Error 103 when try to update iTunes ? why

Automatic update advised me updates ready to install but when I try with iTunes get error message 103. Has anyone any ideas please?

Test after each of the following steps until the problem is resolved.
Step 1
If you're trying to install more than one update at the same time, do the installations one at a time.
Step 2
Triple-click the line below to select it:  
/Library/Updates
Right-click or control-click the highlighted line and select
Services ▹ Open
from the contextual menu. A folder should open. Move the contents to the Trash. You may be prompted for your administrator password.

Similar Messages

  • HT1338 Getting error 103 when trying to update iTunes to 11.0.3

    What do I have to do to get this latest update to load?

    Test after each of the following steps.
    Step 1
    If you're trying to install more than one update, do the updates one at a time.
    Step 2
    Triple-click the line below to select it:  
    /Library/Updates
    Right-click or control-click the highlighted line and select
    Services ▹ Open
    from the contextual menu. A folder should open. Move the contents to the Trash. You may be prompted for your administrator password.

  • How to correct Runtime error R6034 when attempting to update iTunes on PC?

    How to correct Runtime error R6034 when attempting to update iTunes on PC?

    Hey ievafromsa,
    Thanks for the question. I understand that you are experiencing issues installing iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
    Symptoms may include:
    "The program can't start because MSVCR80.dll is missing from your computer"
    "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
    "Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
    "Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    3. Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    1. Uninstall iTunes and all of its related components.
    2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
    3. Re-download and reinstall iTunes 11.1.4.
    Thanks,
    Matt M.

  • TS3694 got error code when try to update my ipad 2

    keep getting 3194 error massage when try to update to ios 511

    Have you got the latest version of iTunes on your computer : error 3194 ?

  • I keep getting an error message when trying to update iTunes

    Every time I try to update iTunes on my iPad aOr my iPhone I get errors occurred while installing. Please help

    Have you had a look here...
    http://www.apple.com/support/itunes/install/

  • Error message when try to update to itunes 7.02

    Hi,
    I'm trying to update my itunes on my iMac G5 but whenever I try to install the update it comes up with
    ' itunesX cannot be installed on this computer. Please quit iTunes before performing this update'
    I know that OS 10.3.9 is required and that is the system that I'm running on so I'm stumped.
    I'm extremely frustrated as I've previously managed OK when updating for the families other ipods, now I've bought my husband the 2G shuffle I can't even get the update to get it to work!

    Make sure all apps are closed completely then click on the blue Apple (Upper Left hand Corner) Go to Software updates..
    That will update itunes for you.

  • Error Message When Trying to Update iTunes...

    Every time I click Help- Check for updates iTunes gives me a pop-up. This pop-up reads "The server for updates cannot be reached" and to "check my internet connection" or something to that effect. This just does not make sense, since I am able to do everything else as normal on the internet. Help!

    Hello BFox2014
    Try downloading it from the first link in the article below to get it directly from Apple’s website. You will also want to check out the second article to troubleshoot issues with connecting to iTunes Store as well as other Apple services.
    iTunes 11.2
    http://support.apple.com/kb/ts3899
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Regards,
    -Norm G.

  • Runtime error r6034 when try to open itunes

    How do I fix runtime error r6034?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • I get error 2324 when trying to update itunes.  Suggestions?

    I get error code 2324 when trying to install the latest itunes.  Any suggestions?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • HT1925 I keep getting an error 2324 when trying to update Itunes also tried to uninstall all apple file's to start over it  comes up with the same error? HELP!!

    can any anyone help i have been trying to install itune's onto a new computor with windows 8 i keep getting an error #2324.i also tried to unstall itunes,quicktime etc. and get the same message  please help!!

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select
    /var/log ▹ appstore.log
    from the hierarchical list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • Error message when try to download itunes

    Trying to download itunes again to my windows laptop. It appears to be loaded having gone through the set up procedure but keeps coming up with a runtime error message in a box. It says;
    'Microsoft Visual C+ Runtime Library
    Runtime Error!
    Program: C:\Programfiles\itunes\itunes.exe
    R6034
    An application has made an attempt to load the \c runtime library incorrectly
    Please contact the application support team for more information'
    When I clear this box another one pops up and says
    ' itunes was not installed correctly, please reinstall itunes error 7 (windows error1114)
    I have tried to reload itunes but this keeps happening. I tunes has been running correctly on this computer for several years!
    Does anyone out there have a clue as to what to do?
    Much appreciated if you do!
    Phil

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Getting Error Message When Try to Open iTunes

    I recently had to reinstall my Os now I am having some issues. I unlocked all the folders to access my archives but now I open iTunes. I even reinstalled (10.4.1) the application but I am still is getting this error message, "The folder “iTunes” is on a locked disk or you do not have write permissions for this folder."
    I do not know what to do. Please advise. Thx.

    Anyone???

  • Error 1015 when try to update to 4.2 HELP

    i found that apple added new update to 4.2 so i choose update after it finish it gaves me error 1015 now my iphone stucks at recovery mode and all i can do is restore and it gives me the same error

    I have the same problem! Even I changed a computer, changed another usb, changed everything I can change! if u can find 4.0 ipsw I think u can restore ur iPhone back to 4.0, I did, at least I can use my iPhone.
    If you're trying to find 4.0 ipsw u can contact me: [email protected]
    I can;t promise this work 2 u either.

  • TS3694 It says error 3194 everytime I try to update or restore my phone. I have tried pretty much everything on the list. It also says that i have an update for itunes but when i try to update itunes, it sends me to update my iphone and wont let me bc err

    K, well it says that there is a 3194 error everytime i try to update my iphone on itunes or restore it.  I have tried pretty much all the things on the list from here and it is still not working. When I try to update my itunes it says i have a update but then after it tells me to update my phone to iOS 5.1.1 and then here comes the 3194 error again. Please somebody help

    to doublecheck you tried everything error 3194 http://support.apple.com/kb/TS3694#error3194

  • When I try to update iTunes 10.3, Insufficient Privileges error. C:\programData\{429CAD59-35B1-4DBC-BB6D-1DB24-6563521}\x86\DIFxAPI.dll

    When I try to update iTunes 10.3, the installer finishes downloading but then this message appears "errors occured while installing updates. If the problem persist, select Tools, "just download" and instal them manually"
    so I go and do that, select Tools and then just download. Then when it finishes loading it goes back to the Apple Software Updater and pups up another window at this location C:\Users\brandsmart\AppData\Local\Apple\Apple Software Update
    there I find AppleApplicationSupport, AppleMobileDeviceSupport, Bonjour, iTunes, QuickTime and SetupAdmin. So when I select iTunes it starts downloading it again, but this time as if it was the first time (not an update)..
    It takes me to "Welcome to the iTunes Installer" I click next, I accept the terms and conditions and click next, takes me to the "Installations Options" I check and click "Install" then click "accept" then "accept" again, so it starts to download but then when it finishes downloading this meassage appears "the installer has insuffisient privileges to modify this file: C:\ProgramData\{429CAD59=35B1-4DBC-BB6D-1DB24-6563521}\x86\DIFxAPI.dll.
    and there are three options- "Abort, Retry and Ignore." If I "ignore", nothing happens, just closes and pups right back up. If I click "retry," just the same, closes and opens right back up with the same options. If I "abort" it asks me if I'm sure to cancel, so I click "yes" so it says "rolling back action." when it's done it just closes everything and if I try to update, it's the same story all over again.
    If I go to the "Advanced Security Settings for iTunes" I can see my name and two more options, all of them say "allow and full control" so I'm guessing that's not the problem but I don't really know.
    Please somebody help me!! I don't know what to do.

    the installer has insuffisient privileges to modify this file: C:\ProgramData\{429CAD59=35B1-4DBC-BB6D-1DB24-6563521}\x86\DIFxAPI.dll.
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    Vista instructions in the following document: Check your hard disk for errors
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors. You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Maybe you are looking for

  • Error while loading data from PSA to Infoobject through DTP(URGENT)

    Hi- I am running into an issue while loading the data from PSA to Infoobject. It says Data Package 1 : error during processing. Updating Attributes for Infoobject Error in substep Process Terminated Please let me know ur solution as this is very urge

  • I need to know how to re-install my adobe cs6 software. I got a new hard drive.

    I had something wrong with my hard drive, so I got a new one installed but this meant i left behind all of my extremely important software I need for school. When I try to re infall it it says i need my serial number which I do not have because I los

  • Acrobat Pro 11.0.9 print problem with Yosemite OS X 10.10

    I can no longer print 2d barcodes generated by USPS Click-and Ship website after upgrading to Yosemite 10.10.  The PDF on my display shows the 2d barcode, but when sending it to either a Brother printer or an HP printer, the word "Button" appears ins

  • How to get the disk size

    Hi, everyone, does anyone know how to get the size of the disk, say hard disk? In the Writing Device Driver it says that the block device driver must create an 'nblocks' property for each minor block device. I want to get the size of the block device

  • Just accidentally downloaded an unwanted program. how to delete it?

    I am still adjusting from Windows to Mac. Let's say I just want to delete this program completely off my computer. But when I control click/right click on the icon and check the options, the only thing that is remotely close to delete is "eject." Wha