Error 103:103 - Abode Reader 10.1.1 & IE 9
Only two ways I found around this issue when opening Pdf's in IE 9,
select "save target to a file"; probably the safest method - one that allows you to view it at your pleasure,
or disable the the protected mode by opening Adobe Reader, Edit Preferences, General tab, "uncheck" enable protected mode at start up, close Reader, restart Reader
Only two methods I found that allows me to view Pdf's when using IE 9 under Vista - oh yes - if i can't get it to work under Vista, nothing else gets it! I rather have one "screwed up"
than a bunch of them. If anyone else has other ideas to get around the error 103:103 code or perhaps the correct way to resolve it, go for it! At least this works until the next update!
Good luck!
You must contact the support team.
Similar Messages
-
Adobe Acrobat Reader error code (103:103)
I cannot open online PDF files as I keep getting error code (103:103) then asks me to exit and try again.
The etc etc refers to the usual standard message as follows - also re Acrobat I was merely repeating the message given.
'there is a problem with Adobe Acrobat Reader. If it is running exit and try again (103:103)' this was the exact message given. I had version 11.0.08 which I have now deleted and am using an earlier version 10.0.4 which seems to have resolved the problem for the time being -
Error code 103:103 in Adobe Reader XI
What does Error Code 103:103 mean in Adobe Reader XI?
I just started having this same problem. Details below.
Need help in resolving newly discovered problem wherein all of sudden I can no longer open and display pdf files within IE and but end up with a blank screen [shows blue loading gauge 55.8kb/55.8kb for example doc] unless I down load the pdf file and then open it using Reader XI ver 11.0.2 [Plug-Ins 11.0.01.36] which opens the files just fine. Eventual Error Msg = “There is a problem with Adobe Acrobat/Reader. If it is running, please exit and try attain (103:103)”. Reader Protected Mode: Reader cannot open in Protected Mode due to an incompatibility with you system config. Etc... “Do not open with Protected Mode disabled” is pre selected.
IE = ver 8.0.6001.18702). Windows XP = ver 5.1 SP3.
Reader XI ver 11.0.2 [Plug-Ins 11.0.01.36]
Reader XI Check for Updates shows: No Updates Available
Example of failing doc = http://www.us-cert.gov/reading_room/emailscams_0905.pdf -
Using Adobe Reader XI, I am unable to view pdf downloaded from my secure internet sites. I get the error message 103;103
It worked! Thank you very much.
Sent from my iPad -
I am using Adobe Reader 10.1 and Windows 7. I keep getting an error message "103:103." What is this indicate and how do I correct it?
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
WHAT DOES ERROR CODE 103:103 MEAN IN ADOBE READER
WHAT DOES 103:103 ERROR CODE MEAN IN ADOBE READER I HAVE WINDOWS XP AND IE 8
Try if this solution helps: http://www.brain-cluster.com/adobe-2/acrobat-reader/there-problem-adobe-acrobatreader-if-i t-running-please-exit-and-try-again/
-
There is a problem with Adobe Acrobat Reader etc etc error code 103?? Help Please
Adobe Acrobat Reader issue as above - downloaded latest version again still issues. I am using an old Acer laptop with Windows XP which I only now use for printing
The etc etc refers to the usual standard message as follows - also re Acrobat I was merely repeating the message given.
'there is a problem with Adobe Acrobat Reader. If it is running exit and try again (103:103)' this was the exact message given. I had version 11.0.08 which I have now deleted and am using an earlier version 10.0.4 which seems to have resolved the problem for the time being -
SAP ECC error:'Migration Monitor' exits with error code 103.
Hi All,
I am doing SAP ECC installation for windows 32 bit with MAXDB as backend.
I am stuck at the import ABAP.Getting error
ERROR 2008-08-08 16:10:53
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
1) imort_monitor.java.log-->contains
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
Import Monitor jobs: running 1, waiting 0, completed 18, failed 0, total 19.
Loading of 'SAPVIEW' import package: ERROR
Import Monitor jobs: running 0, waiting 0, completed 18, failed 1, total 19.
2)import_monitor.log
ERROR: 2008-08-08 16:10:36 com.sap.inst.migmon.LoadTask run
Loading of 'SAPVIEW' import package is interrupted with R3load error.
Process 'D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -nolog -c 0' exited with return code 2.
For mode details see 'SAPVIEW.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
INFO: 2008-08-08 16:10:52
All import packages are processed.
WARNING: 2008-08-08 16:10:52
1 error(s) during processing of packages.
INFO: 2008-08-08 16:10:52
Import Monitor is stopped.
3)SAPVIEW.log
error message returned by DbSl:
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
(CREATE VIEW "Z_T_CO_BW" ( "KOKRS" , "KOSTL" , "VERSN" , "KSTAR" , "WOG001" , "MEG001" ) AS SELECT T0002."KOKRS", T0002."KOSTL", T0001."VERSN", T0001."KSTAR", T0001."WOG001", T0001."MEG001" FROM "COSS" T0001, "CSKS" T0002 WHERE T0002."MANDT" = T0001."MANDT")
DbSlExecute: rc = 103
(SQL error -942)
error message returned by DbSl:
(DB) INFO: disconnected from DB
D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: job finished with 3108 error(s)
D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20080808174211
Only SAPDB: SAPSID srvice of SAP DB is only up.
No other services of database are up.And i am not able to up the other services also.
Is it required to up the other services?
If not?
Why this error is occuring?
Any help will be appreciated.
Thanks&Regards
Manisha dasHello Manisha,
The one of the possible reasons for this is due to lack of H/W.
Increase your RAM size to atleast 2GB and utilise the same while you are installing ECC in database parameters step..
If the issue is with H/W, then this should fix the issue.
Hope it helps,
Regards,
Satish. -
Every time I try to install an update for iTunes 11.0.2, I get an error message 103. Has anyone else had this problem and found a way to fix this?
I did it the .dmg way alone and has problems with itunes crashing. This is a better way to ensure that there is not anything left behind to cause issues.
You need to backup your computer then uninstall I-tunes and reinstall itunes.
Delete iTunes
Deleting iTunes is not recommended unless you know what you’re doing.
Launch Terminal from the UTILITIES within Applications
Type the following commands:
cd /Applications/
This brings you into the Applications directory, the next command deletes iTunes itself:
sudo rm -rf iTunes.app/
Enter the Administrator password to confirm
There is no warning or confirmation other than entering the admin password, iTunes will immediately be deleted, effectively uninstalling it from the Mac.
Deleting the iTunes application will NOT delete the ITUNES or music, and any purchases bought through iTunes will still remain tied to the Apple ID used to originally buy them.
You can download the newest version from Apple, and running their installer will bring iTunes back to life on your computer.
http://www.apple.com/itunes/download/ -
Hi all,
I'm trying to publish for first time to a new environment (delivery).
The light of target destination is green.
When i click on "inicialize" i get these errors and in the docs i cannot find why or what i have to do.
Trying to publish asset types during inicialization it returns this error:
No response from remote execute trying to save assettype [error was -103].
Looking for the meaning for this i found: No table. What does it mean? Why the tool has not created the table?
And then, the next error message is shown (all of them are shown in the same screenshot) trying to mirroring. It might have to do with the previos error message... but i have no idea!
-12011. No response from remote execute trying to save assettype [error was -103]
sites.log in delivery environment says as follows
[2014-01-24 12:13:52,496 CET] [ERROR] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.db] SQLException loading table definition for SiteCatalog with state HY000: [FMWGEN][SQLServer JDBC Driver]Object has been closed.
java.sql.SQLException: [FMWGEN][SQLServer JDBC Driver]Object has been closed.
[2014-01-24 12:13:52,527 CET] [ERROR] [.kernel.Default (self-tuning)'] [com.fatwire.logging.cs] ContentServer exception running CS recursively
COM.FutureTense.Common.ContentServerException: pagename not supplied Error code:BAD PARAMETER
[2014-01-24 12:13:52,543 CET] [ERROR] [.kernel.Default (self-tuning)'] [logging.cs.satellite.request] Error accessing the external page with pmd: page: ?Browser=Unknown Browser&SystemAssetsRoot=/dlv/futuretense_cs/&errdetail=0&errno=0&null= &pagename=fatwire/wem/sso/casInfo
[2014-01-24 12:13:52,543 CET] [ERROR] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.request] COM.FutureTense.Common.ContentServerException: ContentServerException: (Reading page page: ?Browser=Unknown Browser&SystemAssetsRoot=/dlv/futuretense_cs/&errdetail=0&errno=0&null= &pagename=fatwire/wem/sso/casInfo from co-resident Content Server failed (errno=0).) Error code:GENERIC SERVER ERROR
[2014-01-24 12:14:06,021 CET] [ERROR] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.db] SQLException loading table definition for SystemInfo with state HY000: [FMWGEN][SQLServer JDBC Driver]Object has been closed.
java.sql.SQLException: [FMWGEN][SQLServer JDBC Driver]Object has been closed.
Does anybody know how to help here?
Thank you very much.
GalaWhat SQL server driver are you using, Microsoft's or the jTDS driver (see jTDS JDBC Driver)? It may be worth trying the other.
Also, can you enable
com.fatwire.logging.cs=DEBUG
in log4j.properties and retest, then post the entire resulting sites.log and application server log somewhere for us to see? e.g somewhere like pastebin.com
Phil -
How do I fix adobe error (103:103)
how do I fix adobe error (103:103)
Hi Tonni16,
Are you getting the error with any PDF that you open in IE, or just a certain type of PDF? You can you please try the following and let me know if you're seeing the error?
1. Launch Reader;
2. Choose Edit > Preferences > Security (Enhanced) > uncheck "Enable Protected Mode at startup";
3. Click on "OK" button;
4. Exit Reader;
5. Launch IE and open the PDF file.
If the above steps do not resolve the issue, please uninstall Adobe Reader using Adobe's Cleaner Tool. The tool is available at the following link:-
http://labs.adobe.com/downloads/acrobatcleaner.html
then please re-install Adobe Reader using the full installer from the link mentioned below:
http://get.adobe.com/reader/enterprise/
In case, you still experience the same issue, then please provide the following information:
1. What is the Operating Systems installed?
2. What is the version of Adobe Reader installed on your system?
3. Is Adobe Acrobat installed on your system as well?
4. Which browser is used to view the PDFs? -
Error Message (103.103)
Hi,
I have Windows 7 OS running on my computer and installed Adobe Reader XI recently. I have been getting error messages that read Adobe PDF Document There is a problem with Adobe/Acrobat Reader. If it is running, please exit and try again (103.103). Can you please help with this? I am not able to download and print a certificate because of this error message. I would so appreciate any help you might give me in this matter.
Thank you for your prompt reply to this communication.
Corie MooneyLauch Adobe Reader X (run the program itself outside of the Internet Explorer)
From the menu, choose Edit -> preferences -> General
Uncheck the option for "Enable Protected Mode at startup"
Restart the Adobe Reader and web browser. -
Error 103:103, can not open/download/view pdf files online
when i try to view/download/open any pdf document online following error window shows, please help what to do
Adobe PDF Document
There is a problem with Adobe Acrobat/Reader.
If it is running, please exit and try again. (103:103)
OKOS - vista home basic - service pack 1
ADOBE READER VERSION - latest as i uninstalled previous and re downloaded new 10.1.4 (problem still persisting and same)
YES - adobe acrobat is installed on my computer
YES - for reapirs i uninstalled and then reinstalled still problem there.
my system is a 32 bit system , i hope that is not the reason for problem.
thank you -
If Can, Please Help!
I received the following System Error while trying to update Adobe Reader 8:
Operating System Errror: Error (16291.103.506-73172312.80040154.FFFFFFFF.80040154
I'm running Home Vista PremiumHave no clue. However, this is not the Reader forum either. It may be that you do not have permission to do the update (probably need to be the administrator) or you have anti-virus running. If it is really an OS error, then maybe the question needs to be asked in a MS forum.
-
Hi,
Since installing new certificates we are getting the following error on license requests:
Error Code = 3328 [ServerErrorTryAgain] Sub Error Code = 103
The License Server Logs contain this detail:
Error parsing request
com.adobe.flashaccess.sdk.protocol.HandlerParsingException: java.lang.IllegalArgumentException: Invalid padding (Error Code: 103): Cannot parse request
at com.adobe.flashaccess.sdk.protocol.AbstractHandler.parseRequest(AbstractHandler.java:82)
Could you give me any ideas what could cause this error or any pointers to debug further?
Thanks,
MarkThis was resolved. The issue was due to attributes missing on the public and private keys generated on the HSM.
Maybe you are looking for
-
iTunes: my husband and I have two separate iTunes libaries and would like to combine them. I have tried homesharing but as my laptop is not an Apple I can't seem to find advice online with Apple. Can anyone help.
-
I've problem with Game Center . I can't sign in Game Center on my iPad . I tap on the Game Center icon but the page is blank. I tried go to setting, my Apple ID appear but the page keep on loading and nothing pop up. How to resolve this issue?
-
Entry Sheet Printout only after Release
Hi all, I wanna know if its possible to configure that an Entry Sheet could only be printed after released? If so, how could this be made? Regards. Gregory. Edited by: Gregory Mayorga on May 28, 2010 4:21 PM
-
Am I imagining things? Spotlight on Word docs...
If I search for files modified in the last 7 days and select Kind is Document, it seems that Word 2008 .docs do not appear! .docx ones do, though! Yet, if I select Extension is doc instead, then I get the Word .doc files. Is there some trick here?
-
Files losing "Tape Name" Metadata
I add metadata to the "tape name" schema in Premiere Pro and make sure the link is checked in the metadata display so that the info is added to the media, which works fine for all other schema except the Tape Name schema. When I import the media int