Error 1045: Interface Not Found

I have no idea why I am getting this error. The interface is in the project build path, but this error still comes up and also used the "implements" attribute in the class definition. Anyone familiar with this error and has a possible solution?

Have you imported the interface?

Similar Messages

Interface Not Found Error when Using Snap Example for Firewire (IEEE 1394)

I just recently installed a SONY XCD-SX910 to interface with Labview 8.2. When choosing the driver, only the Legacy driver would work for the Firewire(R) (or IEEE 1394) installation. After installing the driver, I successfully acquired images from the MAX inteface. However, when attempting to trace through the 1394 Legacy Snap Example from the IEEE 1394 installation document, I am receiving the error "Interface Not Found". I have tried a few iterations attempting to name the camera such as "cam0" (the name assigned to the camera in MAX) and "cam0 : SONY XCD-SX910". However, the error persists.
What should I name my camera for it to find the interface? Is there another underlying problem that is not obvious?
Solved!
Go to Solution.

Is the Legacy Snap example you are referring to the one that is seen here: http://zone.ni.com/devzone/cda/tut/p/id/2977? Can you post screenshots from both Measurement & Automation Explorer and the VI you are trying to use? Also, can you verify in Measurement & Automation explorer that you are using the 1394 driver? You can do this by right clicking your camer and the selecting driver and choosing the appropriate one. Some more information on all that you are seeing would help in order to troubleshoot this.
-Zach
Certified LabVIEW Developer

PI MDM Adapter Error - MDM port not found

We are working on an R/3 - PI - MDM scenario using the PI MDM Adapter. We are currently encountering the following errors.
In RWB - Communication Channel Monitoring
MDM Adapter listener could not start due to: Can not create repository session '<server=XXXXXXXX serverUser=Admin repository=Product user=Admin>' caused by: Connection Failed: Cannot create connection to MDM Server 'XXXXXXXX' for one of the following reasons: (1) server does not exist, (2) server is not started, or (3) input/output problem while creating connection, error code: UnknownServer
In RWB - Message Monitoring
2009-09-08 15:31:22 Error Message could not be forwarded permantely to the JCA adapter. Reason: System error: MDM port not found
2009-09-08 15:31:22 Error Message could not be forwarded to the JCA adapter. Reason: Permanent error: Adapter call failed. Reason: com.sap.aii.af.lib.ra.cci.XIAdapterException: System error: MDM port not found
2009-09-08 15:31:22 Error Adapter Framework caught exception: System error: MDM port not found
2009-09-08 15:31:22 Error Delivering the message to the application using connection MDM_http://sap.com/xi/MDMAdapter failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.lib.ra.cci.XIAdapterException: System error: MDM port not found.
Is there an issue with our receiver communication channel and the MDM Access Parameters? We are using the Port code and Remote System code provided by the MDM team.
Anyone experience this same issue?

We are no longer seeing the MDM Port Not found error, but we are still seeing the UnknownServer error. Looking at RWB Message Monitoring it appears that the message is successfully sent to the MDM server, but nothing is coming into the Ready folder. Any ideas on where the message is going, and why it is not showing up in the Ready folder?
In RWB - Communication Channel Monitoring
MDM Adapter listener could not start due to: Can not create repository session '<server=XXXXXXXX serverUser=Admin repository=Product user=Admin>' caused by: Connection Failed: Cannot create connection to MDM Server 'XXXXXXXX' for one of the following reasons: (1) server does not exist, (2) server is not started, or (3) input/output problem while creating connection, error code: UnknownServer
In RWB - Message Monitoring
2009-09-11 14:04:15 Information The message was successfully received by the messaging system. Protocol: XI URL: http: //XXXXXXXX/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
2009-09-11 14:04:15 Information Using connection MDM_http ://sap.com/xi/MDMAdapter. Trying to put the message into the receive queue.
2009-09-11 14:04:15 Information Message successfully put into the queue.
2009-09-11 14:04:15 Information The message was successfully retrieved from the receive queue.
2009-09-11 14:04:15 Information The message status was set to DLNG.
2009-09-11 14:04:15 Information Delivering to channel: MDS_TEST_CC
2009-09-11 14:04:15 Information The message was successfully delivered to the application using connection MDM_http ://sap.com/xi/MDMAdapter.
2009-09-11 14:04:15 Information The message status was set to DLVD.
I thought the implementation of the MDM Adapter was suppose to be straightforward and simple
Edited by: Chris Williar on Sep 11, 2009 9:56 PM

ABAP Web service - Virtual Interface Not Found

Hi,
I have created a ABAP web service based on RFC. I changed the authentication to "Basic username/password" from SOAMANAGER. Also tested the web service from WSNAVIGATOR (of different portal) using WSDL url. Web service successfully returned response.
Now, I have a AJAX client where I have hardcoded the request (from wsnavigator) and trying to call this web service in SAP BW web template (from HTML/JavaScript). But its not giving error as "Virtual Interface Not Found". Also, i get 500 error. But the end point of the web service if looked up from browser gives response. The SICF service is active and upon tests gives valid response.
Found couple of discussions regarding this:
http://wiki.sdn.sap.com/wiki/display/VC/VirtualInterfacenotfounderror
But i'm not finding the setting to activate virtual interface in SE80. ALso, we have created many such web services and they used to work fine prior to upgrade to Ehp1 SP05 (BI) but the newly created web service is not working.
Any inputs?
Abhijeet

Hi can you please let me know how you resolved this issue?

Error: ConstraintColumn '20' not found.

I just recompliled a Flex 2.0 project using Flex 3. There
were not any errors or warning generated but when I try to run the
application I get this error message. I can't even find where it is
coming from in my code!!! What is up with this error message and
how do I find the cause so I can fix it???!!!
Error: ConstraintColumn '20' not found.
at
mx.containers.utilityClasses::CanvasLayout/applyAnchorStylesDuringUpdateDisplayList()[E:\ dev\3.0.x\frameworks\projects\framework\src\mx\containers\utilityClasses\CanvasLayout.as:5 37]
at
mx.containers.utilityClasses::CanvasLayout/updateDisplayList()[E:\dev\3.0.x\frameworks\pr ojects\framework\src\mx\containers\utilityClasses\CanvasLayout.as:280]
at
mx.containers::Canvas/updateDisplayList()[E:\dev\3.0.x\frameworks\projects\framework\src\ mx\containers\Canvas.as:363]
at
mx.core::UIComponent/validateDisplayList()[E:\dev\3.0.x\frameworks\projects\framework\src \mx\core\UIComponent.as:6214]
at
mx.core::Container/validateDisplayList()[E:\dev\3.0.x\frameworks\projects\framework\src\m x\core\Container.as:2675]
at
mx.managers::LayoutManager/validateDisplayList()[E:\dev\3.0.x\frameworks\projects\framewo rk\src\mx\managers\LayoutManager.as:602]
at
mx.managers::LayoutManager/doPhasedInstantiation()[E:\dev\3.0.x\frameworks\projects\frame work\src\mx\managers\LayoutManager.as:657]
at Function/
http://adobe.com/AS3/2006/builtin::apply()
at
mx.core::UIComponent/callLaterDispatcher2()[E:\dev\3.0.x\frameworks\projects\framework\sr c\mx\core\UIComponent.as:8460]
at
mx.core::UIComponent/callLaterDispatcher()[E:\dev\3.0.x\frameworks\projects\framework\src \mx\core\UIComponent.as:8403]
I have already tried to import the following libraries in an
effort to solve the problem... to no avail I might add... sigh...
import mx.containers.Canvas;
import mx.containers.utilityClasses.ConstraintColumn;
import mx.core.LayoutContainer;
import mx.core.Container;
import mx.core.UIComponent;
Thanks in advance for the help!!!
Have an Ordinary Day...
KomputerMan ~|:-)

Well first off, each interface and class should be in its own .java file.

CS4 internal error 11 Media not found, for menus?

Hi,
I have been attempting to burn blu ray with menus from the Encore Library. I keep getting an error when the motion menus are being rendered at the beginning of the disk build process. The error makes reference to the menu at hand and an "Internal Error 11" Media not found. I tried changing menus and I even tried leaving out the chapter selection menus so that there were no "animated buttons". I am not sure what to do, maybe Ill try reinstalling the encore library. I know that I have to go to bed for now and I will not have time to work with it until around 5pm.. Does anybody know what is going on here?
Windows 7 Pro
Intel i7 920 2.66Ghz
6Gb Triple Channel DDR3 1600mhz
ASUS P6T Motherboard
BFG inVidia geForce 260GTX OC
MOTU 896mk3 audio interface on a dedicated PCI-E 1394 card with TI Chipset
Delta 1010 PCI audio interface
LG 8X BluRay Internal Burner

Shouldn't be a library problem.
Did you apply many "corrections" to the project?
If yes, try to clear all the files kept in "AuthorScriptHDMVSessions" folder (your Encore project folder\"name of the project"\AuthorScriptHDMVSessions).
You can clear all the .xmp files in your Encore project folder.
When you'll re-run Encore, it will take more time to re-built missed files, but everything will be cleaner.
Hope this helps
Ciao
Giorgio

UI Error 'Method clone not found in class java.lang.Class'

When attempting to view an application window in the User Interface error I receive the error 'Method clone not found in class java.lang.Class'. The window will run correctly when I execute the application and other objects on the window are displayed correctly in the UI editor.
Within the window class I have used the following line of code to clone a reference list of values that is loaded just once when the application starts up: -
dsDefaultComboBoxModel priorityComboBoxModel = (dsDefaultComboBoxModel) dsReferenceLuLists.priorityComboBoxModel.clone();
And then this line of code to create a combo box: -
dsGuiComboBoxRefelu priorityComboBox = new dsGuiComboBoxRefelu(priorityComboBoxModel,ReportWindowSql.priorityCodeBuffer);
And then later on the combo box is displayed.
detailsArea.add(priorityComboBox, new XYConstraints(250,10,dsGlobalVariables.gvFieldWidthLarge,-1));
'dsDefaultComboBoxModel' is defined as follows: -
public class dsDefaultComboBoxModel extends DefaultComboBoxModel implements Cloneable
public dsDefaultComboBoxModel()
public Object clone()
try
return super.clone();
catch ( CloneNotSupportedException e )
// Shouldn't happen.
throw new InternalError( e.toString() );
This error occurs using the latest v903, but was also present in previous versions of JDeveloper.
At the moment this means that I did to execute the window in order to see all of the GUI elements that are displayed. As on option I could use something other than the clone method, but it seems to be such a nice way of copying the static reference lists.
Thanks for any help.

Hi Darren,
My guess is that since DefaultComboBoxModel doesn't implement Cloneable, you can't call super.clone(). Does your code compile?
Later.
Dennis

Hp 5535 will not scan, error message printer not found

I have a HP Envy 5535. I have only been able to scan one time with it. I scanned 22 documents, after running HP Scan Doc 4.4. Each time the HP Scan Doc states that everything is OK, yet as soon as I try to do even a test scan, I get the error message "Printer not found." I have also tried to run this scan with my McAfee virus firewall off, and it still doesn't work. I have also identified it on McAfee as part of my network.
This question was solved.
View Solution.

Hi @prazdancr,
Welcome to the HP Forums!
I am sorry that you cannot scan with your HP Envy 5535, but I am happy to help!
For further assistance I will need to know:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, or USB.
If the printer is able to make copies by itself.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
In the meantime, please try going through this scanning guide. A 'The computer is not responding' Error Message Displays During Scanning.
Hope to hear from you soon, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

I want to add refworks grabit to my tool bar, when I try to install for firefox it won' t let me this is what I get: HTTP Error 404.3 - Not Found The page you a

this is the complete error I get. I just installed firefox so that I can use this feature and now it is useless.
Error Summary
HTTP Error 404.3 - Not Found
The page you are requesting cannot be served because of the extension configuration. If the page is a script, add a handler. If the file should be downloaded, add a MIME map.
Detailed Error Information
Module StaticFileModule
Notification ExecuteRequestHandler
Handler StaticFile
Error Code 0x80070032
Requested URL http://www.refworks.com:80/refgrabit/install.xpi
Physical Path E:\RefGrabIt\install.xpi
Logon Method Anonymous
Logon User Anonymous
Failed Request Tracing Log Directory C:\inetpub\logs\FailedReqLogFiles
Most likely causes:
It is possible that a handler mapping is missing. By default, the static file handler processes all content.
The feature you are trying to use may not be installed.
The appropriate MIME map is not enabled for the Web site or application. (Warning: Do not create a MIME map for content that users should not download, such as .ASPX pages or .config files.)
If ASP.NET is not installed.
Things you can try:
In system.webServer/handlers:
Ensure that the expected handler for the current page is mapped.
Pay extra attention to preconditions (for example, runtimeVersion, pipelineMode, bitness) and compare them to the settings for your application pool.
Pay extra attention to typographical errors in the expected handler line.
Please verify that the feature you are trying to use is installed.
Verify that the MIME map is enabled or add the MIME map for the Web site using the command-line tool appcmd.exe.
To set a MIME type, use the following syntax: %SystemRoot%\windows\system32\inetsrv\appcmd set config /section:staticContent /+[fileExtension='string',mimeType='string']
The variable fileExtension string is the file name extension and the variable mimeType string is the file type description.
For example, to add a MIME map for a file which has the extension ".xyz": appcmd set config /section:staticContent /+[fileExtension='.xyz',mimeType='text/plain']
Warning: Ensure that this MIME mapping is needed for your Web server before adding it to the list. Configuration files such as .CONFIG or dynamic scripting pages such as .ASP or .ASPX, should not be downloaded directly and should always be processed through a handler. Other files such as database files or those used to store configuration, like .XML or .MDF, are sometimes used to store configuration information. Determine if clients can download these file types before enabling them.
Install ASP.NET.
Create a tracing rule to track failed requests for this HTTP status code. For more information about creating a tracing rule for failed requests, click here.
Links and More Information This error occurs when the file extension of the requested URL is for a MIME type that is not configured on the server. You can add a MIME type for the file extension for files that are not dynamic scripting pages, database, or configuration files. Process those file types using a handler. You should not allows direct downloads of dynamic scripting pages, database or configuration files.
View more information »

That file might have moved to a different location on the server. I think you'll need to check with RefWorks support or your local IT department on why the install page links do not work.

Error 7: File not found occurs in 8.2 from transition of 4.1. Specifying the file in file dialog returns error although file is in the directory.

Copied a program from 4.1 to 8.2 recently and receive an error 7: File not found at open file+.vi. The program is built so a file dialog will pop up and ask for the destination of the file. Eventhough there is a file in the specified directory, an error is returned. Running open file+.vi by itself returns no error with the same file designation. Any clues?

noviceak,
Welcome to the NI Discussion Forums.
I created a quick VI in LabVIEW 4.1 that displays a file dialog and then passes that file path to "Read Characters from File.vi" (which in turn calls Open File+.vi). I then opened this file in LabVIEW 8.2 and ran it successfully (see code screenshot below).
When you say there is a file in the specified directory are you using the file dialog to browse to the directory or to select the specific file? Open File+.vi expects the path to a file rather than a directory - that is C:\folder\file.txt rather than C:\folder. You might also want to create an indicator or probe to see what path is being passed to Open File+ to ensure it is what you expect.
I feel like I should also say that in the days (years) inbetween LabVIEW 4.1 and 8.2 the file operation VIs have changed significantly. While the old Open File+.vi still lives in vi.lib for compatibility purposes we no longer recommend using it for new applications.
I hope this helps and again, welcome to the community.
Regards,
Simon H
Applications Engineer
National Instruments
http://www.ni.com/support/
Message Edited by Simon H on 01-18-2007 08:01 PM
Message Edited by Simon H on 01-18-2007 08:03 PM
Attachments:
LV4 File Dialog.png ‏3 KB

Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a reso

Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a resolution. Any help would be appreciated.
Sorry for the long title, first time poster here.

This thread is pretty old, are you still having this issue?

Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND FOR object CC...

Hi All,
My user is geting the ERROR while running the actual OH calculation through CJ45 as below:
Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND FOR object
Message NO k5011.
As this is more ralaing to the costing sheet, this refers to controlling module.
We have verfied the Note 515426, but the correction were delivered in 4.7 itself. My client is using the 6.0 verion.
Can anybody suggest the reason for the above error.
Thanks & Regards
Shankar

HI,
whats the message class, message number?
BR Christian

Error "Run-Time Error '76' PAth Not Found" in XML Publisher Desktop

Hi All,
we are trying to preview the PDF output in the XML Publisher Desktop Application.
We are able to LOAD the data successfully.
But whenever we try to preview the output, we are getting an error saying "Run-Time Error '76' Path Not Found".
We are using the XMLP Desktop application on the Client Machine.(Citrix)
Can anybody help us in this regard?
Thanks,
Sachin.

Hi.
You are posting in the wrong forum.
Please post to the BI Publisher Forum:
BI Publisher

Itunes install error message - program not found ...x64/difxinst64.exe

itunes install error message - program not found ...x64/difxinst64.exe
no problems with ITunes on Dell Inspiron Windows 7 until yesterday. ITunes version 11.0.2. iphone won't connect stating required software is not installed. uninstall and install 64 bit version of iTunes. I have 64 bit version already. I have uninstalled and reinstalled 5 times already. When re-installing ITunes get error message c:\programdata\34be82c4-e596-4e99-a191-52c6199ebf6\x64\difxinst64.exe. file does not have a program associated with it for performing this action. please install or create an association in the Default Programs control panel. iTunes install continues after the difxinst64.exe error message but then get the iphone cannot be used error message again. therefore, I can't sync my iphone with iTunes until I figure this out.
can't win for losing. had iTunes on my windows 7 laptop for 4 years. first time I've ever encountered this.

I am a PC Tech and had a customer with this issue. Ran across this post in my search and ended up finding the solution on my own. The problem isn't with the iTunes software but the installer for the GEARAspi drivers. Really the issues is with the file type asssociations in the windows registry. On the system I was working on the HKCR key for .exe should point to the exefile key but pointed to nothing. To fix it create a new txt document and paste the following in (only paste what is in between the [code][/code] tags):
[code]
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\.exe]
@="exefile"
"Content Type"="application/x-msdownload"
[HKEY_CLASSES_ROOT\.exe\PersistentHandler]
@="{098f2470-bae0-11cd-b579-08002b30bfeb}"
[/code]
Now change the extension from .txt to .reg. Then right click and select merge. iTunes should now install properly.

Error ,Field catalog not found while doing billing with DP90

Dear Guru's
while doing billing with DP90 transaction code.i have given service order no xxxx and execute.Then i received the below error
Field catalog not found , Message no. 0K530.Kindly help me in solving the issue.
Thank u
S Babu

hi naga suribabu,
I am also facing same issue. can you please help, where to check the configuration for this issue

Error 1045: Interface Not Found

Similar Messages

Maybe you are looking for