Error 1053: The service did not respond to the start or control ...

Dear SapService,
I've installed a BI7.0 (ABAP only) instance on cluster with :
windows 2003 x64 SP2
SQL server 2005 x64 SP2
WAS 7.00 kernel 80
*the service runs with domain user.
I've upgraded to kernel 114 (latest). After the upgrade the ASCS service doesn't start. It throws error:
"Error 1053: The service did not respond to the start or control
request in a timely fashion"
To solve this problem I've tried:
-go back to kernel 80 but I still get the same error.
-start the service manually on the second node. Still same error.
-restart the two servers and try again to start the service on the
nodes.
Any ideas ?
Please advice,
Dimitry Haritonov

Hi,
Check SAP Note 82751 - Problems with SAP Services & SAP Service Manager
for some initial investigation.
Regards,
Siddhesh

Similar Messages

ID 53 Details: The service did not respond to the start or control request in a timely fashion (0x8007041D))

One of my clients has his dpm server turned off for a long time. Now when that server is back online I cannot re-sync backup. First was database in suspect mode and I was not able to acess dpm console. Now when I fix that I cant re-sync job. I even tried
to delete on PG and recreate it but without success. Agent showing OK and it can comunicate with server. I have even tried to uninstall agent and re-install it but without luck.
ID 53 Details: The service did not respond to the start or control request in a timely fashion (0x8007041D))
That is the error what I get on all protection groups. Is there any one who can help with this?
And last thing is that DPM is crushing on recovery tab

Hi
Do you still need assistance with this?

Error 2186: The service is not responding to the control function

Every time I start the Messaging Server I get an error message. The server
is running and no event log errors are reported. I see:

Could not start the <%hostname%> on <%computername%>.
Error 2186: The service is not responding to the control function.

This occurs because the system does not have enough remaining memory to
create a new desktop heap for the service being started.

The limit can be raised, but doing so requires changing registry entries to
allow more but smaller desktop heaps for Windows NT services.
The best solution is to limit the application connector instances to seven
or less.

For instance, you may make a change from 0 (zero) to 1 (one):

HKEY_LOCAL_MACHINE
SYSTEM
ControlSet001
Control
Session Manage
HeapDeCommitTotalFreeThreshold

Or press Ctrl-F to find "heap".

Nvd,
I'm sorry to hear about the problems that you are running into with your DAQCard. I can understand your frustration with the errors that you are seeing. You mention that you have tried to do some troubleshooting, I was wondering if you have tried all the troubleshooting techniques listed in this KnowledgeBase:
http://digital.ni.com/public.nsf/websearch/DCFCDB240788F8D486256D6A00834D80?OpenDocument
If you have tried all of those things, I would suggest one additional thing to try. I would suggest updating your NI-DAQ drivers to version 7.0. These drivers are the newest versions of our Data Acquisition Drivers, and can be downloaded from our website here:
http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C128D?OpenDocument&
node=132060_US
If you have tried all of the above troubleshooting options, please post a detailed description of what you have tried. This may help to clarify what is going wrong.
Jed R.
Applications Engineer
National Instruments

Windows Phone Emulator is unable to connect to the Windows Phone operating system: The phone did not respond to the connect request. Some functionality might be disabled

We are receiving following error, while trying to deploy the application on Win Phone emulator. “Windows Phone Emulator is unable to connect to the Windows Phone operating system: The phone did not respond to the connect
request. Some functionality might be disabled.”
I have tried all possible ways that we found on blogs. We are still not able to solve this issue

I have had a lot of issues with the emulator in the past.
Check out this troubleshooting guide. It might help:
https://msdn.microsoft.com/en-us/library/windows/apps/jj681694(v=vs.105).aspx
Also, I find that if I cancel my build/deploy while it is stuck on booting the OS and then wait a short while the phone OS will complete booting, and from that point I can deploy to the emulator. It's a workaround, but it works well for me.
I need to do that on Windows 10 tech preview, which may or may not be simply an incompatibility with the beta OS.
I'm a self-taught noob amateur. Please take this into account when responding to my posts or when taking advice from me.

This item could not be crawled because the repository did not respond within the specified timeout period. Try to crawl the repository at a later time, or increase the timeout value on the Proxy and Timeout page in search administration. You might also wa

HI,
I got the error message in the crawl log as below after performing the Full Crawl
This item could not be crawled because the repository did not respond within the specified timeout period. Try to crawl the repository at a later time, or increase
the timeout value on the Proxy and Timeout page in search administration. You might also want to crawl this repository during off-peak usage times.
To overcome the above error,many forums have suggested me to increase the time out which is under Farm level settings.But if time out gets increased,performance impacts as well.
So please suggest me to overcome this error without increasing the timeout.Thanks in advance
Regards,
Sudheer
Thanks & Regards, Sudheer

Hi,
I understand that you get the error message when performing a full crawl. I have seen similar cases caused by IE proxy settings. You can try to edit the Internet Options>Connections>LAN settings. Uncheck ‘Automatically detect settings’.
For more information, please refer to this site:
Search error: crawler could not connect to the repository:
http://social.technet.microsoft.com/forums/en-US/sharepointadminprevious/thread/c230ab36-8d0b-4c25-bf86-33136d17642b/
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

Error: Device\Ide\iaStor0, did not respond within the timeout period.

Hello,
In last few months, I began getting the error:
The device, \Device\Ide\iaStor0, did not respond within the timeout period.
My system hangs and slows to a crawl. Error seems to be well-known, and solution is to install the latest version of Intel Matrix Manager, which is 8.6. I've done this, I reinstalled my OS, and I've reinitialized my hard Raid1 array. None of this has helped.
http://www.intel.com/support/chipsets/imsm/sb/cs-025783.htm
Any suggestions?
Thx.
Scott

Quote
Have you tested HDD's with Seagate diagnostic utility?
Going by the link you have provided I assume you are using Vista?
Yes, I am using Vista and I did also use Sea Tools; no issue identified. I'd love to hear more suggestions. Things I've done:
1. Reformat / reinstall. Helped, but problem not eliminated.
2. Ran SeaTools Disk Diagnostic. No issue.
3. Installed Intel Matrix STorage, most recent version 8.6. Should've fix prob, but didn't.
4. Upgraded Bios from 7.5 to 7.9.
Seems like the upgrade to Intel Matrix Storage Manager should've fixed this issue, but it didn't. Any particular drive identified in the error message in the original post?
It is also not clear what changed to have introduced this error. My system has been stable for 2 years and from the errors looks like I've had problems for the last 3 months, but they got notably worse in the last 2 weeks. Reformatting / reinstall helped, but didn't eliminate these issues. Any insight would be appreciated.

Error: 1053 Oracleas2ASControl service is not starting

Dear Experts,
As per my earlier question I am finding delay in sending messages. Now I have found an error in my operating system that Oracleoracleas2ASControl services is not starting. When I tried to start i found
Error 1053: The service did not respond to the start or control request in a timely fashion.
In my Architecture, I had 2-nodes,
on 1-node Oracle AS Infrastructure is installed and MT on the other. Infrastructure is working fine but I am facing Error 1053: The service did not respond to the start or control request in a timely fashion...when i trying to start service.
I need ur comments in solving this issue. My architechture is in production.
Your earliest response will be highly appriciated and helpful for me.
Thanks in advance,
Saqib

hello,
what version of database are you running?
Is this problem resolved. I have just looked at your previous post.
rgds
Alan

An error 1069 - )The service did not start due to logon failure) occurred while performing this service operation ...

Hi All,
We seem to be being plagued by the error below by our SQL Server agent. This happens almost everytime we restart the server that has been running for a day or two.
Our SQL Server Agent uses a none expiring domain credential. I understand that this problem only happens when the profile being used by the SQL Servr Agent has changed (password change). What puzzles me is that the login is A ok and no changes has been made to it's password.
We always resolve this problem by changing the login used in the SQL Server Agent to local and after that, returning it back to it's original domain login. Unfortunately, we cant always do this everytime something goes wrong.
Can anyone please help us shed a light on this? We're using SQL2k with SP3a. Thanks!
Error:
An error 1069 - )The service did not start due to logon failure) occurred while performing this service operation on the SQLServerAgent service.
Regards,
Joseph

Ran into this error, and the password was correct. What the System Event Log said:
Code SnippetEvent Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7041
Date: 10/8/2008
Time: 9:33:09 AM
User: N/A
Computer: ComputerName
Description:
The SQLSERVERAGENT service was unable to log on as DomainName\SQLAgent with the currently configured password due to the following error:
Logon failure: the user has not been granted the requested logon type at this computer.
Service: SQLSERVERAGENT
Domain and account: DomainName\SQLAgent
This service account does not have the necessary user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed, a Group Policy object associated with this node might be removing the right. Check with your domain administrator to find out if this is happening.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp
...sure enough it had been removed from the "Logon as a service" list. Hope this helps.

'error 1069 - (The service did not start due to a logon failure) in BAM

I installed BAM on XP SP2, i do have IIS configured and XE DB, after installing when i tried starting the services as per post-installion guide.i did found the error 'An error 1069 - (The service did not start due to a logon failure).In google i could find a remedy saying
Remedy: Go to Start /Programs / Administrative tools / Services. Right-click the Goodlink Server and select Properties. Click the Log On tab. Retype the correct password. Start the Goodlink service.
i did so but did found the same error.So i tried changing a few things in LogOn tab such as " Earlier it was logging in from machine name and pwd , since it gave an error" i changed it to local system account ." now all services of BAM have started except Oracle BAM Active Data cache.
Anyone pls rep how do i resolve this? Do i need to re-install? i need this to be done very urgently.

Windows XP is not a certified platform for BAM. However, the product works fine on XP for evaluations and demos. For production, use a certified/supported version of Windows as is documented in the Software System Requirements section of the BAM Install Guide.
All Postinstall steps apply to all versions of Windows that BAM runs on except for the Postinstall step called "Required Configuration for Microsoft Windows Server 2003". As indicated by the step name, this one is for W2003 only.
"network not found windows 53 error" is generally a network, account or password issue. Please follow the Install Guide step by step to avoid installation issues like this.
See "Troubleshooting Start Page Issues" for start page problems.
As indicated in the Install Guide, you can use host names or IP addresses:
"12. On the Configure location of Oracle BAM step, enter the host name or the IP
address where each component is to be installed, even if it is not being installed at
this time, then click Next."
Regards, Stephen

Why does ichat video not connect? The error message says we did not respond.

Why does ichat video not connect? The error message says we did not respond.

Hi,
iChat uses several port as they are called over the internet to do different things
Text Chats and Video Chats are on different Ports.
You probably don't have the port open.
Use UPnP in your router if it has it.
8:59 PM Sunday; August 12, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

The embedded controller (EC) did not respond within the specified timeout period - Flex 15D

Hello,
I have an IdeaPad Flex 15D, and I have had several problems (mostly processor-related) in the time I have been using it. I contacted Customer Support twice, and finally did a system reset a few days ago after being told by Lenovo Support that my choices for fixing the problem were 1) Reset, or 2) Pay for a premium service to diagnose the problem. Needless to say (again), I went with option 1. So far I have not had any noticible problems with the processors, but there is a certain error showing up in the Event Viewer that I am concerned about. Lenovo Support has been next-to-useless troubleshooting my problems thus far, so I'm taking them here. The error is as follows:
(Event ID 13)
The embedded controller (EC) did not respond within the specified timeout period. This may indicate that there is an error in the EC hardware or firmware or that the BIOS is accessing the EC incorrectly. You should check with your computer manufacturer for an upgraded BIOS. In some situations, this error may cause the computer to function incorrectly.
Sounds like the BIOS needs an update, right? Well, I went straight to the Flex 15D drivers page, and guess what? I quote the drivers page: Bios update is not required for this product. Not required? So, Lenovo ships a broken BIOS and then refuses to support it? I don't know if Lenovo employees ever read this forum, so this might not be the best way to get their attention, but I am so fed up with Customer Support and I want this issue to be known to more than just a few unhelpful 'tech support' people. The Flex 15D isn't one of the more popular laptops out there, so I can't expect anyone reading this to be able to duplicate this problem or really provide any support, but if you have any suggestions whatsover, please reply to this thread. Like I said, I want people to know, and hopefully we can get Lenovo's attention so they can fix this problem.
Best regards,
Owen Dugmore

Hi,
I understand that you get the error message when performing a full crawl. I have seen similar cases caused by IE proxy settings. You can try to edit the Internet Options>Connections>LAN settings. Uncheck ‘Automatically detect settings’.
For more information, please refer to this site:
Search error: crawler could not connect to the repository:
http://social.technet.microsoft.com/forums/en-US/sharepointadminprevious/thread/c230ab36-8d0b-4c25-bf86-33136d17642b/
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

New-SPWOPIBinding throws "WARNING: The server did not respond".

Hi,
 I have installed the office web apps in another server. Which is in another domain, sharepoint server is in another domain. Both were in various Lan. I am now trying to configure the office web apps in sharepoint.
When i enter the command
New-SPWOPIBinding -ServerName <WacServerName> -AllowHTTPI get an error as WARNING: The server did not respond. Trying again (attempt 1 of 5).
WARNING: The server did not respond. Trying again (attempt 2 of 5).
WARNING: The server did not respond. Trying again (attempt 3 of 5).
WARNING: The server did not respond. Trying again (attempt 4 of 5).
WARNING: The server did not respond. Trying again (attempt 5 of 5).
New-SPWOPIBinding : Sorry, we have encountered an error and New-SPWOPIBinding
has failed.
At line:1 char:1
+ New-SPWOPIBinding -ServerName server.contoso.local -AllowHTTP
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 + CategoryInfo : NotSpecified: (Microsoft.Share...tNewWOPIBinding
 :SPCmdletNewWOPIBinding) [New-SPWOPIBinding], SPCmdletException
 + FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletNewWOPIB
 indingI don't know what i was missing. i don't have idea what to do. Can anyone how to resolve this and why it's showing.I already checked the link http://blog.blksthl.com/?s=https#step3. But i couldn't understand this. can anyone tell me what to do. What am i missing !Thanks in advance,Rajendran.K

Hi Paul,
i hve the same problem and i can get the XML in Sharepoint server but when i execute this:
PS C:\Users\administrador> New-SPWOPIBinding -ServerName XXXXXXXXXXXXX
.com -AllowHTTP
WARNING: The server did not respond. Trying again (attempt 1 of 5).
WARNING: The server did not respond. Trying again (attempt 2 of 5).
WARNING: The server did not respond. Trying again (attempt 3 of 5).
WARNING: The server did not respond. Trying again (attempt 4 of 5).
WARNING: The server did not respond. Trying again (attempt 5 of 5).
New-SPWOPIBinding : Sorry, we have encountered an error and New-SPWOPIBinding
has failed.
At line:1 char:1
+ New-SPWOPIBinding -ServerName XXXXXXXXXXXX.com -AllowHTTP
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (Microsoft.Share...tNewWOPIBinding
:SPCmdletNewWOPIBinding) [New-SPWOPIBinding], SPCmdletException
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletNewWOPIB
inding
i use HTTPS and that is the only error text from SP logs. I can ping owa server from Sharepoint server (internal and external URL). both machines are in the same VLAN.
what can i check to verify i have everything OK?
many thanks.
josetellan

New-SPWOPIBinding Failing with "The server did not respond"

I am currently attempting to create a binding between my SharePoint environment and our Office Web Apps server.
I am able to connect to the Office Web Apps server when I allow HTTP connections (on both the Web Apps Server and the SharePoint server) and create the binding using the -AllowHTTP command but am unable to connect to the server when trying over HTTPS.
I have created a DigiCert UCC certificate for the Office Web Apps server that uses the common name of the DNS CNAME entry for the Office Web Apps server (owas.contoso.com) and includes the FQDN of the server in the SAN (saowas.contoso.local).
I can ping the Office Web Apps server from the SharePoint server and can hit https://owas.contoso.com/hosting/discovery over HTTPS from the SharePoint server, and have disabled the firewalls on both servers.
When I attempt to run New-SPWOPIBinding -Servername "owas.contoso.com"
on the SharePoint server it quickly gives me the WARNING: The server did not respond. Trying again (attempt 1 of 5)
errors.
Any help would be appreciated.

You can check the ULS logs, found in the 15 hive, by default:
%ProgramFiles%\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
I would recommend a log viewer though. There are several out there (I use the first one):
http://archive.msdn.microsoft.com/ULSViewer
http://ulsviewer.codeplex.com/
http://sharepointlogviewer.codeplex.com/

PCI DIO 32HS (6533) Suddenly giving "The device is not responding to the first IRQ level" error, and no longer functioning.

Greetings NI folks,
I'm an oceanographer, and have an sidescan sonar data aquasition computer running Windows XP SP2, and NiDAQ 7.0 (Legacy). For several years, this machine has worked flawlessly, but today, I booted it up to test the system for an upcoming job, and I got some strange errors in our sonar program. I tranced the problem to our NI-6533 PCI-DIO-32HS card. I launched NI Automation Explorer to test that the card was responsive, and when I click the "test panel", I get an error: "The device is not responding to the first IRQ level." Continue (yes/no). If I click yes, I can test the digital i/o's, but nothing happens, and all the tests fail (nonresponsive). I tried moving the card to another PCI slot, tried forcing it to have a specific IRQ that was unused by anything else, and finally tried moving it to another computer that had never been used with the DIO card. I'm still getting the error, and the card is nonresponsive. I'm at the limit of my abilities, and would like to know if there's anything else I can do, or should we send the card back to NI for repair/diagnosis.
Thanks.

Duplicate Post
Best Regards
Hani R.
Applications Engineer
National Instruments

I've purchased a phone Yvonne appeared that the phone was stolen , and you connect with the owner of the phone did not respond to Vkpf you helped me , because I have to pay a sum of money and did not know that the phone was stolen

I've purchased a phone Yvonne appeared that the phone was stolen , and you connect with the owner of the phone did not respond to Vkpf you helped me , because I have to pay a sum of money and did not know that the phone was stolen

Return it. If you can't return it, turn it over to the police and consider this a life lesson.

Error 1053: The service did not respond to the start or control ...

Similar Messages

Maybe you are looking for