Error 10403 in Virtual channel Test Panel, but test pannel for device works fine

I am using a simple 10x probe attatched to the NI5112 PCI card. When the device is tested under the devices and interfaces part of MAX, I get the scope input, when I test the virtual channel for the scope, i get error 10403. How can i resolve this?

The reason you get that error is that virtual channels are not supported with our high-speed digitizers. Only devices that can be programmed directly with NI-DAQ support virual channels. The legal way to address a high-speed digitizer is by using DAQ::N, where N is the device number in MAX.

Similar Messages

  • 3rd gen iPod Nano will not sync with latest version of iTunes. It passes the connectivity test but not the sync test under diagnostics.  Worked fine on old Windows 7 laptop but not new one.  From Control Panel it shows up as an Apple iPod USB Device...

    3rd gen iPod Nano will not sync with latest version of iTunes on new laptop. It passes the connectivity test but not the sync test under diagnostics.  Worked fine on old Windows 7 laptop but not new one.  From Control Panel it shows up as an Apple iPod USB Device...

    Never mind, I think. I think I figured it out. There was 1 song (out of > 900!) that somehow had been purchased with the other ID - I have no idea how. Once I deleted that song, it stopped asking.
    There may be something with the newest iTunes version too. I didn't think in older versions that the "On this iPod" list of songs was greyed out. But at least it syncs ok.

  • I'm trying to sync my Iphone to get some new music but getting error message 'itunes was unable to load data class info'.  How do I fix it (my husband's 2 devices work fine on the PC)

    I'm trying to sync my Iphone to get some new music but getting error message 'itunes was unable to load data class info'.  How do I fix it (my husband's 2 devices work fine on the PC).  It's driving me mental and has stopped me putting anything new on for months.  Help!!!

    http://support.apple.com/kb/TS2690

  • When try to connect my iPod touch 4th gen to my house Wifi it won't connect, it used to work fine but now it dosen't work, but it does say that the internet is available, but when I tap on it it just loads. all other devices work fine.

    When try to connect my iPod touch 4th gen to my house Wifi it won't connect, it used to work fine but now it dosen't work, but it does say that the internet is available, but when I tap on it it just loads. all other devices work fine.

    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • How do I open a library book on a recently acquired Samsung Nook?  I get "too many activations" error. I have an active adobe digital editions and my other devices work fine.  Custumer Support was unable to get the new device activated.

    I have a library book on the bookshelf of a newly acquired Samsung Nook but I cannot open it.  My other devices work fine but I cannot activate the new unit.  I get a "too many activations" error message.  Customer Services say I have a valid license but they deemed my problem to be a technical issue and referred me to the forum.  Thanks

    Step 1 - by trial and error...
    So far, I have been able to create physical files containing MP3 and JPG on the NAS using the Windows XP systems to copy from shared locations on the Vista and Win7 boxes.  This process has been aided by the use of a 600 GB SATA 2 capable hard drive enclosure.  I first attach to Win 7 or Win Vista and reboot to see the local drive spaces formatted on the portable device.  Then I copy files from the user's private directories to the public drive space.  When the portable drive is wired to an XP box, I can use Windows to move the files from the portable device to the NAS without any of the more advanced file attributes being copied to the NAS.  Once the files are on the NAS, I can add the new folder(s) to iTunes on any of the computers and voila, the data becomes sharable via iTunes.  So far, this works for anything that I have completely purchased, or for MP3's I made from the AIC files created when I purchased alblums via iTunes. 
    I have three huge boxes full of vynl records I've accumulated.  The ones that I've successfully digitized via a turntable attached to the sound card on one of my computers and third party software, have found their way to the NAS after being imported into iTunes and using it to bring down available album art work.  In general I've been reasonably well pleased with the sound quality of digital MP3 files created this way, but the software I've been using sometimes has serious problems automatically separating individual songs from the album tracks and re-converting "one at a time" isn't very efficient.

  • I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing.  There is a check box selecting "picture" which has been checked - but no picture.  This worked fine on OS10.7.5.  Problem??

    I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing.  There is a check box selecting "picture" which has been checked - but no picture.  This worked fine on OS10.7.5.  Problem??

    First, back up all data immediately, as your boot drive might be failing.
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • My iphone 4s fell from the bed and the front screen glass got cracked but the touch screen is working fine, so can i replace just that screen glass?? If not what am i to do ? And how much it might cost me for that repairing??

    My iphone 4s fell from the bed and the front screen glass got cracked but the touch screen is working fine, so can i replace just that screen glass?? If not what am i to do ? And how much it might cost me for that repairing??

    I don't know. You'll have to ask.
    FYI, if the phone was not originally sold in India, it can not be serviced in India. You will have to take it back to the country where it originated.

  • The error console, I clear it and 4 minutes later it has 100's of yellow, pink & blue message lines in it, without me making 100's of clicks or commands ?? .... Other than the error console filling up faster than a superman, it seems to be working fine.

    The error console, I clear it and 4 minutes later it has 100's of yellow, pink & blue message lines in it, without me making 100's of clicks or commands ?? .... Other than error console filling up faster than a superman, it seems to be working fine. why does it register so many yellow, pink & blue warnings, errors, etc. ???
    This happens no matter where I am browsing, yahoo, google, mail or news. Clearing the console seems to help with the speed of FF after an hour or so of browsing, it slows down terribly and if not cleared and or shut down and relaunching FF, both actually, it is painfully slow, like dial-up.

    Hi Mac Attack,
    My computer will not disconnect from the internet.  It seems to find a clone router and continues even when I shut down and unplug my my own home iy
    Your main question was 'chopped' in the title. Please reply in the body of a reply box with the full question and anything you have tried. And no, the long report was not helpful .
    If the same website is opening each time you launch a browser (Safari?) hold down the shift key as you launch to prevent previous pages from opening.
    Have a look at your settings in Safari > Preferences. Especially General and Privacy.
    Reset Safari to remove cookies and other stored data.
    System Preferences > General
    Have a look at your settings in System Preferences >  Security & Privacy.
    Call back with more questions.
    Regards,
    Ian

  • On my iPad mini, my inbox number count is over 500 even though the inbox. Is empty. All accounts do this on my iPad but all my other device are fine. Problem showed up two weeks ago???

    On my iPad mini, my inbox number count is over 500 even though the inbox. Is empty. All accounts do this on my iPad but all my other device are fine. Problem showed up two weeks ago???

    Hi Peter,
    Thanks for participating in the Apple Support Communities.
    It sounds like the Mail app on your iPad mini is showing that you have over 500 unread email messages, but your inbox is actually empty.
    There are several steps I'd use to troubleshoot this situation.
    First, restart your iPad to see if it clears up the symtom:
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    Press and hold the Sleep/Wake button until the red slider appears.
    Drag the slider to turn your device completely off.
    After the device turns off, press and hold the Sleep/Wake button again until you see the Apple logo.
    If this doesn't correct the behavior, try removing and re-adding the affected email accounts next:
    Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
    Delete the affected email account from your device.
    Tap Settings > Mail, Contacts, Calendars.
    Tap the affected email account.
    Tap Delete Account.
    Add your account again.
    If the same thing happens after re-adding the account, you may need to use the steps below to reinstall iOS. You may want to back up your iPad to iTunes before completing this step.
    Make sure that you have iTunes 12 or later on your computer.
    Put your device in recovery mode.
    When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
    From:
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    All the best,
    Jeremy

  • Unable to login to IMessage in my new ipod touch 5th gen, saying wrong password. but the same password is working fine for my applestore.

    saying wrong password. but the same password is working fine for my applestore.

    Im Getting The Same Problem With My Ipod 4th Generation
    Seems Like This is a Software Issue
    Help Please

  • Ok....I have a 2012 MBP that has Yosemiti installed.  The airplay works from iTunes, but when I try to mirror from the desktop I get the "no device detected" message.  Airplay on all of my other devices work fine.  Has anyone else had this issue?

    Ok....I have a 2012 MBP that has Yosemiti installed.  The airplay works from iTunes, but when I try to mirror from the desktop I get the "no device detected" message.  Airplay on all of my other devices work fine.  Has anyone else had this issue?

    Hey Marco'96,
    Welcome to the Apple Support Communities! I understand that you are experiencing issues with AirPlay mirroring in OS X to your Apple TV. The following resource includes helpful troubleshooting steps towards the end of the article, which may resolve your issue:
    About AirPlay Mirroring in OS X - Apple Support
    http://support.apple.com/HT201343
    Thanks,
    Matt M.

  • I have a 3GS. Am trying to sync a plantronics explorer 232 Bluetooth headset and can't figure it out. I have Bluetooth turned on but it searches for devices and the headset never shows up. Anyone know exactly how to do this?  My tech skills are lacking

    I have a 3GS. Am trying to sync a plantronics explorer 232 Bluetooth headset and can't figure it out. I have Bluetooth turned on but it searches for devices and the headset never shows up. Anyone know exactly how to do this?  My tech skills are lacking

    I have the same blueparrott headset headset with the directions. Actually reading them just fixed my iphone pairing issue.
    Here they are in case u still need them along with what I needed to do to get mine to work with iphone 4
    Pair Headset with Phone
    Turn off headset off
    Hold down headset's MFB (large top button) until red & blue lights flash and you hear 2 rising tones, followed by 4 more tones. Must wait for all before you release the MFB button!! (I had my hubby hold the MFB while I waited for the tones since both come from the headset
    Release the MFB and follow your phone's instructions to place it in 'bluetooth' discoverable mode.  With the iphone4, go to "General" and then "Bluetooth" and turn indicator to "ON".
    This is where my issue occurred as the phone could not find the bluetooth, although it worked with my LG phone.  So after trying it several times thinking I was nuts and that the issue was with the iphone, I looked further in the blueparrot's directions and found this step that fixed the issue.
    Reset Paired Devices List
    On the bluetooth, press and hold down both the volume up & volume down buttons for 5-6 seconds.  A double beep will be heard and the list will be reset.  Pairing info for devices previously paired will be lost.
    The bluetooth directions provide this as step 4 but that did not work for my phone (see below)
    4. Once the phone discovers the headset, select "pair" and enter "0000" code and that when pairing is complete the blue light on the headset will stop flashing and phone will prompt you to 'connect'.
    This is what I had to do after resetting the device list on my bluetooth
    4. My iphone instanting discovered the headset and displayed it under 'Devices" but showed a message that it was 'not connected'.  Once I selected the device on the iphone by pressing on it then it changed to "connected". 
    Even when I turn the bluetooth on and off the device remains on the list and alll I do is select it to connect and disconnect after I turn on my blueparrott bluetooth
    I hope this helps others!   

  • I have just updated to Final Cut Pro 10.1.4 - I have updated Projects and Events on my external hard drives (off the File menu). It's says under several project 'missing file' - but they were all there working fine before I updated.

    I have just updated to Final Cut Pro 10.1.4 - I have updated Projects and Events on my external hard drives (off the File menu). It's says under several projects 'missing file' - but they were all there working fine before I updated. I am working off 2 external drives - not sure if that would make a difference.

    After the update each seperate connected drive should now have a seperate Library.
    The older Projects and Events folders would have to be at the top level of those drives go be seen and updated.
    Were all the necessary Projects and Events in the corrrct place before updating?
    Al

  • Errors in Creating Virtual Channel

    I am creating a IVI switch driver. The driver passes the IVI Specific Driver Suite 2.2 and IVI Switch SFP testing. When I try to create the virtual channel the device is found (created IVI Logical Name and other fileds) but the channels displayed are empty on the Channels/Exclusion tab. What calls are made when creating the virtual channel? I want to create a CVI or TestStand program to simulate the sequence that Switch Executive performs.
    When validating a configuration, are all possible channels used in SetPath loop? As an example, if three channels are defined (Front, rear, & base) but only the front->base, rear->base, base->front and base->rear are valid configurations. Will the vaildate try a front->rear configuration? Will a disconnect call be placed in between each SetPath call?
    Thanks.
    Randy

    Randy,
    Although you cannot step through the NISE engine, you can step through your driver's code and debug its behavior. If you have problems with importing IVI virtual name into switch executive virtual device, then what you need to do is select nimax.exe as the process to debug and run it with the debug version of your driver. If you were using CVI, you can set the external process under Run>>Select External Process. If you're using MSVC, you can choose "open project" and browse to nimax.exe and then add symbols for your driver DLL in the project settings.
    The entry points to monitor (for your particular problem) are the ones that deal with getting the number of channels and getting individual channel names and their attributes. Make sure that your driver returns the correct number of channels and that it also returns all these channel names correctly. If you see no error in switch executive (I.e. it just says OK after you import your ivi logical name), then my guess is that your driver returns 0 for the number of channels.
    Please be aware that switch executive exercises much more than any of the IVI clients you mentioned. Yet it does not go "through the back door" for anything, it (obviously) uses public entry points in the driver to perform what it needs to do.
    So, you can start by setting up debug project in your favourite environment, and check the behavior of the following functions in your driver:
    getting the IVISWTCH_ATTR_CHANNEL_COUNT attribute
    IviSwtch_GetChannelName (with your prefix, of course)
    and see if those work. My guess is that something is not working correctly between these two functions.
    Let me know
    -Serge
    Srdan Zirojevic

  • AI Group Config Error 10001 using Virtual Channels

    In my LabVIEW block diagram, I usually enter in numbers, e.g. 0,1,2 for the channel string input of AI Config. When I try to use a virtual channel, I simply type in the virtual channel, e.g. 0,K Thermocouple,2. However, this causes AI Group Config Error 10001, which applies to an invalid channel string. What is the correct way to enter a virtual channel into the channel string?

    Do you have channels with virtual names of "0", and "2"?
    If not you may be confusing MAX by using both naming conventions.
    Try using only Virtual names.
    I generally will use an array of strings where each element is the vitual channel name with no problems.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

Maybe you are looking for