

  • I am getting error 1001 on my ipad 2 while upgrading updates

    When click to upgrade updates on my ipad 2 i get error 1001 and says please try again later.

    What iOS version is currently on your iPad?
    The error number is not included in the 2nd link below.
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • How to deal with "Error 1001. The specified service already exists" when install a service using installer package?

    Hi everybody,
    I wrote a "Class Library" project which is a service using Visual Stodio 2008 recently, then tried to use a Visual Studio 2008
    Setup Project to install it.
    Here is what I did for the "Class Library":
    1. Finish the program.cs, Service.cs
    2. Add Installer
    3. Change the serviceInstaller so that "StartType" to be Aotumatic
    4. Change the ServiceProcessInstaller2 so that "Account" to be LocalSystem
    5.
    6. Click in F5 (Start Debugging)
    Here is what I did for the Setup Project:
    1. Add the exe file built from the "Class Library" project to the Application Folder
    2. On the Custom Action Editor, add the exe file from 1 to Install and Commit
    3. Change the property of the project so that "RemovePreviousVersion" to be true
    4. Click on F6(Build Solution)
    Then I tried to run the msi file from the built of the Setup Project. Because I modified the two projects serveral times, I uninstalled the Class Library using "Control Panel->Add or Remove Programs" before I reinstall. Two things I notived:
    1. After unstall, the registry was not cleaned up about the installed program
    2. After several rounds install/uninstall, I got "Error 1001. The specified service already exists"
    My questions are:
    1. How to cleanup the registry when uninstall a program?
    2. How to deal with the "Error 1001. The specified service already exists"?
    3. Did I do anytbing wrong with the "Class Library" or the "Setup Project"?
    Thanks a lot!
    Helen

    Hi Simon, not a problem!
    I spent some more time on this and here are few more notes:
    it is called Major Upgrade, when you are installing new version of the product upon a previous one and
    MSI supports 2 strategies:
    Strategy 1. Install a new version and uninstall previous one. (Install a new version right upon previously installed version (file merging is performed based on dll version number) and the delete previously
    installed files)
    Strategy 2. Uninstall previous version and install a new one (Delete all previous files and install from scratch new files.)
    From the first look it seems that 1st strategy is weird and buggy. But, remember, MSI is great because it's transactional!!! That means that if once some of the phases (Installation, Uninstallation, Rollback, Comit) fails, your machine
    will be reverted to the previous state and it'll be still functional. 
    Let's consider both strategies:
    Consider you have installed product_v1.msi and you want to install product_v2.msi.
    Strategy 1
    1. MSI engine copies files from Product_v1 directory to TEMP directory
    2. MSI engine merges files based on the assembly version (between v1 and v2)
    3. Once merging is completed successfully it removes files in TEMP (RemoveExistingProducts  action triggers it) and you got product_v2 installed, otherwise if it fails MSI engine revert machine to V1 and copies previous files from TEMP.
    Strategy 2
    1. MSI engine tottaly removes all files from v1.
    2. MSI engine installs v2 files and if something goes wrong you cannot revert back, because RemoveExistingProducts  allready worked out and MSI doesn't have files to revert machine back
    I recommend to everybody to use Strategy 1 and leverage MSI transaction functionality. And you can set this strategies by defining sequence of RemoveExistingProducts action. See more info
    here.  So, I think it's not even a bug in VS as I said in the upper post it is default recommened behaviour.
    AND, you got "Error 1001. The specified service already exists"
    because if we follow Strategy 1 MSI engine tries to install Windows Service on top of the existing service and OF COURSE it fails MSI engine (StopServices, DeleteServices actions are executed before actual
    installation and  they look at ServiceControl table). In order to stop service first and delete them you have to fill ServiceContol table of the MSI (and then StopServices, DeleteServices actions will recognize what to they have to stop
    and delete), like this:
    *clip*clip*clip*
    ' see http://msdn.microsoft.com/en-us/library/windows/desktop/aa371634(v=vs.85).aspx for more info
    ' Update the Service Entry to stop and delete service while uninstalling
    query = "INSERT INTO ServiceControl (ServiceControl, Name, Event, Arguments, Wait, Component_) VALUES ('MAD_Service', 'Service name', '160', '', '1', '"
    + componentName + "')"
    Set view = database.OpenView(query)
    : CheckError
    view.Execute : CheckError
    ' Update the Service Entry to stop and delete service while installing
    query = "INSERT INTO ServiceControl (ServiceControl, Name, Event, Arguments, Wait, Component_) VALUES ('MAD2_Service', 'Service name', '10', '', '1', '"
    + componentName + "')"
    Set view = database.OpenView(query)
    : CheckError
    view.Execute : CheckError
    *clip*clip*clip*
    We can uninstall service first by following Strategy 2, but then we lose transactional support.
    So, Simon did I encourage you to change your code a bit?:)
    And, btw, if you don't want to change the strategy, please don't rely on SequenceID in MSI table, it can be change, you have to get the at the runtime.
    Hope it will help to everybody!
    See also more advanced explanation of how MSI works
    here.
    Truly yours, Marat

  • Problem updating from Acrobat 10.1.10 to 11. Error 1001, and am told to connect to update server. When I activated the installer, message said Install failed, contact manufacturer for assistance, so I am.

    I am using a 2011 MacBook Pro, running OS X 10.9.5.  Have been using Acrobat 10.1.10, but got a pop-up notice from Adobe today, saying that it had been awhile since last logged on and my software was due for an update. However, after downloading the update Acrobat 11, the updater seems to be unable to FIND the file to update, so it asks me to select the file to update. When I found it, the file icon was grayed out, and wouldn't allow me to select it. Gave me a message for "Error 1001". I'm an experienced Mac user, but not a programmer, so I don't know what that means. When I tried to run the installer from the downloaded file, it stopped, saying "Installation Failed" due to encountering an error—which was NOT named or numbered—and that I should contact the manufacturer for assistance. Which I am ATTEMPTING to do, but it appears to be impossible to actually get direct help.
    Suggestions, or better yet, direct answers, would be appreciated.

    Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
    Thanks!

  • RSL Digest error 1001 - only effects 10-15% of our users

    We recently deployed an updated version of a Flash application on website, using the same sdk as for previous versions.
    However, now some users report they cannot load the application and are getting error 1001 reporting that the digest entries do not match for the RSL "framework_3.5.0.12683.swf".
    We used this same library compiled as an RSL with the previous version of our application,  which all could access just fine.
    What I really cannot understand is why only a minority of our users would experience this problem (and most either have up to date plugins etc, or updated to latest version in attempting to get the new application to work), while most can access the application just fine.
    THe only thing that really changed was we now use the swfobject method to embed the flash content, previously we had been using the AC_OETags.js to embed the Flash content...
    Of the users who are effected by this, some ar on Windows, some Mac - and all different browsers to - so there is no pattern whatso-ever to help identify the problem...
    We use Flex SDK 3.5 (but I have Flash Builder set to compile against 4.1 using compatibility mode 3.5) and this is not new this release... (I like being able to access the ASDoc from within FB ;-) )
    Any help much appreciated - thanks in advance,
    Aaron

    Hi Aaron,
    Would you mind reposting this question over on the Flex forums?  This forum is more geared for end users.  In particular, you might want to take a look (or post on) the following thread:
    RSL Error 1001
    I suspect Darrell Loverin would be a good person to ask as he implemented the RSL feature in Flex 3.
    Thanks,
    Chris

  • Error 1001 + Memory Problem

    So after 2 system crashes I went looking online for the cause of the event ID error 1001. My search led me to this forum where I learned about a memory test which ended up informing me that I had a memory problem. 
    Error 1: Playing Minecraft when crash occured
    The computer has rebooted from a bugcheck.  The bugcheck was: 0x0000003b (0x00000000c0000005, 0xfffff96000136884, 0xfffff88009dd4030, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 042511-25880-01.
    XML:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
      <Provider
    Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck"
    />
      <EventID Qualifiers="16384">1001</EventID>
      <Version>0</Version>
      <Level>2</Level>
      <Task>0</Task>
      <Opcode>0</Opcode>
      <Keywords>0x80000000000000</Keywords>
      <TimeCreated
    SystemTime="2011-04-26T03:30:32.000000000Z" />
      <EventRecordID>153358</EventRecordID>
      <Correlation
    />
      <Execution
    ProcessID="0" ThreadID="0" />
      <Channel>System</Channel>
      <Computer>llama-7</Computer>
      <Security
    />
      </System>
    <EventData>
      <Data Name="param1">0x0000003b (0x00000000c0000005, 0xfffff96000136884, 0xfffff88009dd4030, 0x0000000000000000)</Data>
      <Data Name="param2">C:\Windows\MEMORY.DMP</Data>
      <Data Name="param3">042511-25880-01</Data>
      </EventData>
      </Event>
    Error 2: Exiting Starcraft 2 when crash occured
    The computer has rebooted from a bugcheck.  The bugcheck was: 0x0000007e (0xffffffffc0000005, 0xfffff880043ca6fa, 0xfffff88003f45788, 0xfffff88003f44fe0). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 042711-29421-01.
    XML:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
      <Provider
    Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck"
    />
      <EventID Qualifiers="16384">1001</EventID>
      <Version>0</Version>
      <Level>2</Level>
      <Task>0</Task>
      <Opcode>0</Opcode>
      <Keywords>0x80000000000000</Keywords>
      <TimeCreated
    SystemTime="2011-04-28T03:22:40.000000000Z" />
      <EventRecordID>158441</EventRecordID>
      <Correlation
    />
      <Execution
    ProcessID="0" ThreadID="0" />
      <Channel>System</Channel>
      <Computer>llama-7</Computer>
      <Security
    />
      </System>
    <EventData>
      <Data Name="param1">0x0000007e (0xffffffffc0000005, 0xfffff880043ca6fa, 0xfffff88003f45788, 0xfffff88003f44fe0)</Data>
      <Data Name="param2">C:\Windows\MEMORY.DMP</Data>
      <Data Name="param3">042711-29421-01</Data>
      </EventData>
      </Event>
    So now I come to the community with a cry for help. I am a pretty tech savvy guy but I have never come across this kind of problem before and I don't know what to do from here. I have contacted the memory manufacturer and am awaiting a reply.
    Does a memory problem mean I need to replace my RAM?
    EDIT:
    I ran the memory test again and this time Windows
    did not find any memory problem!!
    So now I don't even know what is going on.
    PC Specs:
    Asus CG Series
    Win 7 Home Premium 64-bit edition
    AMD Phenom II X6
    Radeon 5770 Graphics card.
    8GB RAM

    *                        Bugcheck Analysis                                   
    SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (7e)
    This is a very common bugcheck.  Usually the exception address pinpoints
    the driver/function that caused the problem.  Always note this address
    as well as the link date of the driver/image that contains this address.
    Arguments:
    Arg1: ffffffffc0000005, The exception code that was not handled
    Arg2: fffff880043ca6fa, The address that the exception occurred at
    Arg3: fffff88003f45788, Exception Record Address
    Arg4: fffff88003f44fe0, Context Record Address
    Debugging Details:
    EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
    FAULTING_IP:
    dxgmms1!VIDMM_MEMORY_SEGMENT::EvictResource+f3a
    fffff880`043ca6fa 4d8b1b          mov     r11,qword ptr [r11]
    EXCEPTION_RECORD:  fffff88003f45788 -- (.exr 0xfffff88003f45788)
    ExceptionAddress: fffff880043ca6fa (dxgmms1!VIDMM_MEMORY_SEGMENT::EvictResource+0x0000000000000f3a)
       ExceptionCode: c0000005 (Access violation)
      ExceptionFlags: 00000000
    NumberParameters: 2
       Parameter[0]: 0000000000000000
       Parameter[1]: ffffffffffffffff
    Attempt to read from address ffffffffffffffff
    CONTEXT:  fffff88003f44fe0 -- (.cxr 0xfffff88003f44fe0)
    rax=fffff8a002cdcbd0 rbx=0000000000000000 rcx=ffdff8a010f6f0e0
    rdx=fffff8a00d5acec0 rsi=fffff8a010f6f010 rdi=0000000000000000
    rip=fffff880043ca6fa rsp=fffff88003f459c0 rbp=fffffa8008ec9000
     r8=0000000000001000  r9=0000000000000000 r10=0000000000000001
    r11=ffdff8a010f6f118 r12=0000000000000000 r13=0000000000000001
    r14=fffffa8008a77ac0 r15=fffff8a010f6f118
    iopl=0         nv up ei ng nz na po cy
    cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010287
    dxgmms1!VIDMM_MEMORY_SEGMENT::EvictResource+0xf3a:
    fffff880`043ca6fa 4d8b1b          mov     r11,qword ptr [r11] ds:002b:ffdff8a0`10f6f118=????????????????
    Resetting default scope
    DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
    PROCESS_NAME:  System
    CURRENT_IRQL:  0
    ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
    EXCEPTION_PARAMETER1:  0000000000000000
    EXCEPTION_PARAMETER2:  ffffffffffffffff
    READ_ADDRESS:  ffffffffffffffff
    FOLLOWUP_IP:
    dxgmms1!VIDMM_MEMORY_SEGMENT::EvictResource+f3a
    fffff880`043ca6fa 4d8b1b          mov     r11,qword ptr [r11]
    BUGCHECK_STR:  0x7E
    LAST_CONTROL_TRANSFER:  from fffff880043ba25d to fffff880043ca6fa
    STACK_TEXT: 
    fffff880`03f459c0 fffff880`043ba25d : fffffa80`08a77ac0 fffff8a0`10f6f010 fffffa80`0b18f000 fffffa80`08ec9000 : dxgmms1!VIDMM_MEMORY_SEGMENT::EvictResource+0xf3a
    fffff880`03f45b30 fffff880`043b5358 : fffffa80`08db9810 00000000`00000080 00000000`00000000 fffff880`03f45ca0 : dxgmms1!VIDMM_GLOBAL::ProcessDeferredCommand+0x96d
    fffff880`03f45c50 fffff880`043d316d : fffffa80`00000000 fffffa80`06a15010 00000000`0000000f fffff880`043d4f09 : dxgmms1!VidMmiProcessTerminationCommand+0x4c
    fffff880`03f45ca0 fffff880`043d23f8 : fffff880`0308cfc0 fffffa80`077c2c00 00000000`00000000 fffffa80`06a15010 : dxgmms1!VidSchiSubmitDeviceCommand+0x39
    fffff880`03f45cd0 fffff880`043d1e96 : 00000000`00000000 fffffa80`077c2c00 00000000`00000080 fffffa80`06a15010 : dxgmms1!VidSchiSubmitQueueCommand+0xb0
    fffff880`03f45d00 fffff800`03169cce : 00000000`0ce38485 fffffa80`08a88a10 fffffa80`069aa990 fffffa80`08a88a10 : dxgmms1!VidSchiWorkerThread+0xd6
    fffff880`03f45d40 fffff800`02ebdfe6 : fffff880`03088180 fffffa80`08a88a10 fffff880`03093040 fffff880`0122c384 : nt!PspSystemThreadStartup+0x5a
    fffff880`03f45d80 00000000`00000000 : fffff880`03f46000 fffff880`03f40000 fffff880`03f45680 00000000`00000000 : nt!KxStartSystemThread+0x16
    SYMBOL_STACK_INDEX:  0
    SYMBOL_NAME:  dxgmms1!VIDMM_MEMORY_SEGMENT::EvictResource+f3a
    FOLLOWUP_NAME:  MachineOwner
    MODULE_NAME: dxgmms1
    IMAGE_NAME:  dxgmms1.sys
    DEBUG_FLR_IMAGE_TIMESTAMP:  4ce799c1
    STACK_COMMAND:  .cxr 0xfffff88003f44fe0 ; kb
    FAILURE_BUCKET_ID:  X64_0x7E_dxgmms1!VIDMM_MEMORY_SEGMENT::EvictResource+f3a
    BUCKET_ID:  X64_0x7E_dxgmms1!VIDMM_MEMORY_SEGMENT::EvictResource+f3a
    Followup: MachineOwner
    0: kd> lmvm dxgmms1
    start             end                 module name
    fffff880`0439a000 fffff880`043e0000   dxgmms1    (pdb symbols)          c:\symbols\dxgmms1.pdb\0901C357E9E846EE8C2FBCC8107163201\dxgmms1.pdb
        Loaded symbol image file: dxgmms1.sys
        Image path: \SystemRoot\System32\drivers\dxgmms1.sys
        Image name: dxgmms1.sys
        Timestamp:        Sat Nov 20 10:49:53 2010 (4CE799C1)
        CheckSum:         00047A89
        ImageSize:        00046000
        File version:     6.1.7601.17514
        Product version:  6.1.7601.17514
        File flags:       0 (Mask 3F)
        File OS:          40004 NT Win32
        File type:        3.7 Driver
        File date:        00000000.00000000
        Translations:     0409.04b0
        CompanyName:      Microsoft Corporation
        ProductName:      Microsoft® Windows® Operating System
        InternalName:     dxgmms1.sys
        OriginalFilename: dxgmms1.sys
        ProductVersion:   6.1.7601.17514
        FileVersion:      6.1.7601.17514 (win7sp1_rtm.101119-1850)
        FileDescription:  DirectX Graphics MMS
        LegalCopyright:   © Microsoft Corporation. All rights reserved.
    The BSOD is caused by dxgmms1.sys which belongs to DirectX Graphics MMS.
    Try to install that and check if this solve your problem:
    http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2da43d38-db71-4c1b-bc6a-9b6652cd92a3&displayLang=en
    This posting is provided "AS IS" with no warranties or guarantees , and confers
    no rights.
    Microsoft Student Partner
    Microsoft Certified Professional
    Microsoft Certified Systems Administrator: Security
    Microsoft Certified Systems Engineer: Security
    Microsoft Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
    Microsoft Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration
    Microsoft
    Certified Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration

  • Won't update (error-1001)

    Hi!
    I've been trying many times to run the software update but everytime I do it it goes the same. It starts like is downloading but at the end give me the error -1001 and tell me that check my network connection. My network connection is ok because I could you search on the web and use the msn. I try it using the wireless and ethernet and still the problem. What could it be? Thanks.

    Anti, welcome, try the Combo Udaters.....
    http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10410comboupdat ev11intel.html

  • RSL Error 1001

    Flex Error #1001: Digest mismatch with RSL
    framework_3.0.189825.swf. Redeploy the matching RSL or relink your
    application with the matching library.
    Hello good people,
    I have tried fixing this according to the following URL's
    instructions:
    http://www.duzengqiang.com/blog/article.asp?id=681
    but it's either not doing it or I keep scewing it up.
    I have also read:
    http://livedocs.adobe.com/labs/flex3/html/help.html?content=rsl_07.html
    and it doesn't look like I'm screwing it up, but I could me missing
    something. The real issue is that I tried to show this at my
    customer's location and now no matter what I do, I can't seem to
    either get rid of the files that are in the browser cache or it
    just doesn't work. It only does it when deployed to the server. It
    never happens on my development machines.
    I don't have a computer here that it doesn't work on, even my
    wife's machine runs it just fine and she doesn't have a development
    environment, so I'm a little confused as to how to handle this.
    If someone has a ready answer i would appreciate it. If you
    need to view the site to experience the issue then send me a
    private message on this forum and I'll send you the link.
    Thanks,

    Okay Darrell,
    Your file worked. I was able to run with ,45, after uploading
    it to the server. I believe I understand why this was happening.
    You can tell me if I’m wrong, if it matters. Below version
    ,115, the player RSL’s are not signed and the player loads
    the swc file, not the swz file.
    This became apparent to me when I saw that on the FLEX Build
    Path-->Library Path Tab, there existed a build path library of:
    framework.swc.
    Expanding this library revealed an RSL URL property with the
    signed library -- framework_3.0.189825.swz – as the value.
    Underneath the RSL URL as an attached property is listed the
    Failover RSL URL with a value of -- framework_3.0.189825.swf --.
    I’m a simple man, so I’ll just put it this
    way… When the player can’t make sense of an swz file
    because it can’t load signed files, it looks for the swf
    file. Since the swf is not signed, it has a digest that links it
    with the application to provide security protection. For some
    reason the framework_3.0.189825.swf library that came with the sdk
    and by default was being used by my application was not linked
    properly. By the way, this happened on a new install to a virgin
    machine.
    Okay, I used the ant file, and had to modify it to get it to
    work. For one, it’s not well formed, missing a /java end tag.
    Second, and this is what I need you to verify for me, I don’t
    know why the line
    OpenElementTag--arg line=&quot;--digest.rsl-file
    @{rsl-dir}/@{swc-name}.swf --digest.swc-path
    @{swc-dir}/@{swc-name}.swc&quot; --CloseElementTag
    would work because the swc-name needs to be framework in
    order for the optimizer to output it with the correct name (at
    least to stay within the naming conventions we are using). So what
    happens is the argument line --digest.rsl-file
    @{rsl-dir}/@{swc-name}.swf cannot find the swf that was created by
    the optimizer since the swc-name variable does not match the name
    that was created with the optimizer (--output
    '@{rsl-dir}/@{swc-name}_3.0.${build.number}.swf' =
    framework_3.0.189825.swf). I tried to use the ${build.number}
    again, but it must be getting assigned from the metadata of the
    optimizer, I can’t quite figure it out. I finally got it to
    work, by hard coding the name in like so…
    OpenElementTag--arg line=&quot;--digest.rsl-file
    @{rsl-dir}/framework_3.0.189825.swf --digest.swc-path
    @{swc-dir}/@{swc-name}.swc&quot;--CloseElementTag
    I’ll get back into my Ant documentation and see if I
    can figure out how to code for that.
    I am attaching the build file I created. Place it in the
    root\sdks\3.0.0\frameworks directory and it should work right out
    of the box. It is setup to use the standard directories. This is a
    windows installation, but it should work on Linux.
    I hope we can put this to rest. Please correct me if I have
    misunderstood what is happening. You have my heartfelt thanks for
    your assistance and if you're at the 360 conference, let me know
    and I'll buy you a draft.
    Sincerely,

  • Network Error -1001

    I have a MacBook that is suddenly unable to make certain connections wirelessly.
    I am able to connect to the internet just fine and browse around, but when I try to search for Software Updates or even upload pics to Flickr, I get a notice that I have a Network error (-1001).
    I have tried 2 separate wireless access points at work with no luck with either. I have another Macbook here that did find and load Software Updates from my airport quickly and without problem.
    Network Diagnostics says I have no problem with my internet connectioin. I have run the Disk Utility to repair permissions and Disk Warrior, but the problem persists.
    Any ideas?

    Yes - I just had the same problem when I upgraded my Mini to 10.5. Software update was able to connect to the internet and tell me I needed to install a load of updates, but when I tried, I got this; "A networking error has occurred: Cannot open file (-3001). Make sure you can connect to the Internet, then try again."
    Clearly this is absurd and likely to lead less-computer-savvy people to want to throw things out of high windows and curse Apple roundly for the stupid contradiction. Apple - please fix this!
    A work-around is to go to http://www.apple.com/support/downloads/ - download what you need (listed in the software update window) and install each package separately - I just did that. It takes longer and it's a bit more 'techy' than it really should be - but it does work.

  • I got an error message while burning a cd in itunes - "The attempt to burn a disc failed.  The burn failed because of a medium write error.  What is that and how can i fix it?t

    I got an error message while burning a CD in iTunes - "the attempt to burn a disc failed.  The burn failed because of a medium write error."  What does this mean and how do I fix it?

    The disk you are using probably has a defect, not uncommon on consumer grade disks. Try another disk or better yet another disk from a different manufacturer or at least a different batch.

  • Photoshop CC: When I'm trying to draw a rectangle I can't fill it or create a stoke because there is a message telling me; "Could not complete your request because of a program error. What can I do?

    Photoshop CC: When I'm trying to draw a rectangle I can't fill it or create a stoke because there is a message telling me; "Could not complete your request because of a program error. What can I do?

    It is a mute point now. PSE12 finally failed to the point it locked up the MAC. I had to restore the MAC OS from backup to a point before the PSE12 update.
    The MAC now operates correctly and so does PSE12. I don't think I'll be updating PSE any time soon.

  • I'm setting up my MacBook Air and it tells me to sign in with my apple ID but when I try to sign in it says there's a server error. What do I do? Do I try to skip the step?

    I'm setting up my MacBook Air and it tells me to sign in with my apple ID so that I can set up features like iTunes and iCloud and such but when I try to sign in it says there's a server error. What do I do? Do I try to skip the step? How can I fix this?

    The following previous discussion may help, in particular the last post (1/22/2014 by frankjet7): https://discussions.apple.com/message/21295536#21295536

  • I just purchased the ExportPDF. When I try to convert a pdf document to word online, it gives me an error. What is the problem?

    I just purchased the ExportPDF. When I try to convert a pdf document to word online, it gives me an error. What is the problem?

    Hi sampa1,
    Can you please let us know the error message you are getting while converting PDF to Word. Also, please let us know the steps you are following.

  • I just got an apple at&t iphone 4 and I have it unlocked. But I want to connect it to t-mobile, so I trimmed my sim card and once the phone was unlocked I inserted the sim and it says no sim, activation error. What can I do to fix this? What is wrong?

    I just got an apple at&t iphone 4 and I have it unlocked. But I want to connect it to t-mobile, so I trimmed my sim card and once the phone was unlocked I inserted the sim and it says no sim, activation error. What can I do to fix this? What is wrong?

    JayleneC wrote:
    Wait.. Everything on iTunes worked, but when I insert my sim it brings me to the start were I have to choose my language, etc... Then it says activation error.. Are you sure it's the sim card?
    As you addressed me that is exactly what I said
    Dodgy trimming ??   get a new micro sim from T-Mobile

Maybe you are looking for