'Error -10401 Occurred at AI Clock Config' When Running Certain Examples ...

I tried following the suggestion given earlier on the website link http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/50f8faa83c79f07f862569f90041855b?OpenDocument
So I changed the Channel A to 0 and Channel B to 1, but still get the same error. I am doing a VI on my own that is getting the same error so I am very confused.

Hello;
I don't have detail on what exactly you are trying to accomplish there.
Can you give me more details such as what board you are using, what you need to accomplish, etc?
Meanwhile, the error -10401 occurs if you are trying to address a device that is not present. If MAX cannot see the DAQ card or you have changed the device number of the card, you will get this error. So, I recommend you first use MAX to do basic testing with the board, and check if the device number you are setting at the LV VI corresponds to the device number MAX assigned to that board.
Hope this helps.
Filipe

Similar Messages

Error 10401 occurred at AI Hardware Config, when using AI Acquire Waveform vi

I can successfully run applications that use the AI Sample Channel vi, however when I use the AI Acquire Waveform vi the following errors are generated:-
Error -10401 occurred at AI Hardware Config, followed by
Error -10401 occurred at AI SingleScan.
All applications have been developed using Labview 6.0.2, on an NT machine. The applications are then run (or atleast attempted to be run) using the Labview Run-Time Engine on a different NT machine.
The driver software I am using is the NI-DAQ Native Data Acquisition Driver Software Version 6.1.

Hi,
I've found a Knowledge Base on the NI website describing some situations where this problem occurs:
http://digital.ni.com/public.nsf/websearch/46F78EDD19BA0CC386256CEE007201FC?OpenDocument
That error code is generally seen when something has changed in the DAQ card's configuration, or the drivers are not installed properly. It's strange that this is showing up only on certain functions for your application.
Also try having a look through the DAQ troubleshooting pages on the website:
http://www.ni.com/support/daq/
Regards,
Mark Lee
National Instruments

Error -10401 occurred at AI Group Config - in relation to USB-6008

I'm attempting to run a simple vi that uses AI Aquire Waveforms.vi to input voltage data that I have coming in from the USB-6008 DAQ. However, when I try running the program, I receive the error:
Error -10401 occurred at AI Group Config
Possible reason(s):
NI-DAQ LV: The specified device is not a National Instruments product, the driver does not support the device (for example, the driver was released before the device was supported), or the device has not been configured using the Measurement & Automation Explorer.
And I'm not sure how to fix it. In MAX, the device seems to be working properly and everyhting seems to work fine in the test panel, so I'm slightly at a loss. I'm running Labview 7.1, and installed NI-DAQmx 7.5 which came with the USB-6008.

Never mind. I'm new to Labview, and didn't realize that I could not use the traditonal Data Aquisition components with the USB-5008 (I didn't even realize that NI-Daqmx was different).

Help with Error -10401 occurred at AO Group Config

I am receiving the error: "Error -10401 occurred at AO Group Config" and have been unable to fix it.
Some background: This is someone else's program who has since left, so I am not very familiar with it. It was running fine a little while ago, until the PCI-GPIB card broke. We got a new GPIB card (essentially the exact same model; the old one was 183619B-01; the new one is 183617K-01) and now this error appears every time I try to run it.
I believe this is being thrown by the "AO Config.vi" in my VI Hierarchy. From reading other forums, such as this: http://digital.ni.com/public.nsf/allkb/46F78EDD19BA0CC386256CEE007201FC and this: http://forums.ni.com/t5/LabVIEW/Change-in-PCI-Device-Number/m-p/2312186#M726679, it seems it may be a problem with properly assigning device numbers. (The new GPIB card may have been assigned a new device number while the program is calling the old one). However, the solution offered is to right-click on the device in MAX and change the device number, but when I right-click I am not given that option (see attached image). On the other hand, it could also be some sort of driver problem.
I am running LabVIEW 8.2.1 and Measurement and Automation Explorer 4.2.1.3001 on Windows XP SP2. Any help is greatly appreciated.
Attachments:
error.PNG ‏89 KB
right click.PNG ‏77 KB
hierarchy.PNG ‏94 KB

Hi bh424,
I would make sure that you have updated drivers as you mentioned. If you are using TDAQ make sure to reset the device driver mentioned in the KB you listed.
Another thought would to be to remove and readd the device in MAX to refresh it, and potentially change the naming in your program to reference a new named device. If you cannot rename the device in MAX you could look at repointing the device in your code.
Are you able to communicate with the device at all in MAX through simple queries? From the right click screenshot it looks like *IDN did not communicate properly.
Have you also refreshed the list or rebooted your machine?
http://digital.ni.com/public.nsf/allkb/23B5918E5604915B86256C2B005F4D70?OpenDocument
I would first ensure you can communicate with the new card in MAX alone. Here are some troublehsooting steps if that is not the case:
http://digital.ni.com/public.nsf/allkb/A80DBFCCAC36EBDE862562C80058856E?OpenDocument
There is also the possibility that the card is broken as well. If it was indeed purchased from a 3rd party vendor, there is less we know about the card or what could have been done to it before you acquired it.
Regards,
James W.
Applications Engineer
National Instruments

The error "-10401" occurred in the current database connection "LCA"

Hi everyone,
I installed livecache 7.7 with scm7.0,when i did postinstallation Initialization or run t-code lca03,i got error dump as below.now the livecache states is good.in scm server I not installed package Lcapps.please help give your advise,thank you so much.
untime Errors         DBIF_DSQL2_SQL_ERROR
xception              CX_SY_NATIVE_SQL_ERROR
ate and Time          01/20/2010 03:26:32
Short text
    An SQL error occurred when executing Native SQL.
What happened?
    The error "-10401" occurred in the current database connection "LCA".
How to correct the error
    Database error text........: "Conversion of parameter/column (1) would tru
     data"
    Database error code........: "-10401"
    Triggering SQL statement...: "EXECUTE PROCEDURE "APS_PLAN_VERSION_GET""
    Internal call code.........: "[DBDS/NEW DSQL]"
    Please check the entries in the system log (Transaction SM21).
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:

Hi Natalia,
thanks for you much help,the livecache version is 7.7.02,so I will try to upgrade to 7.7.04,thank you.
Server Utilities    d:/sapdb/programs      7.7.02.08     64 bit    valid
DB Analyzer         d:/sapdb/programs      7.7.02.08     64 bit    valid
PCR 7301            d:/sapdb/programs      7.3.01.21               valid
PCR 7500            d:/sapdb/programs      7.5.00.42     64 bit    valid
SAP Utilities       d:/sapdb/programs      7.7.02.08     64 bit    valid
APO LC APPS         d:/sapdb/k1p/db/sap    6.00.004      64 bit    valid
Base                d:/sapdb/programs      7.7.02.08     64 bit    valid
Redist Python       d:/sapdb/programs      7.7.02.08     64 bit    valid
JDBC                d:/sapdb/programs      7.6.03.02               valid
Messages            d:/sapdb/programs      MSG 0.5010              valid
ODBC                d:/sapdb/programs      7.7.02.08     64 bit    valid
SQLDBC 77           d:/sapdb/programs      7.7.02.08     64 bit    valid
Database Kernel     d:/sapdb/k1p/db        7.7.02.08     64 bit    valid
Loader              d:/sapdb/programs      7.7.02.08     64 bit    valid
SQLDBC              d:/sapdb/programs      7.7.02.08     64 bit    valid
Fastload API        d:/sapdb/programs      7.7.02.08     64 bit    valid
SQLDBC 76           d:/sapdb/programs      7.6.01.15     64 bit    valid

Application error 0xc0000409 occured at location 0x004120cb comes when click on pdf

application error 0xc0000409 occured at location 0x004120cb comes when click on pdf
I have installed Foxit as well as Adobe XI.
PC is XP, SP3

This forum is only to discus the forums themselves or to comment on them.
Try the Adobe Reader forum:
http://forums.adobe.com/community/adobe_reader_forums

Why do videos embedded in facebook and livejournal posts say "an error has occurred, please try again later" when I click on them?

Videos embedded in facebook and livejournal posts say "an error has occurred, please try again later" when I click on them. (This doesn't happen in Internet Explorer.) I have the latest flash player, and the only firewall in use is Windows Firewall. Popups are blocked.

mgpainter wrote :
prince2012 wrote:
Hi mgpainter
Welcome to the Community
Sorry I am not a RIM employee, But still regarding your problem have a look at this RIM Knowledge Base to resolve the error .Try it and see if it resolves your problem : KB25882 .
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Thanks for the welcome and the reply!
I looked at KB25882 and my settings are good, so that didn't help.
I had this problem over a year ago, and someone at RIM found a bit set that shouldn't have been set and fixed it (that is my terminology for what happened).
I am really looking for a way to contact RIM directly. I hate going through the mill with my carrier to get it escalated to RIM for resolution...... <sigh>
Hi mgpainter
Most easiest way to Contact RIM is through your Carrier but as you don't prefer that than there is another way of support called Incident Based Support but just want to inform you that its not free.If you want have a try BlackBerry Incident Based Support .
Good Luck
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

I get errors When running the example programs SampleMetadataDiscoverer10g

I installed database is 10g release 2 on Windows XP,and AWM version is 102010A.
When running the example programs SampleMetadataDiscoverer10g.java to get the OLAP metadata,I get the following errors:
oracle.express.idl.util.OlapiException: java.sql.SQLException: ORA-37158: CLOB 或可变数组输入参数错误: (情形 6)
ORA-06512: 在 "SYS.GENSERVERINTERFACE", line 46
ORA-06512: 在 line 1
at oracle.express.idl.ExpressConnectionModule.ServerInterfaceStub.connect(ServerInterfaceStub.java:694)
at oracle.express.olapi.data.full.ExpressDataProvider.connect(ExpressDataProvider.java:436)
at oracle.express.olapi.data.full.ExpressDataProvider.initialize(ExpressDataProvider.java:282)
at oracle.olapi.examples.chapter4.MyConnection10g.connectToDB(MyConnection10g.java:126)
at oracle.olapi.examples.chapter4.SampleMetadataDiscoverer10g.initialize(SampleMetadataDiscoverer10g.java:57)
at oracle.olapi.examples.BaseExample.execute(BaseExample.java:32)
at oracle.olapi.examples.BaseExample.execute(BaseExample.java:46)
at oracle.olapi.examples.chapter4.SampleMetadataDiscoverer10g.main(SampleMetadataDiscoverer10g.java:44)
Closing JDBC connection.
Closed the connection.
please..can someone give me some advice? thanks!

I got the same error while doing "dp.initialize()"
I fixed this error by chang the the "olap_api.jar class12.jar" to "o4j.jar".
But i can't explain that.
Can anyone tell me why?
By the way , the "olap_api.jar class12.jar" are copy from the %ORACLE_HOME%\10.2.0\db_1\olap\api\lib .

[Forum FAQ] Troubleshooting "An error has occurred during report processing" message when viewing SCCM reports

Symptom:
When you view a report with SCCM, you may encounter the following error message:
An error has occurred during report processing.
Under the details box, you can see the detailed error information as below:
System.Web.Services.Protocols.SoapException: The report server has encountered a configuration error. Logon failed for the unattended
execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. Logon failed for the unattended execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException:
Log on failed. Ensure the user name and password are correct. ---> System.ComponentModel.Win32Exception: The user name or password is incorrect
at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ParameterInfoCollection& Parameters)
at Microsoft.ReportingServices.WebServer.ReportingService2005.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
Figure 1 is the screenshot of the error message in SCCM:
Figure 1.
Cause:
According to the detailed error message, it indicates that “The report server has encountered a configuration error. Logon failed for the unattended execution account.”
and “The user name or password is incorrect”, so this issue would be caused by the mismatched credential stored in report server.
Solution:
To solve this issue, you can follow the steps below:
1.
Access Report Manager URL on your reporting server.
From figure 2, you can see that the URL for Report Manager is
http://SCCM:80/Reports
in our lab environment. You can check your Report Manager URL in Reporting Services Configuration Manager.
Figure 2.
2.
Find out the date source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} and access it.
Figure 3.
3. Test connection (Figure 4)
You can have a test connection to check whether the credentials stored in the report server are correct or not.
Figure 4.
4.
Modify the password or choose another authentication method
If you want to change the password, please make sure that password is the same as the one that you have set for that user account in the domain.
5. Confirm connection
After you change the password, you can test connection again. From figure 5, we can see that connection created successfully.
Figure 5.
After all the steps above, there is no error message when viewing the report. (Figure 6)
Figure 6.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

ok . the user name is sccm.admin this user have the assignment to run as a services, he is a domain admin, on the sql server this user have the sysadmin, i create the reporting with the Reporting Services Configuration Manager, and on the Database i use
the sccm.admin to create the new database, on the Service Account i use sccm.admin user, also this user have local administrator on the SCCM server, + i give him the dbreader on All the database on the SCCM server witch it also the SQL server, i add the sccm.admin
on the reporting web the system role and check the all settings give him full permissions
do i make my self clear ? (my English is not so bright )
now from the SCCM 2012 console , some reports run perfectly, and some run and trow this error at me
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
this poor gay have the same problem
An error has occurred during report processing. (rsProcessingAborted)

AN ERROR MESSAGE KEEPS POPPING UP IN MY CREATIVE CLOUD SAYING AN ERROR HAS OCCURED PLEASE TRY AGAIN. WHEN I TRY AGAIN THE MESSAGE STILL POPS UP.

I am getting an error message popping up on my creative cloud stating that an error has occurred in downloading please try again. When I try again the message pops up again.
What do you think the problem might be?

AppMom if you are consistently receiving a download error then it is likely there is problems with your download. Please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html for more details on how to resolve download errors.

"Error -2147352573 occured at Member not found" when trying to open an excel template

I'm trying to open an excel document as a template using the report generation tools but coming up with this error. I've traced the error to NI_ReportGenerationToolkit.lvlib:Excel_Open_Workbook.vi but have to idea why it's happening. The document seems to be fine as I can open and edit it in Excel. Has anyone else seen this? I'm using Labview 8.6 and Excel 2000. I've attached an image of the error and it's source. Thanks.
Attachments:
Excel open error.doc ‏558 KB

Hi Mike,
Thanks for pointing out the compatibility issue. I got the error with version 1.1.3 and therefore upgraded to 1.1.4 - after taking a glance at the readme document. I guess that I was mistaking the supported OS version ("Windows Vista/XP/2000") with the supported version of MS Office ("2007/2003/XP").
I originally received the error when running an executable on a Office 2000 machine. The executable was built on a Office 2003 machine since I have previously been able to build on Office 2003 and run on 2000. I'm not sure what was different with this executable. Anyway, after installing the LV development system on the Office 2000 machine, the issue turned out to be that some ActiveX methods had been disconnected. All I had to do was re-point the Invoke Nodes to the appropriate ActiveX methods.
Please note that my application in this case is very simple and therefore only exposes a small part of the Office 2000 ActiveX API. I'm sure that I would run into a non-compatibility wall if I were to implement more Office 2000 functions with RGT 1.1.4.
Message Edited by Philip Courtois on 06-18-2009 01:26 PM
- Philip Courtois, Thinkbot Solutions

Slow reports giving "An error has occurred: Request timed out" on first run

I have BO XI R1 SP4 installed on Windows 2003 R2 SP3 with .Net 1.1 installed.
Most of our reports are quite large (>60000 rows returned) and will timeout in InfoView when first run and give the message in the subject. When you close the window and re-run them then they come up almost straight away.
This tells me that the report runs and it gets stored in the cache server, which is fine, but I want to be able to eliminate the timeout for the users.
I found a solution if .Net 2.0 is installed (HOW TO: Resolve 'An error has occurred: Request timed out' issue) but my server only has .Net 1.1.
Is there a change to a timeout I can made to the server as it is, or should I install .Net 2.0 and change IIS to use that version of .Net then make the solution change already suggested?
TIA
I should add that the timeout is after around 5 minutes, so the normal changes recommended at note 1198539 doesn't seem to apply, as the timeout happens after the normal 90 seconds expires for some time.
Edited by: Geoff Croxson on Sep 3, 2009 2:02 PM

Will something like this work on an iPhone and where would I locate it? My App Store was working just fine and this last week it's been slower and slower, plus difficulties with downloading and updates. Both my downloads and updates start and then pop up a 'can't install at this time'. I thought it might b my storage space so I started deleting. Well I have plenty of space now and still get same problem.
Now over the last two days I will type in a search to reinstall the apps that I removed and the App Store tells me request timed out.
Help please

Errors found when running the example of "Five XSLT 2.0 Features ..."

Does anyone encounter the error "XSL-1015: (Error) Function 'current-group' not found" when running Oraxsl grouping_20.xsl?
Despite I followed exactly what memtioned in the article, it still did not work.
Thank you very much.

Before running the samples, I downloaded the Oracle XDK 10G via http://otn.oracle.com/tech/xml/xdkhome.html
just a week ago.
So, I believe I got the most up-to-dated version of XMLparserv2.jar.
I spent a day or 2, trying to execute some samples in the article, but things did not work out well. Whenever a stylesheet file (*.xsl) contains "current-group()" functions, it raises the above error.

Can it be easier when running simple examples in jmstutor

Hi, I'm a new user of java. when I tried to use Simple examples in jms_tutorials, such as SimpleQueueSender.java, I found I had to type a long command:
java -Djms.properites=%J2EE_HOME%\config\jms_client.properties SimpleQueueSender MyQueue 3
It seems a little inconvienent.
Can I first set the properties, then run the programe?
How?
Thanks a lot!

You could put the command in a script and run it that way. But you do need to pass that -D option to the java command at J2EE 1.3.1.
You could move to J2EE 1.4 Beta and use the J2EE Tutorial Addendum, which simplifies running the examples by providing Ant build scripts.
Kim Haase
Technical Writer
Sun Microsystems, Inc.

8.2.1 crash when run certain vi on vista.

When run the attached vi, lv will crash everytime as screenshot, any suggestion?
Attachments:
error.jpg ‏48 KB
error1.jpg ‏57 KB
SB CLIENTS.llb ‏414 KB

hi!
Thanks for the post and I hope your well today.
There could be a number of reasons why your code crashes - which vi was it?
Have you checked for memory leaks? or CPU usage?
When you say "on vista" does this mean it doesnt crash XP?
Does you code crash another machine?
More details would really help the community to resolve your issue.
kind Regards,
James.
Kind Regards
James Hillman
Applications Engineer 2008 to 2009 National Instruments UK & Ireland
Loughborough University UK - 2006 to 2011
Remember Kudos those who help!

'Error -10401 Occurred at AI Clock Config' When Running Certain Examples ...

Similar Messages

Maybe you are looking for