Error(-101) encountered when trying to send a mail

Hi,
I am trying to send a mail through Business One 2005A. When i click on the email icon, a pop up window appears that asks if i want to attach an edited report with the mail. when i click "Yes", i get an error message error(-101) encountered. but if i click "No", i dont get that error. Can anyone please let me know what this error is all about?
Regards,
Harsh

Hi Fulvia,
This could be caused by folder permissions. Try creating a new share on the server (I typically create a share off the root of the drive, called something like B1_MAIL or SBO_MAIL), granting Full Control to all domain users and then mapping your attachments path in General Settings to this new folder. If this solves the problem then you can tighten up the security to fit your requirements afterwards.
Hope this helps,
Owen

Similar Messages

When trying to send e-mail I get an error message:

When trying to send e-mail I get an error message:Can´t send message.
It was not accepted by the server because it (the server?) does not allow forwardin.

Check the outgoing mail server setting. Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

"This message cannot be sent at this time." I have been getting this pop-up for 3 days when trying to send out mail. I don't know what to do! I cannot send mail from this account on any ISP. Please help!

"This message cannot be sent at this time." I have been getting this pop-up for 3 days when trying to send out mail. I don't know what to do! I cannot send mail from this account on any ISP. Please help!

lots of people seem to be havgin a problem sending email from iCloud webmail.
does your email address have uppercase characters in it?
if so, try creating an alias in lowercase (go to preferences in iCloud webmail and select 'accounts') and see if email sends okay from that

When trying to send E-mail via AOL i get the message "rejected by the server because it does not allow relaying" I have checked settings as per answers to similar question

When trying to send E-mail via AOL i get the message "rejected by the server because it does not allow relaying" I have checked settings as per answers to similar question

From which account does the email not send? When sending from an account, the iPad will first try to use the aoutgoing server for that account. If it can't it will try the other accounts listed.in the setting on the iPad for that account. It soulds like the server for the account is not working and that the alternate server is resjecting the messag since it did not originate ffrom the account associated with that server, That is to prevent sending spam.

Error message mes when trying to send PO via IDOCS to another system?

Hi Abap expert,
I am getting wired message what I ma trying to send PO via IDocs to other SAP system.
I went to all partner , port configurations on WE20 and everything there seems to be fine but once I go to ME23N, then GO TO -> MESSAGES , than opens another windows when you key in MESSAGE CONTROL DATA that have been mantained
in the outbound parameters in the PARTNER PROFILE configurations.Then I am getting the message :
'No communication data has been defined for transmission medium 6'-----
The LED on "PO:output screen' is YELLOW and never gets green.
Can someone tell me how to overcome this and send my PO Idocs?Please some more details will be appreciate it!
Thank you much eveyone!
Boby

Hi,
Go and check it in NACE tcode, whether , Condition type, output types are maintained or not? if not maintained, Maintain it for 6 -PO for EDI.
Hope this is the error you are getting.
Thanks
Manju

HT204204 Error invalid number when trying to send a TXT message

While trying to send someone a TXT on craigslist, I inadvertently sent a TXT to a 7 digit number. I received back the following message (Where <XXXXXXX> is the 7 digit number I tried to TXT).
I'm using an iPhone 6 (brand new) with the latest iOS. Handoff and TXT message forwarding is set up.
From +1 (1) (216) 116-11:
<XXXXXXX> Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code. (The message I sent went her).
After that I attempted to send to the correct 10 digit number but every subsequent attempt to message the correct number has failed. I have tried the following:
Hard reset of the device.
Deleting the conversation
Creating a contact with the correct number
Using Messages to create a new conversation
Replying to messages received from the number.
However nothing I've been able to do resulted in a message getting sent.

I think your region settings are interfering the format of the US number. What country are your region settings set to?
This is how they should look: +1 (216) 116-1122
The +1 is optional when inside the USA/Canada

Error code 98 when trying to send a text.

This happens with only 1 of my contacts. I am able to text everyone else fine. I have tried 3 different messaging apps. I have tried to power cycle my phone. I have been trying to text this person every other day for about a week, so where I am physically at or when I am trying to send it does not matter. I tried sending with a 1+ area code+ number and area code+ number. Nothing works.
Suggestions?

Gumbydpl, we appreciate your efforts in trying to resolve this issue on your own. Has the owner of that mobile number tried reaching out to their wireless provider to ensure that there's no restrictions for sending text messages to your mobile number?
Lasina_VZW
Follow us on Twitter @VZWSupport

When trying to send a mail, selecting attachement fails with no error.

I imported lots of folders form Kmail (KDE3.5/ trinity) on a previous version (don't remember which one) of Thunderbird.
All worked fine. (I was able to send a variaty of files in email attachements (.xls, .zip, .txt and also files with no extension with no trouble)
Somewhen two weeks ago I updated Thunderbird and it would not allow me to attach files to a mail I want to send.
This means: --click on the button to send a new mail.
--typing a email adress
--typing a subject
--typing 'hello' into the text field
--clicking the button to attach a file
--selecting a text file, picture, .zip, binary and click 'open' in the file selector
== nothing changes in the email window to show that a file has been attached and also on sending the mail the receiver does not receive a mail.
reverting to older version of thunderbird does not seem possible as it appears that there is no link to older packages on thunderbird downlaod site?
where did I go wrong?

I doubt it's a version problem. But I don't run Linux any more.
Old versions can be found here:
http://ftp.mozilla.org/pub/mozilla.org/thunderbird/releases/

DMP when trying to send a mail

Hi Experts
My client is on 8.81 PL04 and for only one of the users, when they try send an internal mail, it gives the following error:
Documents settings V Lettie\Local settings\applications data \ sap \ sa application has a problem
Diagnostic file c:\documents and settings\Lettie\local settings business one\sap business one 20110623160654.dmp was created. Please contact support and attached diagnostic file.
Your assistance would be greatly appreciated.

Hi,
Also to add to my comments, the dump file generated could be related to many factors like, the memory, the number of applications running on the client, add-ons etc. If this is one of I would suggest you to close all applications, clear the temp files , log back in and try. SAP will only investigate if the issue is occuring everytime and should be reproducible and there is a long process before you can log a message with SAP on dump file.
regards
Johnson

How to bypass proxy when trying to send a mail using javamail smtp

Hi,
I am trying to make a servlet send a mail using javamail smtp protocol on port 25 but i m not able to send getting an exception, i suspect proxy is blocking, so any idea anyone how bypass a proxy.

And if it does turn out that there's a proxy server blocking access to your target SMTP server, the best way to deal with that is to discuss the issue with the person responsible for your network configuration.

Rejected password when trying to send e-mail

When I try to send mail, I get a 'rejected password' message no matter how many times I reenter the password. What could be the problem? I lost one e-mail account when I did an upgrade to high speed about a week ago, and haven't been able to use my new e-mail account to send e-mail messages. I can receive messages using my new account and think all of the server information is correct---all in all-- a confusing mess.

Yes, Bj,
I'm using Apple Mail version 3.6.
Where exactly do I put the fully qualified 'user name'?
I have three columns at the top of the page, Description, Server Name already filled in, and In Use By Account already filled in.
If I click on the Server Name I'm using, another option shows up at the bottom of the page, called Account Information, and below that a place to type in Description. Is that where I'd type my full e-mail address?

No Send button when trying to send new mail

This just started yesterday, when I open the new mail dialogue to send an e-mail there is no toolbar with the "send, save etc." buttons. So there is no way for me to send the e-mails that I'm drafting. I can send replies to emails but not when I am writing a new e-mail. Please help! I use e-mail a lot with my job and this is becoming a problem!

KerryJ wrote:
This just started yesterday, when I open the new mail dialogue to send an e-mail there is no toolbar with the "send, save etc." buttons. So there is no way for me to send the e-mails that I'm drafting. I can send replies to emails but not when I am writing a new e-mail. Please help! I use e-mail a lot with my job and this is becoming a problem!
in a new message window click on the little oval in the upper right corner.

Error when trying to send e-mail

When running the following code:
import oracle.ifs.common.IfsException;
import oracle.ifs.common.*;
import oracle.ifs.beans.LibraryService;
import oracle.ifs.protocols.email.beans.Mailbox;
import oracle.ifs.adk.mail.IfsMessage.*;
import oracle.ifs.adk.mail.*;
import oracle.ifs.server.*;
public class test
public static void main(String[] args)
try
LibraryService service = new LibraryService();
CleartextCredential me = new CleartextCredential("system", "manager");
ConnectOptions options = new ConnectOptions();
options.setServiceName("IfsDefault");
options.setServicePassword("manager");
options.setLocale(Locale.US);
LibrarySession session = service.connect(me, options);
DirectoryUser user = (DirectoryUser) session.getDirectoryUser();
if (user.isAdminEnabled())
session.setAdministrationMode(true);
IfsMessage msg = new IfsMessage(session);
msg.setToHeader(new String[] {"[email protected]"});
msg.setFromHeader(user);
msg.setContentType("text/plain");
msg.setSubject("iFS email test message");
msg.setBody("Hello! This is a test. If you got this, something is working right.");
msg.send();
catch (IfsException e)
e.printStackTrace();
...we get the following message:
java.lang.ClassCastException: oracle.ifs.beans.TieFolder
at oracle.ifs.adk.mail.IfsMessage.<init>(Compiled Code)
at oracle.ifs.adk.mail.IfsMessage.<init>(Compiled Code)
at test.main(Compiled Code)
Thanks in advance for any ideas you may have.

This code snippet works for me... It places the message in the system outbox.
Can you check that your system outbox exists
at /ifs/outbox
and that it is an instance of 'FOLDER' and the that the ACL on it ' is protected (system)'.
public void doSomething(LibrarySession ifs)
throws IfsException
IfsMessage msg = new IfsMessage(ifs);
msg.setToHeader(new String[] {"[email protected]"});
msg.setFromHeader(ifs.getDirectoryUser());
msg.setContentType("text/plain");
msg.setSubject("iFS email test message");
msg.setBody("Hello! This is a test. If you got this, something is working right.");
msg.send();
null

Error when trying to send e-mail: javax.mail.MessagingException: can't dete

Any help on the below error would be appreciated?
javax.mail.SendFailedException: Sending failed;
nested exception is:
javax.mail.MessagingException: can't determine local email address
at javax.mail.Transport.send0(Transport.java:218)
at javax.mail.Transport.send(Transport.java:80)
at com.rightworks.maildispatcher.MailDispatcher$SenderThread.sendMessage
(MailDispatcher.java, Compiled Code)
at com.rightworks.maildispatcher.MailDispatcher$SenderThread.run(MailDis
patcher.java:536)
Cannot send mail file s1io.d.xml : Sending failed;
nested exception is:
javax.mail.MessagingException: can't determine local email address

Appears to be related to specifing the mail.from input.
Works now.

PSE 7 stops working when trying to send e-mail

I am running PSE 7, Vista 64. When I try to send a pic using e-mail attachment thru Adobe e-mail svc (AOL e-mail account), PSE 7 crashes. I get a Windows msg saying the PSE 7 stopped working & Windows closes PSE 7. I can see the e-mail msg, but no go. Help.

Check the outgoing mail server setting. Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

Error(-101) encountered when trying to send a mail

Similar Messages

Maybe you are looking for