Error 1009 for end-user

Hello,
"It is unlikely that an end-user would ever experience Flash player error 1009" - but I do when trying to look some videos (youtube is no problem, but babelgum.com and videos on flickr don't work, for instance)  I used the uninstaller and reinstalled the player, but the problem persists (Mac Os 10.5.8, safari 4.0.3 / firefox 3.5.2)
maybe someone can help me?
thanks a lot

Lucas,
As far as I now, there is no possibility to differenciate users in a group.
This means that if you can't differenciate users belonging to a group, you will not be able to identify if he is administrator or not of the group. So it will not be possible to assign him a specific role that will allow him to populate users in that group only.
For your information, you can use the role "pcd:portal_content/administrator/user_admin/delegated_user_admin_role" to allow user to :
  - create other users
  - top grant roles for with they have the "Role Assigment" permissions
  - but not to populate groups (what could lead to security problem, ie you can make your self member of Administrators group, and so have the SuperAdmin role)
Hope this help
Vincent

Similar Messages

  • Error Message For BISystemUser: User not authenticated

    We have migrated from DEV to PROD env.(11.1.1.1 -> 11.1.1.3). Along problems with bipublisher - there are some strange thingths: we successfully loging using weblogic account into AdminConsole и Enterprise Manager, but in Answers we get an error: invalid username or password.
    nqserver.log:
    ...[ERROR:1] [] [] ... [tid: 1090] Error Message For BISystemUser: User not authenticated.
    ...[ERROR:1] [] [] ... [tid: 1090] [nQSError: 43126] Authentication failed: invalid user/password.
    In oracle support we found such issue (Doc ID 1308389.1):
    OBIEE 11g Error: "Unable to Sign in. invalid username or password was entered" After Changing Repository, Deleting BISystem User, Adding it Back (Doc ID 1308389.1)
    Applies to: Business Intelligence Server Enterprise Edition - Version: 11.1.1.3.0 [1905] to 11.1.1.5.0 [1308] - Release: 11g to 11g
    Symptoms: In OBIEE 11.1.1.3.0 using default authenticator, it is not possible to log in to OBIEE after changing repository. To troubleshoot, BIsystemuser was removed from global roles and added back again.
    Getting error: Unable to Sign in. invalid username or password was entered
    Changes: Changed repository, deleted BISystemuser, added the user back
    Cause: Several changes e.g changing rpd, deleting bisystem user, adding the user back etc. occurred in the environment and caused log in to OBIEE to stop working
    Solution: After a lot of troubleshooting e.g re-starting system in the correct order, refreshing GUIDs, re-start OBIEE with default SampleAppLite.rpd and web catalog, the error persists. The system was uninstalled and re-installed to avoid further corruption and configuration problems in the new installation. This resolved the problem
    Does we have to 'reinstall or make a lot of troubleshooting e.g re-starting system ' to solve this error?
    It seem to be funny for PROD environment. How we cam resolve this problem?

    Are you saying you upgraded both dev and prod from 11.1.1.1 to 11.1.1.3 or that you migrated a dev 11.1.1.1 to a prod 11.1.1.3? What did you migrate?
    At a rough guess the BISystemUser password is different in dev and prod (created by system on install) and in your 'migration' you've moved the dev credential across to prod.
    If that's the case you need to change the bisystemuser password to something known and update the credential store password.
    Another possibility might just be that you need to regenerate the GUIDs:
    http://download.oracle.com/docs/cd/E21764_01/bi.1111/e10543/privileges.htm#BIESC721

  • Recording NWBC scripts for End User Experience

    Hi Experts,
    I am recording NWBC scripts using the Netweaver Business Client GUI for loading and running it through Robots for End User Experience Monitoring. I don't see an option to "LogOff" in NWBC client while recording  the script. We only have option to "Close all session and LogOff" in NWBC client .
    When I am using this option, it closes all the sessions including the EEM Recorder also without saving the recording .
    I need to include "LogOff" as the last step so that it doesn't leave any active sessions for each run by different robots.
    I have a Solution Manager 7.1 SP10 and NWBC client 3.5 Patch 13.
    Please help me achieve this.
    Regards,
    Manish K

    Hi,
    for a browser the recommendation is to open a new, empty tab to keep the browser alive while closing the tab with the  session. All that with the hope that the backend will use the triggered event of collapsing tab to close session.
    Maybe a similar strategy works for NWBC.. but I don't know the UI in detail.

  • Reset passwork for end user using XE version 2.1.0.00.39

    Hi All,
    I would like to create a link "Change Password" for end users to able to change their password anytime. I've followed the link below
    Self Reset Password
    but it still require the admin login before end users can change their password.
    The following steps that I did:
    1. Under "Shared Components", create a Navigation Bar entry name "Change Password".
    2. On page 1, click on the "Change Password" link under Navigation Bar and entered
    Target Type = URL
    URL Target = javascript:popupURL('f?p=4350:53:&SESSION.:::53.F4350_P53_USER_NAME::APP_USER');
    How do i make the "Change password" link go directly to reset password page after end users clicked on it without admin login require? I'm using a default authentication and all end users assigned to user group.
    Thanks in advance,
    Kevin

    Kevin,
    You want the users to go to popup page 58 (in application 4350). See this thread: Re: Pop Up Change Password Window . But I don't know if that will work in 2.1.
    In general, you're better off using other types of account management tools such as LDAP.
    Scott

  • Page customization for end user

    is it possible to use other mechanism for end users to customize their own pages instead using the portal features since it's a little complicated cause each user needs to create new pages, add portlet, etc.
    Can we use the mechanism like my cnn, my yahoo,excite and how to do that in a simple way?
    thanks for helping

    Hi,
    I have the same question, but I would like to have a seperate page or application, showing only predetermined portlets, for users to choose from and place on their page. I do not want the end user to ever see the customization process Oracle uses. Can this be done???
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Karthika Siva ([email protected]):
    A simple way to do this:
    1. Create a page that will become the default page for end users. This page will have your branded look & feel (style) and contain a default set of portlets. These are portlets that you think your typical user will find useful.
    2. Create portal user.
    3. Grant one of the following privileges on the page to the user. Grant 'Full Customization' or 'Add Only Customization' depending on how much control you want to give the end user. Keep in mind that both of these privileges allow the end user to only customize their PRIVATE VERSION of the page. Others will see the default, or their own version if they have also personalized it. See the online help on the Access tab of the Customize Page screen for a description of the privileges.
    4. Once that is done, set this page as the default home page for the user. You can do this using the Preferences tab on the edit user screen.
    Now the portal user can log into the portal, and personalize his/her page by customizing portlets on the page, hiding/showing default portlets, and even adding other portlets to the page.<HR></BLOCKQUOTE>
    null

  • CProjects for end users

    Afternoon all, i've recently installed cProjects as a add on to a WEBAS system, i'm after some useful links/information about how to use the product at all, as i've no real experience of it.
    Any help would be much appreciated, the SAP guides don't seem to be suited for end users thats all....

    Hello James,
    From your post I cannot make out which release of cProjects have you installed (3.1 or 4.0). Any way pl find below the links to the help.sap.com portal which is a detailed guide to cProjects Suite.
    cProjects Suite 3.1
    http://help.sap.com/saphelp_cpro31/helpdata/en/home.htm
    cProjects Suite 4.0
    http://help.sap.com/saphelp_ppm400/helpdata/en/index.htm
    Hope this helps.
    Rgds
    Deepak

  • SCSM 2012 SSP Permission for End users

    Hello Experts,
    I have an issues with SSP - SCSM 2012 SP1.
    As an admin user, I can see theOfferings, see the pending requests, can see the requests I have submitted, Approve them etc. But when I am an end user, browsing from my laptop, I see a blank Home page. I dont see the Service offerings in the
    homepage..even I dont see the Need Help? text. What is the issue? FYI : Silver light is already installed on my laptop.
    Interestingly, I see the Need Help? text with the same end user credential when I am opening the browser inside the server wher SSP is installed.
    But, in both the cases, whether I browse in the server or from my laptop, I dont see the service offerings anywhere when i am an end user. I followed the below article..but no success.. :(
    http://systemcentertech.com/2012/06/28/scsm-2012-portal-service-catalog-empty-for-end-users/
    Please help...
    Thanks!
    Thanks

    Hi,
    Did you add the Service Offerings and Request Offerings to the Catalog Group? Here is another good blog on this you can reference:
    http://www.concurrency.com/blog/scsmportalpermisions/
    My Blog | www.buchatech.com | www.systemcenterportal.com
    If you found this post helpful, please give it a "Helpful" vote. If it answered your question, remember to mark it as an "Answer". This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion
    in a test environment before implementing!

  • Applet Debugging Option for End Users

    Users in our 12.0.4 development system that only have the 'xMII Users' role can see and use the 'Applet Debugging' option under the System Management menu.  I'd prefer them to only have the options under the Support menu.
    I'm puzzled why this one option is availble for end users.  What am I missing?
    David Macindoe

    What am I missing?
    I guess nothing.
    Its just that it is designed this way. Moreover the option is harmless from a Security point of view.
    May be you will find this 'fixed' in later versions.

  • Training Material for end-users

    Hi SAP Gurus,
    I need to prepare a Online Quick Reference (OLQR)/questionnaire/FAQ's (SAP R/3 4.7 -FICO and integration of FI-SD & FI-MM), for the end-users, which they will refer to after Go-Live.
    I also need to prepare training material for end-users for (SAP R/3 4.7 -FICO and integration of FI-SD & FI-MM),to be used during the training session's prior to Go-Live.
    I would appreciate, if someone could please send me project documents related to the same on my email id [email protected]
    This is very urgent and I have to complete the documents ASAP, so please reply at the earliest.
    Thank you all in advance.
    -- SJ
    null

    Hi Ravi,
    Thanks alot for your help.
    But, I was looking for some Project documents that I can refer to for preparing Training Material and questionnaire/FAQ's/online documents (SAP R/3 4.7 -FICO, SD & MM) for the end-users, which they can refer to after Go-Live.
    It would be great, if you could please send me some project documents on my email id: [Email removed by moderator]
    Thanks,
    --SJ
    Message was edited by:
            Mario Herger

  • Failed to update permissions used for end-user recovery on . Permissions update failed for the following reason: (ID 3123)

    I patched 2012 to the SP1 level and now I'm getting these warnings on many servers.
    It seems to be considering these items as removable media?
    DPM 2012, SP1, version 4.1.3313.0
    Failed to update permissions used for end-user recovery on skutter.pmuk.net. Permissions update failed for the following reason: (ID 3123)
    Affected area: skutter.pmuk.net
    Occurred since: 11/01/2013 09:04:43
    Description: Failed to update permissions used for end-user recovery on skutter.pmuk.net. Permissions update failed for the following reason: (ID 3123)
     DPM is unable to enumerate contents in 2aad3f75a7e54a0f91b640d7f158f00a , 5702fef3756e4ca8af0554013951f32d , 78f9e6070fbd43aeb328700a88a3c926 , aquaria.pmuk.net_MTATempStore$ , ariel.pmuk.net_MTATempStore$ , atlantis.pmuk.net_downloads , atlantis.pmuk.net_MTATempStore$
    , atlantis.pmuk.net_print$ , capricorn.pmuk.net_MTATempStore$ , CCM.pmuk.net_IvrDirectory , CCM.pmuk.net_MTATempStore$ , CHIRON.pmuk.net_MTATempStore$ , cpeserv-i03.pmuk.net_IMAGING , defiant.pmuk.net_idsc , defiant.pmuk.net_MTATempStore$ ,firebird.pmuk.net_Accts_serve
    , firebird.pmuk.net_case , firebird.pmuk.net_Control ,firebird.pmuk.net_Fuel Cell , firebird.pmuk.net_HADCAD , firebird.pmuk.net_haddesign , firebird.pmuk.net_hadendurancelab , firebird.pmuk.net_HADEngCad , firebird.pmuk.net_HADPCLGainspeed ,firebird.pmuk.net_HADPCLProjects
    ,firebird.pmuk.net_HADPCLQuality  , firebird.pmuk.net_HADPCLStandards , firebird.pmuk.net_hrXerox , firebird.pmuk.net_hs , firebird.pmuk.net_ITXerox , firebird.pmuk.net_JunHigashimura , firebird.pmuk.net_MTATempStore$ ,firebird.pmuk.net_office  ,firebird.pmuk.net_OMPM
    , firebird.pmuk.net_Outplacement ,firebird.pmuk.net_personal , firebird.pmuk.net_PJSESCANNER  ,firebird.pmuk.net_pmuk ,firebird.pmuk.net_pwa ,firebird.pmuk.net_pwa2 , firebird.pmuk.net_scanfret ,firebird.pmuk.net_Siebel8  ,firebird.pmuk.net_Spares 
    ,firebird.pmuk.net_test   ,firebird.pmuk.net_TVDC ,firebird.pmuk.net_xeroxcpe$  ,firebird.pmuk.net_xeroxrd$ , HALLEY.pmuk.net_MTATempStore$ ,legion.pmuk.net_dfs ,legion.pmuk.net_MTATempStore$ , legion.pmuk.net_NETLOGON  ,legion.pmuk.net_SYSVOL
    , nemesis.pmuk.net_KEvin  ,nemesis.pmuk.net_MTATempStore$ , PLEIDES.pmuk.net_Archive , PLEIDES.pmuk.net_DGHOME , PLEIDES.pmuk.net_MTATempStore$  ,PLEIDES.pmuk.net_print$ , roosevelt.pmuk.net_ARCserve$ ,roosevelt.pmuk.net_CHEYALERT$ , roosevelt.pmuk.net_HADQCEOLP
    ,roosevelt.pmuk.net_home3 , roosevelt.pmuk.net_MTATempStore$ ,roosevelt.pmuk.net_smssource , roosevelt.pmuk.net_WindowsEasyTransfer ,roosevelt.pmuk.net_XeroxScan , sagittarius.pmuk.net_MTATempStore$ ,sagittarius.pmuk.net_print$ , sakura.pmuk.net_MTATempStore$
    ,scorpia.pmuk.net_MTATempStore$ ,scorpion.pmuk.net_chandleram, scorpion.pmuk.net_Control  ,scorpion.pmuk.net_CPE ,scorpion.pmuk.net_Digital  ,scorpion.pmuk.net_Electrical , scorpion.pmuk.net_MTATempStore$ , scorpion.pmuk.net_NASUtils ,scorpion.pmuk.net_Personal
    ,scorpion.pmuk.net_QA ,scorpion.pmuk.net_QC , scorpion.pmuk.net_Technical , silverberg.pmuk.net_dfs  ,silverberg.pmuk.net_MTATempStore$ ,silverberg.pmuk.net_NETLOGON , silverberg.pmuk.net_SYSVOL ,skutter.pmuk.net_dfs , skutter.pmuk.net_MTATempStore$ ,skutter.pmuk.net_NETLOGON
    ,skutter.pmuk.net_sharepoint-saver ,skutter.pmuk.net_SYSVOL , tempest.pmuk.net_MTATempStore$ , tempest.pmuk.net_Quarantine ,tempest.pmuk.net_SiteBackups , tempest.pmuk.net_tsdp , titania.pmuk.net_MTATempStore$ , valiant.pmuk.net_domino , valiant.pmuk.net_hadprod
    , valiant.pmuk.net_MTATempStore$ ,valiant.pmuk.net_oracle ,vindaloo.pmuk.net_MTATempStore$ , virgon.pmuk.net_faxclient ,virgon.pmuk.net_FxsSrvCp$ ,virgon.pmuk.net_MTATempStore$ , xavier.pmuk.net_Address ,xavier.pmuk.net_downloads ,xavier.pmuk.net_drivers ,
    xavier.pmuk.net_Exchange IS Starter ,xavier.pmuk.net_ExchangeOAB , xavier.pmuk.net_ExchangeUM , xavier.pmuk.net_MTATempStore$ , xavier.pmuk.net_out-arch , xavier.pmuk.net_Resources$ on the protected computer tower.pmuk.net. Recycle Bin, System Volume Information
    folder, non-NTFS volumes,  DFS links,  CDs,  Quorum Disk (for cluster) and other removable media cannot be protected. (ID 38 Details: )
    Any Ideas? backups are OK, recovery points/sync's etc.
    Mark.

    I am using DPM 2012 R2, what finally worked to me to resolve my problem with EUR was to:
    In DPM I disabled EUR
    In Computer Management delete all DPM Shares (\\?\c:\Program Files\...)
    Using ADSI edit go to CN=MS-ShareMapConfiguration,CN=System,DC=X,DC=Y (Replace X & Y for your domain)
    Delete all of the mappings within the container
    In DPM enable EUR
    In DPM on a protection group I created a new recovery point and selected “Only synchronize (available only for file data)”
    Related article on ADSI Edit and DPM -
    http://social.technet.microsoft.com/Forums/en-US/e0258384-8422-408c-8839-2580d616a9ec/edsi-edit-related-to-data-protection-manager?forum=dpmfilebackup
    I hope this helps
    JD Young

  • Utilizing the Workspace for end users

    Trying to see how can I utilize the existing workspace for "end users" who are supposed to access the application, I have two questions:
    1- How to remove the extra regions, logos and etc.
    2- How to add link to the application
    Thanks,
    Mehr

    I'm not clear on your question, but I'm going to take a wild stab in the dark and think you would like to customise the workspace login
    http://www.grassroots-oracle.com/2013/02/modifying-apex-workspace-login-page.html
    Why not provide them the appropriate URL in the first place?

  • Form Designed in LiveCycle will not work for End User

    Please Help!
    I am a newbie to Adobe LiveCycle but recognized the utility in the program, so decided to give it a while to try and streamline some of my employer's forms.  After spending too much time learning how to design a form (much to the dislike of my boss), I am finally going to have to ask for some help.  So here's the deal:
    I've designed a dynamic pdf in LiveCycle with two master pages and two repeating flowed subforms.  The first repeating subform is basically an expanding table intended to be used as a photographer's log where they can log each photo taken with the camera.  The expanding table has some code with a button at the top for the end user to enter the number of photos on the photo roll, click submit, and table expands to however many instances of rows are needed for each photo that was taken.  The second subform is basically an image field and text fields used as photo captions/photo compilation pages.  When the end user clicks submit on the first subform to expand the table, I also have javascript in that click event to also create same amouint of instances of the second subform (the photo compilation page(s)).  Each text field for the photo caption on the second subform is populated by the data entered into the photo log table cells.  I was able to find a script to correctly populate those fields for each instance of the table.  Wish I had the form here, but it's at work at the moment.
    My problem is this: I've scratched and clawed to get all of the forms expanding correctly and the scripts populating each instance of the fields correctly and everything works great in LiveCycle preview.  I then saved the form as PDF for use by my field crew personnel (whom all use, at the very least, Adobe Pro 9, but most Pro X).  I sent the new form to them and they move it to their desktop, open it with Adobe Pro, and populate all of the fields and everything works swimmingly.  However, once they save it, it gets all jumbled and they can't even print it.  We even thought we found a workaround by entering all data and printing to PDF, but even that has turned out to not work.  I checked to make sure that I designed and saved the form in LiveCycle for use with the Adobe Pro versions, but still not working for my end users.
    Anyone have any thoughts on my long explanation??  Please HELLLLPPPP!

    The error(s) occur when trying to save the document.  I want each user to tell the first page how many rows they will need in the photo log table, so they would enter however many photos were taken in the box: "Number of Photos on Roll:"  ---> Then click the "Submit" cmd button.  That should expand the table.  Once it expands, it should also add the same amount of instances of the photo compilation page (2nd Page) as there are rows in 1st page table.  Then the user will populate each cell of the table on page 1 with data.  The data entered into the page 1 table cells will populate the text fields (photo caption) in Page 2 once the user clicks on the "Populate Captions!" cmd button in the lower left corner of the table on Page 1. 
    The problem is in the distributing of the form to the user so they can save the form after populating the data.  I did a test run this morning and for some reason it did do the "print to PDF" correctly for 5 photos on the roll (though this has not been happening every time and especially for a large number of pages, ie. 80 photos).  However, after entering the data for 5 rows on page 1 and then populating the 5 photo compilation pages, I saved a copy as "Save As PDF" and closed the document.  Then re-opened the copy in Acrobat Pro X.  The new copy:
    -had 5 additional rows added to Page 1
    -Duplicates of some of the fields
    -Only retained the 1st instance of the Second Page (Photo w/ Caption) and not all fields were populated
    Again, this all works fine in the LiveCycle Preview but not anywhere else.  I do not have this set up to be linked to an external data source (YET) but there is javascript in the cmd buttons.  I also do not want to distribute this form to end users and then collect the data back from them.  I want them to be able to save a copy of my LiveCycle designed form, open in Adobe Pro, populate the data and save as many copies as needed for form production.

  • EAS link for end user

    Hi There,
    I would like to provide selected end users to access EAS link, so they can look at the dim structure. We use Share Serices for security, my quesitn is that what role or right I need to provide to end user, so they can only view the database structure (dimensions) from EAS.
    Thanks
    Don

    Hi Don,
    Does the user get "no access" error message if he/she right clicks on the outline and click on View?
    I created a test account, provisioned it with server access to the Essbase server and read access to the application. I got the same error message as you mentioned when I double clicked on the outline, but was able to open it with "View" option.
    Cheers,
    Mehmet

  • Is there a way for end users to give their manager access to change their Out of Office, without an admin involved?

    Our end users need to be able to give their managers access to enable their out of office. 
    question 1.  Can this be done without giving them full access?
    question 2.  If they need full access, can the end user themselves give this access? (I've tried giving another user "owner" rights, but the user still can't seem to open my calendar from OWA to adjust my out of office)
    question 3.  Can this be done without an Sys Admin being involved?

    You can create a RBAC role for each manager scoped to each of their employees that lets them run the Set-MailboxAutoReplyConfiguration cmdlet on the exchange server. Otherwise they will need full access to the users mailbox which an admin would have
    to grant, the end user can not grant this permission. Then they can open the other users mailbox in OWA and set the OOF
    DJ Grijalva | MCITP: EMA 2007/2010 SPA 2010 | www.persistentcerebro.com

  • Download and Upload  Report Layout for End User

    hi, i did the following
    1. create an xml data file
    2. load in in bipublisher
    3.create a layout
    4. create a report query in apex and load the rtf created in step 3
    5. test the report.
    it works fine.
    my requirement is for trained end users (bipublisher trained) to download the rtf and edit it if need be. most of the editing will be text and they will not be editing any data fields. i will create a button for the end user to download the report layout, but what api can i use to download the rtf for them and where should i move the report layout (any apis for this) upon upload after the rtf is edited by the user.
    thanks
    a

    hi check this document
    http://docs.oracle.com/cd/E21764_01/bi.1111/e13880/T539768T526688.htm#5851577
    http://docs.oracle.com/cd/E21764_01/bi.1111/e13880/T539768T526688.htm

Maybe you are looking for