Error 1053 issue.

Hi experts,
I have installed SAP BODS 3.2 SP3 in Windows Server 2008 R2 64 bit O.S.
When I am trying to open the Designer ( any other component) of SAP BODS it is throwing as error like ' Designer has stopped working'.
When I went to services.msc---> BusinessObjects Data Services service and checkd, it was not  'Started'. When I tried to Start the service, it is showing a warning like ' Error 1053: The services did not respond to start or control request in timely fashion'
Please check out the attached screen which might help you for the solution.
Can any one help me with this issue please.
Thanks in advance.

Hi Abhi,
Both your confugurations seem to be okay. I dont think that you should change anything in the DEP settings...
Update: I was just checking my DS3.2 on my Windeows server 2003 - here the DEP is enabled, but no program is checked in the selection box below.
I suggest you give it a try to change this setting - without specifiying any programs.
If that doesn't help - revert it again
As I do not run my Designer on Windows2008 I cannot test it myself.
But, I have another hint - check out wether this could apply to you (microsoft KB article 839174) :
FIX: You receive an "Error 1053: The service did not respond to the start or control request in a timely fashion&q…
regards
Greg
Message was edited by: Gregor Horvath

Similar Messages

  • Itunes 12.1.0.71 will not install on win 7 error 1053

    I have a BIG problem...cannot install 12.1.0.71...The install gets about 90% thru and then I get the error....Windows could NOT start Apple Mobile Device Services error 1053...The Service did not respond......after trying all the solutions I found online I called Apple support and paid 99$(which was not refunded) and two of their techs...the supposed top level Cathy...was unable to help....after two hours of work....they can remotely see and guide me as to what to try and it was mostly what was published online at apple support re how to really uninstall Itunes properly which we did about 6 times...and still it would not get past the "windows could not startt AMDS and errors 1053 and service did not respond and error 7 win error 193 and itunes helper not installed correctly....those later errors occur when you ignore that AMDS did not start...etc....
    So I am kind of stuck....
    Other things we tried....Disable Norton....Clean the registry using Norton Utilities....No other hidden Viruses around all clear on that....Win 7 totally updated....used the windows service that checks just about every kind of possible bug in system from the MS site...no help there...
    In the whole process I lost the ability to restore to an earlier version that worked that disappeared off the restore calendar.
    SO HELP!!!!!!!!!!!!!!????????????

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If the advice above doesn't resolve things you could try this alternate version:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
    Or roll back to the previous build:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    tt2

  • Error 1053 when trying to upgrade from BOE 3.0 Fix Pack 3 to BOE 3.1 Update

    Hi! I am trying to upgrade my BOE 3.0 FP3 Server to 3.1 (Update package, not full 3.1 install). The upgrade goes very well, and for a very long time, up until the very end. At the end when it tries to restart the Tomcat service it throws an error 1053 with the following message.
    The Apache Tomcat 5.5.20 service failed to start due to the following error:
    The service did not respond to the start or control request in a timely fashion.
    I also get this same message if I try to start the service through Control Panel -->  services or through CCM. The event viewer shows this message also in addition to the following..
    Timeout (30000 milliseconds) waiting for the Apache Tomcat 5.5.20 service to connect.
    Has anyone seen this before or know if this is a known error? I am hoping for a workaround so I dont have to backout or reinstall!
    Thanks!
    --Antonio

    Hi Antonio,
    Following information might help you to resolve the issue.
    Solution1:
    To resolve this behavior, use Computer Management to update the user profile so it is a member of the Administrators group, and then reboot the server to validate your changes.
    Solution2:
    You can disable DEP or add services to it:
    1.Right-click on My Computer and select Properties.
    2.Click the Advanced tab.
    3.In the Performances section click Settings.
    4.Click the Data Execution Prevention tab.
    5.Use the Add button on the bottom to add the service's executables and ensure the box is checked. Do this for each Crystal Enterprise service.
    Alternatively, you can disable DEP by checking the Turn on DEP for essential Windows programs and services only option. By doing so, it will disable DEP to all applications on the machine including Business Objects.
    Solution3:
    Increase the service time-out for Windows Services : http://support.microsoft.com/kb/839803http://support.microsoft.com/kb/886695
    Regards,
    Sarbhjeet Kaur

  • Windows Service Error 1053 - Service did not respond to start or control request

    I'm presuming it's logging on as a domain user.  Has that user got "Logon as a Service" rights?

    I've been working on this issue with our developers for the past week, and so far we're stumped. We have a Windows Service that was created in-house to process our customers imaging requests with assured delivery that are past the start date. We currently have this service, and a few others like it, running on 12 different bus servers. The servers all run .NET Framework 4.5, and all the other servers run it with no problem. This particular service bus gives us the "Error 1053" as so on as we try to start the service. I've increased the timeout to 60 seconds, but it was set at 30 before and it times out IMMEDIATELY after pressing start. I've uploaded the .config file we use. I modified the IP addresses for security reasons. The service logs on with an administrator password that has domain access rights. We've tested the connectivity...
    This topic first appeared in the Spiceworks Community

  • Urgent - Host Instances not starting. Error 1053 , In Biztalk Server 2010 Environment

    Hi,
    All host instances are down and when we try to start them we get the following error:
    Windows could not start the Biztalk Service Biztalk Group :
    HOST_NAME service on Local Computer.
    Error 1053: The service did not respond to the start or control request in a timely fashion
    We already restarted SQL, SSO and BizTalk. Any suggestions?
    What is the impact of doing a BizTalk repair? Do I lose anything?
    Thanks,
    Regards,
    Pedro Vala

    Hi Pedro,
    I think it's a known issue which is described
    here
    Maheshkumar
    S Tiwari|User
    Page|Blog|How
    to Access an Orchestration variable in Map

  • Error: 1053 Oracleas2ASControl service is not starting

    Dear Experts,
    As per my earlier question I am finding delay in sending messages. Now I have found an error in my operating system that Oracleoracleas2ASControl services is not starting. When I tried to start i found
    Error 1053: The service did not respond to the start or control request in a timely fashion.
    In my Architecture, I had 2-nodes,
    on 1-node Oracle AS Infrastructure is installed and MT on the other. Infrastructure is working fine but I am facing Error 1053: The service did not respond to the start or control request in a timely fashion...when i trying to start service.
    I need ur comments in solving this issue. My architechture is in production.
    Your earliest response will be highly appriciated and helpful for me.
    Thanks in advance,
    Saqib

    hello,
    what version of database are you running?
    Is this problem resolved. I have just looked at your previous post.
    rgds
    Alan

  • VerifyError: Error #1053: Illegal override

    Hello,
    It's been 1 day that I am trying to resolve an issue
    I did a clean up of my project and part of the clean up has been to switch my swf from FP 9 to FP 10
    I have one SWF (FP 10) that loading another SWF (FP 10)
    Whenever its trying to load the second one now I have
    VerifyError: Error #1053: Illegal override of release_vars in com.videoplayer.RELEASES.MAIN_JUKEBOX_****.
    The original release_vars function look like
    public function release_vars():void
    the override look like
    override public function release_vars():void
                                  GLOBALS.vars.ads_enabled = false;
                                  GLOBALS.vars.playertype = "internal";
    Nothing crazy
    it was working fine
    Any ideas ?
    I found some other guys that had the same issue, but nothing resolve it :
    http://beta.jalleyne.ca/2010/10/verifyerror-error-1053-illegal-override-of-isrelatedobject inaccessible-in-remappedmouseevent/
    http://supportforums.blackberry.com/t5/Tablet-OS-SDK-for-Adobe-AIR/VerifyError-Error-1053- Illegal-override-of-requestSoftKeyboard/m-p/1163209#M30785

    The original release_vars function look like
    public function release_vars():void
    HERE IS THE CLASS : http://pastebin.com/jt0EumLF
    the override look like
    override public function release_vars():void
                                  GLOBALS.vars.ads_enabled = false;
                                  GLOBALS.vars.playerbrand = "***";
                                  GLOBALS.vars.playertype = "internal";
                                  GLOBALS.vars.server = "www.****.com";
                                  GLOBALS.vars.stats_flags = {*****: true, ****: true, *****: true};
                                  GLOBALS.vars.usingJukebox = true;
    HERE IS THE CLASS WITH THE OVERRIDE : http://pastebin.com/msitEhn3
    Some info are private that why I replaced by *** don't worry of that
    Thanks for your reply.

  • FIM Password Reset Client Service error 1053 when starting service - what is the minimum permissions set?

    Hi,
    I've installed Password Reset Client Service on a machine with locked down GPO settings. Now, service, running under NETWORK_SERVICE account doesn't start (Service Control Manager reports error 1053 after waiting 30 seconds for the service to respond during
    start).
    If I change service account to some other account (i.e. domain account), service runs fine and I am able to reset password successfully, so there is no issues with password reset infrastructure, firewall, etc..). Problem is only with NETWORK SERVICE not
    having enough permission to do its job.
    Unfortunately, there is no event log entries in neither of relevant event logs (Application, Security, System, Forefront Identity Manager) that would provide additional information on why service doesn't start. ProcessMonitor tracing revealed only, that
    service cannot access some of the registry entries. After granting permissions, service still refuses to start.
    What I'd like to know is there a list of permissions, configuration entries, that NETWORK SERVICE needs in order to run normally?
    If that is not available, does anybody have any idea, how to find out what is preventing NETWORK SERVICE account from running that service?
    Thank you and best regards,
    P

    Fatih,
    The above often solves it because this disabled CRL checking for the account running the service. As the service is the network service, it has no scope off of the box, so the machine account is typically used and many shops have policies in place that prevent
    this. If the above entry doesn't help, try using your account as the service account. If that works, then its probably a syntax problem with above entry. If it fails with your account too then its most likely not CRL checking.  There is
    a registry key that can be configured that could assist:
    [HKEY_LOCAL_MACHINE \System \CurrentControlSet \Control]
    ServicesPipeTimeout = 30000
    Try setting this to another value higher than 30000. This value is milliseconds. I would also look at network capture and verify if we are indeed attempting to go to the Internet during service startup.

  • Error #1053: Illegal override of subtopic in mx.messaging.Consumer

    Having some issues here....
    Fresh install of FlexBuilder 2.01
    Created a New Flex Project, Selected Flex Data Services
    (compile locally)
    When I compile the .mxml and it opens in a browser window, I
    get the following Flash player error:
    VerifyError: Error #1053: Illegal override of subtopic in
    mx.messaging.Consumer.
    at flash.display::MovieClip/nextFrame()
    at mx.managers::SystemManager/::deferredNextFrame()
    at
    mx.managers::SystemManager/::preloader_initProgressHandler()
    at
    flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at mx.preloaders::Preloader/::timerHandler()
    at flash.utils::Timer/flash.utils:Timer::_timerDispatch()
    at flash.utils::Timer/flash.utils:Timer::tick()
    options to Dismiss All or Continue
    when I select Continue I get the following error:
    TypeError: Error #1009: Cannot access a property or method of
    a null object reference.
    at mx.managers::SystemManager/::docFrameHandler()
    I've got no problems with a Basic Flex Project, but FDS is
    causing issues...
    any assistance greatly appreciated!

    I am getting this message and updated my flash player to
    version 9.0.45 and now flex is saying that it can't find a valid
    version of the flash player and that I may need to install flash 9
    or reinstall flex. I did both of these and it did not work. Does
    anyone have any suggestions. I have been complete incapable of
    setting up a coldfusion flex development environment on xp that
    works. I installed CF into IIS and it is working fine. I have
    installed FB 2 as a default install. I then went step by step
    through this tutorial (
    http://www.kylehayes.info/captivate/QueryToDatagrid/QueryToDataGrid.htm)
    and ran the application and it blows up. I would REALLY like to
    learn flex and begin to develop some applications but I can't get
    my apps to run because of this stupid error. Any suggestions. Bug
    fixes. Anything???
    Thanks,
    Jason Presley

  • I keep getting error 1053 while trying to upgrsde Itunes for PC

    I keep getting error 1053 while trying to upgrsde Itunes for PC

    I was getting -3231 and kept seeing references online about routers and firewalls and connectivity issues.  I merely turned off my WiFi and went hardwired with ethernet and problem solved.  Give it a try and see if it works for you.

  • Could not start Biztalk Service Biztalk Group: Error 1053 , In Biztalk Server 2010 environment

    Hi,
    I am getting following error while starting Biztalk 2010 service
    Error message :
    Windows could not start the Biztalk Service Biztalk Group :
    BizTalkServerApplication service on Local Computer.
    Error 1053: The service did not respond to the start or control request in a timely fashion
    Please suggest.
    Thank you.
    Warm Regards,
    Anant Patil.

    When did this issue start?
    Did you install something? Some update? To OS, to SQL Server, to BizTalk?
    Did you deploy some BizTalk artifacts?
    If so, try to undo this software.
    Were there some changes in network?
    Leonid Ganeline [BizTalk MVP]
    BizTalk: Sample: Context Routing and Throttling with orchestration

  • HPWSProAdapter: Error 1053

    Hello,
    I noticed today that on my Web Jetadmin server (v10.3 SR6, Windows 2008) the HPWSProAdapter service was not running. I tried to start it and got the following error:
    Error 1053: The service did not respond to the start or control request in a timely fashion
    After a few hours reseaching I cannot find what is causeing this issue. There have been no major changes lately that I now of. I tried uninstalling all windows updates for the last month and a half but that didn't change anything. 
    I also tried setting the service account up to use a network service account instead of the default "Network Service".
    Any ideas for what might be causing this issue and what I can do to fix it?
    I apprecaite the help!
    Reese
    This question was solved.
    View Solution.

    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    I hope this helps!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Error 1053 the oracle(8.1.6) service is not starting on a fresh windows 2000 install

    Can anyone help!!!!!!!!
    Oracle service does't start on windows 2000 gives error:
    Could not start the oracle service on Local computer
    Error 1053: The service did not respond to start or control
    request in a timely fashion.

    Can anyone help!!!!!!!!
    Oracle service does't start on windows 2000 gives error:
    Could not start the oracle service on Local computer
    Error 1053: The service did not respond to start or control
    request in a timely fashion. This is what I did to start the oracle service..
    1. Change the startup type to manual in the windows service panel
    2. Restart the Windows 2000 PC
    3. Start the Oracle service by clicking the start button in the services window.
    4. It will hit the same error ie 1053..
    5. Now kill the oracle process using windows Task Manager
    6 Once again go back to services window and click the start button
    7. It will show the status meter window with a close button..
    8. After the status meter crosses halfway hit the close button..
    9. Your oracle process is started now..

  • Is anyone else having Config error 16 issue when trying to start PSE 12 or Premier Elements after Mac upgrade to Yosemite 10.10 on iMac

    Is anyone else having Config error 16 issue when trying to start PSE 12 or Premier Elements 12 after the Mac upgrade to OS X Yosemite 10.10 on iMac. I have had a number of issues with software and things after upgrading to OS X Yosemite 10.10 and even 10.10.1.  I have uninstalled and reinstalled both PSE 12 and Premier Elements 12 a number of times and everything goes fine until its ready to launch and then you get an error message. Numerous uninstalled and reinstalls don't removing the problem.  Strangely enough  PSE 11 still appears to boot up and I never owned Premier Elements 11 so I don't know if it will start. I thought with Apple dropping its Apeture software and greater integration of iPhoto and Apeture files into Lightroom 5.7 all would be harmonious between these two players. Im not sure where Adobe wants us to go it recently removed the plugin to allow you to update files from LR to Adobe Revel, whats up with that. I now own two version of Adobe software that no longer work with my Mac and now way of uploading pictures from Lightroom to Revel. Needless to say I am pretty reluctant to sign on to a subscription of Creative Cloud with long term financial obligations when I can't even get my current Adobe software to work independently much less integrate with Lightroom. Frustrated with it all!

    Get rid of 'put disks to sleep when possible' and you may see a dramatic improvement (not necessarily a cure).
    That specific problem is a multiple-Processor (including graphics processor) problem, where one of the processors lost track of whether it should be responding to interrupts. You may have a Hardware problem.

  • TS1567 Itunes wont download because Apple Mobile Device cannot be used due to error 1053

    i bought an ipod touch 4th generation for my friend. She could not download Itunes beacause of the Apple mobile device not being able to activate due to an ''error 1053''... That error is something about not having the correct amdinistator privileges. I tried to run the download as the administrator but i needed the administrator password she said that she cant remember the password, actually she said that there was never a password. Is there maybe a way to dowload the Apple Mobile Device again so that she can download Itunes?

    Its because your mobile device isnt started. Heres how to restart it: http://support.apple.com/kb/TS1567

Maybe you are looking for