Error 103

My Imac says i have one update, its an itunes update i downloaded it and it starts to install and it pops up error 103 please Help?

Do you have any better luck if you try updating using a .dmg installer downloaded from the Apple website?
http://www.apple.com/itunes/download/

Similar Messages

I am having problems with the installation of Adobe Acrobat. I received an Error 103 the setup file can not be located. Can someone help

I am trying to install Adobe Acrobat after I purchased the monthly membership. I did receive help but the after the installation is complete I receive error 103 which states that the setup file can not be located.

Hi uniquenader,
Did you encounter any errors during installation? Which OS are you using?
Did you have any previous versions of Acrobat / Reader installed?
Please use the Acrobat Cleaner tool ( Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs ) to remove the software completely,
Re-download, reinstall and check.
Regards,
Rave

Error 103 on Mac 10.7.4 having downloaded PS CS6 using the Adobe Download Assistant. Why?

I let the assistant do and chose everything that happened (is there another way?) and yet I am getting this error 103. I have found and read all the other questions on error 103 but none of the contain and actual solution. Plase HELP!

I think I might have to resort to downloading the program from an illegal torrent, just so that I can use my legitimate-purchased product key on it. Would that constitute a form of intellectual property irony?
I am in total agreement with PeterBFreeman. I download 20-30 GB of data per week from other sources at a fast rate, with no problems. Obviously my internet connection speed is not the issue. Nor is my ISP--like PeterBFreeman above, I have tried to do this at two locations with different ISP providers. Could it possibly be that the download-speed problems are on Adobe's end? Because that would make way way way more sense...
And by the way, Manish in comment #3 posted a solution to every error EXCEPT error 103. Exactly which of the 10 or so solutions he provides applies to error 103? Or do I just blindly follow them all, hoping that one will work? Do you really know if any of these will work, or are you just blindly throwing solutions at me hoping that you might get lucky?
FYI, like i clearly stated earlier, I also did a direct download...four times...each of which failed miserably (error 4960--failure mounting dmg file). I wish I could just walk away, but I absolutely depend on Adobe products to survive. So I am stuck. I feel like a battered spouse.
After sifting through a number of forums and double speak--the real problem seems to be that both the Adobe Download Assistant and the direct download links have a very hard time producing an uncorrupted file. The download assistant is supposed to smooth out this problem--and under ideal circumstances, it should be able to peice together a workable file. But alas, download assistant can't seem to do the one thing it is supposed to do--and getting an uncorrupted file seems more like a crapshoot than anything else as PeterBFreeman suggests.
The direct download links also have problems because I can never seem to get a decent download speed--and either it times out or my browser cancells the downloads due to slow download speeds (this happens when I have no other problems with download speed for other applications, programs, media). The four times I did finally download the entire file (twice via direct download and twice via download assistant) I got errors 4960 and error 103 respectively.
Yet, the answer we keep getting from Adobe is, "keep doing the same even though you get the same crappy result every time". This is literally insane. Or I get just straight aversion of the question--either blaming my ISP, or my internet speed or by calling my problem "Rare" when it clearly isnt that rare.
Error 103 is an adobe error. This means that someone at Adobe came up with the number (103) which corresponds with whatever the error is. Telling me that it is rare without indicating what the error is seems just like bad customer service. The problem is clearly beyond your customer service unit. Please please please, go find a person who knows what error 103 is and ask them the following:
1) What is error 103? (i.e. can you give me a semi-coherent definition of what error 103 is?)
2) What causes error 103? (other than it being rare?)
3) Can you give me some step by step instructions to fix or avert this problem? (instructions for error 103. Not error 100, 101, 102, 104, etc)
4) If the causes can be many, what are they and can you give me step by step instructions for each of the possible causes?

Error 103:103 - Abode Reader 10.1.1 & IE 9

Only two ways I found around this issue when opening Pdf's in IE 9,
select "save target to a file"; probably the safest method - one that allows you to view it at your pleasure,
or disable the the protected mode by opening Adobe Reader, Edit Preferences, General tab, "uncheck" enable protected mode at start up, close Reader, restart Reader
Only two methods I found that allows me to view Pdf's when using IE 9 under Vista - oh yes - if i can't get it to work under Vista, nothing else gets it! I rather have one "screwed up"
than a bunch of them. If anyone else has other ideas to get around the error 103:103 code or perhaps the correct way to resolve it, go for it! At least this works until the next update!
Good luck!

You must contact the support team.

Error 103: application.initialWindow.autoOrients is an unexpected element/attribute

Hello.
I'm using Flash Builder 4.5 to experiment with building a mobile app for my Android Nexus One. In order to keep the app in landscape mode, regardless of the orientation of the device, I've read that I need to set the following in the "AppName-app.xml" file:
<aspectRatio>landscape</aspectRatio>
<autoOrients>false</autoOrients>
And this does work fine in the debugger, however when I attempt to test it on my connected device it throws this error:
Error occurred while packaging the application:
D:\Projects\FlexMobile\AppName\bin-debug\AppName-app.xml(108): error 103: application.initialWindow.autoOrients is an unexpected element/attribute
I know that I'm able to build and test apps on my device, as I've been through the Flex Test Drive for Mobile tutorial (http://www.adobe.com/devnet/flex/testdrivemobile.html) and was able to build and run that app with no issues and this app I'm currently working on does run on the device if I do not attempt to restrict the auto orientation.
Thank you.
(Note: I'm re-posting this from the Flex SDK > Developers forum.)

User rblaa provided that answer in http://forums.adobe.com/thread/858772.
The <autoOrients> node (along with several others) occours twice in the generated -app.xml file. Do not un-comment the first instance, instead edit the parameters set in the second already un-commented autoOrients node.

Forms compiler error 103 - help please

I am trying to compile form procedure with legal PL/SQL block this type
PROCEDURE xy IS
CURSOR c_row1_mi IS
SELECT x| |y AS row1, ziehung_id, zs
FROM (SELECT x, ziehung_id, zs
FROM table1
WHERE tm_lo_z_lotto = 'MI'
ORDER BY zs desc),
table2
WHERE ziehung_id = tm_lo_s6_ziehung_id
AND ROWNUM <= 6
ORDER BY zs;
BEGIN
FOR cr IN c_row1_mi LOOP
END LOOP;
END;
There is no problem with running the procedure via SQL Plus. But it is not possible to compile this procedure as a form procedure (version 6.0.8.13.0).
The error message is: Error 103 on row ... found symbol "ORDER" ...
for first (ORDER BY zs desc) clause. Without this "order by" clause the complilation is sucsseful.
Any comment is welcome.

The PL/SQL engine in Forms is based on the 8.0.6 RSFs. The ability to use a SELECT statement in the FROM clause of a query was added in 8.1.6 or later. Therefore you can't use that feature in Forms.
It works in Oracle9i Forms, though, since that's based on the 9i RSFs.
Your only workaround is to move the query to a stored procedure in the database, or change the query.
Regards,
Robin Zimmermann
Forms Product Management

How do I fix adobe error (103:103)

how do I fix adobe error (103:103)

Hi Tonni16,
Are you getting the error with any PDF that you open in IE, or just a certain type of PDF? You can you please try the following and let me know if you're seeing the error?
1. Launch Reader;
2. Choose Edit > Preferences > Security (Enhanced) > uncheck "Enable Protected Mode at startup";
3. Click on "OK" button;
4. Exit Reader;
5. Launch IE and open the PDF file.
If the above steps do not resolve the issue, please uninstall Adobe Reader using Adobe's Cleaner Tool. The tool is available at the following link:-
http://labs.adobe.com/downloads/acrobatcleaner.html
then please re-install Adobe Reader using the full installer from the link mentioned below:
http://get.adobe.com/reader/enterprise/
In case, you still experience the same issue, then please provide the following information:
1. What is the Operating Systems installed?
2. What is the version of Adobe Reader installed on your system?
3. Is Adobe Acrobat installed on your system as well?
4. Which browser is used to view the PDFs?

Flash CS5.5 to iOS error 103: application.version is an unexpected element/attribute

Hello,
I am trying to publish from a flash file, an .ipa file to use in ipad and iphone, but keep receiving the "error 103: application.version is an unexpected element/attribute" error message.
I already publish the app in flash CS5 and it was ok but today i install CS5.5 and the error does not alow me to publish the same file...
Is it an Air ADL problem?
Any suggestions?
Thanks

I don't know if it's an official bug.... Adn I don't know if they will really solve it...
I called 3 times to Adobe Phone Support. I've never been told that it was an official bug. Nobody seemed to know about that bug....
1st call: They told me to go to www.adobe.com/devnet/, saying that I will find the solution there... I found nothing.
2nd call: They told me to call Apple... They said I need a Flash CS5.5 certificate... Of course, Apple does not deliver "Flash CS5.5 certificates". I guess they just wanted to get rid of me...
3rd call: They gave me a phone number to call the Flash Developers Support Center. That phone number was not working....
Each time, I asked them if they can send me a Flash CS5 version, which was working well. They always said it was impossible.
I really need to be able to publish iPhone apps as fast as possible, otherwise I will lose a big contract...
I think my next call will be to my bank... to cancel the payment I made on my credit card to purchase that Flash CS5.5 software.

Flash CS5.5 error 103: application.version is an unexpected element/attribute

Hello,
I am trying to publish from a flash file, an .ipa file to use in ipad and iphone, but keep receiving the "error 103: application.version is an unexpected element/attribute" error message.
I already publish the app in flash CS5 and it was ok but today i install CS5.5 and the error does not alow me to publish the same file...
Is it an Air ADL problem?
Any suggestions?
Thanks

The name of app.
Ex: XXXXXXXX.appname
Use "appname".
But error is related to version number in app xml.

While trying to update anything on macbook i get error 103

I have updates for Remote desktop client 3.7.1, Safari 6.1.1 and ITunes 11.1.4 that i cant run because at the end of installing process I always get an error 103. Any idea what is wrong ?

Try the manual method specified here:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch

I'm trying to download AE 12 trial but can't after a few hours, the download assistant keeps bringing up error 103 I have a Mac OS X 10.9.3, please help, thanks

I'm trying to download AE 12 trial but can't after a few hours, the download assistant keeps bringing up error 103 I have a Mac OS X 10.9.3, please help, thanks

Cred2029 are you utilizing the process listed in Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html to install the After Effects trial?

Unable update Mac to 10.8.5 itune error 103 !!!

Some one guide tired of try to update my mac to 10.8.5 ..... all the time showing unexpected error occurred !!!!!
itune error 103 !!! how can i fix these issue ??

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
This time you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Master collection (error 103)

i have downloaded master collection on mac the download is completed but it is showing on adobe download assistant ,
the setup file cannot be loacted(error 103). Navigate to the folder where you downloaded the product, and start the installation manually!!!!
please help >>>>.

Check this out, it may help. http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html
Try downloading it again from http://www.adobe.com/products/creativesuite/mastercollection.html
Make sure you download them locally, not to any network location.

Error 103 when updating iTunes 10.6.3 -

My Mac Mini (late 2009) doesn't accept iTunes updates. It keeps at version 10.6.3. Problem started when OS X was Lion and it still continues with Mountain Lion. I have downloaded iTunes and tried to install it but with no success. After ML upgrade I tried it again and it doesn't helped. Every time it gives me error 103. Somebody told it is a registering software issue so I made an authorization again with iTunes. Problem is still the same. Now I don't know what to do anymore, it's very frustraiting situation. My MBP works well and it has iTunes 10.7. I'd like to use shared iTunes libraries between these computers but now it's impossible because of different versions.
Any idea?
br. Sauli

You need to backup your computer then uninstall I-tunes and reinstall itunes.
Delete iTunes
Deleting iTunes is not recommended unless you know what you’re doing.
Launch Terminal from the UTILITIES within Applications
Type the following commands:
cd /Applications/
This brings you into the Applications directory, the next command deletes iTunes itself:
sudo rm -rf iTunes.app/
Enter the Administrator password to confirm
There is no warning or confirmation other than entering the admin password, iTunes will immediately be deleted, effectively uninstalling it from the Mac.
Deleting the iTunes application will NOT delete the ITUNES or music, and any purchases bought through iTunes will still remain tied to the Apple ID used to originally buy them.
You can download the newest version from Apple, and running their installer will bring iTunes back to life on your computer.
http://www.apple.com/itunes/download/

I receive error 103 when trying to download

Signig in is a huge pain in the butt.
Photoshop CS6 is the only one of the CS6 line that even make remote sense.
Biggest issue. is Elements 10 download.
I keep getting the "error 103" message.
But it seems as if it actually loaded when I tried it manually.
But, when I select files in the organizer and try to make a mover it tells me I need to download Elements Premier.
Clicked on the link, but the page had an error and no download button. Tried to re download Elements 10 and got that same error 103 issue.
I tell ya dude you guys gotta dumb these things down. I tried Flash to make a sldeshow and couldn't even come close. Looked for tutorial, and I I got was an absurd video about making a bouncing blue ball.

Where are you choosing to download the install files too? I would recommend using the default location of the user folder.
Alternately you can follow the steps listed in http://forums.adobe.com/thread/981369 to initiate a direct download.

Error 103

Similar Messages

Maybe you are looking for