Error 1053 dbconsole !
hi all
how can i solve error 1053 when i want to start dbconsole ?
Edited by: ayman hamdan01 on Feb 27, 2013 4:21 AM
ayman hamdan01 wrote:
thx for replay ..
my database 11g , and my system windows7 64 bit
error : 1053 the service did not respond
Edited by: ayman hamdan01 on Feb 27, 2013 4:40 AMPlease post information once , what DB Version 4 digit example ---> 11.2.0.1/11.2.0.2/11.2.0.3 and which type of Windows 7 ?
Check
https://cn.forums.oracle.com/forums/thread.jspa?threadID=2201030
Similar Messages
-
Itunes 12.1.0.71 will not install on win 7 error 1053
I have a BIG problem...cannot install 12.1.0.71...The install gets about 90% thru and then I get the error....Windows could NOT start Apple Mobile Device Services error 1053...The Service did not respond......after trying all the solutions I found online I called Apple support and paid 99$(which was not refunded) and two of their techs...the supposed top level Cathy...was unable to help....after two hours of work....they can remotely see and guide me as to what to try and it was mostly what was published online at apple support re how to really uninstall Itunes properly which we did about 6 times...and still it would not get past the "windows could not startt AMDS and errors 1053 and service did not respond and error 7 win error 193 and itunes helper not installed correctly....those later errors occur when you ignore that AMDS did not start...etc....
So I am kind of stuck....
Other things we tried....Disable Norton....Clean the registry using Norton Utilities....No other hidden Viruses around all clear on that....Win 7 totally updated....used the windows service that checks just about every kind of possible bug in system from the MS site...no help there...
In the whole process I lost the ability to restore to an earlier version that worked that disappeared off the restore calendar.
SO HELP!!!!!!!!!!!!!!????????????For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2 -
Error starting DBConsole. DBConsole could not be started successfully
Hello All.
How to fix the following failure on Windows XP SP2.
Oracle application server 10g release 2 (1.2.0.2)
1-SEVERE: Error starting DBConsole. DBConsole could not be started successfully
2-Configuration assistant "Single Sign-On Configuration Assistant" failed
================================================================================================================
Output generated from configuration assistant "Oracle Database Configuration Assistant":
Mar 31, 2006 1:33:03 PM oracle.sysman.emcp.EMConfig updateReposVars
INFO: Updating file C:\oracle\infra10g1202\sysman\emdrep\config\repository.variables ...
Mar 31, 2006 1:33:18 PM oracle.sysman.emcp.EMConfig addPortEntries
INFO: Updating file C:\oracle\infra10g1202\install\portlist.ini ...
Mar 31, 2006 1:33:18 PM oracle.sysman.emcp.EMConfig updateEmdProps
INFO: Updating file C:\oracle\infra10g1202\sysman\config\emd.properties ...
Mar 31, 2006 1:33:20 PM oracle.sysman.emcp.EMConfig updateConfigFiles
INFO: targets.xml file is updated successfully
Mar 31, 2006 1:33:20 PM oracle.sysman.emcp.EMConfig updateEmomsProps
INFO: Updating file C:\oracle\infra10g1202\sysman\config\emoms.properties ...
Mar 31, 2006 1:33:21 PM oracle.sysman.emcp.EMConfig updateConfigFiles
INFO: emoms.properties file is updated successfully
Mar 31, 2006 1:33:37 PM oracle.sysman.emcp.EMConfig copyOC4JDir
WARNING: Error copying OC4J config files from C:\oracle\infra10g1202\oc4j\j2ee\OC4J_DBConsole to C:\oracle\infra10g1202\oc4j\j2ee\OC4J_DBConsole_srdb-pc05.tamer.com_as10gdb
Mar 31, 2006 1:33:37 PM oracle.sysman.emcp.EMConfig startOMS
INFO: Starting the DBConsole ...
Mar 31, 2006 1:38:38 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting DBConsole. DBConsole could not be started successfully
Configuration assistant "Oracle Database Configuration Assistant" succeeded
================================================================================================================
Output generated from configuration assistant "Single Sign-On Configuration Assistant":
Parameters passed to ssoca : param0:config param1:C:\oracle\infra10g1202 param2:cn=orcladmin param3:***** param4:AMERICAN_AMERICA.WE8MSWIN1252 param5:http param6:srdb-pc05.tamer.com param7:7777 param8:en
Fri Mar 31 13:45:16 EST 2006
Parameters received by ssoca : param0:config param1:C:\oracle\infra10g1202 param2:cn=orcladmin param3:***** param4:AMERICAN_AMERICA.WE8MSWIN1252 param5:http param6:srdb-pc05.tamer.com param7:7777 param8:en
Content of ssoca config file is :
-- listing properties --
config_sso_oid=true
config_lang=true
config_sso_seed=true
config_targets_xml=true
config_ssoupg=true
config_dad=true
config_em_integ=true
ACTION by SSOConfigAssistant :
C:\oracle\infra10g1202\bin\sqlplus orasso/*****@"cn=as10gdb,cn=oraclecontext"
@C:\oracle\infra10g1202\sso\admin\plsql\sso\ssoseedi.sql http srdb-pc05.tamer.com 777
SQL*Plus: Release 10.1.0.4.2 - Production on Fri Mar 31 14:45:19 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> Connected.
SQL> SQL> exit;
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.2 - Production
With the Partitioning, OLAP and Data Mining options
ACTION by SSOConfigAssistant :
C:\oracle\infra10g1202\bin\sqlplus orasso/*****@"cn=as10gdb,cn=oraclecontext"
@C:\oracle\infra10g1202\sso\admin\plsql\sso\ssooidd.sql srdb-pc05.tamer.com 636 "cn=orcladmin" ***** Y
SQL*Plus: Release 10.1.0.4.2 - Production on Fri Mar 31 14:45:24 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> Connected.
SQL> Creating OID entries for SSO
Error code : 1
Error message: User-Defined Exception
LDAP error : 28862: UnKnown Error Encountered
ERROR: deleting application entry
Error code: 1
Error message: User-Defined Exception
ERROR: creating SSO users and groups in OID
PL/SQL procedure successfully completed.
*** Refreshing WWC OID cache....***
declare
ERROR at line 1:
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "ORASSO.WWSEC_OID", line 1199
ORA-06512: at "ORASSO.WWSEC_OID", line 1328
ORA-06512: at "ORASSO.WWSEC_OID", line 2498
ORA-06512: at "ORASSO.WWSEC_OID", line 2528
ORA-06512: at "ORASSO.WWSEC_OID", line 1606
ORA-06512: at "ORASSO.WWSEC_OID", line 1755
ORA-06512: at "ORASSO.WWSEC_OID", line 2133
ORA-06512: at line 8
No errors.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.2 - Production
With the Partitioning, OLAP and Data Mining options
ERROR : Exception while configing SSO DAD :
java.sql.SQLException: Io exception: JNDI Package failurejavax.naming.CommunicationException: Request: 1 cancelled
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:174)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:286)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:327)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:433)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:150)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:31)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:571)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at oracle.security.sso.SSOConfigAssistant.configDAD(SSOConfigAssistant.java:1473)
at oracle.security.sso.SSOConfigAssistant.ssoConfig(SSOConfigAssistant.java:1270)
at oracle.security.sso.SSOConfigAssistant.main(SSOConfigAssistant.java:217)
Please fix the error reported in the stack trace above and re-run SSO Config Tool.
Repository API Raised Exception : oracle.ias.repository.schema.SchemaException: Unable to establish connection to the Oracle Internet Directory Server ldap://srdb-pc05.tamer.com:389/. Base Exception : javax.naming.CommunicationException: simple bind failed: srdb-pc05.tamer.com:389 [Root exception is java.net.SocketException: Socket closed]
oracle.ias.repository.schema.SchemaException: Unable to establish connection to the Oracle Internet Directory Server ldap://srdb-pc05.tamer.com:389/. Base Exception : javax.naming.CommunicationException: simple bind failed: srdb-pc05.tamer.com:389 [Root exception is java.net.SocketException: Socket closed]
at oracle.ias.repository.directory.DirectoryReader.connect(DirectoryReader.java:124)
at oracle.ias.repository.IASSchema.getColocatedDBConnect(IASSchema.java:657)
at oracle.ias.repository.IASSchema.getDBConnect(IASSchema.java:767)
at oracle.ias.repository.SchemaManager.getDBConnect(SchemaManager.java:406)
at oracle.security.sso.SSOConfigAssistant.configTargetsXML(SSOConfigAssistant.java:1847)
at oracle.security.sso.SSOConfigAssistant.updateTargetsXML(SSOConfigAssistant.java:1786)
at oracle.security.sso.SSOConfigAssistant.ssoConfig(SSOConfigAssistant.java:1280)
at oracle.security.sso.SSOConfigAssistant.main(SSOConfigAssistant.java:217)
Please fix the error reported in the stack trace above and re-run SSO Config Tool.
Setting the AS product version value in targets.xml to be "10.1.2.0.2".
Calling method getASTargetInfo.
getASTargetInfo: oracleHome = "C:\oracle\infra10g1202".
getASTargetInfo: iasName = "infra10g1202.srdb-pc05.tamer.com".
getASTargetInfo: iAS Target Type = "oracle_ias".
getASTargetInfo: StatusURL value = "http://srdb-pc05.tamer.com:7777".
Retrieved SSO protocol, host, and port info from targets.xml.
The values are: "http://srdb-pc05.tamer.com:7777".
The following values will be used to configure the sso_server target entry in targets.xml.
Protocol: "http".
Hostname: "srdb-pc05.tamer.com".
Port: "7777".
C:\oracle\infra10g1202\jdk\bin\java
-cp
C:\oracle\infra10g1202\lib\xmlparserv2.jar;C:\oracle\infra10g1202\sysman\webapps\emd\WEB-INF\lib\emd.jar;C:\oracle\infra10g1202\sysman\webapps\emd\WEB-INF\lib\log4j-core.jar;C:\oracle\infra10g1202\lib\emSDK.jar
-DORACLE_HOME=C:\oracle\infra10g1202
oracle.sysman.emSDK.conf.TargetInstaller
addtarget
C:\oracle\infra10g1202\sso\sso_server_target2add.xml
Configuring SSO languages with the following language code:
us
Language us is already installed.
About to execute java call using emConfigInstall.jar.
Here are the arguments:
C:\oracle\infra10g1202\jdk\bin\java
-DORACLE_HOME=C:\oracle\infra10g1202
-jar
C:\oracle\infra10g1202\jlib\emConfigInstall.jar
consolesn
C:\oracle\infra10g1202\sso\conf\consoleConfigSNSegment.xml
Finished executing the call.
Child Process has exited.
SSO Configuration Assistant failed.
Configuration assistant "Single Sign-On Configuration Assistant" failedI am getting a similar error in iAS 10g R2 on Windows 2003 64-bit. Did you solve your problem? Am I better off using Windows 2003 32-bit instead?
Edited by: jkrich on Apr 7, 2011 8:33 PM -
Can anyone help!!!!!!!!
Oracle service does't start on windows 2000 gives error:
Could not start the oracle service on Local computer
Error 1053: The service did not respond to start or control
request in a timely fashion.Can anyone help!!!!!!!!
Oracle service does't start on windows 2000 gives error:
Could not start the oracle service on Local computer
Error 1053: The service did not respond to start or control
request in a timely fashion. This is what I did to start the oracle service..
1. Change the startup type to manual in the windows service panel
2. Restart the Windows 2000 PC
3. Start the Oracle service by clicking the start button in the services window.
4. It will hit the same error ie 1053..
5. Now kill the oracle process using windows Task Manager
6 Once again go back to services window and click the start button
7. It will show the status meter window with a close button..
8. After the status meter crosses halfway hit the close button..
9. Your oracle process is started now.. -
Error 1053 when trying to upgrade from BOE 3.0 Fix Pack 3 to BOE 3.1 Update
Hi! I am trying to upgrade my BOE 3.0 FP3 Server to 3.1 (Update package, not full 3.1 install). The upgrade goes very well, and for a very long time, up until the very end. At the end when it tries to restart the Tomcat service it throws an error 1053 with the following message.
The Apache Tomcat 5.5.20 service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
I also get this same message if I try to start the service through Control Panel --> services or through CCM. The event viewer shows this message also in addition to the following..
Timeout (30000 milliseconds) waiting for the Apache Tomcat 5.5.20 service to connect.
Has anyone seen this before or know if this is a known error? I am hoping for a workaround so I dont have to backout or reinstall!
Thanks!
--AntonioHi Antonio,
Following information might help you to resolve the issue.
Solution1:
To resolve this behavior, use Computer Management to update the user profile so it is a member of the Administrators group, and then reboot the server to validate your changes.
Solution2:
You can disable DEP or add services to it:
1.Right-click on My Computer and select Properties.
2.Click the Advanced tab.
3.In the Performances section click Settings.
4.Click the Data Execution Prevention tab.
5.Use the Add button on the bottom to add the service's executables and ensure the box is checked. Do this for each Crystal Enterprise service.
Alternatively, you can disable DEP by checking the Turn on DEP for essential Windows programs and services only option. By doing so, it will disable DEP to all applications on the machine including Business Objects.
Solution3:
Increase the service time-out for Windows Services : http://support.microsoft.com/kb/839803http://support.microsoft.com/kb/886695
Regards,
Sarbhjeet Kaur -
TS1567 Itunes wont download because Apple Mobile Device cannot be used due to error 1053
i bought an ipod touch 4th generation for my friend. She could not download Itunes beacause of the Apple mobile device not being able to activate due to an ''error 1053''... That error is something about not having the correct amdinistator privileges. I tried to run the download as the administrator but i needed the administrator password she said that she cant remember the password, actually she said that there was never a password. Is there maybe a way to dowload the Apple Mobile Device again so that she can download Itunes?
Its because your mobile device isnt started. Heres how to restart it: http://support.apple.com/kb/TS1567
-
I am having trouble running AIR applications with Flex SDK 4.0 (and 4.1). Here is what I am doing:
On OS X 10.6.4 using eclipse with Flex Builder 3 installed I create a new flex project with AIR.
I have eclipse setup to use the SDK flex_sdk_4.1.0.16076.
I clean the project and run it and get a window telling me:
VerifyError: Error #1053: Illegal override of isRelatedObjectInaccessible in RemappedMouseEvent.
The application fails to start after that.
When I switch SDKs to Flex SDK 3.3.0.4852 and clean, the applications starts as expected.
I have tried to run adl from the command line using the artifacts in the bin-debug folder and I get the same error.
I am stumped here, does anyone know what else I can try?
Thanks
-LucsaHi Lucas,
Are you running into this error when compiling a brand new flex project for AIR? If so, I suspect something went wrong with your AIR overlay. Please see the How to Overlay the AIR SDK for use with the Flex SDK tech doc. Note that these instructions reference AIR 1.5, but they are the same for AIR 2.
Let me know if you have any questions about the overlay process or if you've already done all this.
Thanks,
Chris -
Windows Service Error 1053 - Service did not respond to start or control request
I'm presuming it's logging on as a domain user. Has that user got "Logon as a Service" rights?
I've been working on this issue with our developers for the past week, and so far we're stumped. We have a Windows Service that was created in-house to process our customers imaging requests with assured delivery that are past the start date. We currently have this service, and a few others like it, running on 12 different bus servers. The servers all run .NET Framework 4.5, and all the other servers run it with no problem. This particular service bus gives us the "Error 1053" as so on as we try to start the service. I've increased the timeout to 60 seconds, but it was set at 30 before and it times out IMMEDIATELY after pressing start. I've uploaded the .config file we use. I modified the IP addresses for security reasons. The service logs on with an administrator password that has domain access rights. We've tested the connectivity...
This topic first appeared in the Spiceworks Community -
Error 1053: The service did not respond to the start or control ...
Dear SapService,
I've installed a BI7.0 (ABAP only) instance on cluster with :
windows 2003 x64 SP2
SQL server 2005 x64 SP2
WAS 7.00 kernel 80
*the service runs with domain user.
I've upgraded to kernel 114 (latest). After the upgrade the ASCS service doesn't start. It throws error:
"Error 1053: The service did not respond to the start or control
request in a timely fashion"
To solve this problem I've tried:
-go back to kernel 80 but I still get the same error.
-start the service manually on the second node. Still same error.
-restart the two servers and try again to start the service on the
nodes.
Any ideas ?
Please advice,
Dimitry HaritonovHi,
Check SAP Note 82751 - Problems with SAP Services & SAP Service Manager
for some initial investigation.
Regards,
Siddhesh -
I have Flex Data Service on Tomcat 4.1. (i.e. extracted
flex.war in webapps/flex directorry of tomcat. "webapps/flex - flex
directory is created inside the webapps"). Tried with the request
for a sample mxml in the browser and able to see an swf file
creation out of that and i am able to get that swf file in the
browser. Thats fine.
Now my scenario is as below:
I request a sample html, in which an embedded sample swf with
only one button on it. The request is to asp.net application. The
request url is :
http://localhost/FirstSite/Sample.html.
I am able to get the initial swf file with this.
Now on click of a button i will send request to an aspx page
which again sends a request for an mxml to the tomcat (say tomcat
has Sample2.mxml) as,
HttpWebRequest req = (HttpWebRequest)WebRequest.Create("
http://localhost:8080/flex/generated/Sample2.mxml");
HttpWebResponse res = (HttpWebResponse)req.GetResponse();
After execution of the second line i am able to see the
creation of Sample2.swf in the tomcat's webapps/flex/generated
folder.
Now after the second line, that aspx will write an url string
as respose to the client as,
Response.write("
http://localhost:8080/flex/generated/Sample2.swf");
In the action script i am able to get this url when printed
in trace at the client. Now i am trying to load that Sample2.swf
with the lines in action script...
var requiredURL:String = "
http://localhost:8080/flex/generated/Sample2.swf";
var urlReq:URLRequest = new URLRequest(requiredURL);
var ldr:Loader = new Loader();
ldr.load(urlReq);
ldr.contentLoaderInfo.addEventListener(Event.COMPLETE,
loaded);
function loaded(e:Event):void {
removeChildAt(0);
stage.addChild(ldr);
When i try this am getting error as,
VerifyError: Error #1053: Illegal override of automationName
in mx.core.Container.
at flash.display::MovieClip/gotoAndStop()
at
mx.managers::SystemManager/::preloader_initProgressHandler()
at
flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.preloaders::Preloader/::timerHandler()
at flash.utils::Timer/flash.utils:Timer::_timerDispatch()
at flash.utils::Timer/flash.utils:Timer::tick()
Followed by series of errors like,
ReferenceError: Error #1065: Variable
_PanelStyle__embed_css_Assets_swf_CloseButtonUp_638970594 is not
defined.
at flash.display::MovieClip/gotoAndStop()
at
mx.managers::SystemManager/::preloader_initProgressHandler()
at
flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.preloaders::Preloader/::timerHandler()
at flash.utils::Timer/flash.utils:Timer::_timerDispatch()
at flash.utils::Timer/flash.utils:Timer::tick()
ReferenceError: Error #1065: Variable
_LoaderStyle__embed_css_Assets_swf___brokenImage_416519517 is not
defined.
at flash.display::MovieClip/gotoAndStop()
at
mx.managers::SystemManager/::preloader_initProgressHandler()
at
flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.preloaders::Preloader/::timerHandler()
at flash.utils::Timer/flash.utils:Timer::_timerDispatch()
.................. much more error trace like
above...............
I have placed crossdomail.xml file at each and every part of
the application like at IIS and also at Tomcat.
But now luck with that.
Any thing am i missing?
Waiting for the suggestions and thanks in advance.
DeepakThis project properties is located at which folder? Is it inside I'm able to
see the different swcs inside there? The current sdk is 4.0.1?
And the wrong version of RSL, what's that by the way.
Really appreciate your response. -
Hi all,
I am using project server 2007 in virtual environment. Before some time, my project server queue service was not starting & it gave Error: 1053. Then server team made some small changes in registry & resolved the problem. After that queue service
was in running condition. But when any job goes into queue, it processed the job first, then after some processing, it goes into "waiting to be processed", and after some time it again starts processing. So, the project server queue is working very
very slow. I restarted queue, event, sql, timer services, but no benefit.
In log it is showing "Queue unable to interact with SQL.".
Please Help....
Thanks.
Thanks & Regards Pradeep GangwarHi Hrishi,
ULS log is as below:
===========================================================
02/12/2013 10:19:20.99 OWSTIMER.EXE (0x0460)
0x089C
Windows SharePoint Services Timer
5uuf Monitorable
The previous instance of the timer job 'Shared Services Provider Synchronizing Job', id '{AD482C7A-A6D5-4313-A4B6-3F5A78730F61}' for service '{54B6D7E9-6F24-459E-92AC-E11FB157B119}' is still running, so the current instance will be skipped. Consider
increasing the interval between jobs.
02/12/2013 10:20:10.58 w3wp.exe (0x04C0)
0x13FC
Windows SharePoint Services General
8m90 Medium
105 heaps created, above warning threshold of 32. Check for excessive SPWeb or SPSite usage.
02/12/2013 10:20:29.99 OWSTIMER.EXE (0x0460)
0x089C
Windows SharePoint Services Timer
5uuf Monitorable
The previous instance of the timer job 'Config Refresh', id '{5BA90EA2-D960-4F00-BF99-2C9C96056FB1}' for service '{46CB2006-65AC-40C6-9B5D-E2924F18B8CD}' is still running, so the current instance will be skipped. Consider increasing the interval
between jobs.
==========================================================
And in Event Viewer, it is showing:
==========================================================
Log Name: Application
Source: Office SharePoint Server
Date: 12-02-2013 10:14:02
Event ID: 7761
Task Category: Project Server Queue
Level: Error
Keywords: Classic
User: N/A
Computer: xyz
Description:
Standard Information:PSI Entry Point:
Project User: domain\epmadmin
Correlation Id: a5e020df-ee43-417f-b47c-a1f1142fe2cf
PWA Site URL: http://xyz/PWA
SSP Name: SharedServices1
PSError: Success (0)
An unxpected exception occurred in the Project Server Queue. Queue type (Project Queue/Timesheet Queue): ProjectQ. Exception details: CompleteGroup failed.
===========================================================================================================================================================
Log Name: Application
Source: Office SharePoint Server
Date: 12-02-2013 10:14:02
Event ID: 7758
Task Category: Project Server Queue
Level: Error
Keywords: Classic
User: N/A
Computer: xyz
Description:
Standard Information:PSI Entry Point:
Project User: domain\epmadmin
Correlation Id: a5e020df-ee43-417f-b47c-a1f1142fe2cf
PWA Site URL: http://xyz/PWA
SSP Name: SharedServices1
PSError: Success (0)
Queue SQL call failed. Error: System.Data.SqlClient.SqlException: Violation of PRIMARY KEY constraint 'PK_MSP_QUEUE_PROJECT_GROUP_ARCHIVE'.
Cannot insert duplicate key in object 'dbo.MSP_QUEUE_PROJECT_GROUP_ARCHIVE'.
===========================================================================================================================================================
Log Name: Application
Source: Office SharePoint Server
Date: 12-02-2013 10:14:02
Event ID: 7754
Task Category: Project Server Queue
Level: Error
Keywords: Classic
User: N/A
Computer: xyz
Description:
Standard Information:PSI Entry Point:
Project User: domain\epmadmin
Correlation Id: a5e020df-ee43-417f-b47c-a1f1142fe2cf
PWA Site URL: http://xyz/PWA
SSP Name: SharedServices1
PSError: Success (0)
Queue unable to interact with SQL. Queue type (Project Queue, Timesheet Queue etc):
ProjectQ Exception: Microsoft.Office.Project.Server.BusinessLayer.Queue.QueueSqlException: CompleteGroup failed --->
System.Data.SqlClient.SqlException: Violation of PRIMARY KEY constraint 'PK_MSP_QUEUE_PROJECT_GROUP_ARCHIVE'.
Cannot insert duplicate key in object 'dbo.MSP_QUEUE_PROJECT_GROUP_ARCHIVE'.
==========================================================
Thanks & Regards Pradeep Gangwar -
Urgent - Host Instances not starting. Error 1053 , In Biztalk Server 2010 Environment
Hi,
All host instances are down and when we try to start them we get the following error:
Windows could not start the Biztalk Service Biztalk Group :
HOST_NAME service on Local Computer.
Error 1053: The service did not respond to the start or control request in a timely fashion
We already restarted SQL, SSO and BizTalk. Any suggestions?
What is the impact of doing a BizTalk repair? Do I lose anything?
Thanks,
Regards,
Pedro ValaHi Pedro,
I think it's a known issue which is described
here
Maheshkumar
S Tiwari|User
Page|Blog|How
to Access an Orchestration variable in Map -
Error: 1053 Oracleas2ASControl service is not starting
Dear Experts,
As per my earlier question I am finding delay in sending messages. Now I have found an error in my operating system that Oracleoracleas2ASControl services is not starting. When I tried to start i found
Error 1053: The service did not respond to the start or control request in a timely fashion.
In my Architecture, I had 2-nodes,
on 1-node Oracle AS Infrastructure is installed and MT on the other. Infrastructure is working fine but I am facing Error 1053: The service did not respond to the start or control request in a timely fashion...when i trying to start service.
I need ur comments in solving this issue. My architechture is in production.
Your earliest response will be highly appriciated and helpful for me.
Thanks in advance,
Saqibhello,
what version of database are you running?
Is this problem resolved. I have just looked at your previous post.
rgds
Alan -
Hi,
I am installing Oracle 10g R1 on Windows XP. While installing there was following error:
Enterprise manager configuration failed due to the following error-
Error starting DBConsole. DBConsole could not be started successfully
You can retry configuring this database with Enterprise Manager later by manually running C:\oracle\product\10.1.0\Db_1\bin\emca scriptI ran this script manually from command prompt of Windows, it displayed some short-cut keys for help. After doing so, I am not able to bring up Enterprise Manager in my web browser using the web address http://localhost:5500/em. (It says "page not found")
What I need to do for installing it successfully?
Thanks,
MahanamMahanam wrote:
Hi,
I am installing Oracle 10g R1 on Windows XP. While installing there was following error:
Enterprise manager configuration failed due to the following error-
Error starting DBConsole. DBConsole could not be started successfully
You can retry configuring this database with Enterprise Manager later by manually running C:\oracle\product\10.1.0\Db_1\bin\emca script
I ran this script manually from command prompt of Windows, it displayed some short-cut keys for help. After doing so, I am not able to bring up Enterprise Manager in my web browser using the web address http://localhost:5500/em. (It says "page not found")
What I need to do for installing it successfully?
Thanks,
MahanamPl identify which version of XP - Home versions of Windows are not supported/certified.
http://download.oracle.com/docs/html/B10130_02/reqs.htm#sthref286
HTH
Srini -
VerifyError: Error #1053: Illegal override
Hello,
It's been 1 day that I am trying to resolve an issue
I did a clean up of my project and part of the clean up has been to switch my swf from FP 9 to FP 10
I have one SWF (FP 10) that loading another SWF (FP 10)
Whenever its trying to load the second one now I have
VerifyError: Error #1053: Illegal override of release_vars in com.videoplayer.RELEASES.MAIN_JUKEBOX_****.
The original release_vars function look like
public function release_vars():void
the override look like
override public function release_vars():void
GLOBALS.vars.ads_enabled = false;
GLOBALS.vars.playertype = "internal";
Nothing crazy
it was working fine
Any ideas ?
I found some other guys that had the same issue, but nothing resolve it :
http://beta.jalleyne.ca/2010/10/verifyerror-error-1053-illegal-override-of-isrelatedobject inaccessible-in-remappedmouseevent/
http://supportforums.blackberry.com/t5/Tablet-OS-SDK-for-Adobe-AIR/VerifyError-Error-1053- Illegal-override-of-requestSoftKeyboard/m-p/1163209#M30785The original release_vars function look like
public function release_vars():void
HERE IS THE CLASS : http://pastebin.com/jt0EumLF
the override look like
override public function release_vars():void
GLOBALS.vars.ads_enabled = false;
GLOBALS.vars.playerbrand = "***";
GLOBALS.vars.playertype = "internal";
GLOBALS.vars.server = "www.****.com";
GLOBALS.vars.stats_flags = {*****: true, ****: true, *****: true};
GLOBALS.vars.usingJukebox = true;
HERE IS THE CLASS WITH THE OVERRIDE : http://pastebin.com/msitEhn3
Some info are private that why I replaced by *** don't worry of that
Thanks for your reply.
Maybe you are looking for
-
Error while adding repository user
Hi, We have a repository and a user associated to that 10.2.0.3, we dropped repository owner (schema) and re created a fresh repository with out un regestering the repository_user(target) , after creating new repository we dropped the table (WB_RT_VE
-
Report with Prompt on Home Page
I have created a report with column prompt. I have also included this report in 'My Home Page custom report'. But when i access 'My Home Page' i dont see the Prompt, i only see the report with all columns & data. Have i skipped some step to include p
-
Excise Base amount is not updatinf in J_1IEXCDTL
Hi friends, this is Lokesh, I am having doubt regarding this issue. I also got same requirement to update that excise base amount in J_1IEXCDTL table i have written code as DATA : W_KONV TYPE KONV. CLEAR W_KONV. CLEAR KONV. READ TABLE KONV INTO W_KON
-
Hi, I've looked at past threads relating to the config of vat code determination and it seems that our current config setting for the tax calculation is set up correctly. Currently the config is defaulted to 'Tax Calculation occurs in backend' . Howe
-
how do I convert my address book from explorer to Safari? I am unable to download Explore anymore because it has been discontinued for the Mac.