Error 1003 when running .exe

I am having a problem with error 1003 when I run a built application. I have searched the forums and found many others with this problem, but they encounter the problem while building the application, not while running the built .exe.
I have a top level VI (AutoRun.vi) that calls 3 VIs in sequence. All three are called in the same manner. The first two work fine, but I get this error with the third sub vi. This is how I call the subvi:
Use App.kind, check for "Run Time System" (strip app path twice), or "Development System" (strip app path once)
Build path to combine stripped path and file name of subvi to open
open vi reference
Invokee Node - Open FP
         Activated - T
         State - Standard
Invoke Node - Run VI
         Wait until done - T
          Dispose ReF - F
Invoke Node - Close FP
Close VI Reference
The error I get is:
Error 1003 occurred at Invoke Node in AutoRun.vi
Possible reasons:
LabView: the VI is not executable
I do not get this error while running in the development environment. Only when I run it as a .exe. Also I have had no problems with this code in the past. I just made a small change and now I have this problem. I have gone back to the old code and have the problem with it too.
I build the app by starting the app builder, selecting the top level VI, adding dynamic VIs and select all 3 subvis. The front panel of the second VI is not visible while running.  I have to go in and manualy change the "Remove Panel" in the build settings for this VI from the default yes to no. If I do not do this I get an error while trying to run the built application. I have no idea why this happens either, but making this change fixes the problem. After this I select build.
BTW, I have LabView 7.0

Hello,
Not sure what happened on your end, but if the problem comes back repost and we'll explore it!
Best Regards,
JLS
Best,
JLS
Sixclear

Similar Messages

Error 1003 when building exe

Hi all,
I saw a couple of thread of other people here having the same "1003 error" when trying to build an exe with LV 7.1.1
The exact text error is :
Error
1003 occurred at Open VI Reference in Dist Copy Non-VI
Files.vi->Dist Build LLB Image.vi->Dist Build App
Image.vi->Build Application.viPossible reason(s):LabVIEW: The VI is not executable.
This is all the more surprising because this error will only happen on my computer !!!
I borrowed a collegue's computer and the build went OK...
After further investigations I noticed only one difference between my collegue's computer and mine : mine has VIPM installed.
Could VIPM possibly be the source of this issue ??
PS : recompling the code (ctrl+shift+run) on my CPU didn't make any change.
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"

Hi TiTou,
You've probably solved this by now, but if not...
A few months ago I was trying to distribute two EXEs - both of which made dynamic calls - and this error (among others) was giving me "fits". I think it can happen if the caller has loaded a VI (.ctl or .vi) that also appears in the callee hierarchy - and the version loaded by the caller is incompatable with the callee's diagram(s.) When the callee runs, it has to use same-named VIs already in memory. If you see different behaviour on two different machines, are there two different versions of the caller?
No matter what the problem really is (was,) the attached VI will try to open all the broken VIs in a hierarchy - which can be a huge help in narrowing the problem. Oh yeah, with the (broken) FP open, click on the broken-arrow to see an error-list that can (but-usually-doesn't) display helpful diagnostic info! Compile this into your EXE (caller) so it runs if there's a problem running the callee.
Cheers.
Message Edited by tbd on 01-15-2007 10:58 PM
Message Edited by tbd on 01-15-2007 11:00 PM
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)
Attachments:
Util.VI.OpenBroken.vi ‏62 KB

Error 1003 when loading a VI dynamically on LabView Run-time ini file configuration

hi all,
I have a problem with my runtime excutable.
On 4 systems, all running XP it runs fine.
On 2 systems ( one a new install of just LVRT 2011 SP1 ) I have:
Error 1003 when loading a VI dynamically on LabView Real-time
Or more spoecifically the error code is 1003 and the error source is Open VI Reference.
When the RT app runs correctly I get these paths:
Path Sent to Open Vi Reference: Yeast_Grower.exe\Tecan_talk_Control.vi,
Path Returned from Open Vi Refence: C:\Program Files\Yeast_Grower\Yeast_Grower.exe\Tecan_talk_Control.vi,
On a system that does gets the 1003 Open Vi Refence error I have the same Path Sent but of course no path returned as it does not open.
To be sure that the vi Dyanmically called vi is compiled and valid at runtime I also include a copy of in the main.vi.
To be extra sure I have also installed the runtime versions of VISA and DAQmx.
I have compiled it with and without the "Use LV 8 calling hiaracy"
My conclusion as this stage is that either the installation of LVRT 2011SP1 misses something the earlier LVRT installtions make.
or is there a MyApp.ini or LVRT .ini that controls how the RT dyanim calls are handled.
Help very welcome how to solve this puzzle.
thanks
michael

I understand that all the PCs (6 of them) have LV 2011 SP1, runtime or the development system installed. Right?
How many of these PCs have the source code available on them?
-> Only one of them has the source code.
I am not sure I understood 'I also include a copy of in the main.vi'. Does it mean you placed the subvi in the main.vi?
-> I meant I have included in main.vi the actual vi that is called dynamically - but only where it is not called.
Did you try including the sub vi which is called dynamically, as 'Always included' in the EXE build?
-> No, I did not know of this option - but the above I did this by default.
Edit: Did you verify the software versions of LV RT, VISA etc on all the PCs? Are they same?
-> I did verify even added DAQmx just in case
There is lots of material available on this forum for error 1003 and dynamic vi calling. Did you find anything useful to try among the forums threads?
-> I did view many of them.
I did finally find the answer.
I have a subvi (callNet.vi ) in the dynamically called vi (dynamic ) that calls .Net libraries.
Now the thing is that this subvi callNet.vi is coded out by enclosing it in a Disable structure.
In fact this subvi ( callNet.vi) does not even compile - ie it has a broken arrow
however if enclosed in a Disabled structure and disabled, the enclosing vi compiles OK.
However I have discovered that even with the .Net calling subvi (callNet.vi) in the Disabled state of the Disabled structure
the enclosing vi (dynamic.vi ) does NOT run - although it compiles just fine.
Once I installed the .Net libraries (I actually did include them with my app installer ) with the vender's supplied installer
then my app now successfully calls the dynamic vi.
So the Summary and warning is: Even if the dynamic called vi is included in Main.vi and Main.exe runs ( but does not call the dynamic vi - except when called dynamically at later some point ) and even if, in this case, the .Net calling subvi is disabled out ie no .Net calls are made the dynamically called vi will not run when called dynamically.
I hope that is not too confusing. In summary it seems the Disable structure does not entirely disable.
Michael

Runtime Error -GETWA_NOT_ASSIGNED when running COI

Hi ALL,
We are getting run time error - GETWA_NOT_ASSIGNED when running COI tasks.
Error analysis
     You attempted to access an unassigned field symbol
     (data segment 32995).
     This error may occur for any of the following reasons:
     - You address a typed field symbol before it is set using ASSIGN
     - You address a field symbol that points to a line in an internal table
       that has been deleted
     - You address a field symbol that had previously been reset using
       UNASSIGN, or that pointed to a local field that no longer exists
    - You address a global function interface parameter, even
      though the relevant function module is not active,
      that is it is not in the list of active calls. You can get the list
      of active calls from the this short dump.
How to correct the error
    You may able to find an interim solution to the problem
    in the SAP note system. If you have access to the note system yourself,
    use the following search criteria:
    "GETWA_NOT_ASSIGNED" C
    "CL_UC_COI_ACT_PT==============CP" or "CL_UC_COI_ACT_PT==============CM00P"
    "REDUCE_GOODWILL_ENTRIES"
    If you cannot solve the problem yourself and you wish to send
    an error message to SAP, include the following documents:
    1. A printout of the problem description (short dump)
       To obtain this, select in the current display "System->List->
       Save->Local File (unconverted)".
2. A suitable printout of the system log
    To obtain this, call the system log through transaction SM21.
    Limit the time interval to 10 minutes before and 5 minutes
    after the short dump. In the display, then select the function
    "System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
    supply the source code.
    To do this, select the Editor function "Further Utilities->
    Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
    or which actions and input led to the error.
Information on where terminated
    The termination occurred in the ABAP program "CL_UC_COI_ACT_PT==============CP"
     in "REDUCE_GOODWILL_ENTRIES".
    The main program was "UCUWB000 ".
    The termination occurred in line 722 of the source code of the (Include)
     program "CL_UC_COI_ACT_PT==============CM00P"
    of the source code of program "CL_UC_COI_ACT_PT==============CM00P" (when
     calling the editor 7220).
702   call method do_inv_net_change->create_data_reference
703     exporting
704       i_type   = cl_uc_coi_inv_net=>gc_ref_pt_block
705       io_model = do_model
706     importing
707       er_data = lr_t_data.
708   assign lr_t_data->* to <lt_share_block>.
709   call method do_inv_net_change->get_block
710     importing
711       et_pt_shares = <lt_share_block>.
712
713   create data lr_s_data like line of <lt_share_block>.
714   assign lr_s_data->* to <ls_share_block>.
715 * change due to selling invor's transaction
716   read table <lt_share_block> into <ls_share_block> index 1.
717
718 * direct shares prior to divestiture
719   assign component 'R_TH_DSH_OLD'
720     of structure <ls_share_block> to <lr_th_dsh_old>.
721   assign <lr_th_dsh_old>->* to <lt_dsh_old>.
>>>>   create data lr_s_data like line of <lt_dsh_old>.
723   assign lr_s_data->* to <ls_dsh_old>.
724   assign component ucf6_cs_coi_fld-pcnt1
725     of structure <ls_dsh_old> to <pcnt1_7a>.
726
727 * change of direct shares in divestiture
Please provide your suggestions.
Edited by: VM2727 on Feb 10, 2012 3:27 AM

Or even these ones:
SAP Note 1480856 - C/I: Program termination GETWA_NOT_ASSIGNED
Symptom
When you execute the consolidation of investments, a program termination
occurs (short dump GETWA_NOT_ASSIGNED in the method CREATE_OCI_LIST of the
class CL_UC_COI_ACT).
Note 1467924 - Termination GETWA_NOT_ASSIGNED in CL_UC_COI_ACT_PD
Symptom
When you execute the consolidation of investments, the program termination GETWA_NOT_ASSIGNED occurs in the method CALC_NET_INCOME_MEM of the class CL_UC_COI_ACT_PD.

Error Message when running BI Publisher

Hi-
Getting the following error message when running a custom report, report has been defined but still getting the error message in HCM 9.2 with PeopleTools 8.53
Template definition MAC_CONF_STM not found in the report definition. (235,2012) PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:GetTemplate PCPC:15048 Statement:325
Called from:PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:GetTemplateRuntime Statement:1778
Called from:PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:ProcessReport Statement:1115
Called from:BA_VALIDATION.ConfirmStmtPrint.OnExecute Name:PrintConfirmStmt Statement:53
Called from:W3EB_ENR_SUMMARY.GBL.W3EB_ENR_PB_WRK.ODEM_CONF_STMT_PB.FieldChange Statement:2
Any idea regarding the error message
Regards,
MACD

Did your custom report ever ran successfully in the environment you are getting the error.
Most of the time not all the report definition and associated definitions are migrated to the next environment.
Have a look at following doc:
E-BI/XMLP: How To Migrate BI/XML Publisher File Definition Objects? (Doc ID 659919.1)

A critical program error occured when running a workbook

Some end users get a critical program error occured when running a workbook when they want to make selections.
In the trace they get the following message
System.ArgumentException: Item has already been added. Key in dictionary: "44ABATDK7TYM365CYLQ0VDKU6" Key being added: "44ABATDK7TYM365CYLQ0VDKU6"
This happens only on some PC clients !
Thanks for any help !
Ivan

Hi Vid,
Thanks for your suggestion.
I am using a different patch i.e.
BI AddOn 7.X (based on 7.10), Support Package 5, Revision 1083
and it helps to solve my problem.
Cheers.

Error message when running the FSPCCURR - PS/Fin MultiCurrency Process

error message when running the FSPCCURR - PS/Fin MultiCurrency Process
=====================================================
2011-03-21-17.21.39.660000 INFO(5870,1) PI(785156) Program(FSPCGLMC) GL MultiCurrency processing has begun.
2011-03-21-17.21.40.820000 INFO(5870,4) PI(785156) Program(FSPCSTEP) Beginning processing, Step CURPER in Group NONREVAL for Business Unit NAMER.
2011-03-21-17.30.14.520000 INFO(5870,4) PI(785156) Program(FSPCSTEP) Beginning processing, Step USD_USD in Group NONREVAL for Business Unit NAMER.
2011-03-21-17.30.53.000000 SEVERE ERROR IN PGM:(5870,58) PI(785156) Program(FSPCPROC) Edit journal fails for Business Unit NAMER and Step USD_USD.

Hi 841037,
We are facing this same issue in our environment. We are on FSCM 9.1 bundle #24.Please let me know how you resolved this issue at your end. Any help or pointers regarding this issue is highly appreciated. Thanks.

Error message when running form

hi everybody,
im getting this error message when running a simple form.
Positional Parameter after key command line.
Can anyone please help.
thnk u

Check the path to your form. Forms does not like spaces in the path or fmx filename, but the error doesn't explain the problem at all!

I get an error message when running a back-up from my Macbook Pro: The backup disk image Macbook.sparsebundle could not be accessed (error-1) and the backup did not complete? What is the issue?

I get an error message when running a back-up from my Macbook Pro: The backup disk image Macbook.sparsebundle could not be accessed (error-1) and the backup did not complete? What is the issue?

Try Here > http://pondini.org/TM/C12.html
More Info here > http://pondini.org/TM/Time_Capsule.html

Receiving Error Message when running sh rep_populate.sh

Following directions at http://www.oracle.com/technology/tech/linux/htdocs/yum-repository-setup.html
Receiving Error Message when running sh rep_populate.sh trying to create local yum repositories and configure up2date and yum to install and update packages from them.
THIS PROGRAM IS DEPRECATED!
You should be generating xml metadata instead.
Please see http://linux.duke.edu/metadata
After executing following instructions and replacing server name with our server name.smmj.com
Client Setup
1. Import the GPG key
rpm --import /usr/share/rhn/RPM-GPG-KEY
2. Configure up2date to use the yum repository. Edit /etc/sysconfig/rhn/sources. Comment out line
up2date default
to
#up2date default
and add the following lines. Replace <repository_server> with the hostname of the machine that is hosting the yum repository. Comment and uncomment individual repositories as needed.
Enterprise Linux 5
(commented uncommented)yum el5_$ARCH_latest http://<repository_server>/yum/EnterpriseLinux/EL5/latest/$ARCH/
(commented uncommented)yum el5_$ARCH_addons http://<repository_server>/yum/EnterpriseLinux/EL5/addons/$ARCH/
#yum el5_$ARCH_oracle http://<repository_server>/yum/EnterpriseLinux/EL5/oracle/$ARCH/
#yum el5_ga_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/ga/base/$ARCH/
#yum el5_u1_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/1/base/$ARCH/
#yum el5_u2_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/2/base/$ARCH/
#yum el5_u3_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/3/base/$ARCH/
#yum el5_ga_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/ga/patch/$ARCH/
#yum el5_u1_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/1/patch/$ARCH/
#yum el5_u2_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/2/patch/$ARCH/
#yum el5_u3_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/3/patch/$ARCH/
and running additional instructions
2. Run up2date to install python-urlgrabber.
up2date -i python-urlgrabber
Receiving following error
There was some sort of I/O error: <urlopen error (-2, 'Name or service not known')>
Further when trying to replace /etc/yum.repos.d/ULN-Base.repo ULN-Base.repo unable to find file, file that is there
is called public-yum-el5.repo
Made following changes in that file
Enterprise Linux 5
[el5_latest]
name=Enterprise Linux $releasever - $basearch - latest
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/latest/$basearch/
gpgcheck=1
enabled=1
[el5_addons]
name=Enterprise Linux $releasever - $basearch - addons
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/addons/$basearch/
gpgcheck=1
enabled=0
[el5_oracle]
name=Enterprise Linux $releasever - $basearch - oracle
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/oracle/$basearch/
gpgcheck=1
enabled=0
[el5_ga_base]
name=Enterprise Linux $releasever GA - $basearch - base
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/ga/base/$basearch/
gpgcheck=1
enabled=0
[el5_u1_base]
name=Enterprise Linux $releasever U1 - $basearch - base
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/1/base/$basearch/
gpgcheck=1
enabled=0
[el5_u2_base]
name=Enterprise Linux $releasever U2 - $basearch - base
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/2/base/$basearch/
gpgcheck=1
enabled=0
[el5_u3_base]
name=Enterprise Linux $releasever U3 - $basearch - base
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/3/base/$basearch/
gpgcheck=1
enabled=0
[el5_ga_patch]
name=Enterprise Linux $releasever GA - $basearch - patch
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/ga/patch/$basearch/
gpgcheck=1
enabled=0
[el5_u1_patch]
name=Enterprise Linux $releasever U1 - $basearch - patch
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/1/patch/$basearch/
gpgcheck=1
enabled=0
[el5_u2_patch]
name=Enterprise Linux $releasever U2 - $basearch - patch
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/2/patch/$basearch/
gpgcheck=1
enabled=0
[el5_u3_patch]
name=Enterprise Linux $releasever U3 - $basearch - patch
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/3/patch/$basearch/
gpgcheck=1
enabled=0
Then ran following commands
up2date -u
Output
There was some sort of I/O error: <urlopen error (-2, 'Name or service not known')>
yum update
http://<ice.smmj.com>/yum/EnterpriseLinux/EL5/addons/x86_64/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (-2, 'Name or service not known')>
Trying other mirror.
http://<ice.smmj.com>/yum/EnterpriseLinux/EL5/latest/x86_64/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (-2, 'Name or service not known')>
Trying other mirror.
Error: Cannot retrieve repository metadata (repomd.xml) for repository: el5_latest. Please verify its path and try again
We would like a simple and correct way of doing this or we will be forced to switch to another os and another provider
Thanks, for your help

We purchased Licensed version of Red Hat Linux Oracle for our network server. My boss wanted a simple way of installing Samba on it so that the server can be used for file and printer sharing. We have an active directory on our network and couple of other Windows servers as well as other Red Hat servers. He wants to install Samba on that licensed version so that it can primarily be used for file storage and sharing, he wants to be able to connect with gui type interface to this server from windows machines and linux machines and he wants for this Red Hat Linux Oracle machine to show up in active directory.
Aparently when we went to Applications, Add Remove Software in Red Hat Fedora Samba was not in there.
When we go to System, Administration, Server Settings, Services, Samba is also not there.
Nowhere can we find an easy way of installing samba on this Linux OS.
I went to your site, signed in, (previously there was only 1 channel available there, I have just recently found and added all the channels that were aplicable to our system) and downloading them now to another version of the same type of Licensed Red Hat Linux Oracle. Hopefully when I use Software Updater in System Tools it will load the packages we are loking for (from the channels I selected on your website). Once that is done I think I could just go to add remove software and install the packages that I need from there.
I am still not sure why I set out to install repositories on this version of Linux, perhaps I mistakenly thought that once everything is installed (according to directions at http://www.oracle.com/technology/tech/linux/htdocs/yum-repository-setup.html) on the machine in question I would be able to use that same machine to get the packages for that same machine. We were in such a rush and desperate to put the server on to the network it did not dawn on me that this scenario is designed to have one serve on the network that holds repositories and other machines connect to it for packages.
I think I am on the right track in my logic, log in to your site with the CSI number, user name and password, select ALL the channels versus only one, save the search, then from the machine update packages, then add new software and Samba Should be in there. I would like to hear your thoughts on this.
This version of Linux seem like a very reliable version of OS and I would hate to give up on it, especially since we already bought licenses for it, its just that we don't have that much experience with it and I would upreciate all the info that you can give us for it. I am sure that everyone at SMMJ will upreciate you for it.

Error message when running Transaction Code = ME84

hi,
i am getting an error message when running Transaction Code = ME84
Error is 'No processing (error message P5 017), No data for chosen selection'
can someone please guide me on this ?

Hi Mahendra,
There are several reasons for the release not happeneing.
1. The issue could be in the selection of release type
2. Scope of selection
3. Strategy profile
Please check whether the selection parameters are considered are right for release to happen.
Regards,
Harish

LC 2 Error 1003 when executing external command brconnect on (xpgid=0,con

Dear all,
I am getting error in sm21.Please suggest .
Details Page 2 Line 23 System Log: Local Analysis of clusa                    1
Time     Type Nr Clt User TCode Grp N Text
10:00:32 DIA 000 600 DDIC       LC 2 Error 1003 when executing external command brconnect on (xpgid=0,convid=.)
Error 1003 when executing external command brconnect on (xpgid=0,convid=.)
Details
Recording at local and central time........................ 10.05.2010 10:00:32
Task...... Process                     User...... Terminal Session TCode Program Cl Problem cl      Package
06952      Dialog work process No. 000 DDIC                      1       SAPMSSY1 S Operation Trace SBTC
No documentation for syslog message LC 2 exists
Parameter
1 .... xpgid=0,convid=.
Technical details
File Offset RecFm System log Grp N variable message data
224 260640                  LC 2 brconnect & &Error 1003 & & &
Regards,
Kumar

Dear Juan,
Please find the logs.Please suggest.
dev_cp log
Trace file of control program (trace level 3)
< Function: BtcTrcInit> Function: main SAPXPG 720
2010-05-10--09-33-29 : Before BtcXpgDetach
> Function: BtcXpgDetach < Function: BtcXpgDetach Accept RFC connection from R/3 system
2010-05-10--09-33-29 : Before RfcAccept
2010-05-10--09-33-29 : RfcAccept returned OK
Begin of check_if_security_list
security check switched OFF
End of check_if_security_list
Begin of check_trace_option
End of check_trace_option
Install RFC call SAPXPG_START_XPG
Install RFC call SAPXPG_START_XPG_LONG
Install RFC call SAPXPG_END_XPG
Wait for RFC call SAPXPG_START_XPG or SAPXPG_START_XPG_LONG
2010-05-10--09-33-29 : Before first call of RFCDispatch
Security: rfcexec_logon_check
rfcexec_logon_check: logon_user =
sapxpg_logon_check: rfc_attr.user = BASIS
rfcexec_logon_check: client =
> Function: BtcXpgStartXpgLong
2010-05-10--09-33-29 : Beginning of BtcXpgStartXpgLong
    > Function: BtcXpgStartXpgImportLong      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgTable      < Function: BtcXpgTable    < Function: BtcXpgStartXpgImportLong
BtcXpgStartXpgLong: special_trace_flag = <6>
    > Function: BtcXpgStartXpgInt      > Function: BtcXpgItTransfer        Content of source log table:
          Line Text
          <No StdOut/StdErr output reported>
        Target log table is not identical to source
        ItGetLine terminated with NULL
      < Function: BtcXpgItTransfer      > Function: BtcTrcReset      < Function: BtcTrcReset      Call mode: VIA RFC
      Input arguments of BtcXpgStartXpg:
        External program: brtools
      tracecntl = : 6
      Display of Parameter string switched off !!
        Contents of control flags:
          StdIn control flag: redirect StdIn
          StdOut control flag: store StdOut output in memory
          StdErr control flag: store StdErr output in memory
          Trace control flag: unknown contents
          Termination control flag: control program will wait for termination
      > Function: BtcXpgCheck        > Function: BtcXpgArgv
          parameter number 1:
          parameter number 2:
          parameter number 3:
          parameter number 4:
          parameter number 5:
          parameter number 6:
          parameter number 7:
          Total number of arguments scanned: 7
          Argument argv[0]: brtools
        < Function: BtcXpgArgv      < Function: BtcXpgCheck      > Function: BtcXpgSigInst      < Function: BtcXpgSigInst      > Function: BtcXpgStart        Rearrange stderr to be collected in memory
        Rearrange stdout to be collected in memory
        Redirect stdin, read from NUL:
        > Function: BtcTrcInit< Function: BtcXpgStartStart status of external program: external program successfully started
Id of external process: 0000005296
StdOut/StdErr collected in memory
Line Text
<No StdOut/StdErr output reported>
< Function: BtcXpgStartXpgInt> Function: BtcXpgStartXpgExport > Function: BtcXpgParam < Function: BtcXpgParam > Function: BtcXpgParam < Function: BtcXpgParam > Function: BtcXpgParam < Function: BtcXpgParam< Function: BtcXpgStartXpgExport
2010-05-10--09-33-29 : End of BtcXpgStartXpgLong
< Function: BtcXpgStartXpgLong
2010-05-10--09-33-29 : After first call of RFCDispatch
Wait for RFC call SAPXPG_END_XPG
2010-05-10--09-33-29 : Before second call of RFCDispatch
Security: rfcexec_logon_check
rfcexec_logon_check: logon_user =
sapxpg_logon_check: rfc_attr.user = BASIS
rfcexec_logon_check: client =
> Function: BtcXpgEndXpg
2010-05-10--09-33-29 : Beginning of BtcXpgEndXpg
> Function: BtcXpgStartXpgExport    > Function: BtcXpgTable    < Function: BtcXpgTable < Function: BtcXpgEndXpgImport > Function: BtcXpgEndXpgInt    > Function: BtcXpgItTransfer      Content of source log table:
        Line Text
        <No StdOut/StdErr output reported>
      Target log table is not identical to source
      ItGetLine terminated with NULL
    < Function: BtcXpgItTransfer    > Function: BtcXpgReadChild      Output of external command not written to log !!
      Process executing external program has terminated
    < Function: BtcXpgReadChild    > Function: BtcXpgEnd    < Function: BtcXpgEnd    Termination status of external program: no errors reported
    StdOut/StdErr collected in memory
< Function: BtcXpgEndXpgInt > Function: BtcXpgEndXpgExport    > Function: BtcXpgParam    < Function: BtcXpgParam    > Function: BtcXpgParam    < Function: BtcXpgParam < Function: BtcXpgEndXpgExport
2010-05-10--09-33-30 : End of BtcXpgEndXpg
< Function: BtcXpgEndXpg
2010-05-10--09-33-30 : After second call of RFCDispatch
2010-05-10--09-33-30 : After call of RfcClose (wait)
< Function: main
2010-05-10--09-33-30 : End of SAPXPG: main
dev_xpg
Trace file of External Program (trace level 3)
< Function: BtcTrcInit> Function: BtcXpgStart External program: brtools -sid prd -F printout alert_log 20100401000000 0128
Regards,
Kumar

Following error occurring when running application in wireless tool kit

Hi
Following error occurring when running application in wireless tool kit
java/lang/ClassFormatError: Bad version information.
can any suggest y ?

Hi,
I am also facing the same problem......................
java/lang/ClassFormatError: Bad version information
The error occurs when I try to simulate the mobile device using wireless tool kit. Does it have anything to do with the antivirus/firewall running on my system?
Did Ram get a solution to his problem? Can anybody please help?
Many Thanks
Merin
HI
Sorry i could not find any related information there
the version of wireless toolkit i am using is 2.1
well in release notes its given that it also
supports cldc1.0 and midp1.0
presently i am using cldc1.0.4 and midp1.0.3
versions
is there any version compatability error
please suggest me its quite urgent

Report generation toolkit VI error when running EXE

A VI inside the Report Generation Toolkit (version 1.1.2), Excel Find Application Directory.vi, will not function correctly when running an EXE. The "Current VI's path" block will return the path of the currently running EXE rather than the path of the Excel Find Application Directory VI. (The same would be true for Word Find Application Directory.vi.)
-Joel
Solved!
Go to Solution.

Have you had a look at this knowledgebase article? The error is caused due to the exclusion of any dynamic VI.
Ipshita C.
National Instruments
Applications Engineer

Cs6 pro prem install from dload exe and 7z on usb both in same folder. when run exe it gives error archive file needed

new install cs6 production premium .downloaded exe to a usb thet the vendor provided with the 7z file cos i dont have lots of data. .With both in the same folder on the usb running exe rsults in error message asking for an archive file. There are only 2 files in the download . what does it want?

same error message from desktop looking for archive file
files
ProductionPremium CS6.7z 6,109,190 KB
ProductionPremium_CS6_LS7 1,020 KB
running win 8.1 on ssd and z97 mobo 4790 cpu gtx780

Error 1003 when running .exe

Similar Messages

Maybe you are looking for