Error 1005

I'm trying to use my recovery disc's and partition to reload my Vista laptop however I keep getting an error 1005 on it.
My laptop is a Presario CQ61-220SA
Anyone got any ideas?

Do I need to replace the hdd?
MikeHpTechMan wrote:
Before using the Recovery Disc, make sure the hard drive is good. The Hard Disc Driver Test can performed either through [F2] Screen : Start up Diagnostics or through [F10] : Diagnostics <Tab>. The [F2] / [F10] should held while turning on the Computer to get to the respective windows. In most case, the reason for this error: 1005 is the Hard Driver failure.

Similar Messages

HP Pavilion DV6 - problem with HP recovery - error 1005

I'm trying to format the computer and reinstall windows.
The laptop does not have a hard disk partition for the recovery. I'm using the DVD's that where made when I got the computer.
I can open the HP recovery system and get about 36% in, before i get the message: "error 1005"
I have tried several options that i could find on google like: cleaning the disc's, setting the BIOS to default, checking the disc's are DVD+R.
Someone suggested that Wireless has to be turned on when using the recovery. Mine is turned off. I can't turn on the computer and switch it on, and the keyboard button (touch button) don't respond.
Any suggestion on how to turn Wireless on, or how to fix the recovery?

Hi,
There may be a work around if you have ( or can borrow ) a retail Windows 7 installation disc that is exactly the same version as your OEM installation - ie if your notebook came with Windows 7 Home Premium 64bit this is the exact retail version you would need.
If you have access to this, use the retail disc to perform the installation, enter the activation key found on the underside of your notebook when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this is fully supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional driver can be found starting Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

DTW, Unkonwn error 1005!65171

Dear all,
I have UDO which contain 2 UDT ( Master and Master Row )
I try to DTW the UDO , but always fail.
I generate the template by using Template->Customise Template->Select Object->User Defined Data->UDO-> My UDO Name
After that i fill my data and dtw.
After DTW the status Created failed Reason Unkonwn error 1005!65171
I also try to generate the udo by using Template->Generate Template UDO-> Choose my UDO Name
The result still same, status Created failed Reason Unkonwn error 1005!65171.
My data input has matched with table structure
My SAP Version 8.8 PL 15, Database USA Localization
Does any one can help me to solve ?
Thanks

Hi,
I think is a bug.. i tried with every column and it doesn´t work..
This is my template
HEADER
Code     Name     U_CARDCODE     U_CARDNAME     U_ADDRESS
Code     Name     CARDCODE                             CardName                           Address
6          1200000001                            CIA MINERA RAURA S A     OFICINA PRINCIPAL
ROWS
Code     LineNum     U_DIA     U_MHORAINI                   U_MHORAFIN     U_THORAINI                             U_THORAFIN
Code     LineNum     day     Morning time since      Morning time until     Afternoon time since     Afternoon time until
6     1     Monday     800                            1000                  1400                                           1600
Regards.
Christian Carrasco

Error 1005 on OS install

Serial Number :
[removed for privacy]
Product Number :
FQ564AA
Description :
HP PAVILION A6720F DESKTOP PC
Windows Vista 32-bit Home Premium
Receiving error 1005, when attempting to install OS on new hard drive. Thinking motherboard may be bad.....

Hi,
If you're using your Recovery Discs to reinstall Vista this may just be a problem with the Recovery Process, I would suggest trying the following method to see if this will allow you to reinstall Vista.
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
In the same way that it's possible to create a Windows 7 retail disc, use this to perform the installation and then use the OEM windows 7 activation key from the COA label, the same process is possible if your PC came with Vista. A full description ( including links to the Vista Image downloads ) of this can be found on the following link.
http://en.community.dell.com/support-forums/software-os/w/microsoft_os/3317.2-3-microsoft-windows-vi...
Additional software and drivers you may require can be found Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Error 1005 (recovery )

Hi there
I have Hp dv5 1010ea one day I formatted the system with Win7 but it was infected witha a virus so I decided to recover it with the recovery DVD( purchased from hp) but it didn't work after finishing to 100% a message appeared and said error 1005? can you help plzz?

Error 1005 is often seen with a bad hard drive.The test in BIOS usually tells you if there is a problem with the hard drive. However, I have seen the test pass but still no successful recovery without replacing the drive. So to answer your question- it just might tell you right off the start that the drive is bad.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Pavillion TX 2510us tablet notebbook error #1005, while restoaring at 52% of the first dvd.

Hi everyone! I'm from chile and I have a pavillion TX2510us notebook tablet pc. I'm trying to restore my TX 2510us tablet notebook pc from just created dvd's but twuce I have received the same error #1005, while at 52% of the first dvd. Can anybody help? Thanks in advance!!!

I would suggest either ordering recovery discs from HP or attempt to recover from the F11 recovery manager.
I am an HP employee.
Please post rather than sending a Private Message. It's good for the community and I might not be able to get back quickly.- Thank you.
Please click the White Kudos star on the left to say thanks.
Please mark Accept As Solution if this resolves your issue.

DTW Unknown error 1005 filling @BNITMDV

Hi experts,
Trying to fill the commodity codes of the items intrastat settings with DTW, using UDO_BNITMDV, it is running in "Unknown error -1005".
If trying the same wiht UDT it fails indicating "created failed" with reason 65172.
Both of these errors are told to indicate a formatting problem. What may be wrong with the following data?
Code;Name;U_ITMCode;U_CommCode
Code;Name;U_ITMCode;U_CommCode
4;4;1086654;85365080
5;5;1086655;85365080
Regards,
Peter

Hi Peter,
I have still the same problem. Even I have renamed the ODO.
My template looks like:
Code;Name;U_ITMCode;U_CommCode;U_SupMasUn;U_Factor;U_OriStImp;U_OriStExp;U_NaTraImp;U_NaTraExp;U_StProImp;U_StProExp;U_OriCntry;U_SerCode;U_ItemType;U_SerSupMt;U_SerPayMt;U_UseWht
Code;Name;U_ITMCode;U_CommCode;U_SupMasUn;U_Factor;U_OriStImp;U_OriStExp;U_NaTraImp;U_NaTraExp;U_StProImp;U_StProExp;U_OriCntry;U_SerCode;U_ItemType;U_SerSupMt;U_SerPayMt;U_UseWht
00000000;;A00001;12345678;;;;;;;;;DE;;I;;;tYES
00000001;;A00002;12345678;;;;;;;;;;;I;;;
00000007;;A00003;12345678;;;;;;;;DE;;I;;;tYES
00000008;;A00004;12345678;;;;;;;;;;;I;;;Y
I always get Error -1005.
Kind Regards
Martina

AppCrash event ID 1000 and then Application Error 1005

Hi
We have 3rd party application that intermittently crashes on our Win 2012 Standard virtual machine. When it crashes I see this in the application eventvwr (I've changed the application name)
Problem signature:
Problem Event Name: APPCRASH
Application Name: 3rdpartyapp.exe
Application Version: 14.1.0.4
Application Timestamp: 52b044c8
Fault Module Name: 3rdpartyapp.exe
Fault Module Version: 14.1.0.4
Fault Module Timestamp: 52b044c8
Exception Code: c000001d
Exception Offset: 00fc62d5
OS Version: 6.2.9200.2.0.0.272.7
Locale ID: 2057
Additional Information 1: 731e
Additional Information 2: 731e76713b2417395b5ceea2ee626535
Additional Information 3: c9e3
Additional Information 4: c9e3d14f7e1227fb250a05129fba4592
Then at the same time in the eventvwr we see this entry for ID 1005
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program Sirrom because of this error.
Program: 3rdpartyapp
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional Data
Error value: 00000000
Disk type: 0
Can anyone shed any light on this? A few people online have had the same issue but our application is all instaleld locally to the machine and it's not making any requests/calls to any other servers etc.
any help is appreciated thanks

Does the vendor support this application on Windows Server 2012?
Just because it ran on an earlier version of Windows is no guarantee that the vendor has tested it and supports it on 2012.
. : | : . : | : . tim

SSL Server Error 1005 on my iPad

I can't get my IPad to play a radio station or news broadcast, it says there is an error connect to internet, yet I'm on the internet!?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
 Cheers, Tom

My iphone 3g stoped working during the updating by itunes, so nothing is appeared on the screen now. During the updating itunes gave me error 1005

y iphone 3g stoped working during the updating by itunes, so nothing is appeared on the screen now. During the updating itunes gave me error 1005

http://support.apple.com/kb/TS3694?viewlocale=en_US&locale=en_US
but I am not seeing a fix for this issue with the iPhone
You may need to trade it in for a new iPhone.. is what it may sound like

Error 1005 in Photos

I am having trouble moving photos out of the new Photos app. I tried dragging an dropping, I tried dragging to PS Elements and then I tried exporting to a file on my desktop. Each time I get this message. It seems I cannot export ... any suggestions? Many thanks!!

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Error when creating a new CrystalReport.rpt file.

I get the following error when attempting to add a new CrystalReport to my project:
Database Connection Error: ‘ADO Error Code: 0x80040e14
Source: Microsoft SQL Server Native Client 11.0
Description: Line 1: invalid procedure number (0). Must be between 1 and 32767.
SQL State: 42000
Native Error: 1005 [Database Vendor Code: 1005 ]’
This is happening as soon as I select the database:
It asks me to enter the database password, then crashed out with this error, without giving me the chance to even select any procedures.
There are procedures there, and the user account used to log in has access to them.
I'm using Visual Studio 2010.

Database Vendor Code: 1005 is being passed from the database client through the report engine - unmodified. E.g.; look for the error in your database documentation.
See:
Failed to retrieve data from the database. Details: [Database Vendor Code: &lt;vendor code number&gt;].
Failed to open the connection. Details: [Database Vendor Code: &lt;vendor code number&gt;].
Compare the version of the client you are using and "other people" are using.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Import budget by using DTW, error message "cannot find this object in B1 application defined, object defined error 65171

Dear Sirs, I try to import budget header and budget line by using DTW, however error message found, "Cannot find this object in B1 application defined, object defined error 65171. Regards, Saw Hua

Hi Javier,
Please check below links.
DTW Error 65171
DTW error 65171
DTW, Unkonwn error 1005!65171
DTW error 65171 - Cannot find this object
DTW error65171
SAP B1 Data Transfer WorkBench : Data too large... | SCN
Hope this help
Regards::::
Atul Chakraborty

DTW error while uploading UDO master

Dear All,
When am trying to upload a UDO master through DTW, it is giving me an Unknown error 1005! 65171.wat could be the reason for it.
Regards,
Shyam sundar.A

Dear Shyam,
All 65171 errors are related to data format mismatch. You need to try by only few columns first and add one column at a time to test.
Thanks,
Gordon

DTW Error 65171 "Cannot find this object in B1"

Hello experts
By trying to perform a massive modifying of Journal entries using DTW I am getting this error for all the lines of my source file. I am trying to modify cost center, so I am using the JDT1 template for the data load.
The thing is that by checking Step 5 "Map Object Fields", "Source Data" tab is displaying all the data as it is on the file, but on "Target Data" tab I can not find Journal entry number and LineNum, the rest f the data is ok, but those two fields are not being retrieved on "Target Data".
Thanks in advance and regards

Hi Javier,
Please check below links.
DTW Error 65171
DTW error 65171
DTW, Unkonwn error 1005!65171
DTW error 65171 - Cannot find this object
DTW error65171
SAP B1 Data Transfer WorkBench : Data too large... | SCN
Hope this help
Regards::::
Atul Chakraborty

Error 1005

Similar Messages

Maybe you are looking for