Error: 1051293: Login fails due to invalid login credentials

Need help!
I searched all the threads for this but i still have not found one that works for my issue.
I was trying to add a new essbase server using EAS and i been getting the following error.
I am able to login into the EAS with the same user name and password, but i am getting the following error when i try to ADD essbase server.
admin July 7, 2010 12:40:32 AM CDT com.essbase.eas.admin.defs.AdminCommands.AddServerToUserList Succeeded
winserver com.essbase.eas.essbase.defs.ServerCommands.Connect July 7, 2010 12:40:33 AM CDT Failed : 1051293 Login fails due to invalid login credentials
Error: 1051293 Login fails due to invalid login credentials
Essbase Server: winserver com.essbase.eas.essbase.defs.ServerCommands.Connect July 7, 2010 12:40:33 AM CDT
Error: 1051293: Login fails due to invalid login credentials
HELP!!
Alex

You have already posted the question here :- Error: 1051293: Login fails due to invalid login credentials
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Cannot connect to olap service. Cannot connect to Essbase Server. Error:Essbase Error(1051293): Login fails due to invalid login credentials

Hello All,
I am getting following error, when trying to expand essbase from calculation manager, "Cannot connect to olap service. Cannot connect to Essbase Server. Error:Essbase Error(1051293): Login fails due to invalid login credentials",
I am using EPM 11.1.2.1
Thanks
Yash

If you have moved the server to a new data center and an issue has started occurring then it could point to the change.
Are you able to log into essbase directly with Maxl using the same account?
If you run a registry report do you see any of the configuration with IPs instead of DNS/hostname
Cheers
John
http://john-goodwin.blogspot.com/

EssBase: Login fails due to invalid login credentials

I am currently running Hyperion System Planning 9, authenticating users through my LDAP server and am having a problem creating new users. I have gone through what I believe are the steps I need to take and have created my users but now when they try to login to EssBase, through the excel add-in, I get this message: "Login fails due to invalid login credentials"
I have searched the forums and the Essbase knowledge base and have come up empty. The only thing I have found is this:
"You just need to provision your shared services user with access to Essbase. Right-click on your user, select provision and then give them the required Essbase rights."
I have provisioned my users several times and made sure that they are added to the correct groups but they still can't log in.
Has anyone had this issue before?
Thanks,
J

Another point that you need verify, the service sequence:
1. Start the analytic Services
2. Star analytic Administration services.
regards,
Wallace

AD 11g Trusted Recon is failing due to invalid Date format for Start Date

We are using OIM 11g with AD 11g connector.
we have mapped "whenCreated" attribute of AD to "Start Date" in OIM. We ran Trusted Recon, the recon failed due to invalid date format.
we got the following error :
Caused By: oracle.iam.reconciliation.exception.InvalidDataFormatException: Invalid data - 10/19/2012 10:33:30 AM against Date format yyyy/MM/dd HH:mm:ss z for key Start Date
at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.convertReconFieldsToOIMFields(ReconOperationsServiceImpl.java:1610)
at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.ignoreEvent(ReconOperationsServiceImpl.java:548)
at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.ignoreEvent(ReconOperationsServiceImpl.java:535)
at sun.reflect.GeneratedMethodAccessor9326.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.iam.platform.utils.DMSMethodInterceptor.invoke(DMSMethodInterceptor.java:25)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
Thanks.

Caused By: oracle.iam.reconciliation.exception.InvalidDataFormatException: Invalid data - *10/19/2012 10:33:30 AM* against Date format yyyy/MM/dd HH:mm:ss z for key Start Date
Error is because of invalid date format.
You need to bring data in required format. As I remember you can configured it in one of the AD configuration lookup.

Data Integrator Web administrator & Login Failed in Profiler server login

Post Author: mohideen_km
CA Forum: Data Integration
Hi guys
Help me
Login Failed in Profiler server login
I Create Profiler Repository in Repository manager
While I login in BO DI Designer
I am getting an error
While login in Profiler Server Login
Connection to the Profiler Error is : server failed
close the application saving the login
Web administrator Problem
I have some doubts.Business objects Data Integrator.
error is : I can't View the Batch jobs history for the repository
Procedure I followed
In data Integrator Web administrator
--while logging as Admin
--In management Tree left frame of browser
--Click Status Interval -- Select > Show last Execution of job -- Click
apply --> Click Home
after Clicking home --- Click the repository ( I created direpo) i.e
Batch
After that I can't view anything any job name.......
Help me to figure it out
Mohideen
Prediktiva Technologies

Post Author: bhofmans
CA Forum: Data Integration
Hi,
For the profiler problem : you need to add the profiler repository to the web admin too (you can do this in the tree Management/Repositories). Next you need a webadmin user that is linked to this repo, you could use the admin user for that, just check in Management/Users that for this user the profiler repo is attached.
Once this is set up in the management console, from within the designer, you can connect to the Profiling services using the web administrator's server name and port (e.g. localhost:28080) and the web admin user and password (e.g. admin/admin).
For your second problem : please check the connection to the repo (I assume you added the direpo already to the web admin) . Again in the tree Management/Repositories go to the local repository connection you created and check the connection (there is a test button). If the connection is correct, you will see the job history (empty if there are no job executions), in the configuration page you will see a list of all jobs and can execute or schedule a job.
Hope this helps...

Error: NDMP operation failed due to media error

I scheduled a RMAN backup job on oracle 11g EM and sometime it failed when running datafile backup. The log showed the error come from media layer and did not specify detail message. We used secure backup to transfer data to tape. There are 4 tape drivers in service, but only one of them always return this error. Could anyone tell how to resolve the problem ?
RMAN-03009: failure of backup command on c1 channel at 01/23/2014 11:17:29
ORA-27192: skgfcls: sbtclose2 returned error - failed to close file
ORA-19511: Error received from media manager layer, error text:
   sbtclose2: Internal error - NDMP Data Service has exited prematurely.
   For more information, please check the transcript for this job ('oracle/33779.1').
ORA-27000: skgfqsbi: failed to initialize storage subsystem (SBT) layer
Additional information: 1292
ORA-19511: Error received from media manager layer, error text:
continuing other job steps, job failed will not be re-run
And I found below logs in the secure backup scripts log. it that mean a network error?
10:16:42 await_ndmp_event: sending progress update
    10:16:42 SPU: sending progress update
    10:17:43 QTOS: received osb_stats message for job oracle/33656.1, kbytes 10452672, nfiles 0
10:17:43 await_ndmp_event: sending progress update
    10:17:43 SPU: sending progress update
    10:19:35 NWEM: saw tape write error log message ("tape write failed due to media error")
tape write failed due to media error
    10:19:35 MNPO: mover halted with reason=media error
    10:19:35 MGS: ms.record_size 65536, ms.record_num 0x28094, ms.bytes_moved 0x280940000
    10:19:35 QTOS: received osb_stats message for job oracle/33656.1, kbytes 10497280, nfiles 0
    10:19:35 MNPO: data service halted with reason=connection error
    10:19:35 SNPD: Data Service reported bytes processed 0x280B40000
    10:19:53 A_T: suppressing filemark output due to NDMP having written one
    10:19:53 A_T: writing marker label; here it is:

Judging by the transcript snips that you provided, I also believe that this is caused by a bad drive or bad media.
Start by looking at the output of the command :
# obtool dumpdev <tape_drive_name>
(replace "<tape_drive_name>" by the name of the drive which was used during the failed job).
Look for any errors or warnings during the date/time the backup job failed. These message usually provide a good idea about the problem that occurred.
Next try the same backup using the same media in another drive to see it the problem reoccurs or not. In case the problem reoccurs, there's a good chance that the media is bad. If the backup succeeds on another drive, then try the same backup using the original drive but with a new media. If the backup fails again on the same drive using new media, you should open a support request with the tape drive vendor. In that case, collect the logs from the tape library (and dump the tape drives is possible).
HTH,
Gio

UltraLiteJ Error[-857]: Synchronization failed due to an error on the server

Hi,
I have been trying to sync with a syncronization group, In SUP 2.2 and android.
But my android eclipse log cat shows...
Caused by: com.ianywhere.ultralitejni12.implementation.JniException: UltraLiteJ Error[-857]: Synchronization failed due to an error on the server: [-10225] Message: Failure occurred while executing user supplied code
and my SCC logs
shows this type error info,
{"_op":"C","level":5,"code":412,"eisCode":"9502","message":"java.sql.SQLException:SQL Anywhere Error -638: Right truncation of string data","component":"NFAApp_QASDB","entityKey":null,"operation":"synchronize","requestId":null,"timestamp":"2014-04-21 11:50:15.997","messageId":0,"_rc":0}
I have prepared my mbo for SQL store procedure. Please help me!
Thank you.

Hi Prashant,
Please mark this Discussion with a Correct Answer and Helpful Answer where appropriate. See http://scn.sap.com/community/support/blog/2013/04/03/how-to-close-a-discussion-and-why Even if you discovered the solution without any outside contributions, it helps others to understand what the solution turned out to be.
Regards, Mike
SAP Customer Experience Group - CEG

Vtext - "Delivery to this destination failed due to invalid address"

I'm trying to send a text message to a Verizon phone from a PC, using Verizon's Vtext.com service, which I've used successfully in the past, although it's been several years.
When I tried using it today, I kept getting the message, "Delivery to this destination failed due to invalid address." However, the address I was using was indeed a valid Verizon cell phone number, all 10 digits, exactly as specified. I tried this several times, and with several different Verizon cell phone numbers.
Has anyone else had this problem and/or found any solutions?
Thanks in advance for your helpful advice!

You can use the vtext.com service, which *should* work - but in your case sounds like it is NOT working. I just used it and sent a test message to myself, which came through. It did come in from an "unverified sender", since I didn't log in, I just went to vtext.com and did a quick send as a test.
Another option to try is to use your email program, and send the text to [email protected] (just the #, no dashes) - in that case it would show as a text form your email address though, not from whatever you specify in the vtext program.

Installation failing due to invalid packages

During installation of Oracle 10G designer the repository installation fails due to invalid packages. When I examine the packages they are failing to compile based on dependencies on dbms_lock. I am running against a fresh installation of 11g on the database. I verified that the package exists and a public synonym has been created but I cannot see the package from any other user aside from sys. (system cannot see the package).
Is there anyway I can open up sys.dbms_lock to allow it to be used in compiling these objects?

How did you create the repository?
Did you follow the steps of the installation guide?
In this guide you find the folloiwing statements:
grant execute on dbms_rls to repos_owner;
grant execute on dbms_lock to repos_owner;
grant execute on dbms_pipe to repos_owner;
grant create table to repos_owner;
grant create view to repos_owner;
grant create procedure to repos_owner;
grant create synonym to repos_owner;
grant create sequence to repos_owner;
grant select on sys.v_$nls_parameters to repos_owner with grant option;
grant select on sys.v_$parameter to repos_owner;
grant select on dba_rollback_segs to repos_owner;
grant select on dba_segments to repos_owner;
grant create any synonym to repos_owner;
grant drop any synonym to repos_owner;
In the statement you will see that the dbms_lock package is granted to the repos_owner. (repos_owner is the username of the repository owner, if you installed under a different user use that username)

Photo upload to iCloud fails with the error message 'Upload failed due to network error'. Ideas?

I am trying to get my photos on my Mac Mini onto my iPad 2 via iCloud. I have tracked the problem down to upload failure from Mini to iCloud. 1St (&every) photo upload fails with the message 'Upload failed due to network error'. Any ideas?

I doubt this issue is related to the Mac Mini specifically.
I have 44 photos shot with an iPhone 3G that will not upload to iCloud Photo Library. I try and drag-and-drop them onto the web interface and I get the same error message you did:
Upload Failed
44 items were not uploaded due to a network error.
However, I have another 62 photos shot with the same iPhone 3G that upload without issue. And I just uploaded 440 photos from an iPhone 4 without issue.
I thought it may have something to do with certain EXIF tags missing on the photos that would not upload but I have not been able to figure out a pattern when comparing photos that work and photos that don't work.
The photos that won't upload open fine in QuickLook, Preview, and Pixelmator so I doubt the image is corrupted in some way.
I can AirDrop the photo to my iOS device and it will upload to iCloud Photo Library, the photo/video count will be incremented on the iOS device and iCloud Photo Library but the photo will never be displayed in iCloud Photo Library. When I delete the photo on the iOS device the photo/video count will decrement on the iOS device but will remain the same in iCloud Photo Library. When this occurred the following error was thrown in the iCloud Photo Library web interface:
Expanding Details shows the following log:
https://gist.github.com/jameswthorne/757e319b9fee63119890

Tomcat error-start up failed due to previous error

hi,
in Netbeans IDE , when i create new a web service project and deploy war file in the tomcat and when i try to run on the browser am not able to run the project. the error am getting is start up failed due to previous error.can anyone please help me out this ?????
if i deploy the default project war file its running but if i create some pages and try to run it its giving error.
regards,
Nagaraj

Read the exception/error referred by "previous error" in the appserver logs.

Time Machine restore of File Vault encrypted user failed: Login failed due to an error.

Hello everyone,
I did regular time machine backups of a File Vault (version one) encrypted user folder. Now I needed to restore a few files that have been deleted unintentionally. Since single files can't be restored from a File Vault encrypted backup time machine told me that I must restore a complete backup from a certain time. I did that. Time machine quited to copy at about 25 percent and rebooted. Everything was looking good until I entered my password for the recovered user. Then I got the answer:
"Logging in to the account failed because an error occurred"
And now?
I tried to restore some other backups, none was working. I copied the relevant .sparsebundle file out of the backup folders and tried to mount it. Didn't work. It says "not recognized". Then changed it's owner to root and tried again, the same answer. I tried to repair it by using hdiutil but it also says "attach failed - not recognized".
Apple, I am asking you: Are my data lost?
Anyone, please provide help.
(Apple, it's more than a shame what you are providing for the safety of a user's data!)

Try Repairing the backups, per #A5 in Time Machine - Troubleshooting.
If/when you get this sorted out, strongly consider switching to File Vault 2. It works much better, especially with Time Machine.
Or, if possible, only encrypting a few sensitive items, per Protecting confidential documents in a secure disk image.
Message was edited by: Pondini

Portal login failed due to Desktop error

Hi all
we are using EP 7.0.
Accidently we made a wrong entry in the master rule for portal desktop.The entry is defined for "*" (that means for all users).
Now nobody can log into portal.
How am i suppose to correct that entry?Is there any way to do it using Visual Administrator?
very urgent
Thanks in advance
regards
shankar

Hi Steffi,
Issue is resolved.
I didn't deleted any entries in the master rule.
To access Content admin using below direct 1st URL, once you logon into the url and then enter second url and modify the master rule.
http://portal:port/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fadministrator!2fsuper_admin!2fsuper_admin_role!2fcom.sap.portal.content_administration!2fcom.sap.portal.content_admin_ws!2fcom.sap.portal.portal_content
Access System admin using below direct URL to access Master Rule Collection to fix the wrong rules.
http://portal:port/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fadministrator!2fsuper_admin!2fsuper_admin_role!2fcom.sap.portal.system_administration!2fcom.sap.portal.system_admin_ws!2fcom.sap.portal.system_configuration!2fcom.sap.portal.portal.display!2fcom.sap.portal.wd_portalDisplayRules
Thank you for your support!!
Thanks,
Naveen

Uninstallation of LabView 6.1 fails due to invalid drive error

I have LabView 6.1, NI Drivers and VISA installed in my Windows XP Professional. I did a full software installation moths ago. Now I am trying to install LabView 8.5 and the new drivers require previous versions to be removed.
This yields a problem, trying to unistall 6.1 it turns out that buil-in uninstallation fails because of my Program Files being all installed in my main Windows unit device labelled with an F: letter. Uninstaller looks for a typical C: letter and fails. Is it not possible to change letters from Windows main unit devices (without risk).
How can I uninstall the software from my computer?

Thank you for all your replies
1) Neither "Revouninstaller" nor "Free Uninstaller" seem to work. NI packages appear again after uninstalling them using the programme. This also happens with ther Windows Ass/Remove software tool, though the latter is more inefficient (some package uninstallations are automatically aborted). I have been unable to uninstall any package with this methods.
2) I will try msiblast, I saw a thread in the forum of people with similar problems. I will report the results tomorrow.
3) Sorry, I meant my system drive partition. It is F: because of complicated problems that arised during a Linux Xubuntu + Windows XP dual boot installation. I had to put Xubuntu first and this yielded trouble.

Login failed .Please verify your login information or contact the system ad

Oracle EBS Version:Oracle R12 12.1
Database :11.2.0.1
OS:IBM AIX 6.1 Power system
After cloning of production system . We are not bale to login.
Apart from this we are also getting the below error while validating the FND_WEB_SEC.VALIDATE_PASSWORD
Oracle error -449: ORA-00449: background process 'MMON' unexpectedly terminated with error 448 has been detected in FND_WEB_SEC.VALIDATE_PASSWORD.

953053 wrote:
Oracle EBS Version:Oracle R12 12.1
Database :11.2.0.1
OS:IBM AIX 6.1 Power system
After cloning of production system . We are not bale to login.
Apart from this we are also getting the below error while validating the FND_WEB_SEC.VALIDATE_PASSWORD
Oracle error -449: ORA-00449: background process 'MMON' unexpectedly terminated with error 448 has been detected in FND_WEB_SEC.VALIDATE_PASSWORD.Please see these docs.
Oracle Error -449: ORA-00449: Background Process 'MMON' Unexpectedly Termination When Changing Application Password [ID 1451851.1]
OERR: ORA 449 background process <name> unexpectedly terminated with error <n [ID 18448.1]
Database Crashes With ORA-00449 and ORA-00601 [ID 730287.1]
BACKGROUND PROCESS DIES, NO TRACE FILE GENERATED [ID 1029808.6]
What scenarios can occur if a disk space is exhaused for drives containing Alertlog, Core Dump Or Tracefiles [ID 433852.1]
Thanks,
Hussein

Error: 1051293: Login fails due to invalid login credentials

Similar Messages

Maybe you are looking for