Error 1032 - Ensure you have write permissions to the following registry entries:

I can not copy and paste the page into this forum box so ill have to put the link to the page
at the bottom of this page has the problem aparently for the reason why i can not install adobe flash player 10.1
in the box it says
the installation encountered errors
the active x control for flash player could not be registered
then it says
error 1032- ensure you have the write permisson to the following registry entiries.
please can some read this as ive sadi i can not copy and paste all of these entry permission i do not have aclue what they are on about.
here is the link.
http://kb2.adobe.com/cps/191/tn_19166.html#main_Error codes for Flash Player 10.1
thank you
for any help

Hi, I saw that email notification come in and just had to comment. I re-read your thread and was laughing at it all. I can't believe you still have that great sense of humor after all of the trouble.
Did you hibernate over the Winter and just waking up? LOL
Perhaps Pat will have a way you can check to make sure you have full authority for that Administrator Account.
I know there is the Clock test. Right click over the clock hour/minute and then click on Adjust Date/Time. If you can see the clock and calendar Microsoft says that you have Permission needed to Install Programs. If you don't see that, then there is a problem.
Thanks,
eidnolb

Similar Messages

Linux Mint 17, migrated from Win7: Verify that you have enough disk space, and that you have write privileges to the file system, then try again.

I get this error message (The messages could not be filtered to folder 'Generic Folder' because writing to folder failed. Verify that you have enough disk space, and that you have write privileges to the file system, then try again.) popping up on many, though not all of my incoming filters. I recently migrated from a Windows 7 installation to a Linux Mint 17 system.

I did give it time to run through everything when I initially migrated, and it frequently will sit open for 3 to 4 hours while I'm working on other projects.
The 'Generic Folder' represents sorting folders in my main mail account in Thunderbird. For example, my mail which is listed to filter into my 'Amazon' folder is sorted there with no problem, while any mail designated to be filtered into my 'Games' folder prompts the above error massage.

Adobe Presenter is unable to publish this presentation. Please check that you have enough disk space and you have appropriate permissions for the destination folder.

I have Presenter 10 and published already my presentation to adobe connect. But now I cannot do that any more. I can't publish to my computer or as pdf also. I used collaboration and then put it off, but no effects. Where is the problem?

Hello Thomas,
I also deleted files in C:\Windows\Temp, but that didn't help, I still don't have a presenter add in icon in a ribbon, but under the new windows account I have presenter in a ribbon.
I am using Adobe Presenter 10, MS PowerPoint 2013 and Windows 7 Professional (Service Pack 1). On my "old" account I can see presenter in File, Options, Add-Ins as Inactive Application Add Ins. Every time I check it to be active, but all without result. So I prepare the slides on my account and go to another account for publishing. I'll be happy to resolve this problem.
Svetlana

I can't launch itunes says it's on a locked disk and I don't have write permission for the folder,how do I fix this?

I can't launch itunes on PC it says it's on a locked disk and that I don't have write permissions for the folder.So how would I go about fixing this,any information would be helpfull.Cuz' I wanna transfer stuff from my PC to my Ipad and understand You have to go through itunes to do that.

The path C:/documents and setting/...iTunes.msi cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'iTunes.msi' in a folder from which you can install the product iTunes.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

When compacting, I get an alert that asks me to verify that I enough disc space and that I have write privalages to the file system. How do I do this?

Mozilla asks me if I want to compact, I click 'yes' and after a while I get this:
Alert
The folder 'inbox' could not be compacted because writing to folder failed.Verify that you have enough disc space, and that you have write privileges to the file system, then try again.
I have no idea what to do know. Please can someone help me?

Try restarting your computer in windows safe mode. Links to Instructions here http://thunderbirdtweaks.blogspot.com.au/2014/02/basic-troubleshooting-for-thunderbird.html
See if compacting will work them

HT1349 I am getting an error message when I try to open itunes on my desktop computer: "the folder "itunes" is on a locked disk or you do not have write permissions for this folder"...any ideas?

I am getting an error message on my desktop when I try to open itunes: "the folder "itunes" is on a locked disk or you do not have write permissions for this folder"...Any idea what I need to do to correct?

Hi lvdmerwe!
I have two articles here for you that should be able to help you troubleshoot this issue further:
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/ts1387
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/ts1277
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Just wanted to make sure I had the most up to date version of ITunes on my desktop first. Tried to get on site, and got an error message saying; The folder ITunes is on a locked disk or you do not have write permissions for this folder. Help!

Wanted to sync up my new IPhone4, and thought that I should make sure I had the most up to date version of ITunes on my desktop first. Tried to get on site, and got an error message saying; "The folder ITunes is on a locked disk or you do not have write permissions for this folder." Cannot get on ITunes at all now. Help! Thx.

In my case its a new computer the old one was stolen and the time machine disk did not work for a restore but did for copying the info to the new mac

I am trying to open iTunes on my mac. But a box pops up saying "The folder iTunes is on a locked disk or you do not have write permissions for this folder". Anyone know what that means? I've had my computer 2 years and its never had a problem opening it

I am trying to open iTunes on my mac. But a box pops up saying "The folder iTunes is on a locked disk or you do not have write permissions for this folder". Anyone know what that means? I've had my computer 2 years and its never had a problem opening it

I've already right-clicked on the application, clicked "get info", and changed it so all people listed in the "Sharing & Permissions" section have the "read & write" privilage.
The error message is referring to your iTunes library, not your iTunes application.
You need to check and fix the permissions of the iTunes folder in your iTunes library. This is by default located in your "Music" folder.
Select the folder Music > iTunes in the Finder, right click on it or Ctrl Click and click "Get Info". At the bottom of the contextual window thatwill pop up, disclose the Sharing and Permissions brick, change your status from Read only to Read & Write. You may need to click the padlock icon to make changes.

Not able to open itunes - "The Folder I tunes is on a locked disk or you do not have write permissions for this folder"

I have unintalled and reinstalled several times, just suddenly stopped working. I have windows 7, have for awhile. I get the following message: The Folder I tunes is on a locked disk or you do not have write permissions for this folder"
I had an existing account that i am no longer able to access.
I got one email suggesting right click and run as program administrator, tried it and did not work. Also went into permissions folder and ensured was listed as program administrator.
Help and Thanks in advance.

Hi Chris,
I apologize, I'm a bit unclear on the exact nature of your issue. When you say a "different server", if you mean that you recently changed the location where iTunes was storing its files (local or otherwise), you may find the following article helpful:
iTunes for Windows: Moving your iTunes Media folder
http://support.apple.com/kb/ht1364
Regards,
- Brenden

When i open itunes, it gives me a message "the folder itunes is on a locked disk or you do not have write permissions for this folder" i am the only user and it was working a week ago whats wrong with it? it will not open itunes

when i open itunes, it gives me a message "the folder itunes is on a locked disk or you do not have write permissions for this folder" i am the only user and it was working a week ago whats wrong with it? it will not open itunes

Hi lvdmerwe!
I have two articles here for you that should be able to help you troubleshoot this issue further:
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/ts1387
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/ts1277
Take care, and thanks for visiting the Apple Support Communities.
-Braden

The document could not be saved. The server said: "The operation failed because an unexpected error occurred. (Result code 0×80020005)" Please ensure you have completed all required properties with the correct information and try again.

I am having problems saving documents back to SharePoint when any of the document properties (metadata columns) are set to be "managed metadata". The check-in/save fails with error:
The document could not be saved. The server said:
“The operation failed because an unexpected error occurred. (Result code 0×80020005)”
Please ensure you have completed all required properties with the correct information and try again.
I have seen similar threads that suggest this is a known issue with this version of Acrobat but I would like conformation from Adobe that this is a known issue and whether it is fixed in a newer version?
Adobe Acrobat version 10.1.13
SharePoint 2010

Hi quodd,,
We are sorry for the issue being faced by you. I need some information from you so that I take further steps:
1. Which Adobe product are you using Acrobat or Adobe reader- what is the complete version?
2. How are you opening and saving the PDF, the exact workflow?
Are you doing it from within Adobe Reader/Acrobat application or opening it from browser, doing changes and saving it using browser itself.
3. Can you try to save a PDF to library with Custom template and managed metadata columns using browser directly.
4. Please verify that columns name do not contain spaces or some other special characters.
Can you try to save PDF to library with Custom template and just a single managed metadata column with a simple name
Thanks,
Nikhil Gupta

Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the 'Get Info' command in the Finder to ensure the file is unlocked and you have permission to access the file.

I have this massage every time close ps cc
Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder.

You may get better help in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
If FINDER means Mac, read below (and try to give more information when asking a question)
Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0

== ERROR: BUILDSCRIPT is undefined! Ensure you have updated...

I updated to the latest Pacman in testing, and when I tried to use makepkg, I got this:
==> ERROR: BUILDSCRIPT is undefined! Ensure you have updated /etc/makepkg.conf.
However, I have already checked and modified the configuration, look:
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The FTP/HTTP download utility that makepkg should use to acquire sources
FTPAGENT="/usr/bin/wget --continue --passive-ftp --tries=3 --waitretry=3 --no-check-certificate"
#FTPAGENT="/usr/bin/snarf"
#FTPAGENT="/usr/bin/lftpget -c"
# ARCHITECTURE, COMPILE FLAGS
CARCH="i686"
CHOST="i686-pc-linux-gnu"
#-- Exclusive: will only run on i686
# -mtune builds exclusively for an architecture
# -mcpu optimizes for an architecture, but builds for the whole processor family
CFLAGS="-march=native -mtune=generic -O2 -pipe"
CXXFLAGS="-march=native -mtune=generic -O2 -pipe"
#-- Make Flags: change this for DistCC/SMP systems
MAKEFLAGS="-j1"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(!fakeroot !distcc color !ccache)
#-- fakeroot: Allow building packages as a non-root user
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
BUILDENV=(fakeroot !distcc color ccache)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip !docs !libtool emptydirs)
#-- strip: Strip symbols from binaries/libraries
#-- docs: Save doc and info directories
#-- libtool: Leave libtool (.la) files in packages
#-- emptydirs: Leave empty directories in packages
OPTIONS=(strip !docs libtool emptydirs)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Info and doc directories to remove (if option set correctly above)
DOC_DIRS=(usr/{,share/}{info,doc,gtk-doc} opt/gnome/{,share/}{info,doc,gtk-doc})
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
PKGDEST=/home/ltsmash/packages
#-- Source cache: specify a fixed directory where source files will be cached
SRCDEST=/home/ltsmash/sources
#-- Packager: name/email of the person or organization building packages
PACKAGER="LTSmash <[email protected]>"
# vim: set ft=sh ts=2 sw=2 et:
Any ideas?
Thanks in advance

ambalex wrote:no, after reinstaling there's no /etc/makepkg.conf.pacnew, and the /etc/makepkg.conf is the old one.
If pacman didn't install a *.pacnew version of the config file that means that your makepkg.conf is up to date or, in either case, the same as the default one installed by the package.
Here is the default makepkg.conf file for reference: http://rafb.net/p/5h2PWp94.html

TS1717 Itunes was working earlier and now I receive message that says "the folder "itunes" is on a locked disk or you not have write permissions for this folder" - what is this and how can I fix the problem?

Itunes was working earlier and now I receive message that says "the folder "itunes" is on a locked disk or you not have write permissions for this folder" - what is this and how can I fix the problem?

Hey HaydenJulie,
Thanks for the question, and welcome to Apple Support Communities.
The following article provides information on permissions issues with iTunes. The troubleshooting steps included may resolve your issue:
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks,
Matt M.

Can't install on windows 7 get message - the folder is on a locked disk or you do not have write permissions for this folder

Have tried to install Itunes on laptop running 32 bit Windows 7 - it says it installed successfully but then when I click to open I get the message "the folder is on a locked disk or you do not have write permissions for this folder."

You will have to descripe where the drive is and much more.
Then go and look at the drive and folder and who has group ownership policy and more.
It would have to be a guess, plus "20 questions" but why post here? when there are Snow Leopard, iMac, and of course, iTunes, Community forums.
https://discussions.apple.com/community/itunes
http://www.apple.com/support/itunes
But this is not iTunes, it is a workstation community

Error 1032 - Ensure you have write permissions to the following registry entries:

Similar Messages

Maybe you are looking for