Error 1015 when try to update to 4.2 HELP

i found that apple added new update to 4.2 so i choose update after it finish it gaves me error 1015 now my iphone stucks at recovery mode and all i can do is restore and it gives me the same error

I have the same problem! Even I changed a computer, changed another usb, changed everything I can change! if u can find 4.0 ipsw I think u can restore ur iPhone back to 4.0, I did, at least I can use my iPhone.
If you're trying to find 4.0 ipsw u can contact me: [email protected]
I can;t promise this work 2 u either.

Similar Messages

  • TS3694 got error code when try to update my ipad 2

    keep getting 3194 error massage when try to update to ios 511

    Have you got the latest version of iTunes on your computer : error 3194 ?

  • Error 103 when try to update iTunes ? why

    Automatic update advised me updates ready to install but when I try with iTunes get error message 103. Has anyone any ideas please?

    Test after each of the following steps until the problem is resolved.
    Step 1
    If you're trying to install more than one update at the same time, do the installations one at a time.
    Step 2
    Triple-click the line below to select it:  
    /Library/Updates
    Right-click or control-click the highlighted line and select
    Services ▹ Open
    from the contextual menu. A folder should open. Move the contents to the Trash. You may be prompted for your administrator password.

  • Error message when try to update to itunes 7.02

    Hi,
    I'm trying to update my itunes on my iMac G5 but whenever I try to install the update it comes up with
    ' itunesX cannot be installed on this computer. Please quit iTunes before performing this update'
    I know that OS 10.3.9 is required and that is the system that I'm running on so I'm stumped.
    I'm extremely frustrated as I've previously managed OK when updating for the families other ipods, now I've bought my husband the 2G shuffle I can't even get the update to get it to work!

    Make sure all apps are closed completely then click on the blue Apple (Upper Left hand Corner) Go to Software updates..
    That will update itunes for you.

  • IPhone 5 stuck in recovery mode loop, get error 9 when trying to update to ios 7 help me

    so i have tried every way (except a different computer because that option is not available right now). i wanted to reset (factory reset erase all content) my iphone 5 because it was being really wierd. id be using an app all the sudden it would just turn off, try to restart itself, never get past apple logo screen, crash, attempt restart again etc. only when i would hold home and power button it would start up the right way. anyway i went into my iphones settings> general> reset> erase all content and settings. BIG MISTAKE!!!!!!!! ever since then it just have been stuck in recovery mode. the first time i tried to restore it. i got error 3914 i think. doing a little research i found i needed to update itunes so i did (11.1.5.5). then it said i needed to download iOS 7 so i did. and when i try to restore it, i get error 9. itunes is up to date. my windows is up to date. ive tried everything i can think of and im gettin to the point where im gona throe it at the wall
    SOMEONE PLEASE HELPME

    And you have done all include here?
    http://support.apple.com/kb/TS3125

  • TS3694 What is the cause of "error 1015" when trying to restore and update an iPhone 3gs?

    What is the cause of "error 1015" when you're trying to restore and update an iphone 3gs? My iphone is currently in recovery mode and can not get out of it. All the information about my iphone shown on itunes is only marked as- N/A. How can I get my iphone out of recovery mode and get it to recover and update?
    Thank you,
    MacQuestioner3

    http://support.apple.com/kb/TS3694#error1015, which says:
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
    In other words, either your phone is jailbroken and you are sadly out of luck or you are trying to downgrade iOS.

  • TS3694 keep geting error code 1015 when trying to update my iphone 3gs any tips to sort it out

    keep geting error code 1015 when trying to update my iphone 3gs any tips to sort it out

    https://discussions.apple.com/message/19425288#19425288
    https://discussions.apple.com/message/18882000#18882000
    https://discussions.apple.com/message/18526759#18526759
    http://support.apple.com/kb/TS3694?viewlocale=en_US
    Errors related to downgrading iOS
    The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go toSettings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
    There is not much you can do, sorry 

  • HT201412 I have geting error code 1015 when try to restore to factory seting iphone 3G. any one know how to solve it on PC

    I have geting error code 1015 when try to restore to factory seting iphone 3G. any one know how to solve it on PC

    Your phone was jailbroken.  That's why you're getting this message.  We cannot discuss jailbroken phones here.  You're on your own.

  • Error message when trying to update my world or anyof my applications

    I receive an error message when trying to update any of my applications.  Example  facebook, my world..etc...
    Error 40820 try later

    Hi and Welcome to the Community!
    While normally it is much more accurate to search with the accurate and complete error message, including all punctuation and error codes, in your case here is a KB that discusses that error:
    KB28188"BlackBerry App World is having trouble connecting to the BlackBerry App World server. Verify your network connections and try again. (Error id: 40820) " error is displayed when opening App World on the BlackBerry smartphone
    Hopefully it contains something useful! There also are multiple existing threads on this site that discuss that exact error...your review of those might prove useful, and a search of this site, using the error message, error code, or symptom, should reveal all applicable existing threads to you.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was cancelled

    macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled. 

    I only have 1 apple ID and the same was used to set up this early 2011 macbook pro and iPhoto app. I don't want to loose out on any photos. I tried logging out of app store and back in but no luck. PLEEAASEE HELPP!!!
    This problem has been reported by quite a few forum members, who skipped the update to iPhoto 9.5.1 while running Mavericks. In that case try to purchase iPhoto again instead of updating.
    After making your backup try the following:
    Uninstall iPhoto by deleting it from the applications folder, but do not empty the Trash.
    Launch the App Store, click the "Store" menu, and sign in with your AppleID.
    Open the main page of the App Store and search for iPhoto.
    If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
    If it is not showing as free, there is no help but contacting the App Store Support, as Niel pointed out: http://www.apple.com/support/mac/app-store/contact/

  • Keep getting error 4002 when trying to update Genius

    I haven't seen anyone write about getting error 4002 when trying to update genius in itunes. I select update genius and it gathers information and sends it to the itunes store I assume. And then waits a few seconds and then I get the following message "Genius results can't be updated right now. An unknown error occurred (4002) Please try again later." I've been getting this message for well over a month and I keep hoping they'll be an update or somehow it will magically be fixed, but nothing has changed. Anyone have any insight on this one?
    The current ituned library it 123GB and is stored on external drives. It should also be noted that when I first turned on genius when it was released it went through this whole problem without a hitch. I just can't update Genius with any of the music I've added since then. I can't even get genius to recognize music that I got from the itunes store since I've had the problem.

    Be careful - this was a disaster for me. Once I did this, I got a different error - an error 4010 and in trying to recover, caused a lot of library issues that forced me to go to a backup to fix. You'll find a lot of people having the 4010 problem. Basically iTunes Genius is a disaster and Apple isn't fixing it.

  • I'm getting error messages when I download updates for lightroom and flash for the mac. can't figure out how to trouble shoot.

    I'm getting error messages when I download updates for lightroom and flash for the mac. can't figure out how to trouble shoot.

    It sounds as if your browser and some of your apps are not color-managed.  This is pretty typical.  Even IE9 is only partially color-managed.
    You can expect color-managed and non-color-managed applications to show you different things with the same images.  How different will depend upon how different your monitor color profile is from the image's color profile.
    For web publication and most general use, experts usually advise saving images with the sRGB profile.  If such images, saved through the Save for Web & Devices function, look different to you than you expect, it may be that your input images have previously been saved in another color space.
    You should really try to get your head around color-management by reading more on it.  It can seem baffling and it's difficult to understand without some background.  A quick web search turns up many overviews.  Beware, though, even people writing articles sometimes don't fully understand it.
    -Noel

  • How to correct Runtime error R6034 when attempting to update iTunes on PC?

    How to correct Runtime error R6034 when attempting to update iTunes on PC?

    Hey ievafromsa,
    Thanks for the question. I understand that you are experiencing issues installing iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
    Symptoms may include:
    "The program can't start because MSVCR80.dll is missing from your computer"
    "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
    "Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
    "Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    3. Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    1. Uninstall iTunes and all of its related components.
    2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
    3. Re-download and reinstall iTunes 11.1.4.
    Thanks,
    Matt M.

  • I keep getting Error 17 when trying to update to 7.0.4 iPad Air

    I keep getting Error 17 when trying to update to 7.0.4 and the Ipad stays in USB Mode

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
     Cheers, Tom
    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
    Message was edited by: Texas Mac Man

  • Trojan horse when try to update flash player !?

    this trojan warning( trojan horse crupt.tbj  and trojan horse Pakes_c.BVTU
    ), from AVG ,occurs when try to update flash player,
    the AVG antivirus deletes.
    Problem  started when cannot access IE, Firefox, or chrome....get same error.....”flash player out of date”,
    then  opens download,
    but then when try to download,AVG blocks it
    Not only on Desktop,but also on my iPad, off the same network router.
    Any solutions ,advice?

    joejazz wrote:
    ”flash player out of date”
    Can you post a screenshot of what you see: https://forums.adobe.com/thread/1070933
    Where does that "error" lead you to download?  Anywhere else than an adobe.com or macromedia.com website is not an Adobe update.

Maybe you are looking for

  • Flex Builder 3 - Export Release Build Feature

    Just bought the Flex Builder 3 prof version and imported my project from Flex Builder 2 to 3. All compiled OK and I see all .html wrappers and swf (debug and release versions) in the bin folder. However when I run the "Export Release Build Feature" o

  • Multiple Subject Area - OBIEE 11g

    Hi, I have to do cross-subject area operations in OBIEE 11g. Here is what I have found out: 1. There is an option to use Union/Intersect operations which creates a Union query 2. There is an option to use 'Add/Remove Subject Area' which can be used t

  • One question about pricing and condition in sd.

    Dear all.I have created two material m001 and m002.In the sale order,if the customer buy 10 m001 and 5 m002, I want the price of the 5 m002 will have 60% discount.Some one tell me "you can use the BOM to realize it".But I don't know how to do or whet

  • Function based indexes on CLOB storage

    On a 10gR2 database, with schema-less CLOB storage for an XMLType column: (1) Can a function based index include a wildcard in the namespace ? Or do I need a new function based index for each specific namespace ? (2) I must create a new function base

  • Debug Procedure using JDev10g

    I was using Oracle JDeveloper 10g to debug a pl/sql procedure. I used to do it on different Oracle server and debug works fine. This time, after I let DBA granted the DEBUG connect session and DEBUG any procedure priviledges, I got new problem. I did