Error 103 pls help me

i am sorry for last post that i wrote i was desperate and wait for the solution for more than 3 days and no one answer me
I have worked on this program since more than 3 months and I had to buy a Mac, and now this problem face me has already felt very angry
And content of the Internet to program flash in my language is very pink
i am sorry again
now i face this problem pls help me

pls help me

Similar Messages

Again same problem error 0xE8000003 pls help again i don't know it keep doing that

Again same problem error 0xE8000003 pls help again i don't know it keep doing that please help with that

Hello sartip fatah,
The following article provides further information regarding this error, and steps to help resolve it.
iOS: Unknown error containing '0xE' when connecting to a Windows PC
http://support.apple.com/kb/TS3221
Cheers,
Allen

HT5052 when ever i download an update i.e,iOS 5.0.1 Software Update it shows an error so pls help me or guide through it.....

when ever i download an update i.e,iOS 5.0.1 Software Update it shows an error so pls help me or guide through it.....the error shown is-3676 timed out

Most likely computer Anti-Virus and or computer Fire-Wall is interferring with the download of the Firmware. Turn them OFF, so your computer can download the Firmware.

My songs dont download properly when it comes up it shaded in grey and it says error anyone pls help, My songs dont download properly when it comes up it shaded in grey and it says error anyone pls help

My songs dont download properly when it comes up it shaded in grey and it says error anyone pls help, My songs dont download properly when it comes up it shaded in grey and it says error anyone pls help
Im on ipod 6.1.3 non jaillbroken
and i have not bought songs from itunes store

What is the wording of the error message?
When you say download do yo mean:
- directly downloading from iTunes?
- Syncing to computer?

I remove CTIOS 8 in window 8.1, and install CTIOS 9.0 but i am trying to login new one they given the error. Pls help

I remove CTIOS 8 in window 8.1, and install CTIOS 9.0 but i am trying to login they given the error. Pls help

This may help, it allows you to reset the application, it also may be worth clearing out the app store cache and temp files.
http://www.ryanragle.com/index.php?/site/comments/where-does-the-mac-app-store-d ownload-temp-files-to
To contact Apple use the feedback form, this is a user forum and I don't think they will respond here.
regards

Function error! pls help.

Here is the code:
CREATE OR REPLACE FUNCTION id_is_good
(i_student_id IN NUMBER)
RETURN BOOLEAN
AS
v_id_cnt NUMBER;
BEGIN
SELECT COUNT(*)
INTO v_id_cnt
FROM student
WHERE student_id = i_student_id;
RETURN 1 = v_id_cnt;
EXCEPTION
WHEN OTHERS
THEN
RETURN FALSE;
END id_is_good;
Error report:
ORA-06550: line 5, column 20:
PL/SQL: ORA-00904: "I_STUDENT_ID": invalid identifier
ORA-06550: line 2, column 1:
PL/SQL: SQL Statement ignored
ORA-06550: line 6, column 1:
PLS-00372: In a procedure, RETURN statement cannot contain an expression
ORA-06550: line 6, column 1:
PL/SQL: Statement ignored
ORA-06550: line 10, column 1:
PLS-00372: In a procedure, RETURN statement cannot contain an expression
ORA-06550: line 10, column 1:
PL/SQL: Statement ignored
06550. 00000 - "line %s, column %s:\n%s"
*Cause:    Usually a PL/SQL compilation error.
*Action:
This function run troubleless however it can not run troubleless in my computer, I have database though, I mean my database is ok, and i use sql developer but i dont understand why this code cant run good?? pls help me.
thanks

RETURN BOOLEANPerhaps you should read Oracle Doc about returning boolean value in SQL.
Check the following link ->
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::NO::P11_QUESTION_ID:6263249199595
Your solution might be something like this if you want to return boolean ->
CREATE OR REPLACE FUNCTION id_is_good(i_student_id IN NUMBER)
RETURN BOOLEAN
IS
v_id_cnt NUMBER;
BEGIN
SELECT COUNT(*)
INTO v_id_cnt
FROM student
WHERE student_id = i_student_id;
IF v_id_cnt > 0 THEN
     RETURN TRUE;
ELSE
    RETURN FALSE;
END IF;
EXCEPTION
WHEN OTHERS THEN
RETURN FALSE;
END id_is_good;Or, if you want to return the value then ->
CREATE OR REPLACE FUNCTION id_is_good(i_student_id IN NUMBER)
RETURN NUMBER
IS
v_id_cnt NUMBER;
BEGIN
SELECT COUNT(*)
INTO v_id_cnt
FROM student
WHERE student_id = i_student_id;
RETURN v_id_cnt;
EXCEPTION
WHEN OTHERS THEN
RETURN 0;
END id_is_good;Hope this will help.
Regards.
Satyaki De.

Sync Message Error. Pls help very urgent.

Hi,
When I ma sending sync messages in XI I am getting error
<SAP:Code area="PERSIST">MSG_NOT_FOUND</SAP:Code>
<SAP:P1>4871E583B6C24C3CE1000000AC140A3B</SAP:P1>
<SAP:P2>PE_ADAPTER</SAP:P2>
Pls help.

Http sender and Http Receiver so no adapter is used..

"Exception in thread "main" java.lang.NumberFormatException"error..pls help

Hi,
I'm trying to run a program I've written but keeping getting this error:
Exception in thread "main" java.lang.NumberFormatException: empty String
at sun.misc.FloatingDecimal.readJavaFormatString(FloatingDecimal.java:994)
at java.lang.Double.parseDouble(Double.java:482)
at data.newLineToRead(data.java:21)
at data.data(data.java:34)
at train.main(train.java:86)
I'm not quite sure where I'm going wrong.I've included the data class and train class.Could someone pls help me.
Thanks a lot.
Data Class:
import java.io.*;
import java.util.*;
public class data{
        private static parameter par;
        private static double[][] x=new double[par.n()][par.D()];
        public static double[] t=new double[par.n()];
        public static void newLineToRead(String LineToRead,int n){
        int d=0;
        String stringToRead=new String();
                for(int i=0;i<=LineToRead.length();i++){
                        StringTokenizer str = new StringTokenizer (stringToRead,"/t");
                        String[] strtemp = new String[str.countTokens()];
                                while (str.hasMoreTokens()){
                                x[n][d++] = Double.parseDouble(str.nextToken());
                                d++;
                                System.out.println(x[n][d++]);
                        stringToRead=new String();
                t[n]=Double.parseDouble(stringToRead);
                x[n][par.d()]=1.0;
        public static void data() throws IOException{
        DataInputStream in=null;
                try{
                        in=new DataInputStream(new FileInputStream(par.f()));
                        for(int n=0;n<par.n();n++){
                        String LineToRead=in.readLine();
                                if(LineToRead.length()==0){
                                        System.out.println("Remove empty lines");
                                else{
                                        newLineToRead(LineToRead,n);
                }finally{if(in!=null){in.close();}}
        public static double x(int n,int d){return x[n][d];}
        public static double t(int n){return t[n];}
}Train Class
import java.io.*;
import java.util.*;
public class train{
         private static parameter       par;
         private static data            dat;
         private static model           mod;
         private static response        resp;
         private static void error(String msg){
                System.out.println(msg);
                System.exit(1);
         private static void check(){
            if(par.f().length()==0)
                error("No filename of input vectors!");
            if(par.n()==0)
                error("No number of input vectors!");
            if(par.d()==0)
                error("No number of input variables!");
            if(par.d()>par.D())
                error("Dimension is larger than 100!");
          private static void usage(){
            System.out.println("Non-default parameters==========================");
            System.out.println("-f filename of input vectors");
            System.out.println("-n number of input vectors");
            System.out.println("-d number of input variables");
            System.out.println("Default parameters==========================");
            System.out.println("-R regularisation constant (must be positive and the default value is 0.0)");
            System.out.println("-S epsilon criterion for stopping a learning process (default value is 0.001)");
            System.out.println("-C maximum learning cycle (default value is 10000)");
                  public static void main(String[] argv){
                        if(argv.length==0){
                                System.out.println("Command line is <Java [-cp path] train parameters>");
                                usage();
                                System.exit(1);
                        if(argv.length==1 && argv[0].equals("help")==true){
                                usage();
                                System.exit(1);
                        par.nin(0); par.din(0); par.Rin(0.0); par.Cin(10000); par.Sin(0.001);
for(int i=0;i<argv.length;i++){
                                        if(argv.equals("-f")==true){
if((i+1)==argv.length)
error("miss the para");
par.fin(argv[i+1]);
i++;
else if(argv[i].equals("-d")==true){
if((i+1)==argv.length)
error("miss the para");
par.din(Integer.parseInt(argv[i+1]));
i++;
else if(argv[i].equals("-n")==true){
if((i+1)==argv.length)
error("miss the para");
par.nin(Integer.parseInt(argv[i+1]));
i++;
else if(argv[i].equals("-S")==true){
if((i+1)==argv.length)
error("miss the para");
par.Sin(Integer.parseInt(argv[i+1]));
i++;
else if(argv[i].equals("-C")==true){
if((i+1)==argv.length)
error("miss the para");
par.Cin(Integer.parseInt(argv[i+1]));
i++;
else if(argv[i].equals("-R")==true){
if((i+1)==argv.length)
error("miss the para");
par.Rin(Double.parseDouble(argv[i+1]));
i++;
else error("Unkown token");
check();
try {
dat.data();
}catch(IOException e) { System.err.println(e.toString()); }
try {
mod.model();
}catch(IOException e) { System.err.println(e.toString()); }
try {
resp.record();
}catch(IOException e){ System.err.println(e.toString()); }

String stringToRead=new String();
                for(int i=0;i<=LineToRead.length();i++){
                        StringTokenizer str = new StringTokenizer (stringToRead,"/t");
                        String[] strtemp = new String[str.countTokens()];
                                while (str.hasMoreTokens()){
                                x[n][d++] = Double.parseDouble(str.nextToken());
                                d++;
                                System.out.println(x[n][d++]);
                        stringToRead=new String();
                t[n]=Double.parseDouble(stringToRead);
                x[n][par.d()]=1.0;
        }Not sure exactly what you are trying to do above but...
You are setting your String to an empty String with "new String()" and then parsing that empty String. Eventually, you are trying to parse a double from that empty String:
t[n]=Double.parseDouble(stringToRead);Also, I cannot think of a reason to ever use "new String()" when you could just use:
String myString = "";

Error -69, pls help..

pls help me.. everytime i try to sync my iphone to update or upgrade to 4.3.1, it appears "The iphone cannot be synced. An unknown error occured (-69)." what do you mean by that? what should i do? it's been a month or two that i can't sync my iphone. pls pls help.. thanks.

See this support document from Apple... http://support.apple.com/kb/ht1210

The ipod can`t be restored. error 1415 pls help

in itunes my ipod isn`t shown.. i tried the reset utility, and sais that an error ocurred. after that itunes pop`s up and want`s to reset the ipod. i hit reset and after a couple of seconds it shows me the " the ipod could not be restored. an error occurred (1415) " What can i do in thes situation.??? pls help me anyone.. e-mail at: [email protected]
AMD Windows XP Pro

http://docs.info.apple.com/article.html?artnum=304508

HT4623 Unable to update. Error. Pls help.

Unable to check for update. This message prompted when updating. Pls help. How to go about it.

Are u going reply anytime soon. I need to solve this ASAP. I'm at wifi area....

JAAS with TomCat 5.5 Unable to login.No error shown.PLS HELP ME:(

Log of tomcat:
Sep 28, 2006 3:21:49 PM org.apache.catalina.core.AprLifecycleListener lifecycleEvent
INFO: The Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path: C:\Program Files\Apache Software Foundation\Tomcat 5.5\bin;.;C:\WINNT\system32;C:\WINNT;C:\WINNT\system32;C:\WINNT;C:\WINNT\system32\WBEM;C:\j2sdk1.4.2\bin;c:\mysql\bin;C:\apache-ant-1.6.5\bin;C:\Program Files\QuickTime\QTSystem\;C:\eclipse_ac\bin
Sep 28, 2006 3:21:49 PM org.apache.coyote.http11.Http11BaseProtocol init
INFO: Initializing Coyote HTTP/1.1 on http-8080
Sep 28, 2006 3:21:49 PM org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 2547 ms
Sep 28, 2006 3:21:50 PM org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
Sep 28, 2006 3:21:50 PM org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/5.5.17
Sep 28, 2006 3:21:50 PM org.apache.catalina.core.StandardHost start
INFO: XML validation disabled
Sep 28, 2006 3:21:54 PM org.apache.catalina.startup.HostConfig deployWAR
INFO: Deploying web application archive jaasLogin.war
Sep 28, 2006 3:21:57 PM org.apache.struts.tiles.TilesPlugin initDefinitionsFactory
INFO: Tiles definition factory loaded for module ''.
Sep 28, 2006 3:21:57 PM org.apache.struts.validator.ValidatorPlugIn initResources
INFO: Loading validation rules file from '/WEB-INF/validator-rules.xml'
Sep 28, 2006 3:21:57 PM org.apache.struts.validator.ValidatorPlugIn initResources
INFO: Loading validation rules file from '/WEB-INF/validation.xml'
Sep 28, 2006 3:21:58 PM org.apache.coyote.http11.Http11BaseProtocol start
INFO: Starting Coyote HTTP/1.1 on http-8080
Sep 28, 2006 3:21:59 PM org.apache.jk.common.ChannelSocket init
INFO: JK: ajp13 listening on /0.0.0.0:8009
Sep 28, 2006 3:21:59 PM org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=0/109 config=null
Sep 28, 2006 3:21:59 PM org.apache.catalina.storeconfig.StoreLoader load
INFO: Find registry server-registry.xml at classpath resource
Sep 28, 2006 3:22:00 PM org.apache.catalina.startup.Catalina start
INFO: Server startup in 10312 ms
===========================================================
Notice that line i bolded and italic..Does it means that my loginModule is not loaded?how to i configure my login.config so that it will call the module or whatsoever?because it my loginModule is not being called.any solutions to configure JAAS?pls help me..im new to this..=))) i wrote my login.conf and put in the /conf folder of tomcat..what else must i do?=)))

Sorry, I am not sure about that.
Also, I don't see a particular line that was bolded in your original post.
The way I ensured that my LoginModule was being called (aside from the fact that I was able to login) was debugging it in Eclipse and placing a breakpoint in the LoginModule code.
You could try putting a System.out.println() statement in it to see if it is called.

Mail for Exchange - Error 401 - Pls help

Hi,
I am witnessing thsi problem when i try to Sync. It was working fine before but it has started giveing me problem after my upgrade to version 2.07.
The log is,
16/02/2009 10:59:46 Mail for Exch. Build : 2.07.000
16/02/2009 10:59:46 Device Software Version: 100.07.76
08-06
16/02/2009 10:59:46 Device Model: E71
16/02/2009 10:59:46 Serial Number: 354855022616048
16/02/2009 10:59:45 PeakTime active
16/02/2009 10:59:46 PeakTime active
16/02/2009 10:59:46 Setting OFFLINE Status to False
16/02/2009 10:59:46 Setting ROAMING status to False
16/02/2009 10:59:46 Setting DISK FULL status to False
16/02/2009 10:59:59 HTTP error code=401
16/02/2009 10:59:59 HTTP Server Error 401: UnAuthorized
16/02/2009 11:16:43 PeakTime active
16/02/2009 11:16:43 PeakTime active
16/02/2009 11:16:43 Setting OFFLINE Status to False
16/02/2009 11:16:43 Setting ROAMING status to False
16/02/2009 11:16:43 Setting DISK FULL status to False
Can somebody pls respond and let me know how to fix this?
Timely help is appreciated.
Regards,
Gary

Hi
My E70 has just started to behave in the same way - one day it was working, then it stopped and hasn't worked since. The following is an extract from the log:
07/02/2008 15:12:16 start Email sync
07/02/2008 15:12:17 failed to decode server response
07/02/2008 15:12:17 client->server adds=0 changes=0 deletes=0 fails=0
07/02/2008 15:12:17 server->client adds=0 changes=0 deletes=0 fails=0
07/02/2008 15:12:17 end Email sync
07/02/2008 15:12:17 KEASErrSvrSyncFailed - Unable to Process Sync Response.
Others in my company with E70's are not havng a problem. I have re-loaded the FW and M4E, but it still fails to sync e:mail.
Any ideas?

Error faced, pls help

I was implementing database into the application using mysql. At first i did it on a simple.java and run it. It works well. As a matter of fact, it works perfectly fine. But when i convert it into jaxrpc, copying the relevant codes into the helloImpl file, when i type the command to compile the server, the build was successful, but when i type the command to xrpcc the server, there is an error.
" error: exception "java.sql.SQLException" is unsupported. "
what is the cause of this error? I have imported java.sql, but why it is still not supported? is there anything to do wif .jar files that i need to set?
can anyone out there help me...ant setpath thingys need to be set? pls tell me...Urgent...

This might help. One of the problems with WSDP, to this point, and to my knowledge, is that you can't transmit regular Exception object across the wire. They have to be JAXRPC compatible object as defined in the JAXRPC specification. When it says that java.sql.SQLException" is unsupported, it is telling you that it can't send a SQLException back to your client if it happened. Some sql exception was thrown in your code somewhere and it can be through as a part of the return soap document. You can do a couple things to remedy this. You could write your own exception object that would encapsulate the sqlexecption's root cause, in the form of a string, make sure it complies with the specification for JAXRPC objects, and then catch the SQLException in server-side coad, and when you catch it, throw a new MyCustomSqlExcpetion (or whatever) object back to your client. That way your client still knows that a sql exception occured on the server, though it doesn't catch an actual SQLException object. The other way is to through a RemoteException (which is supported by JAXRPC) whenever a SQLException occurs on your server. Again, you would catch the SQLException, then throw a new RemoteException. So, the reason is that you can't send a SQLException across the "wire." Let me know if you have more problems.
Cheers,
Nick
www.mindoveradversity.com

SXI_Cache Error. Pls help

When I use sxi_cache
SXI_Cache shows "Unable to refresh cache contents" and "error during last attempt to refresth cache".
When I click on error it shows
Error when reading HTTP destination: INTEGRATION_DIRECTORY_HMI.
The same error I am getting in sxmb_moni
Pls advice

Hi Rick,
Refer Sap note: 1030255.It will solve your problem.
Symptom:
The runtime cache for the integration server (ABAP) is not automatically updated after you activate a change list. The traffic light in the "Cache Updated" column remains red (= it has not started yet). In transaction SXI_CACHE, the system issues the following error message: "Error when reading HTTP destination: INTEGRATION_DIRECTORY_HMI". However, if you start the partial cache refresh in transaction SXI_CACHE, the cache is updated correctly
Reason and Prerequisites
In particular, this problem may occur after you upgrade from NW2004 to NW2004s. The insufficient user authorizations are caused by an obsolete role profile.
You have already checked the following and you did not detect any errors:
- The HTTP destination INTEGRATION_DIRECTORY_HMI exists, is configured correctly, and the target destination can be reached.
- Users entered in the INTEGRATION_DIRECTORY_HMI destination (usually Integration Server service users) and Integration Directory service users (see ExchangeProfile, Eigenschaft com.sap.aii.directory.serviceuser.name) are set up correctly and are not locked.
For more information about these checks, refer to the documentation "How To handle Caches in SAP XI 3.0" or "How To Handle XPI Caches in SAP NetWeaver 04s" Guide (see SAP Service Marketplace, http://service.sap.com/nw-howtoguides).
Solution :
For the users mentioned under "Reason and Prerequisites", proceed as follows:
1. Delete the user profile for the SAP_XI_IS_SERV_USER or SAP_XI_ID_SERV_USER role. To do this, call transaction su01, enter the name of the service user and choose "Display". Then choose the "Roles" tab and double-click to select the SAP_XI_IS_SERV_USER or SAP_XI_ID_SERV_USER role. A new window is displayed. In the new window, choose the "Authorizations" tab and switch to change mode. Here, delete the profile names.
2. Now choose the new profile names that have been proposed.
3. Then choose "Change Authorization Data" and generate the role.
4. Finally, perform a user comparison.
Cheers,
Prasanthi.

Error 103 pls help me

Similar Messages

Maybe you are looking for