Error 105, Could not read full block (2048 bytes) from checkpoint file ~/dirchk/sdfsdj.cpe

Hi expert,
i am getting below error in goldengate due to mount point full and i released the space and still the same error for all gg processes. i can see the *cpe cpr file become 0 bytes. so i deleted and re added the extract and repliacat and while adding the replcat i used add replicat checkpoint table because of that multiple entries of same replicat came in checkpoint table . my checkpoint details also present in ./GLOBALS. now my doubt is if add replicate with mentioning checkpoint table name will duplicate entry will be created or what is the work around for this.
MANAGER RUNNING
Invalid checkpoint for EXTRACT qqqq (error 105, Could not read full block (2048 bytes) from checkpoint file XXXXXXXXX)
Invalid checkpoint for EXTRACT qqq(error 105, Could not read full block (2048 bytes) from checkpoint file XXXXXXXXXX)
Invalid checkpoint for REPLICAT qqq (error 105, Could not read full block (2048 bytes) from checkpoint file XXXXXXXXXXX)

Hi Kariyath
Increase the page size of your windows machine.Check for the recommanded page size.Remember that the recommanded page size should be the lower limit.If you have any issue feel free to ask.Your prob will be solved
Award suitable points

Similar Messages

Could not read boot block (input/output errror) powerbook g4

Hello
My friend gave me a powerbook g4 and a copy of osx lion, I would like to install it but the internal hardive is not available within the "select Destination" area of the installation process. I tried to repair the disk which is labelled Disk0s1, but shortly after it is underway i recieve this message.
**/dev/disk0s1 could not read boot block (input/output error) Error: The underlying task reported failure on exit. 1 non HFS volume checked, 1 volume could not be repaired because of an error.
Within disk utilities the Disk01s is grey, I can try to repair it but the above error occurs. Do you know what the problem is and how I can fix it?

Since you are going to install system fresh, it sounds like, you should erase the drive. Boot from the installer disc, then select the language but do not start the installer. From the menu bar, you should have either an Applications or an Installer menu. From one of the menus, you can then start Disk Utility.
From the drives and volumes pane, select the internal drive hardware listing.
This will now allow you to partition or erase the disc. Now click the Erase tab and select Mac OS Extended (Journaled) as the format and then click the "Erase" button. You can name the volume that will actually be created, like for instance "MacintoshHD" or whatever you want.)
Once the erase has completed, you need to check the information for the hard drive at the bottom of the window. Be sure that the partition scheme is Apple Partition Map. If for some reason it is something else, like GUID, you won't be able to install MacOS on it. You will need to click the Partition tab, click the "Options..." button and select Apple Partition Map, then click the "Partition" button.
Once this is done, then you can quit Disk Utility and you should be able to install Tiger on that HD.

VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction id in results:

Subject: VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction
id in results:
Hello All,
I am facing the following error while running a loadtest (when i choose the scenario to be executed for No of test iterations). But the same loadtest with the Run duration for X minutes is running fine without any issues.
Any suggestions on the issue i am facing
error is :
could not read result repository: unknown transaction id in results:
or
could not read result repository: unknown request id in results:
Thanks
Satish

Hi Kotapati,
>>Subject: VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction
id in results:
According to your description, you mean that when you run your load test using the Test Iterations way and then get the error message, am I right?
If yes, please you try to close the VS, and then open this VS again. Then clean your load test project/solution and then re-build it, run your load test again check this issue again.
In addition, I suggest you could try to create a new load test and then run it using Test Iterations way check if you get the issue for the specified load test or all load tests.
If possible, I suggest you could share me simple load test for us so that we will further help you.
You could upload your load test to OneDrive and then copy link here.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I purchased an audio book from I tunes but when I sync with my I phone it respond with error saying could not read or write the file. It only sync parts 2

I purchased an audio book from I tunes but when I sync with my I phone it respond with error saying could not read or write the file. It only sync parts 2

Those videos are probably not in an iPod-friendly format. It’s picky about that. You can try converting them, if possible.
As for the audiobooks, are you sure they haven’t synced? You’ve enabled it to sync books and checked the “Audiobooks” section of your iPod?

On mac yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014)

Need help-
On my mac with yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014) ????

Thank you station_two but I did install them in my
applications>adobe>presets>brushes and still I get this error message......
On Tue, Dec 2, 2014 at 6:20 PM, station_two <[email protected]>

AE not reading all the XMP data from DNG files

I'm working on a very large time-lapse for a construction company - I have a sunset that is broken between two folders and rendering the folders seperately makes Quicktime unhappy during playback and I get an ugly jump in sunset exposure.
So I combined the two folders in Lightroom (LR) from my RAW files (NEF) and exported the entire sequence as DNG files with simpler numbering. The sequence is about 1560 files and constitutes about 22 GB of data. I created a new LR library from the DNG sequence to make sure it all looked good and it does.
I imported the same DNG sequence into AE, checked a few frames in the preview and sent it out to render. Two thirds of the way through the QT movie, exported in H.264 at 30 fps, I start seeing problems. Huge sections look like the XMP data has not been read, then there's a good section and then bad again. I matched the movie time to preview in AE and indeed saw the same problems in the AE preview. So the problem begain in AE's reading the files from the folder, not in rendering.
I went back to LR for file comparison. There was no problem in LR. All the DNGs look great.
I'm on a MacBookPro Retina with 2.8 GHz Intel processor, 16GB 1600 MHz DDR3 Ram and NVIDIA GeForce GT 650M 1024 MB graphics
I have the standard 69GB cache on an external drive and have 11GB RAM available for AE.
Installed CPUs =8
CPUs reserved for other apps = 2
RAM allocation per background CPU = 1GB
Actual CPUs that will be used = 6
I have the latest AE from the Adobe Cloud, although I haven't done the most recent update yet.
My thought was to break the folder up into smaller segments for rendering, but that's not the problem. I see the XMP hasn't been consistantly read in preview. To me it doesn't make sense that the folder is too large for preview because it's not even rendering it there, just reading the files...?
Any insight, solutions?
Thanks,
Dennis

Moominman wrote:
I am basically trying to export xmp files from a set of low resolution dng files so that I can access my Lightroom edits in the RAW files. I have separated the RAW and dng files in different folders
Hi Andy,
I dunno how best to get extracted xmp files into the raw folders, but if you are comfortable with exiftool, you can use it to extract xmp sidecars from DNG files.
If you want a turn-key solution which does not required you to futz with exiftool, then consider a free plugin I wrote:
robcole.com - xEmP
It will allow you to create xmp sidecars with all your DNG adjustments and metadata (which can then be applied to the non-dng raw files).
However, if you won't need the DNGs in your catalog afterward, then the easiest way is to convert them back to proprietary raw format using this plugin (also free, and I wrote it):
robcole.com - UnDNG
Conceptually, you can think of it as converting the DNGs to proprietary raw format, but note: it doesn't convert anything, it just allows existing raw files that are NOT in the catalog, to replace the DNGs that are in the catalog. All adjustments and metadata and everything else will be preserved (just like when you convert a proprietary raw to DNG format).
Rob

CS4 error message: Could not read the file because the plug-in could not understand the file

I get the error message in the subject line of this thread when I try to open a AI file in CS4. The file in question is a master plan for a river parkway. It includes a TIF of an aerial image of the project site (created from a SID file) with Illustrator generated linework for the various trails and other master plan features. Illustrator attempts to open the file, which appears for a brief time but without the aerial image TIF background visible (only the Illustrator linework and text is visible), then this message pops up, I click OK and the file closes and I'm put back at the opening screen.
I am running Windows 7 Pro (32-bit). My colleague created this file on his computer (same OS and programs as my computer) and he can open it fine. He did have this same issue for a bit, but then ran Updates under the Help menu and this seems to have fixed his problem. Before then, he had been re-starting his computer and having only Illustrator open, and was successful in getting the file to open.
I ran the updates yesterday and am up to date but the problem persists.
Any ideas? Thanks.

Hi Sam,
This is an issue that has plagued Illustrator CS4 since it's release. The problem is a memory issue. Adobe has never addressed it satisfactorily and likely won't since CS5 has now been released for almost a year now - tho I've read somewhere that CS5 has the same issue. On their site, Adobe has made a few weak mentions about it and has posted a hit-or-miss workaround, but their explanation kinda sounds like B.S., really and it's fairly apparent they're not sure what's going on and likely it's a compound problem and the result of a few different issues. They talk about some bug with color books between Photoshop and Illustrator, but that's DEFINITELY NOT the whole problem.
Here's a solution, tho it's certainly not perfect and will not always work:
1. Start a clean instance of Illustrator - DO NOT LOAD ANY FILES EXCEPT YOUR TARGET FILE, and
DO NOT HAVE RUNNING OR LOAD ANY OTHER FILES DURING THE WORK SESSION.
2. Find a good free memory manager that will allow you to free up memory with the click of a button, such as CLEANMEM - Google it - it's free.
3. Free up memory before you start Illustrator and, if the file opens, after you get the file loaded.
4. While you'll be able to work with the file, save it; manipulate and create new vector objects within the file, likely you will not be able to add additional linked files.
In the past, the times that I've had this issue have been when working with really large files and large linked graphics - like convention display graphics. The issue just gobbles up, or limits memory allocation. Good Luck!

Error Message: Could not read this files because the plugin could not recognise the file

It wont let me open a file I saved yesterday? What does this error message mean & how do I fix it?

WHich version, which system?
What's in the file?
Where is the file saved?
Have you already tried:
- a restart
- re-creating the prefs file?

Interface Builder Error: Could not read archive

I created a new project in Xcode. I double click on MainWindow.xib and it opens up Interface Builder like it should, but then I get an error saying "Could not read archive". This happens every time with any project I have tried to start; please help.

I' ve the same problem. And if I make a new interface and save it, after a new klick on MainWindow.xib there's tthe error saying too.
Sorry for my bad Englisch, but I'm German.

IT 0128(Notifications): Error:could not read text

Hi All
When I am trying to create subtype for IT 0128,it is showing error as "could not read text".Please help in solving the issue.
Regards
Ritu Saurabh

Ritu
That is not subtype problem infact
You to follow Dilek message or my message both are relavent to your answer
Problem here is you have subtype over there when you create text it is giving error.
t591a is creating subtype creation why you want to create subtype is you already have one
Best Regard

Could Not Read Archive Interface Builder

I made a new project in Xcode without tweaking any settings. When I go to open my mainwindow in interface builder I get an error saying Could Not Read Archive. Does anyone know whats going on. Please help as I can't work with my interface files

I' ve the same problem. And if I make a new interface and save it, after a new klick on MainWindow.xib there's tthe error saying too.
Sorry for my bad Englisch, but I'm German.

Ad Hoc Query - While executing - System could not read any data

Hello Techies,
When I am excuting my Ad hoc query - for one personnel number for which Infotype 28 subtype 0001 has been maintained
But system is throwing this error -
System could not read any data
Message no. AQ_AD_HOC226
Diagnosis
There is no data available for the specified selections.
System response
The results list in the lower part of the screen still displays the last list to be created.
Please let me know why does it happening ?
Thanks
Jaydeep

It was an date selection issue - as while executing the Ad hoc query - the reporting date is today -
changed to all

Contribute could not read the shared settings file.....

We are using Contribute 4 via FTP connection. Suddenly, I
have one user today that is getting the following error when trying
to connect to things she should have access to.
The error: "Contribute could not read the shared settings
file for this Website because the file has been corrupted. To
re-create the shared settings file, an administrator must
administrate the website again."
As a sidenote, this user had recently been sent approximately
41 files for review, I have no idea if there is a connection or
not. This feature has worked fine for them before.
Anyone see this problem before? I did check and I have other
users that can access and edit the Website just fine. It seems
specific to this one user.
Thanks - Lainie

I think this has something to do with the PNG plugin.

OS X 10.6.8 - Mountain lion will not download. Error: "We could not complete your purchase."

I am currently running OS X 10.6.8 on an iMac (model identifier iMac11,1). I have purchased Mountain Lion so that we can run Adobe CC. I have been advised that Mavericks is not compatible with our proxy server.
When attempting download from the Mac app store I receive this error:
"We could not complete your purchase. The product distribution file could not be verified. It may be damaged or was not signed."
The following is shown in console when attempting to download:
28/11/13 10:07:24 AM App Store[1824] *** Assertion failure in -[ISDistributionManager verifyDistributionAtURL:allowsDevSign:error:distributionController:], /SourceCache/Pisa/Pisa-60.8/Source/ISDistributionManager.m:146
Please help! I have read many discussions and there doesn't seem to be a fix for this as yet. Any ideas?
Thanks.

The following article pointed me in a better direction:
http://reviews.cnet.com/8301-13727_7-20081398-263/os-x-10.7-cannot-be-installed-on-certain-drives/
I tried to go the partition route, but for some reason the operation failed.
I decided to attempt a Lion install again afterwards anyway, but once again it failed, but now my whole system was hosed and could not revert back to Snow Leopard.
I did a restore from time machine. Once that completed, I attempted to install Lion again, and ta da! it works now.
What a pain.

Could not initialize Photoshop because an unexpected end-of-file was encountred.

I have a problem with Photoshop, I can run it and work in it. After the start of reports this error message: Could not initialize Photoshop because an unexpected end-of-file was encountred.
I do not know we mopped PC, defragment, and uninstall of Photoshop installed. You do not know what to do?

Try resetting your preferences. If that doesn't work, consider a complete uninstall and reinstall.

Error 105, Could not read full block (2048 bytes) from checkpoint file ~/dirchk/sdfsdj.cpe

Similar Messages

Maybe you are looking for