Error 1054013 when attempting to refresh from planning

I get the error 1054013: Syntax error loading filters - operation canceled when attempting to refresh from planning. I refreshed the security filters but it did not fix the problem. Has anyone else experienced this or does anyone have an idea on the root cause? Thx in advance.

I remember seeing this. There is a filter that is not working. You should open the filters of the application in question and verify. Was there metadata changes (dimensions) that the filter references? This could be the culprit.

Similar Messages

  • Error 1054013 when attempting to refresh database from planning

    I get the error 1054013: Syntax error loading filters - operation canceled when attempting to refresh the database from planning. I refreshed the security filters but it did not fix the problem. Has anyone else experienced this or does anyone have an idea on the root cause? Thx in advance.

    HiThis is actually an Essbase issue. If you stop and start the application it shoudl stop happeningNot sure what causes it, but seems to be long filters (generally created from Planning). It would be worth speaking with Hyperion or checking on the knowledge base for any further info.I have previously cleared the security file and recreated which clears the problem. Hope this helpsAndy Kingwww.analitica.co.uk

  • Error message when attempting to upload from Flip camera

    When attempting to download flip videos, I get a message stating that usb device was disabled because it was taking too much power from the computer.
    This just started suddenly.  I'd downloaded video from the same camera to this MacBookPro just the day before.  What is causing this and what can I do about it?

    Hi there,
         Install the latest update of Adobe Application Manager from the below link:
    http://www.adobe.com/applicationmanagerpatch/
    Regards,
    Jairaj

  • Mapping Error: INSUFFICIENT_ACCESS_ON_CROSS_REFERENCE_ENTITY when attempting to Upsert from a Flat File source to SFDC Account and Contact target

    I'm getting an INSUFFICIENT_ACCESS_ON_CROSS_REFERENCE_ENTITY error when running a mapping that attempts to Upsert data from a Flat File to SFDC Account and Contacts.  I also tried to split The error message for Account: WRITER_2_*_1> WRT_8164 [2015-07-26 08:49:57.707] Error loading into target [Account] : Error received from salesforce.com.  Fields [].  Status code [INSUFFICIENT_ACCESS_ON_CROSS_REFERENCE_ENTITY].  Message [Please enter a value for Country].WRITER_2_*_1> CMN_1053 [2015-07-26 08:49:57.707] : Rowdata: ( RowType=1(update) Src Rowid=1 Targ Rowid=1 Upsert is based on the External ID: Account_External_ID__c The error message for Contact: WRITER_1_*_1> WRT_8164 [2015-07-26 08:49:55.305] Error loading into target [Contact] : Error received from salesforce.com.  Fields [].  Status code [INSUFFICIENT_ACCESS_ON_CROSS_REFERENCE_ENTITY].  Message [Please enter a value for Country].WRITER_1_*_1> CMN_1053 [2015-07-26 08:49:55.305] : Rowdata: ( RowType=0(insert) Src Rowid=1 Targ Rowid=1 Upsert is based on the External ID: Contact_External_ID__c Any ideas on how to proceed?

    Hello,Can you please help me understand that limitations of the free data loader? In this link  - http://www.informaticacloud.com/editions-integration.html# - I see the below features listed.No-code, wizard driven cloud integrationMulti-tenant SaaS solutionDatabase and file ConnectivityFlexible schedulingBulk API support (for Salesforce.com)Unlimited rows/day24 jobs/day1 Secure AgentLimited to 1 userCommunity supportCloud Data MaskingQuestions:When I view licenses in my free data loader, under Feature Licences, it shows the License type for Salesforce Connectivity/Bulk API as “Trial”. Can’t I create a scheduled Data Synch task to upsert records in Salesforce using Bulk API mode?Is the email notification option (for success, warning and failure of data synch task) available on the free version (and not as a trial)?I understand there is a limit of 24 jobs/day. But is there a limit on the number of scheduled data synch tasks that can be created?Data Masking is listed as a feature above for the free edition. However, when I view the licenses in my free data loader, Data Masking is shown as “Trial”. Can you please clarify this?Is there a limit on the number of Connections that can be created?ThanksSanjay

  • AirPlay error 15006 when attempting to play from iTunes

    I am using a 2011 MacBook Pro running OS X 10.7.4 an iTunes 10.6.1.
    My wireless network consists of a Xfinity/Arris TG852G/CT modem/router and a AirPort Express (firmware v 7.6.1).  I have firewall turned off on the router and on my Mac.
    Whenever I attempt to play via AirTunes from my iTunes on my MacBook Pro I get the following error message:
    An unknown error (-15006) occurred while connecting to the AirPlay device “AirPort Express”.
    The strange thing is that I am able play music via AirPlay from my iPad or iPhone with no issues. 
    I've tried resetting the AirPort Express multiple times and rebooting everything (Mac, Router, AirPort Express).  Still this issue persists.  (I have also tried using different AirPort Express, same results).
    Any suggestions?

    Doesn't work for me, still get this and then everything you described:
    Never get Orange home broadband is my advice!

  • Error 15006 when attempting to play from iTunes

    I am using a 2011 MacBook Pro running OS X 10.7.4 an iTunes 10.6.1.
    My wireless network consists of a Xfinity/Arris TG852G/CT modem/router and a AirPort Express (firmware v 7.6.1).  I have firewall turned off on the router and on my Mac.
    Whenever I attempt to play via AirTunes from my iTunes on my MacBook Pro I get the following error message:
    An unknown error (-15006) occurred while connecting to the AirPlay device “AirPort Express”.
    The strange thing is that I am able play music via AirPlay from my iPad or iPhone with no issues.
    I've tried resetting the AirPort Express multiple times and rebooting everything (Mac, Router, AirPort Express).  Still this issue persists.  (I have also tried using different AirPort Express, same results).
    Any suggestions?

    i just fixed this for my setup
    I am running macOSX 10.8.2
    my airport utility is 6.1
    I have an Airport extreme connected through ethernet to my modem
    i then have my aiport express downstairs bridged to my extreme through wifi
    first go to your airport utilitie's "internet" tab
    Then click advanced
    I just set both of my airport devices to "configure IPV6 Automatically"
    with the IPV6 mode of "Native"
    Make sure they are both set up this way
    thats it, it works now
    Good luck

  • I am getting "a network error occurred while attempting to read from the file c:\windows\installer\itunes.msi" when I attempt to download itunes, can someone help me with this?

    I am getting "a network error occurred while attempting to read from the file c:\windows\installer\itunes.msi" when I attempt to install itunes.  Can anybody help me to resolve this issue?

    You can try disabling the computer's antivirus and firewall during the download the iTunes installation
    Also try posting in the iTunes forum since it is not an iPod touch problem.

  • ???  I just installed Lightroom 5 from Amazon for my Mac with 10.10.1 software.  When I open it I get: "An error occurred when attempting to change modules".  It won't import photos and has no side panels under Library.  What should I do?

    I just installed Lightroom 5 from Amazon for my Mac with 10.10.1 software.  When I open it I get: "An error occurred when attempting to change modules".  It won't import photos and has no side panels under Library.  What should I do?

    I Nearly bought from Amazon too but I found a thread from Adobe stating that the only recognized outlet for lightoom is themselves and other outlets serial numbers will not be guaranteed.
    THat at was sufficient for me to buy direct from Adobe, hope you get it sorted.

  • When attempting a restore from Time Machine I get error code -8004. What is this and how can I correct it?  Thanks

    when attempting a restore from Time Machine I get error code -8004. What is this and how can I correct it?  I use OX 10.9.3
    Thanks

    Run it in compatibility mode and input the credentials.
    Mylenium

  • Have downloaded new Lightroom 5.4 from CC. When trying to launch am getting following error message and then Lightroom crashes: "an error occurred when attempting to change modules". Can't find a thread which relates to this error message.

    Have downloaded new Lightroom 5.4 from CC. When trying to launch am getting following error message and then Lightroom crashes: "an error occurred when attempting to change modules". Can't find a thread which relates to this error message.

    Hi 99jon,
    Many thanks for that. Had been going through this list yesterday and now again today:
    Ref  Solution 1: Lightroom is at its latest update
    Ref  Solution 2: It's interesting how I cannot find the Preferences file anywhere on my mac. (new mac pro, OS 10/9.2) . . .
    Ref  Solution 3: Lightroom doesn't allow me to do anything after the error message appears
    Ref  Solution 4: don't have any Nik Software plug-ins
    Ref  Solution 5: checked permissions and changed all to "Read & Write" - makes no difference
    Ref  Solution 6: I don't have a different user account on my mac.
    Not sure what else to do.

  • Just purchased Lightroom 5 from Best Buy, Registered, installed...but cannot open it due to the error message "An error occurred when attempting to change modules"..Please help.?.

    error message don't allow me to open Lightroom 5. "An error occurred when attempting to change modules"...Please Help..!

    I'm in the same situation exactly. I would like to delete, uninstall LR, and then reinstall to see if that will go anywhere. Will I loose my option for a second computer install later???

  • I have Lightroom 5 installed on my MacBook Air but when I try to open the program I receive the message "An error occurred when attempting to change modules".  I uninstalled, emptied trash and re-installed but I continue to get the same message.

    I have Lightroom 5 installed on my iMac which I downloaded (uploaded?) to my MacBook Air (via wi-fi) but unlike the iMac, I'm unable to use the program on the MacBook Air.  When I open the program on the iMac and click 'file', (as people using the program would know) there are 21 options - import pics, export, etc, etc - however, in the version on the MacBook Air, opening 'file' gives me four options - New Catalogue, Open Catalogue, Page Setup and Printer - and with that comes the pop-up message "An error occurred when attempting to change modules".  Any ideas please?

    A forum thread from 3 years ago talking about LR 1.x which had this problem seems to need permissions fixed or new folders created with the corrected permissions.  You might try doing a repair permissions for your user and/or run LR as an administrator user.  I am a PC person so cannot tell you exactly how to do that.
    https://forums.adobe.com/message/1457020

  • I updated itunes to 10.4, my ipod touch was wiped clean then errored (2003) when attempting to restore, now my ipod is clear. I have tried disabling my antivirus, no luck.

    I updated itunes to 10.4, my ipod touch was wiped clean then errored (2003) when attempting to restore. Now my ipod is clear, when I turn it on I get the "Connect to itunes screen", this never goes. I have tried disabling my antivirus, to allow me to restore with no luck.
    When I go into itunes I get the message - itunes has detected an ipod in recovery mode. You must restore this ipod before it can be used with itunes,
    how am I supposed to do this ?
    I would rather take the ipod to someone to do the restoration - I still have itunes with all of my downloads on my computer, I dont want to risk losing this as I can re-install onto my ipod when it is sorted.

    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on): If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.
    Above from:
    http://support.apple.com/kb/TS3694
    It may be more than you security software.
    Do you have access to another computer you can use to restore the iPod to factory defaults/new iPod?

  • While updating the older version iTunes to latest one it shows "a network error occurred while attempting to read from the file: C:\windows\installer\iTunes64.msi. pls help on this matter to connect my i5 to PC. Thanks in advance

    while updating the older version iTunes to latest one it shows "a network error occurred while attempting to read from the file: C:\windows\installer\iTunes64.msi. pls help on this matter to connect my i5 to PC. Thanks in advance

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page): 
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Error message when attempting to use scanner Canon model MP610

    Error message when attempting to use scanner Canon model MP610, any one have any fixes, suggestions?

    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, empty trash, reboot when complete.
    For the other problems...
    See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
    http://support.apple.com/kb/PH7029
    Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
    How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.
    In the Memory tab of Activity Monitor, are there a lot of Pageouts?

Maybe you are looking for