Error 102 when updating customer in dispute case

Hi Experts,
When I try to edit a dispute case I am getting following error:
Error 102 during change to record <CustomerNumber> (Customer). Below is the screen shot. Please help.
Thanks and Regards
Pankaj Pareek

Hi Subhrajit,
I went through the earlier also under the thread FSCM Adding Customer-Disputed Objects Error
However, After reading the note I do not found it related to my problem.
Thank you for replying.
Regards
Pankaj Pareek

Similar Messages

Error (102) while updating the software. Solution please?

I'm encountering an error (102) while updating my software to 10.8.4. I need a solution?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Bb 9320 showing error 102 on updating

hi mu phone shows the following errors when i took the event log
verifyHash1 failed for net_rim_bb_medialoader_toolkit_320x240_Armstrong_01-65(4467)
: hash (codfile)0 40 5a e9 59 ff f3 b8 76 ac 1d 28 69 28 a2 ed d5 8b 7b 57 fb
: hash (mod_info)1 41 b4 ca 93 79 eb eb 85 71 ff 2f ed a6 d7 57 5b b3 57 d0 e7
verifyHash256 failed for net_rim_bb_medialoader_toolkit_320x240_Armstrong_01-65(4467)
: hash (codfile)2 94 88 33 2f 84 4b 0a b9 07 83 11 ec 60 60 18 31 0c 54 ee c4 a8 ec 19 82 fd d1 5f d3 dd 2a d1 46
: hash (mod_info)2 88 4a ef f4 af 92 0e cf 4b 00 ac 1e aa b4 35 96 9f 1c 21 fe 1f 20 34 d1 c7 62 9b 01 a4 47 fd 3b
: data&colon;VM:+BORK
: data&colon;JVM Error 102
: data&colon;Invalid code in filesystem
what is the solution for invalid .cod file. i tried updating,resetting to factory settings and all but on rebooting the loader goes midway and restarts with the white screen showing error 102.

Hi rahulharidas88
So your problem is not yet solved ! Have you tried What Krypto suggested on your previous thread ? bb 9320 showing error 102 on updating .
If possible please remain on the same thread rather then creating new , Try this and let us know of your progress :
( Credit JSanders )
1) Make sure you have Blackberry Desktop Manager installed.http://na.blackberry.com/eng/services/desktop/
2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
"c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
3) The Application Loader Wizard will appear -- click "Next."
4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Congrats! Just don't disconnect anything and let the lengthy process finish completely.
NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
Please try it again .
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

I keep recieving error 102 when downloading OS X 10.8.5. what shall I do?

i keep recieving error 102 when downloading OS X 10.8.5. what shall I do?

It appears Apple’s download servers are ‘overwhelmed’ today. I couldn’t download the newest iTunes update or IOS 7 and there are a lot of discussions today about not being able to download. One poster said they had chatted with App Store support who confirmed the problem.

Error 1004 when updating apps

error 1004 when updating apps

i had the same problem, error 1004 when updating apps from iPod. In case this solution doesn't work for you try this one i found in another thread
Go to Settings -> General -> Reset -> Reset All Settings
And confirm. This will not delete your personal data.
After these steps I finally was able to download pending updates.
Hope this Works for you aswell, good luck

Error message when updating Itunes...can not open Itunes program

I am recieving error message when updating Itunes for my computer. The error message reads "MSVCR80.dll is missing and the other error message reads Error 7 (Windows error 126)" I can not open my Itunes. I have reloaded the Itunes onto my computer but still have the same error messages. Please help.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99364)

Did you get error 1067 when updating Reader?

If you got update error 1067 when updating Reader, I'd like to hear more so we can find a solution.
What OS are you using and what version (such as Window XP SP2)?
What version of Reader do you have?
What was the error message you got?
How much disk space do you have available?
How much memory (RAM) is on your system?
I recommend you try installing again using the direct download link noted in this document under "Try a different download link":
http://kb2.adobe.com/cps/836/cpsid_83641.html#main_Try_a_different_download_link
Please let me know if this helps. We haven't been able to reproduce this error.
Thanks so much!

I just worked through this error on my Dad's computer. He has XP Home SP 3, Adobe Acrobat 4 and Reader 9.4.7 were already installed. He has been getting to 1067 error for some time and just clicking through it. I manually un-installed Acrobat 4, but left the shared files in web/common alone. I did not touch Reader 9.4.7. I downloaded the alternate installer for Adobe 10.1.2 for English and ran it. It did complain, eventually, about 9.4.7 still having a file in use, but I'd left the previous dialog from the 9.4.7 updater failure open. I closed that 9.4.7 failure dialog and hit 'retry', and the installer proceeded onward and seems to have completed successfully.
This machine has 1 gig of RAM and approx 4G of free disk space on C:.

Error 1321 when updating Adobe Acrobat Pro even if profile has admin rights and parent folder has full access privileges.

Error 1321 when updating Adobe Acrobat Pro even if profile has admin rights and parent folder has full access privileges.
Exact error below:
error 1321: the installer has insufficient privileges to modify the file C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Xtras\AdobePDF\I386\[dll file]
Thanks in advance!

My first thought is to not just apply permissions to the folder but be sure to apply them to all objects inside them. It would be interesting to see if you can rename this file, then rename it back to its original name; this would test permissions nondestructively.

Error 4 when updating the text data

When i am trying to load the data using IP i am facing the issue Error 4 when updating the text data.Please suggest me
Edited by: srikanth reddy612 on Dec 15, 2011 12:45 PM

hi srikanth,
you might have selected given lowercase data
and please check in the Infoobject the lowercase Checkbox is unchecked then it will allow you to update from IP.
also check in the Datasource fields tab whether particular field is unchecked with lowercase.
if checked all records you are pushing will have to be in uppercase.
thanks
Sankaresh S

I am getting an un expected error message when updating the setting to "extend network". Is there an obvious setting I may be missing? Cisco router being used.

I am getting an un expected error message when updating the setting to "extend network". Is there an obvious setting I may be missing? Cisco router being used.

If you are trying to "extend" using wireless only, you may not be aware that Apple designed the "extend" feature as a proprietary setting to only work with other Apple routers.
It is extremely unlikely that this will work with a Cisco router.
If your plans call for connecting the AirPort Express to the Cisco router using a wired Ethernet connection, it should be possible to configure the Express that way.

HT1766 error 8000067 when updating version 5.1 on ipad1..what to do?

Error 8000067 when updating version 5.1 on Ipad. please help to avaoid to loose everything. thanks and regards

iOS: Unknown error containing '0xE' when connecting to a Windows PC
http://support.apple.com/kb/TS3221
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

Upgraded to 10.3.1.55, now can't set iT as default player,"An error occurred when updating the default player for audio files types. You do not have enough access privileges for this operation." How to fix?

After I upgraded iTunes, iTunes doesn't recognize CD in the drive, apparently isn't the default player. It won't let me set iTunes as the default player, I get the error message "An error occurred when updating the default player for audio files types." I tried Whitesides' remedy (changing Read Only status in folder in Windows) but it didn't solve the problem. Any suggestions? Thanks.
J

Oddly enough. I think I just solved it. It looks like, for some reason, my computer has about 8 different "iTunes music" folders, and I've been saving my music to the wrong one. Neat. Music now imports and plays as it should. Copying things over is going to be so fun tonight!

I recieved an error message when updating to itunes version 11.1.3.8. Says itunes has attempted to load C runtime library incorrectly. Version 11.1.3.8 works. How do I correct?

I recieved an error message when updating to itunes version 11.1.3.8. Says itunes has attempted to load C runtime library incorrectly. Version 11.1.3.8 works. How do I correct?

Hi there MRDLS,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
-Griff W.

[SOLVED] Strange error message when updating Pacman

I get a following error message when updating pacman and doing system upgrades:
[mike@goat ~]$ sudo pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
resolving dependencies...
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
looking for inter-conflicts...
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
I tried running pacman -Syyu, but that did not seem to solve the problem. There is /var/lib/pacman/local/openssl-0.9.8l-1/
directory but it is empty. When running pacman -S openssl, I get the above error message as well but it spans for hundreds of buffer lines. In the end I end up with this:
openssl: /usr/share/man/man3/ssl.3.gz exists in filesystem
openssl: /usr/share/man/man3/ui.3.gz exists in filesystem
openssl: /usr/share/man/man3/ui_compat.3.gz exists in filesystem
openssl: /usr/share/man/man3/x509.3.gz exists in filesystem
openssl: /usr/share/man/man5/config.5.gz exists in filesystem
openssl: /usr/share/man/man5/x509v3_config.5.gz exists in filesystem
openssl: /usr/share/man/man7/des_modes.7.gz exists in filesystem
Errors occurred, no packages were upgraded.
[mike@goat ~]$
Anybody have any insight?
Thanks,
maschinetheist
Last edited by maschinetheist (2010-03-02 17:18:42)

Bregol wrote:
Sounds to me like openssl is installed on your system but the info on it is now missing from the local pacman database (/var/lib/pacman/local). In other words, pacman forgot that you installed it. So in your second clip of code, pacman is complaining that files belonging to openssl exist in your filesystem, since you do have it installed but it no longer knows that.
Don't know if this is the proper way to fix it, but I imagine forcing a reinstall of openssl (pacman -Sf openssl) should get pacman to reinstall openssl so that it knows it is installed.
Bregol,
pacman -Sf openssl
seemed to have fixed it. Did not know of the force reinstall option. The necessary directories in /var/lib/pacman/local/openssl have been created.
Thanks,

Error 1602 when updating Iphone 4 from 4.3 to 5.. Any help ?

Error 1602 when updating Iphone 4 from 4.3 to 5 and after that it goes into "recovery mode" but Its not recognized by Itunes, I can only exit it with Tinyumrella and nothing else.

It seems that the itunes program has some interfefence when contacting the apple server.
i had this problem gave me error message 3200, i turned off the anti virus after restarting the computer(windows vista) and restarting the phone.
Turned off the sidebar, and closed any programs in the notifications section such as nokia ovi etc which load up when the computer starts also skype.
ha presto it began the process of transfering the file to the iphone4 and has now fully updated
hope that helps
leon

Error 102 when updating customer in dispute case

Similar Messages

Maybe you are looking for