Error 1011 in shopping cart - HELP

I selected The Postal Service "Give Up" album. iTunes will not let me purchase it, or remove it from the list. It will also not let me purchase anything else while it is on the list - and I can't remove it. When I try to purchase I get the message "Your shopping cart's content has changed. Please review your shopping cart and click Buy Now."
When I try to remove the album, I get the "Could not remove an item from your cart. An unknown error occurred (1011)"
Help me out here - I can't do anything!

Ok so I admit it I have been using it as a wishlist and its big...
I can modify my behavior to the wishlist.
But that doesn't solve the current problem that I get this error and I can't do anything with the cart. Acesss, buy, delete... nothing.
BTW I'm a proud cube owner.

Similar Messages

Send backend error notification to shopping cart creator/requestor

Hi Gurus,
We are currently using SRM7.0 classic scenario. In RZ20 transaction code, errors on the shopping cart appeared. We have a requirement for the ff:
Send a notification to user informing them about the backend application error,
Download and store the error in file server or a custom table
and Delete the error from the application monitor
Please advice if you have encountered any of these.
Thanks.

Hi Gerhard!
Did you check DC30 in the backend to have the type of file used in the attachment?
We had a similar problem after the last patching and SAP advised to change the file format in DC30 in the backend to show for example: instead of *.xls change to .
I hope this helps.
Regards,
Elisabeta

Error message during shopping cart approval

Dear gurus,
A user has encountered an error message when approving a shopping cart.
The error message is "Shopping cart xxx (PReq. xxx): ME 020 Item category D not allowed with document type xxx".
The PR is not created at the backend.
Do anyone has encounter this error message before?
Appreciate for your help.
Thanks in advance.
Regards,
Santthi.

Hi,
Seems like your SC is trying to create service purchase requisition with item category D for your PR doctype in the backend.
Your PR doc type definition does not have item category D defined for it in MM backend.
Best regards,
Sridhar

How to display error message in Shopping Cart?

How to display error message in Shopping Cart and stop the shopping cart for further processing? I try MESSAGE w001(zshop) or MESSAGE e001(zshop). But it is causing run-time error.

Hi Paul,
In the DOC_CHECK or DOC_SAVE BADI, you have a global internal table named et_messages. The structure of this table is 'bbp_smessages_badi'. You can append your error message here by inputting the message type, ID and number. The message type is either 'E' for error or 'W' for warning and the number would depend on your message class(ID). You will be able to see the error message on top of the screen, can be a red or yellow highlight depending on your appended message. I don't think creating the error message via the MESSAGE syntax will be successful, maybe this is why you are getting a runtime error.
Regards,
Noel

Change public template BBPSC06 (Error in system; shopping cart cannot be pr

Hi,
I am in SRM_SERVER 5 (SRM 4) SP 14.
I have dome my standard templates without problems, but when I try to change I get this error when I go to transaction BBPSC06 (with same user).
Error in system; shopping cart cannot be processed further
does anybody know why is appearing this error?
thanks
Best regards

HI
THIS TRANSACTION CAN BE USED BY PURCHASER
BBPSC05 and BBPSC06 How to create / change public template?
is he purchaser?
BR
MUTHU

SRM 7.0 Process-Controlled (BRF) Workflow -- Error message to Shopping Cart

I am modifying a BRF Expression used to calculate approval levels. During this calculation, I may run into error conditions (e.g. Currency tranlsation not found) that I want to display to the user (in the Shopping Cart).
I have tried raising the following exceptions:
/sapsrm/CX_WF_RULE_ERROR.
/sapsrm/CX_WF_RULE_ABORT.
Raising these exceptions do result in SLG1 log entries being written, but the User is not informed of the error (ie. at top of shopping cart where other messages display).
I can probably jump out of the Webdynrpo to read logs, but thought there MUST be some standard way of passing error conditions from the BRF, back to WF, and then back to the Webdynpro Window.
Anybody raise error messages back to the online user from Process-Controlled Workflow?
Thanks,
- Tim

>
Saravanan Dharmaraj wrote:
> Hi Tim,
>
> I am not sure about your business requirement, but if you want to display custom error message while user create a SC, SAP has provided a standard BADI - BBP_DOC_CHECK_BADI. You can implement this Badi to raise a custom error,warning message. You can build your brf logic in the BADI implementation..
>
>
> Best Regards,
> Saravanan Dharmaraj.
Hi Saravanan,
I am actually modifying the Approval Limit Checks (for multi-currency translations) that you recently coded in Maryland. It can occur that errors occur in determining limits (new Currency translation I just added), or during the lookup of agents (ie user config is inconsistent).
In these cases, I can make the shopping cart Dump, by raising untrapped error messages, or assertions. However, I would like to raise exceptions that get trapped (such as the ones I identified in original post), and then make their way to the shopping cart.
Unless I am missing something, I don't think the WF BADIs, or BRF are gonna communicate errors back to the shopping cart, even though these components are called during cart creation and checks.
I realize that I can recode the Agent Determination BADIs, BRF calls, or even read BRF logs within BBP_DOC_CHECK_BADI. I mentioned this in my original posting as well.
Anyway, any help is appreciated.
Thanks,
- Tim

Error while creating shopping cart. in SRM 7.0

HI experts,
                     while creating a shopping cart in SRM 7.00 we r getting following error messages.
Exception Data
Date:     17.08.2010
Time:     13:36:11
Short Text of the Message:     An exception occurred
URL:     http://hpsrm.iscodom.com:8001/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
Path:     /sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
Message ID:
Message Type:
Message No.:
Message Variable 1:
Message Variable 2:
Message Variable 3:
Message Variable 4:
Error Code:     558
Error Text:     RABAX_STATE
Runtime Error:     UNCAUGHT_EXCEPTION
ABAP Call Stack
: Method: ABORT of program /SAPPSSRM/SAPLBO_BASE
Method: /SAPPSSRM/IF_BADI_WRAPPER~CHANGE of program /SAPPSSRM/SAPLBO_BASE
Method: /SAPPSSRM/IF_BADI_WRAPPER~START of program /SAPPSSRM/SAPLBO_BASE
Method: HANDLE_PD_START_EVENT of program /SAPPSSRM/CL_BADI_WRAPPER=====CPForm: PROCDOC_CREATE of program SAPLBBP_PDFunction: BBP_PROCDOC_CREATE of program SAPLBBP_PD
Method: CREATE_SC_INT of program /SAPSRM/CL_PDO_FACTORY_SC_ADV=CP
Method: CREATE_NEW_INSTANCE of program /SAPSRM/CL_PDO_FACTORY_SC_ADV=CP
Method: CONSTRUCTOR of program /SAPSRM/CL_CH_WD_BOM_SC=======CP
Method: /SAPSRM/IF_CH_WD_MAP_FACTORY~CREATE_SC_MAPPER of program /SAPSRM/CL_CH_WD_MAP_FACTORY==CP
Regards,
vijay/nitin

Hi NITIN KHAIRNAR Masayuki Sekihara
We are also facing the same issue.
Can you help us out in identifying which BADI is active.
Please help us in solving the issue as we are getting many short dumps on daily basis because of this.
Thanks,
Ramakrishnan

Error while creating shopping cart

HI All,
While creating shopping cart by 3 step procedure, I am getting the error as below
Error when processing your request
What has happened?
The URL http://atlsapsr6.ananthtech.com:8000/sap/bc/gui/sap/its/bbpsc02/~flNUQVRFPTIzNjYxLjAwMy4wMi4wMQ== was not called due to an error.
Note
The following error text was processed in the system SR6 : Incorrect status in pricing
The error occurred on the application server atlsapsr6_SR6_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Function: BBP_PD_ABORT of program SAPLBBP_PDH
Form: ABORT of program SAPLBBP_PDPRC
Form: PRC_MAINTAIN_SINGLE of program SAPLBBP_PDPRC
Function: BBP_PDPRC_UPDATE of program SAPLBBP_PDPRC
Form: PRC_UPDATE_CALL of program SAPLBBP_PDIGP
Form: PRICE_AND_VALUE_DETERMINE of program SAPLBBP_PDIGP
Form: SC_ITM_CHECK of program SAPLBBP_PDIGP
Form: ITMPROC_CHECK_AND_ENRICH of program SAPLBBP_PDIGP
Form: ITMPROC_MAINTAIN of program SAPLBBP_PDIGP
Form: ITMPROC_F_CREATE of program SAPLBBP_PDIGP
and While creating shopping cart by 1 step procedure, I am getting the error as below
2 Messages
No approval workflow found. Inform system administrator
You have exceeded your purchasing budget by 10,00 INR
Please suggest what to be done,
Advance thanks
SATYA

http://help.sap.com/saphelp_srm30/helpdata/en/4e/1d74eff196d64e880fd28d41d4502b/content.htm
The budget is defined in the SAP Enterprise Buyer System and does not originate from FI/CO.
You can save the purchasing budget in various objects in the system:
§         User (Transaction SU01)
Tab Personalization ® Personalization object BBP_USER_BUDGET:
Here you define the amount, currency and validity of the purchasing budget.
A budget defined here has the highest priority and is called in every case.
§         Role (Transaction PFCG)
As under User (above).
Each user that is assigned to this role has the budget of this role.
This budget is subordinate to the budget assigned to a user.
§         Organizational Plan (Transaction PPOMA_BBP)
Organizational Unit ® Extended Attributes ® Purchase Order Limits ® User Budget:
Here you define the amount, currency and validity of the purchasing budget.
This budget is subordinate to the budget assigned to a user.
If budgets have been defined both for the role and for the useru2019s organizational unit (and none for the user himself), then the budget with the highest value is used.

Attribute error while creating shopping cart in portal

Hi,
We are using SRM 7.0 . While creating shopping cart in portal , I am getting error " the attribute of the user are inconsistent or not defined. See transaction ppoma_bbp "
I have maintained attributes of ACS,BSA,BUK,BWA,CUR,KNT,WGR & WRK . Done attribute check in BBP_ATTR_CHECK, it issued warning message for CAT attribute. All other attributes are Ok.
Could anybody help to resolve this.
Regards
Ayyappan

HI
Step 1: Check the consistency of the User for Shopping Cart using Transaction BBP_CHECK_CONSISTENCY. THis will give you a snapshot of what is missing in user's attributes for creating a SC.
Step 2. Go to PPOMA_BBP and note down the Position id and CP id of the user. Then check the consistency of these objects using BBP_BP_OM_INTEGRATE.
It seems the combination of attributes is not in right place for this user
Regards
Virender Singh

Vendor not released warning as an error message in shopping cart

Hi,
When we are creating a Purchase order in SRM R/3 system, If we select a vendor which is not released then we get the Error message saying Vendor is not released and processing stops there.
Similarly while creating a Shopping cart with the same vendor it just gives a warning message instead of error. Is there any way of converting the warning message in case of Shopping Cart to an error message ? Is there any BADI available ?
Thanks,
Sreekanth

Yes when we are creating any shopping cart or any PO , for validations we are using one check badi.
Try this Badi :
BBP_DOC_CHECK_BADI.
Hope It helps......

Error When Create Shopping Cart from catalog SRM

Hi all,
Currently, I have problem need your help.
I tried to create an shopping cart from catalog. But I don't know how the G_L_ACCT was lost.
The information about account like this:
Now, I want to know where this data is selected. Would you please help me for this issue.
Extra Information: Acc_cat = 'A'.

Dear Melynessa: normally you should not get this error message when flagging "Order as Direct Material" in SRM 7.0.
Please, check in your backend ECC6 if "Value updating" flag has been selected or not for the material type of your SC material ID under the IMG path "Logistic - General --> Material Master --> Basic Settings --> Materual Types --> Define Attributes of Material Types"
If field "Value updating" for material type is not flagged then, when creating a PReq or PO in SAP ECC6, you will get always an error message asking you for an account assignment.
Due to the circumstance above, in SRM, materials ID belonging to non-valuated material types should not be ordered as direct (flag order as direct is available always when you enter a material ID, even when it is non-valuated). If you flag the field "Order as Direct" for a non-valuated material, standard SRM system doesn't issue any error message. So, maybe, there is BAdi in your SRM system checking the "Value updating" for material type and avoiding "Order as Direct Material" flag being selected when it is a non-valuated material
Hope it helps.
regards
Valentí

Error in system; shopping cart cannot be processed further

Hi Friends,
Currently I am implementing SRM 5.0 with R/3 Extended classic Scenario.
I have replicated the PR from R/3 to SRM and shopping car is created in Sourcing Cockpit.
While I open the shopping cart by clicking the shopping cart number in SOCO I am getting the error message u201CError in system; shopping cart cannot be processed furtheru201D. I have gone though the SDN for the same issue and I have checked with my system setups are looks fine but still I am facing this issue.
Highly appreciated your help.
Thanks in Advance.
Regards,
Senn.

Only one cart ?
It could be some problem in the sc data.
do you given any special character in the docuemnts tab.
It could be some hide and seek game.
me too faced lot in SRM arena in cockpit. I enjoyed the movement when BUYEr has this issue. then it will be issue for us.
do you get an error in slg1 or rz20 for shopping cart
Muthu

Workflow goes in error when the shopping cart is rejected

Hi All,
We have implemented n step approval workflow.
The issue is when the shopping cart gets rejected, the workflow WS14900032 gets called which sends the mail to approver/initiator/reviewer.
The catch here is this workflow is going in error only in case of approvers and that too sometimes.
Can anybody tell me what might be the issue with this. I have already compared the correct and errored workflow data but do not find anything specific.
Please help.
Regards,
Neha

Hi,
What was the error detail in SWI2_DIAG transaction?
Regards,
Masa

Vendor/Purch Org error in SRM Shopping cart

Dear Experts,
Please help me to unlock the puzzle:
I replicated a new vendor (1339398) in to SRM from ECC.The Purchasing org for the vendor in ECC is MKNY.
When I submit the shopping cart in SRM portal, I am getting the following error:
Vendor 1339398 not intended for purch.org. MKNY (Item Midget 6 A)
Please let me know if I need to check anything in the Org structure.
Points will be awarded for answers.
Thanks in advance,
Bob

Hi Bob
"Vendor 1339398 not intended for purch.org. MKNY (Item Midget 6 A) "
one small question here.
(1) vendor has 1339398 mapped with MKNY purchase organisation via vendor tab in web transaction (maintain business partner).
(2) When you assign a vendor via prefeered vendor you might get searching criteria O 5XXXXXXXX ( this is a purchase organisation) - this O 5XXXXXXXX is your r/3 purchase organisation or not .
(3) This O 5XXXXXXXX ( Pur org) determined based on your purchase group .(i.e product group responsibility in org structure)
3 a . this purchase group must have assigned to the above purchase organisation O 5XXXXXXXXX.
(4) this purchase group is determined by your product category as i said earlier responsibility tab of purchase group.
can you cross check and let me know . we can sort out the problem asap.
regards
muthu

Error While Creating Shopping Cart in Portal.

Hi,
Users are facing some issue while creating the shopping cart in Portal.
This issue they are not facing every time.. Some times it is working fine and some times it is not.
The Error which was logged in the Default trace file is as below:
java.lang.NullPointerException#
at java.lang.StringBuffer.<init>(StringBuffer.java:130)#
at com.sap.portal.pcm.admin.util.StringListTokenizer.<init>(AttributeValueList.java:117)#
at com.sap.portal.pcm.admin.util.AttributeValueList.<init>(AttributeValueList.java:41)#
at com.sap.portal.pcm.admin.util.AttributeValueList.stringToValueList(AttributeValueList.java:55)#
at com.sap.portal.unification.obntargetcreator.ParameterMappingHelper.getRelevantPersistedParametersForSpecificOperation(ParameterMappingHelper.java:414)#
at com.sap.portal.unification.obntargetcreator.ParameterMappingHelper.loadPersistedParametersForOperation(ParameterMappingHelper.java:366)#
at com.sap.portal.unification.obntargetcreator.ParameterMappingAccess.loadParameterMappingData(ParameterMappingAccess.java:58)#
at com.sap.portal.navigation.mapping.OBNParametersMapping.getMappingDesignTimeData(OBNParametersMapping.java:297)#
at com.sap.portal.navigation.mapping.OBNParametersMapping.getMappedDynamicParameter(OBNParametersMapping.java:106)#
at com.sapportals.portal.appintegrator.template_processor.ModifierImpl.getOBNMappedParameters(ModifierImpl.java:305)#
at com.sapportals.portal.appintegrator.template_processor.ModifierImpl.getMappedParameters(ModifierImpl.java:297)#
at com.sapportals.portal.appintegrator.template_processor.TemplateProcessor.processModifier(TemplateProcessor.java:304)#
at com.sapportals.portal.appintegrator.template_processor.compiler.ProcessModifierAction.execute(ProcessModifierAction.java:16)#
at com.sapportals.portal.appintegrator.template_processor.compiler.ProcessTemplateAction.execute(ProcessTemplateAction.java:39)#
at com.sapportals.portal.appintegrator.template_processor.TemplateProcessor.processImpl(TemplateProcessor.java:416)#
at com.sapportals.portal.appintegrator.template_processor.TemplateProcessor.process(TemplateProcessor.java:390)#
at com.sapportals.portal.appintegrator.template_processor.TemplateProcessor.process(TemplateProcessor.java:402)#
at com.sapportals.portal.appintegrator.template_processor.TemplateProcessorService.processTemplate(TemplateProcessorService.java:54)#
at com.sapportals.portal.appintegrator.template_processor.TemplateProcessorService.processTemplate(TemplateProcessorService.java:107)#
at com.sapportals.portal.appintegrator.layer.AbstractIntegrationLayer.processTemplate(AbstractIntegrationLayer.java:442)#
at com.sapportals.portal.appintegrator.layer.URLTemplateProcessLayer.processLayer(URLTemplateProcessLayer.java:33)#
at com.sapportals.portal.appintegrator.LayerProcessor.processActionPass(LayerProcessor.java:161)#
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doActionPass(AbstractIntegratorComponent.java:68)#
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doOnPOMReady(AbstractIntegratorComponent.java:54)#
at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:396)#
at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:249)#
at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:368)#
at com.sapportals.portal.prt.pom.PortalNode.processEventQueue(PortalNode.java:799)#
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:652)#
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:235)#
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:541)#
at java.security.AccessController.doPrivileged(Native Method)#
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:430)#
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)#
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)#
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)#
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)#
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)#
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)#
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)#
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)#
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)#
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)#
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)#
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)#
at java.security.AccessController.doPrivileged(Native Method)#
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)#
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)#
Could any one suggest something how to go ahaead to resolve this issue.
Thanks in advance.
Regards,
Viswes.

Hi,
Hope this is not an application error ,its happens some time if portal is down,So if you get this error contact your basis team..
Regards
Vishal

Error 1011 in shopping cart - HELP

Similar Messages

Maybe you are looking for