Error 1053 when starting the Routing And Remote Access service

Hi all,
When I tried to start the "Routing And Remote Access" service on Windows 8.1 I got an error message as follow.
Could some one help me please.
Than's.

Hi MRAB,
Please check if all dependences are enabled first.
Then set the start type to Automatic.
Does this issue still occur after a restart?
Alex Zhao
TechNet Community Support

Similar Messages

Routing And Remote Access Service: Error 1068: The dependency service or group failed to start

Hi,
I tried to establish a PPP connection between my windows 8.1 PC and another kind of machine using an USB cable. So, as usual on Windows XP and Windows 7,
I configured the COM in the modem list and I tried to start the
"Routing And Remote Access" service and then
I got this message.
So any idea why is failing?
Please help!
Thanks thaks thanks

Hi,
Was your issue resolved?
If no, please reply and tell us the current situation in order to provide further help.
Karen Hu
TechNet Community Support

Windows 2012 routing and remote access service with same subnet

I have internal server IP range -192.168.1.0/24
Windows routing and remote access service with vpn client IP -192.168.11../22
client side IP subnet is -192.168.1.0/24
So we wan routing \ NATING between 192.168.1.0/24 to 192.168.11.0/22 so if vpn user try to ping 192.168.11.5 it should internally forward all request to 192.168.1.5
Don't forget to mark helpful or answer connect me :- http://in.linkedin.com/in/satya11 http://facebook.com/satya.1000

Hi,
According to your description, my understanding is that VPN client and internal network has the same IP range -192.168.1.0/24. And you want to transfer internal network from IP address 192.168.1.0/24 to 192.168.11.0/22.
Agree with Charles David’s point of view. The easiest way to fix routing confusion would be to either change the VPN subnet or the VPN client subnet.
Or, if you configure Windows Server(RRAS) as VPN server, you may enable NAT to transfer internal IP address:
1. Open RRAS, add NAT.
2. New interface to NAT and configure it as public interface.
3. Open Address Pool tab, add IP address range 192.168.11.0/22.
4. Click Reservations, add reserved IP(192.168.11.0/22) and corresponding internal IP(192.168.1.0/24) one by one.
This would be a lot of workload. Besides, you may use 3rd party devices to transfer subnet IP addresses.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Routing and Remote Access fails to install

Hello, I recently installed Windows Server 2008 beta 3 onto my new computer, which went smothly. I have ADDS, DHCP, DNS, IIS, Terminal Services, and Network Policy and Access Service installed and they all work perfectly. However, I recently tried to install Routing and Remote Access, but I got the following error message when I finished the configuration wizard: "Installation of the Routing and Remote Access Service failed because: Class not registered (80040154). Whats causing this, and how do I fix this?

I also have this trouble of an error when installing Routing and Remote Access "class not registered..."
It is a Windows Server 2008 RTM clean install.
Added machine to our Windows 2003 domain and then after reboot added Windows Powershell.
Logged in as domain admin and then when tried to add routing and remote access got the message described by everyone else.
Like others I need to know how to get over this problem.

Would you tell me If window server installed with "routing and remote access" can output firewall logs.

I install "routing and remote access" into Window Server and make it work as a firewall.
When connections are accepted or denied at firewall, would you tell me if the firewall can output the logs ?
If that function can, would you tell me how to configure ?
Thanks.

Hi Kohenro31,
I'm a little confused about configuring RRAS to work as firewall, cause we usually deploy RRAS as VPN connection, router etc, would you please post more information in detail?
Routing and Remote Access Service：
http://technet.microsoft.com/en-us/library/cc754634(v=ws.10).aspx
In addition, to view firewall event logs please check this article:
Viewing Firewall and IPsec Events in Event Viewer:
http://technet.microsoft.com/en-us/library/ff428140(v=WS.10).aspx
To enable RRAS logs, please check this article:
Enabling logs for RRAS:
http://blogs.technet.com/b/rrasblog/archive/2005/12/22/enabling-logs-for-rras.aspx
If I have any misunderstanding, please let me know.
Best Regards,
Anna Wang

Routing and Remote Access VPN DHCP error

I have a strange problem.
I have a client that is using Server 2012 Standard.
On this server they have Routing and Remote Access configured for VPN client access. Their users that are working outside the office connect to the VPN to access the internal network.
The VPN works fine for the most part. Recently however, it has started having issues.
Periodically (about once every 8 days) I will hear from them that they cannot connect and that they get error 720. I will check the server and the server will have the following errors in the event log:
Warning: No IP address is available to hand out to the dial-in client.
If you check DHCP the server is running fine and will hand out local addresses but it will not hand out addresses to VPN clients. Also the addresses that it HAS previously handed out to VPN clients will not show in the address leases.
The solution strangly enough is to disconnect and reconnect a the VPN client connection that the server has connecting it to a offsite server that it does a SQL sync with.
Any ideas as to what might be causing this? If need be I can post more detailed logs but I am not sure what logs even to post or what data to collect.
Any help is greatly appreciated.

I am experiencing the same issue on a Windows 2008R2 SP1 RAS server. The above statement About increasing the lease time on DHCP does not resolve the problem.
I am also Searching for a Solutions to this issue.
Up to now I have done the Following :
1. Increased the scope/ cleared IP's in DHCP.
2. Ensure that the DHCP server is accessable.
3. Created a Manual Scope on RRAS configurations settings (then clients can connect but cannot access resources on the network). Changing Back to DHCP, you recieve the same 720 Error.
4. Stop and started the DHCP services on the DHCP Server.
5. Stop and Started RRAS Services on RRAS server.
The Only Indication is, that DHCP for some reason does not lease out Addresses to the RRAS server..

Error 8 when starting the extracting the program-data load error:status 51

Dear all,
I am facing a data exracton problem while extracting data from SAP source system (Development Client 220). The scenario and related setting are as the flowings:
A. Setting:
We have created 2 source system one for the development and another for the quality in BW development client
1. BW server: SAP NetWeaver 2004s BI 7
PI_BASIS: 2005_1_700 Level: 12
SAP_BW: 700 Level:13
Source system (Development Client 220)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: SunOS
Source system (Quality Client 300)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: HP-UX
B. The scenario:
I was abele to load the Info provider from the Source system (Development Client 220), late we create another Source system (Quality Client 300) and abele to load the Info provider from that,
After creating the another Source system (Quality Client 300), initially I abele to load the info provider from both the Source system , but now I am unable to load the Info provider from the (Development Client 220),
Source system Creation:
For both 220 and 300, back ground user in source system is same with system type with same authorization (sap_all, sap_new, S_BI-WX_RFC) And user for source system to bw connection is dialog type (S_BI-WX_RFC, S_BI-WHM_RFC, SAP_ALL, SAP_NEW)
1: Now while at the Info Package : Start data load immediately and then get the
e-mail sent by user RFCUSER, and the content:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
2:Error in the detail tab of the call monitor as under,
bi data upload error:status 51 - error: Error 8 when starting the extracting the program 
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
 IDoc sent to SAP system or external program"
r/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
 Error 8 when starting the extraction program
Info IDoc 1 : Application document posted (green)
 r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
 IDoc sent to SAP system or external program"
 bw side: "IDoc: 0000000000007089 Status: Application document posted,
 IDoc was successfully transferred to the monitor updating"
Have attached screen shots showing error at BW side.
 check connection is ok, tried to restore the setting for bw-r3 connection though same problem
 Have checked partner profile.
what's wrong with the process? 
Best regards,
dushyant.

Hi,
 Refer note 140147.
Regards,
Meiy

Error 8 when starting the extraction program

HI all
I have the following problem when i start an extraction. "Error 8 when starting the extraction program" I test the Extraction program on the R/3 system(source system) and it works, It displays records. On the target system in the infpk under step-by-step it gives you the error and It does not give a oss number, it only suggest that you need to look for a OSS. We have BW 3.5 installed with ECC 5.0.
Also on the source system Tcode WE02, for the load period id displays the IDOC with a red light with the same error. It displays the partnet, basic type and the port, the Error is marked next to inbound(inbox).
Regards
alex

Alex,
Check the following OSS notes
947690
511475
23538
Even though the note 947690 is for process chain the steps mentioned in this note could cause Error 8 when scheduling a package for extraction. I think in your case the server name or the host name is incorrect. Check the host and the server name in TCODE SM51 and ask basis to look for the same in RFC entries using SM59 as well.
Abdul

Failed to execute with the error Error occurred when starting the parser: t

Dear All
I am getting this error
""A database error occurred. The database error text is: The MDX query SELECT { [DASKA1EDEL2DMLXTQ62S595QV].[DB7BP4A8AMQTUD3DPEEPS4J87] } ON COLUMNS , NON EMPTY CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( [0CALMONTH].[LEVEL01].MEMBERS, [DASKFZ1TRFOLNTG78G0HH2B87].MEMBERS ), [0MATERIAL].[LEVEL01].MEMBERS ), [0PLANT].[LEVEL01].MEMBERS ), [0COMP_CODE].[LEVEL01].MEMBERS ), [0ACTDELDATE].[LEVEL01].MEMBERS ) DIMENSION PROPERTIES MEMBER_NAME, MEMBER_CAPTION ON ROWS FROM [0IC_C03/ZMATSTOCK] failed to execute with the error Error occurred when starting the parser: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'. (WIS 10901)""
I already went to similar kind of error solution in forum,but this error is coming for one web I query,all other reports are working fine.
I already implemented note 1032461

Hi,
Under normal circumstances it should be enough to restart the connection service.
As far as we know there is no formal solution to this problem from SAP yet but restarting the connection service is much less of an interuption compared to restarting the the SIA.
Re-starting the connection service should resolve this issue. since, Connection service is only related to DeskI and Rich Client re-statrng wonu2019t impact other business objects components including java report panel.
All the Best,
Madhu....

Error 8 when starting the extraction program (BI7.x)

I am receiving the following message when loading from the ODS to the data targets:
Error 8 when starting the extraction program
Message no. R3019
Diagnosis
Error 8 occurred when starting the data extraction program.
System response
The data extraction is terminated.
Procedure
Check for relevant OSS Notes, or create a problem message of your own.
I have searched the forums and OSS, and can't find anything that matches my situation exactly. I was originally getting an error message that the infosource (80FIA_DS11) didn't exist in the source system. I restored the BIP client and all transfer structures were reactivated. Now when I try to load, I get this error 8. Has anyone experienced this issue?
Thanks,
Pam

Josko,
I am also using BI 7.x and had the problem loading from DSO to Infocube. What are the entries in table ROIDCPRMS? What is the host name displayed when you run transaction SM51 in the BI system?
Pam

Error 4 when starting the extraction program

Hello Gurus,
Yesteday I got one error "Error occured in the source system"that "Error 4 when starting the extraction program" and "error in the source system" has given, it has affected all the loads,please any one give me solution for thia it is urjent.
Please find the error message bello.
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
An error occurred in Service API .
Check the error message.
Procedure
The procedure for removing errors takes place depending on
the error message:
Note
If the source system is a Client Workstation, then it is possible that the file that was to be loaded was being edited at the time of the data request. Make sure that the file is in the specified directory and is
Thanks,
Muddu Reddy.

Hi sekhar,
You can try this. you right click on the datasource and click on display in source system it takes you to the R/3 system enter the user id and password so u can now see the datasource in the R/3 so now click on back f3 so now u vl be in BI now replicate the datasource and try to load the data. I think now it should work fine.
Tell me if you still face some problem.
Thanks
Ram

Bi data upload error:status 51 - error: Error 8 when starting the extr prog

while data load form the source system into thw bw i am getting error in error monitor as under,
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
                                IDoc sent to SAP system or external program"
r/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
                               Error 8 when starting the extraction program
Info IDoc 1 : Application document posted (green)
   r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
                 IDoc sent to SAP system or external program"
   bw side: "IDoc: 0000000000007089 Status: Application document posted,
                 IDoc was successfully transferred to the monitor updating"
what to do at r/3 side?
Best regards,
dushyant.

Josko,
I am also using BI 7.x and had the problem loading from DSO to Infocube. What are the entries in table ROIDCPRMS? What is the host name displayed when you run transaction SM51 in the BI system?
Pam

Set value when a virtual, analog modem should answers in Server 2012 Routing and Remote Access

Hi there,
I googled for hours on the following problem:
We have a Routing and Remote Access Server with an Dialogic Diva PRI card (30 lines). The card provides an analog, virtual modem pool. All this runs on Windows Server 2012 (without R2).
My problem is that the client will be connected after 3 or 4 rings on the line (I can not hear properly with our client device), but it should be connected after the first ring.
Under Server 2000 there was the possibility to set the value "NumberOfRings" in the registry and / or set the modem to ATS0 = 1. Both ways do not work in Server 2012.
Can anyone tell me how it works under 2012?
Thanks and regards
Andre

I assume you followed Dialogic's instructions for configuring the device on Windows Server 2012. It would most likely make more sense to contact Dialogic if you are having issues. They support the product. If it is not working according
to their configuration instructions, they are in the best position to be able to answer your questions.
. : | : . : | : . tim

When synchronizing my iphone4 on the computer it errors out when optimizing the photos and shuts down iTunes. Any idea what to do to get the synch working?

When synchronizing my iphone4 on the computer it errors out when optimizing the photos and shuts down iTunes. Any idea what to do to get the synch working?

OKay, here is the deal. You cannot change the location of encrypted files nor can you share them with other machines. There is no file server for iTunes so even if you export the movie index from iTunes to an external volume, each time you reboot your computer itunes has to reindex the external drive every time you want to access the files. The second you run your mobile computer without the external drive or try to access the HD movies from another device or another user on the same network, the indexing gets out of synch. The entire process is self defeating regardless. The HD movies are encapsulized by apple to stream to your devices via iCloud and NOT via Cloud. Only your TV can play 1080p. That single file you download from iTunes has mutiple versions of the same video in the capsul, one version for each type of apple device. There are no 1080p apple devices except for the Apple TV. When you buy a movie you are buying a license and not the movie. It's going to get worse with all the new copywrite laws. Already you cant share any apple devices with other itunes accounts. Your airport express just stopped streaming music to all users on the local home sharing Cloud. Only the one user for each device and soon only airplay speakers connected directly to the device. No more passthru via your TV and no more file sharing with other accounts on the same wi-fi. All the ISPs are doing the same thing. And soon everybody will be buying their phones and TV's and iPads from the cabble guy.
Apple has done a poor job of educating the consumer as to the difference between the Cloud and iCloud. They are not the same at all.
Message was edited by: ronfromwoodland hills

Active directory domain services stopped after removing routing and remote access role

Hello everyone;;
I am in deep trouble.. I did install routing and remote access and then lost connection to the server remotely. Then I connected a monitor to the server and removed the role... then it asked me to restart the server . After logging back in I found
all my active directory service has gone... I can see red cross on active directory domain services.. Also I am able to ping other pcs but other pcs cannot ping my server..
However when I go into the active directory services, it shows all services are running except file replication service. I have tried to start that service but it give error 1053 error..
My server in between loses LAN connection... I dont know what is going on.. Please help!!!
My server is win 2008 R2 ser pack 1
Only one DC....
Has fixed ip,
no DNS server running..

Hi,
The File Replication Service Start Error 1053 error can be caused by damaged Windows system files. Corrupted system files entries can threaten the well-being of your computer. Many events can result in creating system file errors.
Please refer to the articles below to troubleshoot the issue:
File Replication Service Start Error 1053
http://repairerrors.net/file-replication-service-start-error-1053.html
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error 1053 when starting the Routing And Remote Access service

Similar Messages

Maybe you are looking for