Error 1003 after i upgrade from office 2000 to 2003
I just now upgraded form MSOffice 2000 to MSOffice 2003. When I tried to rebuild my app using application builder I get an error 1003 c:\...\internal.llb\excel_save_workbook.vi. Possible reasons: The vi is not executable. I have completely uninstalled and reinstalled office and I have copied the toolkit's files to the harddrive and reinstalled the report generation toolkit from there, according to some of the help files in the knowledge base. Neither worked, although the original error was in _exceldynamicvis.vi and now its in the one mentioned above. nothing else has changed on the system. I can recompile my entire program using ctrl-shift and pressing the arrow at the same time, and there are no problems. Any help would be appreciated.
-Mike
Hi Mike,
Try opening the “excel_save_workbook.vi” and see if there is a broken run arrow in that VI. Hopefully there is. You can then identify the exact node (it will be some invoke node or property node) that will be set to some function or property that is no longer valid in the new Office 2003 API.
The issue here is that upgrading office causes changes in the office API that break other applications that call methods or properties of the old office API. You’ll just have to manually go in and reset the function call to the new function call in each of the VIs to update them with the new office 2003 API.
Hope this helps. Good luck!
Kileen
Similar Messages
-
Problem after upgrading from Office 2000 to Office 2003
All:
Using Excel 2000 under Windows XP, ORACLE 8.01 ODBC driver, and ORACLE 8.1.7.4 database on an RS6000, data retrievals work fine.
Some users are testing PCs upgraded to Office 2003. Using same ORACLE ODBC driver and database, some columns of Excel spreadsheet now are in English and others in a different character set (basically garbage). Again, some are fine, some are not.
Thoughts/Ideas/Opinions??
Thank you in advance.
Mike
Standish Mellon Asset ManagementWhat version of the Oracle ODBC driver are you using? 8.01 is not a driver version-- it should be something like 8.1.7.x.y (assuming you're using one of the 8.1.7 Oracle ODBC drivers).
Since Oracle desupported the 8.1.7 database almost a year ago, do you have the option of upgrading the Oracle client to a supported release (probably 9.2 in your case)?
Unfortunately, I don't know what your particular problem is, but I have certainly seen problems mixing the latest and greatest versions of applications with older versions of the Oracle client.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC -
Directory access problem: upgrade from windows 2000 to 2003
Hi Experts,
We are trying to upgrade from old server(OS - windows2000) to new server (windows 2003).
Its also upgrade from 32bit to 64bit.
Currently we have 5 application servers mounted on a single database server.
When we tried to upgrade in test server, user is not able to acess the server directory(to save file from backround job) inspite of having authorization.
Please let me know if you need further inputs.
Eagerly looking forward to your help.
Best Regards,
Apps> When we tried to upgrade in test server, user is not able to acess the server directory(to save file from backround job) inspite of having authorization.
Error message?
Markus -
Question
Would like to upgrade to Dragon Naturally Speaking 11 from DNS 6 (which would also entail a necessary upgrade from Windows 2000 to 7) but understand after all this expense and trouble, DNS upgrade may not be compatible with Firefox 6?
Main priority is voice activation upgrade. Ideas about how to proceed appreciated!AFAIK, it's been over three years since a WinXP laptop or desktop PC has been sold; I specifically bought a laptop in June 2008 because it was being clearanced by that retail chain to meet Microsoft's deadline, and got it real cheap. It was tagged for the store manager to purchase, but he let me have it because I exceeded his expectations for the services I performed for his store and thought I deserved it. Anything that wasn't made for Vista-compatibility will be very iffy with Win7, IMO - so that basically rules out anything that was made before like Oct or Nov 2007.
Unless another DNS 11 user happens to see this thread and can verify whether it works in Firefox 6.0 or not, I don't what to recommend except for you doing a web search to see what other DNS / Firefox users have to say about compatibility. -
Sound glitches after upgrading from win 2000 to win
Hello!
I have this sound card since 2 years and never had any problems... but since I've upgraded from windows 2000 to windows xp, there's a lot of glitches in the sound coming from the card (it happens with all softwares I use). I'm using a sound blaster audigy 2 nx (latest drivers) on a P4 2GHz with 52 Mb Ram. Thanks in advance!What version of the Oracle ODBC driver are you using? 8.01 is not a driver version-- it should be something like 8.1.7.x.y (assuming you're using one of the 8.1.7 Oracle ODBC drivers).
Since Oracle desupported the 8.1.7 database almost a year ago, do you have the option of upgrading the Oracle client to a supported release (probably 9.2 in your case)?
Unfortunately, I don't know what your particular problem is, but I have certainly seen problems mixing the latest and greatest versions of applications with older versions of the Oracle client.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC -
Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013
Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013
Newform.aspx of list:-
Custom List is not saving data sometimes in the new form after 15 minutes and only blank entry record got created without saving data, even though some columns are mandatory fields?Hello dcakumar,
Sounds like a strang issue. If you can reproduce this can you see some errors in the ULS logs?
- Dennis | Netherlands | Blog |
Twitter -
Migrating from Office 2000 to office 2003
I know that the personality migration is great for upgrading OS versions. Does it work the same for application upgrades as well. We are going to be upgrading workstations from Windows 2000 and Office 2000 to Windows XP and Office 2003. Will the personality migration migrate the office settings from office 2000 to Office 2003?
THanks in advance.
BrianBrian,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Not able to sort any grid after Tools upgrade from 8.49.10 to 8.50.07
Not able to sort any grid after Tools upgrade from 8.49.10 to 8.50.07, also when I click on any prompt button the prompt values are displaying in a separate screen rather than displaying in a model window.
I have resolved it by applying stylesheets and clearing the cache.
Thanks,
Jayaprakash Tedla -
Running Lightroom 6 on Windows machine (after having upgraded from LR5... While attempting to add or change music in the Slideshow module, LR unexpectedly quits. After several attempts at this, LR6 won't even launch properly...shows the splash screen but that's it. The program is buggy...need an update/revision quickly!!
If you're on Windows, check out a free program called Audacity--it's fantastic. With Audacity the process of converting a 48.000 kHz to 44.100 kHz is as simply as opening, changing the sample rate, and then exporting again, as an MP3.
-
Upgrading from Office 2010 to 365
Upgrading from Office 2010 Pro to 365 Pro Plus - I know you must uninstall 2010 and install 365 or can run them concurrently. Question is - if you uninstall 2010 and install 365, what settings are lost and what settings are retained? Outlook signatures? Word
and Excel settings and preferences?
Also must the OST files be re-downloaded again? I hear there's a 40% compression improvement so this might be ideal, just want to know if the GPO to not re-download the OSTs actually works in this scenario?Hi,
Uninstall Office 2010 will not remove any user settings, the user settings will migrate upon the first use of each Office 2013 application.
By default, when Outlook 2013 is installed, a new compressed version of the Outlook data file (.ost) is created. This new compressed version of the .ost is up to 40% smaller than the size of the .ost files that were created in earlier versions of Outlook.
So it is recommended to use the new .ost file.
The "Do not create new OST file on upgrade" policy also works for Outlook 2013, however you might need to download the new Outlook Group Policy template (Outlk15.admx). Outlook 2010 template should not work in this scenario.
Regards,
A.B. -
After MAR upgrade from 4.0 - 7.0 login to ars_db fails
Hi,
After MAR upgrade from 4.0 -> 7.0 login to ars_db fails with the message "inconsistent database structure". For me it is a bit weired to do the ars_db upgrade to 7.0 SP4 and then start the transport agent which is still in the 4.0 level but this is the way it is described in the upgrade guide in order to delete Blobs after MAR upgrade.
Is the guide here inconsistent? Don't we have to upgrade the tools and services first before deleting Blobs?
Did anyone experience similar issues?
Regards
WhityHello Whity
After upgrading the MAR,To upgrade the MRS Tools and Services follow the steps below:
1. Stop and uninstall the 4.0 Transport Agent Service. Use the Transport Installer to
uninstall the above services.
2. If you are not able to uninstall the TA, uninstall the service manually using the following command sc delete [service name]
.Also check that there are no entry for that service at the registry location HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services.
3. On your local copy of the Upgrade DVD open the folder Mobile_Client_Upgrade\UpgradePurposeOnly . If you upgrade from CRM 4.0 you have to run SETUP.exe. If you upgrade from a higher release you have to run UPGRADE.exe
4. Install the Transport Service again after MRS tools and services are upgraded to 7.0 SP 04.
In your case, TA was not uninstalled pripr to the MRS tools and servcies upgrade.Hence you still see 4.0 TA. Please follow the above steps to solve the issue.
Please refer to the section 5.2.7 section of the upgrade guide document for more information.
Regards
shankar -
Iweb doesn't see my old domains under 10.9 after the upgrade from 10.7 Please help
Hi everybody,
iweb doesn't see my old domains under 10.9 after the upgrade from 10.7 Please help
It gives me an option to choose a domain but when I go to "sites" it doesn't recognize none of them.
Thanks :-)In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
To open your domain file in Lion, Mountain Lion or Mavericks or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT -
After I upgrade from tiger to snow leopard, my macbook pro more often freezes. Any solution? Do I need to increase memory? If so, how?
After I upgrade from tiger to snow leopard, my macbook pro more often freezes. Any solution? Do I need to increase memory? If so, how?
-
Error after SPS upgrade from SP10 to SP12
Hi Friends,
Recently we have done SOLMAN 7.1 sp upgrade from sp10 to sp12.
Now I want to perform configuration activities in SOLMAN_SETUP.
But when I am trying to do SYSTEM PREPARATION, I am facing error in first step(Maintain Users).
"Error: Number of elements in the collection of node COMPONENT CONTROLLER.1.NAMESPACES violates the carnality".
Kindly suggest me how to clear this above error and proceed further. Further please let me know as a SOLUTION MANAGER consultant what are the steps I need to perform post SP upgrade. I am not BASIS guy. So please let me know what are the activities which need to be performed by BASIS guy and SOLMAN guy
Please find the attached screen shot for the error screen.
Thanks & Regards,
Solman StarterGo the transaction STMS, if a window appears when you start the transaction that's mean it is not configured.
Only in this case :
1. Logon on to client 000 with DDIC.
2. Execute transaction SE06
3. Select the Database Copy or migration option
4. Press the Post-installation Processing button.
5. When prompted Do you want to re-install the CTS? Press the Yes button
6. When prompted for the Source System of Database Copy?, make sure that the <SID> of the production system is selected. Press the checkmark button to continue.
7. When prompted Change originals from PRD to QUA?, press the Yes button
8. When prompted Delete TMS Configuration?, press the Yes button
9. When prompted Delete old TMS configuration?, press the Yes button
10. When prompted Delete Old Versions of transport routes?, press the No button
Concerning the initial problem, i found this note :
http://service.sap.com/sap/support/notes/2025884 -
In our test environment, we are on 2005 SP01 PL34, and are
upgrading SQL Enterprise Edition from the 2000 to the 2005 SP2 edition.
The SQL upgrade advisor has given some error messages
in relation to SAP tables, as per below. Should we be concerned about
these, or will they have any effect on upgrading from SAP B1 2005 to
2007 versions?
Remove references to undocumented system tables
Many system tables that were undocumented in prior releases have changed or no longer exist; therefore, using these tables may cause errors after upgrading to SQL server 2005.
Affected tables
Object Name : TmSP_GetDbSizeByDrives
Object Type : P
System Table : spt_value
Object Name : TmSP_CheckDiskSpace
The above messages point to SAP stored procedures.I believe all those SP are temporary SP for you previous upgrade. Therefore. it should be no problem to upgrade your test database first. You have to back up the pre upgrade database anyway, you should be safe.
Thanks,
Gordon
Maybe you are looking for
-
My husband is getting all of my childrens messages on his phone. How can I change that or does he need his own apple ID? If so do we need to rest his phone to register it under him?
-
New iPod Touch: Would it come with OS 3.0?
It's weird that I can't find the answer to this anywhere on the support area of the site, but oh well: I see that the 3.0 OS is something current iPod touch users have to pay for, but if one were to buy one today, would it come with the new OS? Havin
-
I imported my word .doc file into robohelp to start the project. When I went to the HTML files to start the changes, I found that the converter had given me a perfect copy of my word formatting including putting margins in inches and "no page break i
-
Just tried to install iDVD 7 three times. No prior installation of IDVD 6. iDVD 7 Appeared to install successfully, but won't launch either by clicking on the icon or clicking on open in a window. Other iLife programs will launch. What gives?
-
Is there a OracleDataReader hasNext() method?
Hi all! How can I see if I have a register to read without moving the cursor? OracleDataReader o = ...; Instead of doing "o.Read()" do something like "o.hasNext()"? Is there a way to do this? Best Regards,