Error 1047 with LV 7 and Matlab 7

I am getting error 1047 when I add an input to the Matlab script node. I have:
-installed the new script,
-openned Matlab first then LV
however I still get error 1047. I have attached my small program. I'd appreciate a reply! Thank-you!
Ivanka
Attachments:
July_5-04-learning.vi ‏19 KB

IBAHKA wrote:
> I am getting error 1047 when I add an input to the Matlab script node.
> I have:
> -installed the new script,
> -openned Matlab first then LV
> however I still get error 1047. I have attached my small program.
> I'd appreciate a reply! Thank-you!
Check on NI's site for a patch. Matlab changes the Active X registry
with each new version and the Matlab script node explicitedly loads the
Acitve X interface by GUID. Of course NI can not guess at the next GUID
used by Matlab so they can only support released Matlab versions at the
time when they release a LabVIEW version. They usually release a new
matlab script interface DLL to replace the old one with, shortly after
Matlab releases a new version so it should be available by now I would
guess.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Similar Messages

I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

Have you recharge the battery for at least 2 hours, or just leave it connected for 4 hours?
(When you replaced the Hardisk, you should also replace the battery.)
Some other iPod SSD sites, says that you may have to format the CF in FAT32, as Mac dont read NTFS drive so if Windows is the 1st PC that your CF is connected, it may be formatted to NTFS.
You can try erasing the CF using Disk Utilty, so that Mac can recognise it. (but not Windows)
Have a nice day!

Blank error message with ? appears and PDF does not open in Browser (IE11) when clicking link to open pdf. PC - IE11 Acrobat 9.0

Blank error message with ? appears and PDF does not open in Browser (IE11) when clicking link to open pdf. PC - IE11 Acrobat 9.0
Cannot access in browser PDF files unless blank box is closed and then website address is clicked on again in browser address bar and page reloaded.
Uninstalled Acrobat 9, reinstalled, still same problem.
Help please!

Yes I can it only happens in the browser..
I reinstalled Windows on my machine and started over a couple of weeks ago.
When my desktop started up I didn’t have Acrobat installed and clicked on a pdf file and the open with xxx dialogue box came open.
I chose a different program as Acrobat wasn’t installed yet so it associated pdf files with another program.
Later Installed Acrobat and couldn’t associate the pdf file with acrobat so I went into Folder Options and manually associated PDF files with Acrobat.
Ever since then I get the error when something is downloaded and opened in the browser.
Works fine everywhere else and when I cancel the blank error, highlight the web address and press enter to reload it works 90% of the time.
Not sure what to do..

Hi there i have ipod touch 2nd gen and i am tryna restore it but i get error 21 with orginal fireware and 1601 with custom fireware and when it connected to itunes and i try to boot it up by restoring it white screen with lines thorugh it

hi there i ahve ipod touch 2nd gen and i am tryna restore it but get error 21 with orginal fireware and 1601 with custom firewarw and when connected it to itunes and i try to boot it by resotring it white screen with lines through it

Those errors are covered here:
http://support.apple.com/kb/TS3694

Ghost32 image on my X61s = error message with winload.exe and 0xc000000f

hi
scuse my poor english.
i have a deployment to do with 200 notebooks : r61 & x61s.
i create a WDS server with a boot.wim and a Ghost Solution Suite Server 2.5 with images of R61 & X61s on the same server 2003.
i start my R61, boot on the F12, start WinPE, install the ghost image through the network, reboot the notebook and vista run normally, good.
i start my X61s, boot on the F12, start WinPE, install the ghost image through the network, reboot the notebooks and i have a BOSD, a reboot, and this message : Windows\System32\winload.exe is crupt or missing, Status error : 0xc000000f.
i try to repair with the vista dvd, bcdedit, /fixboot, /fixmbr, /rebuildbcd,... : same error
i try with a new ghost image, same BOSD and error
i try to install the ghost image since a USB hard disk, same BOSD and error
perhaps there is a problem with the hardware of X61s ?
thanks a lot for your responses !
Message Edited by freenod on 08-21-2008 01:26 PM
Message Edited by freenod on 08-21-2008 01:26 PM
Message Edited by freenod on 08-22-2008 07:15 AM

thanks for your response.
i have to do a deployment with 200 notebooks for a Business School.
the administrator of the Business School use a Vista Business OEM version for all the notebooks, R61 and X61s.
they give to me a R61 and a x61s with Vista and a lot of softs installed.
my job is to clone this two models and deploy the ghost image on the 198 others R61 and X61s :]
on the disk there is two partitions : in first one IBM partition hidden, in second one Vista partition.
i clone the entire disk of R61 with ghost solution suite 2.5 and my clone works perfectly with the R61.
i clone the entire disk of X61s with ghost solution suite 2.5 and my clone give me a BSOD and a reboot.
have you an idea ?
thanks
Message Edited by freenod on 08-22-2008 07:16 AM

Error 1202 with iTunes Store and Windows Vista

When I try to redeem music on iTunes Store, or access my account, etc. I receive "We could not complete your iTunes Store request. An unknown error occurred (-1202).
I have read many similar posts and tried many fixes (checked time/date on my computer, made sure LAN proxy settings is unchecked, turned off my Norton firewall, tried to access iTunes Store in safe mode, etc.). None of these worked. Please help as we would like to purchase music from the iTunes store and have done so successfully in the past on this computer.

This problem is related to having your computer, Apple device, etc
(from your current physical location) being unable to resolve/connect to
the following site/domain names and their related IP address(s).
The following table is presented to help explain/clarify this issue:
Site/Domain name | IP Address
phobos.apple.com | 17.250.237.43
deimos3.apple.com | 206.169.246.144
albert.apple.com | 17.149.240.64
gs.apple.com | 17.151.36.30
itunes.apple.com | 206.169.246.171
ax.itunes.apple.com | 206.169.246.139
If ANY of these sites/IP address are unresolvable (via PING for example)
then the ability/usability of Apple's iTunes (and the Store) will suffer.
To have yourself verify that (if) you can connect to these sites, you'll
need to open up a MSDOS/Command prompt window
and then type "ping" (without the quotes) and one of the (above) listed sites.
For example you would type the following at your command prompt:
ping phobos.apple.com (then press the return/enter key)
which (should) give you results like this:
pinging phobos.apple.com.akadns.net http://17.250.237.43 with 32 bytes of data:
Note: Anyt response other than "reply" (like Request timed out)
indicates a problem resolving the site's name to an IP address
and (generally) has NOTHING to do with your (normally functioning) computer
as this is dependent on the ISP (Internet Service Provider) that you are
using to connect to the Internet (like Sprint, Insightbb, etc) with.
The 'key' here is that it's the ISP's responsibility to (properly) resolve
the site's name to (one or more of) Apple's sites.
If (however) Apple (itself) is (currently) experiencing a DDOS attack
(Distributed Denial Of Service) upon one (or more) of it's sites, then THAT
would explain a possible cause of the problem.
However I stress THAT is NOT the problem since I can connect from my Insightbb
(ISP provider) at home but (currently) can not connect at work via their ISP.
This is (also) WHY the "tag" of the FQDNSN (Fully-Qualified DNS Name)
is listed as http://akadns.net since that is the ISP/Router resolving the DNS name!
I hope that this has helped shed some light as to WHo's problem this REALLY is,
and will help to stop the Apple-User 'finger-pointing' game in it's tracks!
Your's The Lan_Man!
William Cull
Technology Specialist
University of Louisville

Sycn error -50 with iTunes 5 and iPod Photo 60G

Hello,
I updated to iTunes 5 (german) on a W2K SP4. The first sync with my iPod Photo was fine. Now I synced again and received error: It was not possible to syncronize your iPod. An unkown error occured (-50).
After that I updated my iPod to latest iPod Updater 2005-09-06, but still get the same error.
Anyhow it seems that the sync still work. At least for renaming playlists.
Can anybody help?
Thanks a lot,
Tim

Hi Tim,
you might want to restore your iPod completely using the Updater 2006-09-06. Even though it's a hassle, but I had some cover art mess on the iPod, but not in iTunes. So I restored with Updater and after that the syncing worked fine and ever since.
Hope that'll help!
Best
Roman

Disco Viewer/+/Admin/Desktop errors out with Invalid Username and Password

Hi All,
We have set up a demo environment at work to upgrade to R12 with Vision database. Discoverer Admin is patched to this level: 10.1.2.2 (Path#4960210) with EBS patch 5985072. The iAS on linux box which is running Discoverer server is patched with same 10.1.2.2 as well. So client and server are at the same level. I followed Note 373634.1 - Using Discoverer 10.1.2 with Oracle E-Business Suite Release 12 to integrate Discoverer 10.1.2 with E-Business Suite Release 12 and copied over vis.dbc file to the client (C:\oracle\BIToolHome_01\secure) and also copied the same file to $BI_ORACLE_HOME/discoverer/secure folders. So far so good. I can connect to disco plus/admin/desktop using sysadmin or any other users shipped out of box with R12 VIS instance. A default apps EUL_US exist with some business area and workbooks. I can run them without any issues.
My problem is any FND users that I create cannot login via Plus/desktop/admin. I get the error username/password is invalid. I can login with this newly created user to apps no problem. I can see this user in discoverer when logged in as SYSADMIN and I granted all the privileges(admin as well) necessary. Also, any user shipped in VIS instance if updated (password changed or responsibility added) stops working and throws the same error.
What could be going wrong ?
I did look at this thread and have done all that is suggested by Michael and Rod west.
Discoverer Plus Login Failed
Thanks
Bismi

Hi,
Check whether there are any signon system profile options set. For example, case sensitive passwords set in the system profiles can cause a problem because Discoverer does not support them.
Also try doing a connection trace on Discoverer Desktop to see how far the connection attempt progresses. Follow Metalink Note 329898.1 for instructions.
Rod West

XA error XAER_RMERR with wls6.1 and weblogic XA driver

This error develops quickly in our designed simple test with these settings:
1) wlserver6.1 on Ultra 10 with Solaris 8;
2) XA datasource on another Ultra 10 with Oracle 8i;
3) Weblogic XA Oracle Driver;
4) Simulated 50 clients from Windows 2000 IE using Microsoft Web Stress test
suite;
5) BMT session bean;
6) Data base contains a simple table with two colomns, name and password.
7) The test business logic is to get and return the password string, could
not be simpler.
The Processing logic(high level) is as follows:
A) get UserTransaction, and begin transaction;
B) loop(30 times):
1) get connection
2) create statement
3) execute statement
4) close result set
5) close statement
6) close connection
C) commit/rollback the tx accordingly.
Note that:
1) the 50 simulated clients will generate repeated hits to stress the
server.
2) We changed to use "thin" driver, giving up the XA capability, and the
tests run OK. However, XA is what we absolutely require of. So please help
identify this problem. It needed, the complete sample code can be made
available.
Thanks.
Here comes the exception dump:
java.sql.SQLException: XA error: XAER_RMERR : A resource manager error has
occured in the transaction branch start() failed on resource
'weblogic.jdbc.jta.DataSource' start failed for XAResource 'branchoutPool'
with error XAER_RMERR : A resource manager error has occured in the
transaction branch at
weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1113) at
weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1079) at
weblogic.jdbc.jta.Connection.getXAConn(Connection.java:148) at
weblogic.jdbc.jta.Connection.createStatement(Connection.java:229) at
weblogic.jdbc.rmi.internal.ConnectionImpl.createStatement(ConnectionImpl.jav
a:126) at
weblogic.jdbc.rmi.SerialConnection.createStatement(SerialConnection.java:56)
at simpleEJB.SimpleEJB.hitdb(SimpleEJB.java:57) at
simpleEJB.SimpleEJB_1zpe51_EOImpl.hitdb(SimpleEJB_1zpe51_EOImpl.java:79) at
simpleEJB.SimpleEJB_1zpe51_EOImpl_WLSkel.invoke(Unknown Source) at
weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298) at
weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java
:93) at
weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267)
at weblogic.rmi.internal.BasicServerRef.dispatch(BasicServerRef.java:166) at
weblogic.rmi.internal.ServerRequest.sendOneWayRaw(ServerRequest.java:92) at
weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:112) at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java
:262) at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java
:229) at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:35) at
$Proxy83.hitdb(Unknown Source) at
simpleUI.SimpleProxy.hitdb(SimpleProxy.java:31) at
jsp_servlet.__simple._jspService(__simple.java:95) at
weblogic.servlet.jsp.JspBase.service(JspBase.java:27) at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:265) at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:304) at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:200) at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
ntext.java:2495) at
weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
:2204) at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139) at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

hi!
I´m facing the same problem with a similiar configuration.
Pool is large enough for an elephant! (:>))
Any other hints?
regards,
Pesca
"Richard Wallace" <[email protected]> escreveu na mensagem
news:[email protected]...
>
Hi,
What connection pool settings do you have? I assume you have enoughconnections
for this test?
Regards,
Richard Wallace
Senior Developer Relations Engineer
BEA Support.
"Yuming Liu" <[email protected]> wrote:
This error develops quickly in our designed simple test with these
settings:
>>
1) wlserver6.1 on Ultra 10 with Solaris 8;
2) XA datasource on another Ultra 10 with Oracle 8i;
3) Weblogic XA Oracle Driver;
4) Simulated 50 clients from Windows 2000 IE using Microsoft Web Stress
test
suite;
5) BMT session bean;
6) Data base contains a simple table with two colomns, name and password.
7) The test business logic is to get and return the password string,
could
not be simpler.
The Processing logic(high level) is as follows:
A) get UserTransaction, and begin transaction;
B) loop(30 times):
1) get connection
2) create statement
3) execute statement
4) close result set
5) close statement
6) close connection
C) commit/rollback the tx accordingly.
Note that:
1) the 50 simulated clients will generate repeated hits to stress the
server.
2) We changed to use "thin" driver, giving up the XA capability, and
the
tests run OK. However, XA is what we absolutely require of. So please
help
identify this problem. It needed, the complete sample code can be made
available.
Thanks.
Here comes the exception dump:
java.sql.SQLException: XA error: XAER_RMERR : A resource manager error
has
occured in the transaction branch start() failed on resource
'weblogic.jdbc.jta.DataSource' start failed for XAResource'branchoutPool'
with error XAER_RMERR : A resource manager error has occured in the
transaction branch at
weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1113) at
weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1079)
at
weblogic.jdbc.jta.Connection.getXAConn(Connection.java:148) at
weblogic.jdbc.jta.Connection.createStatement(Connection.java:229) atweblogic.jdbc.rmi.internal.ConnectionImpl.createStatement(ConnectionImpl.jav
a:126) atweblogic.jdbc.rmi.SerialConnection.createStatement(SerialConnection.java:56)
at simpleEJB.SimpleEJB.hitdb(SimpleEJB.java:57) at
simpleEJB.SimpleEJB_1zpe51_EOImpl.hitdb(SimpleEJB_1zpe51_EOImpl.java:79)
at
simpleEJB.SimpleEJB_1zpe51_EOImpl_WLSkel.invoke(Unknown Source) at
weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
atweblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java
:93) atweblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267)
at weblogic.rmi.internal.BasicServerRef.dispatch(BasicServerRef.java:166)
at
weblogic.rmi.internal.ServerRequest.sendOneWayRaw(ServerRequest.java:92)
at
weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:112)
atweblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java
:262) atweblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java
:229) at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:35) at
$Proxy83.hitdb(Unknown Source) at
simpleUI.SimpleProxy.hitdb(SimpleProxy.java:31) at
jsp_servlet.__simple._jspService(__simple.java:95) at
weblogic.servlet.jsp.JspBase.service(JspBase.java:27) atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:265) atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:304) atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:200) atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
ntext.java:2495) atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
:2204) at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

Error -1074118625 with PXI-4071 and PXI-2527

When using the LabVIEW IVI drivers for PXI-4071 and PXI-2527, I receive an error -1074118625 in TestStand. The sequence initializes the MUX, init DMM, connects the MUX, waits for debounce, and then upon reading from the DMM, I receive this error.
Error: niDMM Read Waveform (waveform data).viExplanation could not be found for the requested status code.
Verify that the requested status code is correct.
[Error Code: -1074118625, User-defined error code.]
This sequence of events is successfully used multiple times elsewhere in the TestStand. This error does not appear in any knowledgebase article nor in any help. Any explanation would be greatly appreciated.
Solved!
Go to Solution.

I found this with google that seems like it might apply:
http://digital.ni.com/public.nsf/allkb/A593DEBFD86A69C68625727900748EEC

My error message with external iSight and iChat

So I am travelling for work and am at a very nice hotel in Houston. Good ethernet high speed internet.
My wife is in Germany at an Army base, other people are using Skype and chatting with people and we can't get our webcams OR audio working.
This is the error I get on my end:
Date/Time: 2007-09-16 01:18:29.935 -0500
OS Version: 10.4.10 (Build 8R218)
Report Version: 4
iChat Connection Log:
AVChat started with ID 917914215.
halcyonseven9: State change from AVChatNoState to AVChatStateWaiting.
0x9c12d40: State change from AVChatNoState to AVChatStateInvited.
0x9c12d40: State change from AVChatStateInvited to AVChatStateConnecting.
halcyonseven9: State change from AVChatStateWaiting to AVChatStateConnecting.
halcyonseven9: State change from AVChatStateConnecting to AVChatStateEnded.
Chat ended with error -8
0x9c12d40: State change from AVChatStateConnecting to AVChatStateEnded.
Chat ended with error -8
Video Conference Error Report:
4.011411 @:0 type=4 (00000000/22)
[VCSIP_INVITEERROR]
[19]
4.011291 @SIP/SIP.c:2447 type=4 (900A0015/22)
[SIPConnectIPPort failed]
2.009767 @SIP/SIP.c:2447 type=4 (900A0015/22)
[SIPConnectIPPort failed]
Video Conference Support Report:
3.511182 @SIP/Transport.c:1218 type=1 (00000000/0)
[INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 192.168.9.13;branch=z9hG4bK70de6eb8244f18f9
Max-Forwards: 70
To: "u0" <sip:[email protected]>
From: "halcyonseven9" <sip:[email protected]>;tag=741423744
Call-ID: 9c321996-641c-11dc-a53c-b8bc810913c4@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 546
v=0
o=stephenmiller 0 0 IN IP4 192.168.9.13
s=halcyonseven9
c=IN IP4 192.168.9.13
b=AS:2147483647
t=0 0
a=hwi:70:1:1666
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtcp:16387
a=rtpmap:3 GSM/8000/1
a=rtpmap:0 PCMU/8000/1
a=rtpID:-705006232
m=video 16384 RTP/AVP 126 34
a=rtcp:16385
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 30:160:120:160:120
a=rtpID:-428504944
2.510859 @SIP/Transport.c:1218 type=1 (00000000/0)
[INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 192.168.9.13;branch=z9hG4bK70de6eb8244f18f9
Max-Forwards: 70
To: "u0" <sip:[email protected]>
From: "halcyonseven9" <sip:[email protected]>;tag=741423744
Call-ID: 9c321996-641c-11dc-a53c-b8bc810913c4@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 546
v=0
o=stephenmiller 0 0 IN IP4 192.168.9.13
s=halcyonseven9
c=IN IP4 192.168.9.13
b=AS:2147483647
t=0 0
a=hwi:70:1:1666
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtcp:16387
a=rtpmap:3 GSM/8000/1
a=rtpmap:0 PCMU/8000/1
a=rtpID:-705006232
m=video 16384 RTP/AVP 126 34
a=rtcp:16385
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 30:160:120:160:120
a=rtpID:-428504944
2.010577 @SIP/Transport.c:1218 type=1 (00000000/0)
[INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 192.168.9.13;branch=z9hG4bK70de6eb8244f18f9
Max-Forwards: 70
To: "u0" <sip:[email protected]>
From: "halcyonseven9" <sip:[email protected]>;tag=741423744
Call-ID: 9c321996-641c-11dc-a53c-b8bc810913c4@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 546
v=0
o=stephenmiller 0 0 IN IP4 192.168.9.13
s=halcyonseven9
c=IN IP4 192.168.9.13
b=AS:2147483647
t=0 0
a=hwi:70:1:1666
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtcp:16387
a=rtpmap:3 GSM/8000/1
a=rtpmap:0 PCMU/8000/1
a=rtpID:-705006232
m=video 16384 RTP/AVP 126 34
a=rtcp:16385
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 30:160:120:160:120
a=rtpID:-428504944
1.503932 @SIP/Transport.c:1218 type=1 (00000000/0)
[INVITE sip:[email protected]:33929 SIP/2.0
Via: SIP/2.0/UDP m.0;branch=z9hG4bK29327bdf55d370b3
Max-Forwards: 70
To: "u0" <sip:[email protected]:33929>
From: "halcyonseven9" <sip:[email protected]>;tag=1108672474
Call-ID: 9affc0c8-641c-11dc-a53c-8740a2f713c4@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 548
v=0
o=stephenmiller 0 0 IN IP4 m.0
s=halcyonseven9
c=IN IP4 m.0
b=AS:2147483647
t=0 0
a=hwi:70:1:1666
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtcp:16387
a=rtpmap:3 GSM/8000/1
a=rtpmap:0 PCMU/8000/1
a=rtpID:-705006232
m=video 16384 RTP/AVP 126 34
a=rtcp:16385
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 30:160:120:160:120
a=rtpID:-428504944
0.503597 @SIP/Transport.c:1218 type=1 (00000000/0)
[INVITE sip:[email protected]:33929 SIP/2.0
Via: SIP/2.0/UDP m.0;branch=z9hG4bK29327bdf55d370b3
Max-Forwards: 70
To: "u0" <sip:[email protected]:33929>
From: "halcyonseven9" <sip:[email protected]>;tag=1108672474
Call-ID: 9affc0c8-641c-11dc-a53c-8740a2f713c4@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 548
v=0
o=stephenmiller 0 0 IN IP4 m.0
s=halcyonseven9
c=IN IP4 m.0
b=AS:2147483647
t=0 0
a=hwi:70:1:1666
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtcp:16387
a=rtpmap:3 GSM/8000/1
a=rtpmap:0 PCMU/8000/1
a=rtpID:-705006232
m=video 16384 RTP/AVP 126 34
a=rtcp:16385
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 30:160:120:160:120
a=rtpID:-428504944
0.003329 @SIP/Transport.c:1218 type=1 (00000000/0)
[INVITE sip:[email protected]:33929 SIP/2.0
Via: SIP/2.0/UDP m.0;branch=z9hG4bK29327bdf55d370b3
Max-Forwards: 70
To: "u0" <sip:[email protected]:33929>
From: "halcyonseven9" <sip:[email protected]>;tag=1108672474
Call-ID: 9affc0c8-641c-11dc-a53c-8740a2f713c4@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 548
v=0
o=stephenmiller 0 0 IN IP4 m.0
s=halcyonseven9
c=IN IP4 m.0
b=AS:2147483647
t=0 0
a=hwi:70:1:1666
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtcp:16387
a=rtpmap:3 GSM/8000/1
a=rtpmap:0 PCMU/8000/1
a=rtpID:-705006232
m=video 16384 RTP/AVP 126 34
a=rtcp:16385
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 30:160:120:160:120
a=rtpID:-428504944
0.000000 @:0 type=2 (00000000/22)
[VCVIDEO_OUTGOINGATTEMPT]
[4]
Does anyone have any ideas that could help us? I am having her download skype to see if thats more successful but this is going to be our primary mode of contact for the next year and I am REALLY worried. We are both using external iSights and we tried audio with and without them plugged in.
Everytime either of us tries anything it gets the the stage where it says "connecting" then gives the error message.
Any help would be really appreciated!
Thanks,
Stephen Miller

Hi,
Hotels are notoriously difficult for iChat because of the way
1) the ports are not always open
2) the number of people sharing the connection.
For Mail you probably have POP and SMTP server set for one location and the hotel's ISP is not letting you go to those though their server. Web Mail may be the only way around this.
Ask the hotel if they have the ports open for iChat.
You may not be able to do much about the Bandwidth/user issue.
I take it you have done the Quicktime setting as you have posted before.
10:15 PM Sunday; September 16, 2007

Airport express error (Muted) with youtube, shoutcast and with tplink router

Hi!
My problem is:
I have an airport express 802.1g
Its wired to a tplink router . The airport's wifi is disabled.
1. Iam playing a youtube video. When its finised and i would like watch another one, the sound is not working anymore util i reboot the airport.
2. similar with shoutcast. If the stream disconnect, after reconnect there is no sound on speakers.
Iam using a tplink router and my ipad /iphone is connecting to the router's wifi. The router is wired to airport express.
Thanks for help:
Kavics

Unfortunately, if you are trying to use the Express to extend the Sitecom router's signal...using wireless only....the Express is very likely not compatible for that purpose.
The Express can extend a signal from another Apple router....but it would be extremely unlikely that this would work with a router from another manufacturer.
If you have tried this a number of times and always get an error message....I am afraid that you have your answer.

Error 6742 with AirPort Express and Time Capsule

Hi all,
I have an AirPort Express from 2009 and a Time Capsule from 2010. I always use my Time Capsule to join to my existing network and stream my external hard drive across my house.
Yesterday our IP router died (Virgin Media) and we are not getting a new one until Saturday the earliest... So I thought oooo I have an Airport Express spare and a Time Capsule we could use.
However when I try to connect both of them to the modem all I get is error 6742. When I have searched for this people are suggesting the hardware has died, well my Time Capsule was definitely alive and well when I tried to set it up against the modem as it was streaming my external drive. My Express, well maybe, it has been in a cupboard for a few years...
Does anyone have any ideas what I could do to set this up? I have tried a reset and a factory reset on both units.
Thanks

What broadband type do you have?
It can be impossible to plug a TC into the existing connection because the virgin media router has special setup or logins which are not revealed to end users.
If it is a fibre connection for instance the TC may simply not work. They have issues with many fibre ISP putting the gateway address outside the subnet of the main public IP.. (don't worry if it is too technical .. it amounts to .. it don't work! )
You may need to wait until Sat.
Get in a big supply of home videos or something and try and starve off your addiction.

Error scanning with PSC 2575 and 10.5.7

Since upgrading to 10.5.7 I get an error when trying to scan. The PSC-2575 is connected via USB.
The error message is "sorry, scanner could not be initialized" .
I tried uninstalling the software and re-installing, but the problem persists. There is no HP software available.
FYI - I can print ok, just not scan.
Any ideas?

Hey there,
Here is a potential solution. Worth a shot.
http://www.ellert.se/twain-sane/
You have to install a few packages but it may solve the problem. Hope it helps.
B-rock

Error message with forms 6i and OAS

Hello,
I 'm executing an applet (forms6i&OAS), while executing http://mycomputer:8001/web_html/mybase
i have the error:
keyconfailbundle oracle.forms.engine
runformbundle exception
java.lang.illegal argument exception: unknown format type...
can u please help
thnaks in advance
the applet code is the following
<HTML>
<HEAD><TITLET>titlz</TITLE></HEAD>
<BODY >
<APPLET CODEBASE="/web_frms/"
CODE="oracle.forms.engine.Main"
ARCHIVE="f60all.jar"
WIDTH="750"
HEIGHT="700">
<PARAM NAME="serverPort" VALUE="9000">
<PARAM NAME="serverHost" VALUE="mycomputer">
<PARAM NAME="serverArgs"
VALUE="module=d:\Direc\pic userid=scott/tiger@inter">
</APPLET>
</BODY>
</HTML>

You will need to startup the database before you can run any sql command.

Error 1047 with LV 7 and Matlab 7

Similar Messages

Maybe you are looking for