Error 1067 while starting oracle css service in XP
Error 1067 while starting oracle css service in XP
Hi all,
I have installed Oracle10g in windows xp ...
I am unable to connect from my application . On viewing the services, oracleCSService is not yet started eventhough it is automatic . While manually starting it
its showing an error
"Could not start the oracleCSService on Local Computer
Error 1067: Process terminated Unexpectedly...."
I hope somebody can help me on this !!
Thanks
Similar Messages
-
Getting Error 2140 while starting Oracle Apache Server in 11.5.6 Apps
We are on Oracle Apps R11.5.6 on Win NT 4.0.
When I tried to stop and start the Oracle Apache Server service, the service stopped normally but did not start at all. The error is as given below:
When I try to start Apache Server through the services, I get the following error:
"Could not start the OracleApacheServerTEST service on \\son1052.
Error 2140: An internal Windows NT error occured."
When I try to start Apache Server through the command prompt, I get the error:
The OracleApacheServerTEST service is starting.
The OracleApacheServerTEST service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
D:\oracle\testcomn\admin\scripts>goto end
D:\oracle\testcomn\admin\scripts>echo "adapcctl.cmd exiting with status 2"
"adapcctl.cmd exiting with status 2"
D:\oracle\testcomn\admin\scripts>net helpmsg 3534
The service did not report an error.
EXPLANATION
The service did not report an error.
ACTION
Try the task later. If the problem persists, contact your network administrator.
What might be the problem?
Any help would be greatly appreciated.
Thanks in Advance.
Praveen
[email protected]Login from svrmgrl and shutdown the db and then restart the db now start the service and it must start. This problem comes when you restart the server. I hope this will solve your problem.
[email protected] -
Error While starting Oracle APPS services in windows
While starting the Oracle Applications services in windows, it gives some memory error, "unable to read memory XXXXXX".
Is it possible to recreate the services alone?
How i can solve the problem with out re-Installation?johnveslin,
I would recommend to theck HW.
Disk. Memory etc.
Yury -
Error while starting the shared service server
Hi john,
I am getting the following error while starting the shared service server.
*25 Jul 2009 10:26:39 - org.apache.slide.common.Domain - ERROR - Unable to migrate hub groups to css*
So shared service console is not starting.
Please tell me the solution for it.
Thanks
Edited by: user11358816 on Jul 24, 2009 10:06 PM
Edited by: user11358816 on Jul 24, 2009 10:09 PMHi John,
Yes,It was working earlier.
When I have added NTLM authentication for FDM I am getting that error,but instead of that if
I am adding the authentication provider as LDAP(CSS) I am not getting that error.
So finally i have added only one authentication provider and that is LDAP(CSS).
I fallowed ur document for integrating the FDM application with planning application.(http://john-goodwin.blogspot.com/2008/07/planning-v11-drill-back.html )
For the global logon information I have given admin and password , which I have given while adding the LDAP authentication (CSS).
I am getting machine profile missing error when i clicked on the dimension and the target dimension test box contain connection failed.
Can u suggest me where am I wrong?
Thanks
Edited by: user11358816 on Jul 26, 2009 9:42 PM -
Hi.. I have HP-UX 11.00 server where oracle 8i is running.. from yesterday while starting database i am getting error. Please let me know the reason and way to sort out this issue.
++++++++++++++++Error While starting oracle++++++++++++++++++++++
startup
ORACLE instance started.
Total System Global Area 1253846036 bytes
Fixed Size 76820 bytes
Variable Size 622977024 bytes
Database Buffers 614400000 bytes
Redo Buffers 16392192 bytes
Database mounted.
ORA-01157: cannot identify/lock data file 3 - see DBWR trace file
ORA-01110: data file 3: '/ora8/oracle/oradata/pandb/rbs01.dbf'Due to the name,missing database file belongs to the rollback tablespace,
Database is down, was it shutdown CLEANLY (NORMAL or IMMEDIATE)? In this case do the following:
Remove the entries of all the rollback segments belonging to the
tablespace to which the lost datafile belonged from the
ROLLBACK_SEGMENTS parameter in the init.ora file, or simply comment
out the above parameter in init.ora.
Mount the database in restrict mode --- STARTUP RESTRICT MOUNT;
Offline drop the datafile;
Open the database
Drop all rollback segments belong the the tablespace
Drop and recreate tablespace
Recreate rollback segments
Otherwise you have to perform media recovery.
Werner -
Solaris SMF configuration for Oracle CSS service
Below is the code to create oracle CSS service with solaris SMF, it will create smf service with instance name as "default" where as i need to change it to "css"
svc:/application/oracle/css:default
change service instance name to
svc:/application/oracle/css:css
i don't know about smf and xml, can somebody help me to change css service name ?
<?xml version="1.0"?>
<!DOCTYPE service_bundle SYSTEM '/usr/share/lib/xml/dtd/service_bundle.dtd.1'>
<!-- $Id: oracle-database-css.xml,v 1.4 2006/03/19 21:19:40 joomul Exp $
The contents of this file are subject to the terms of the
Common Development and Distribution License, Version 1.0 only
(the "License"). You may not use this file except in compliance
with the License.
You can obtain a copy of the license at
http://www.opensource.org/licenses/cddl1.php
See the License for the specific language governing permissions and
limitations under the License.
Copyright 2005, 2006 Joost Mulders.
This document contains a service definition for the
Cluster Synchronization Services (CSS) process.
This process is required for ASM and RAC. It should be started via smf(5)
only for *non-RAC* systems. On RA clusters, this daemon is started via crs.
-->
<service_bundle type='manifest' name='oracle-database-css'>
<service
name='application/oracle/css'
type='service'
version='1'>
<create_default_instance enabled='false' />
<!-- CSS depends on multi-user. That takes care of details like filesystem -->
<dependency
name='multi-user'
grouping='require_all'
restart_on='error'
type='service'>
<service_fmri
value='svc:/milestone/multi-user:default' />
</dependency>
<exec_method
type='method'
name='start'
exec='$ORACLE_HOME/bin/ocssd'
timeout_seconds='30' >
<method_context>
<method_credential
user='oracle'
group='dba'
supp_groups=':default'
privileges=':default'
limit_privileges=':default' />
<method_environment>
<envvar name='ORACLE_HOME' value='/u01/app/oracle/product/10.2.0.1/asm_1' />
</method_environment>
</method_context>
</exec_method>
<exec_method
type='method'
name='stop'
exec=':kill'
timeout_seconds='60' >
<method_context>
<method_credential
user='oracle'
group='dba'
supp_groups=':default'
privileges=':default'
limit_privileges=':default' />
<method_environment>
<envvar name='ORACLE_HOME' value='/u01/app/oracle/product/10.2.0.1/asm_1' />
</method_environment>
</method_context>
</exec_method>
<!-- ocssd.bin does not detach -->
<property_group name='startd' type='framework'>
<propval name='duration' type='astring' value='child' />
<propval name='modify_authorization' type='astring'
value='solaris.smf.manage.oracle.database' />
</property_group>
<property_group name='general' type='framework'>
<propval name='modify_authorization' type='astring'
value='solaris.smf.manage.oracle.database' />
<propval name='action_authorization' type='astring'
value='solaris.smf.manage.oracle.database' />
</property_group>
<stability value='Unstable' />
<template>
<common_name>
<loctext xml:lang='C'>
Oracle Cluster Synchronization Services (CSS)
</loctext>
</common_name>
<documentation>
<doc_link
name='Intro to Oracle Clusterware and Oracle Real Application Clusters'
uri='http://download-east.oracle.com/docs'/>
</documentation>
</template>
</service>
</service_bundle>Edited by: sachinonnet on Jan 12, 2010 2:01 AMHi,
i got the solution as below
removed below line from service xml
<create_default_instance enabled='false' />
created another xml file for instance xml, where i specified the name of instance.
<?xml version="1.0"?>
<!DOCTYPE service_bundle SYSTEM '/usr/share/lib/xml/dtd/service_bundle.dtd.1'>
<!-- $Id: oracle-database-instance.xml,v 1.12 2006/03/12 19:51:20 joost Exp $
The contents of this file are subject to the terms of the
Common Development and Distribution License, Version 1.0 only
(the "License"). You may not use this file except in compliance
with the License.
You can obtain a copy of the license at
http://www.opensource.org/licenses/cddl1.php
See the License for the specific language governing permissions and
limitations under the License.
Copyright 2005,2006 Joost Mulders.
This document contains a service definition for an Oracle database instance.
It contains some instance specific variables like ORACLE_SID and ORACLE_HOME.
These must be filled in below.
Other -generic database- service properties are inherited from the parent
service, 'application/oracle/database'.
A database instance can be brought under SMF control by:
* running /lib/svc/method/ora-smf autoimport
*OR*
* filling in the blanks (marked with '' or ':default') below
* svccfg import <file>
-->
<service_bundle type='manifest' name='oracle-database-instance'>
<service
name='application/oracle/database'
type='service'
version='1'>
<dependency name='oracle-asm' grouping='require_all' restart_on='none' type='service'>
<service_fmri value='svc:/application/oracle/database:ASM' />
</dependency>
<!-- The SMF instance name MUST match the database instance -->
<instance name='PDB' enabled='false'>
<method_context
working_directory='/u01/app/oracle/product/10.2.0.1/db'
project=':default'
resource_pool=':default'>
<!--
The credentials of the user with which the method is executed.
-->
<method_credential
user='oracle'
group='dba'
supp_groups=':default'
privileges=':default'
limit_privileges=':default'/>
<method_environment>
<envvar name='ORACLE_SID' value='pdb' />
<envvar name='ORACLE_HOME' value='/u01/app/oracle/product/10.2.0.1/db' />
</method_environment>
</method_context>
<!--
A generic options property group for this database.
This property group has currently only one variable: instance_type.
instance_type describes the type of database instance. It's value can be
RDBMS or ASM. RDBMS denotes a classic database instance and ASM is a storage
manager instance.
-->
<property_group name='options' type='application'>
<stability value='External' />
<propval name='instance_type' type='astring' value='RDBMS' />
<propval name='modify_authorization' type='astring'
value='solaris.smf.manage.oracle.database' />
</property_group>
</instance>
</service>
</service_bundle> -
Error message while starting database
Hi all,
I am getting the following error message while starting the database . I just modified the DB_CACHE_SIZE parameter from 781MB to 781(+500MB) .We are using Oracle 9.2.0.1 in Windows server 2003 . The database starts fine with old parameter value.I searched in Metalink and in Google but no exact solution for this error . Can any body of you help me in this regard.. It is urgent....
C:\Documents and Settings\mishelpdesk.MISSERVER>d:
D:\>set oracle_sid=MISAPP1
D:\>sqlplus /nolog
SQL*Plus: Release 9.2.0.1.0 - Production on Thu Jun 15 06:32:31 2006
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL> connect sys as sysdba
Enter password:
Connected to an idle instance.
SQL> startup pfile='D:\oracle\admin\MISAPP1\pfile\init.ora';
ORA-27102: out of memory
OSD-00022: Message 22 not found; product=RDBMS; facility=SOSD
O/S-Error: (OS 8) Not enough storage is available to process this command.
Thanks in Advance...
Govind.Your problem is an OS, not Oracle problem, so it wouldn't help to play around with different init.ora parameters, as long as the basic problem persists. The note addresses W2K, you are on W2003, that may the reason for the different OSD error numbers.
For more information about AWE see on metalink
Implementing Address Windowing Extensions (AWE) or VLM on Windows Platforms
Note:225349.1
Werner -
Install OEM 12c fails on "start oracle management service". win2008
Windows Server 2008 R2 Enterprise SP1 x64
Oracle Database 11g release 11.2.0.3.0
I install OEM 12c(12.1.0.3) following this manual: Installing Enterprise Manager System
before start i've installed WebLogic Server 10.3.6 and aplied 2 patches specified in this manual
installation type is advanced, small, so i have created database from the appropriate template
i also installed cygwin and started ssh-service
the installation of OEM process fails on 73% "start oracle management service" with this message:
INFO: oracle.sysman.top.oms:Starting OMS ...
INFO: oracle.sysman.top.oms:Executing command: cmd /c set NEED_EXIT_CODE=1&&C:\Oracle\Middleware\oms\bin\emctl.bat start oms
INFO: oracle.sysman.top.oms:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.oms:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.oms:Windows service OracleManagementServer_EMGC_OMS1_1 failed to be started
INFO: oracle.sysman.top.oms:Oracle Management Server is Down
INFO: oracle.sysman.top.oms:Please check C:/Oracle/gc_inst/em/EMGC_OMS1\sysman\log\emctl.log for error details
SEVERE: oracle.sysman.top.oms:Starting of OMS failed.
in C:/Oracle/gc_inst/em/EMGC_OMS1\sysman\log\emctl.log i got this:
2013-09-06 12:24:27,012 [main] ERROR commands.BaseCommand logAndPrint.620 - Oracle Management Server Could Not Be Started
Check EM Server log file for details: C:\Oracle\gc_inst\user_projects\domains\GCDomain\servers\EMGC_OMS1\logs\EMGC_OMS1.out
2013-09-06 12:24:27,012 [main] INFO commands.StartCommand startOMS.337 - startOMS finished with result: 1
2013-09-06 12:24:30,974 [main] INFO commands.StartCommand startOMS.371 - net start return code is 2
2013-09-06 12:24:30,974 [main] ERROR commands.BaseCommand logAndPrint.620 - Windows service OracleManagementServer_EMGC_OMS1_1 failed to be started
2013-09-06 12:24:34,094 [main] INFO commands.BaseCommand printMessage.404 - statusOMS finished with result: 8
2013-09-06 12:24:34,094 [main] ERROR commands.BaseCommand logAndPrint.620 - Please check C:/Oracle/gc_inst/em/EMGC_OMS1\sysman\log\emctl.log for error details
and in C:\Oracle\gc_inst\user_projects\domains\GCDomain\servers\EMGC_OMS1\logs\EMGC_OMS1.out this:
<06.09.2013 12:24:01 ICT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 23.25-b01 from Oracle Corporation>
<06.09.2013 12:24:01 ICT> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for 13349651 Thu May 24 10:18:28 IST 2012
WebLogic Server Temporary Patch for BUG14482558 Fri Jan 11 11:20:16 IST 2013
WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
<06.09.2013 12:24:03 ICT> <Info> <Security> <BEA-090065> <Getting boot identity from user.>
Enter username to boot WebLogic server:Error: Failed to get value from Standard Input
Enter password to boot WebLogic server:
<06.09.2013 12:24:04 ICT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.management.ManagementException: Booting as admin server, but servername, EMGC_OMS1, does not match the admin server name, EMGC_ADMINSERVER
at weblogic.management.provider.internal.RuntimeAccessService.start(RuntimeAccessService.java:67)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:881)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:568)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:469)
at weblogic.Server.main(Server.java:71)
>
<06.09.2013 12:24:04 ICT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
wlst:
wls:/offline>
what I did wrong? how to start WLS server?Hi,
First of all with EM 12.1.0.x any version you are not required to install wls separately, we have single installer for em and wls. Is there any specific reason you installer wls separately?
Coming back to your issue: can you check
%OMS_HOME%\BIN>emctl istart oms completes successfully.
%OMS_HOME%\BIN>emctl istop oms completes successfully.
Also open an SR with Oracle support and share the number. We should debug such issue through SR so that we can share logs and come find a root cause. -
An error occurred while starting "OCMRepeater". The component was not found
I just built up an OVM 2.2 machine and then installed the manager 2.2 template followed by the 10.2.0.5 OMS Grid control template. I've got all the systems up and functional via those templates at this point but the Grid Control server starts up with 2 targets down. When I dig into it it really looks to only be the OCMRepeater under the Application Server and so both the Application Server and the OCMRepeater show as down targets. When I try to start the OCMRepeater from the I am asked for the OS username and password. I supply it with username oracle and the oracle password, which I have verified by logging into the VM. When I hit continue it tells me it is starting the component and then comes back with the following message.
An error occurred while starting "OCMRepeater".
The component was not found in the Oracle Home.
On a fresh install I really think that my Overview pie chart should be a 100% up all green affair. Can anyone give me a hand and help me figure out how to get everything running properly here?
Thanks,
HaroldHi
I tried, but no luck.
./opmnctl status
Processes in Instance: EnterpriseManager0.rhel
-------------------+--------------------+---------+---------
ias-component | process-type | pid | status
-------------------+--------------------+---------+---------
DSA | DSA | N/A | Down
HTTP_Server | HTTP_Server | 2459 | Alive
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | 7308 | Alive
OC4J | home | 2460 | Alive
OC4J | OC4J_EM | 2461 | Alive
OC4J | OC4J_EMPROV | 2463 | Alive
WebCache | WebCache | 2496 | Alive
WebCache | WebCacheAdmin | 2464 | Alive
./oc4j_OCMRepeaterDeploy.sh $ORACLE_HOME
ADMN-300072
Base Exception:
OracleAS instance: Oracle Home: /u00/oms10g OC4J component: OCMRepeater is down
Resolution:
opmnctl: stopping opmn managed processes...
================================================================================
opmn id=rhel:6201
no enabled components for this request
ADMN-300105
Base Exception:
J2EE application: OCMRepeater has already been deployed. Redeploy needs to be used to override previous deployed application
Resolution:
opmnctl: starting opmn managed processes...
================================================================================
opmn id=rhel:6201
no enabled components for this request -
Error occurred while starting application with EP 6.0
Hi all,
when deploy an application, I obtain this error:
===========================================================================
Deployment started Thu May 21 16:50:58 CEST 2009
===========================================================================
Starting Deployment of fgp_ita18_rassegne_iv_wsrsgst
Finished with warnings: development component 'fgp_ita18_rassegne_iv_wsrsgst'/'ferrero.com'/'local'/'20090521121654'/'0':Caught exception during application startup from SAP J2EE Engine's deploy service:java.rmi.RemoteException: Error occurred while starting application ferrero.com/fgp_ita18_rassegne_iv_wsrsgst and wait. Reason: Clusterwide exception: server ID 772336550:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: *Application ferrero.com/fgpita18_rassegne_iv_wsrsgst cannot be started. Reason: it has hard reference to resource FGP_RSGSTMP with type javax.sql.DataSource, which is not active on the server*._ at com.sap.engine.services.deploy.server.ReferenceResolver.processUsageOfComponent(ReferenceResolver.java:533) at com.sap.engine.services.deploy.server.ReferenceResolver.beforeStartingApplication(ReferenceResolver.java:346) at com.sap.engine.services.deploy.server.application.StartTransaction.beginCommon(StartTransaction.java:162) at com.sap.engine.services.deploy.server.application.StartTransaction.beginLocal(StartTransaction.java:141) at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:356) at com.sap.engine.services.deploy.server.application.ParallelAdapter.runMe(ParallelAdapter.java:95) at com.sap.engine.services.deploy.server.application.ParallelAdapter$1.run(ParallelAdapter.java:233) at com.sap.engine.frame.core.thread.Task.run(Task.java:64) at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:83) at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:156)server ID 772336551:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Application ferrero.com/fgp_ita18_rassegne_iv_wsrsgst cannot be started. Reason: it has hard reference to resource FGP_RSGSTMP with type javax.sql.DataSource, which is not active on the server. at com.sap.engine.services.deploy.server.ReferenceResolver.processUsageOfComponent(ReferenceResolver.java:533) at com.sap.engine.services.deploy.server.ReferenceResolver.beforeStartingApplication(ReferenceResolver.java:346) at com.sap.engine.services.deploy.server.application.StartTransaction.beginCommon(StartTransaction.java:162) at com.sap.engine.services.deploy.server.application.StartTransaction.beginLocal(StartTransaction.java:141) at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:356) at com.sap.engine.services.deploy.server.application.ParallelAdapter.runMe(ParallelAdapter.java:95) at com.sap.engine.services.deploy.server.application.ParallelAdapter$1.run(ParallelAdapter.java:233) at com.sap.engine.frame.core.thread.Task.run(Task.java:64) at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:83) at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:156)server ID 712797150:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Application ferrero.com/fgp_ita18_rassegne_iv_wsrsgst cannot be started. Reason: it has hard reference to resource FGP_RSGSTMP with type javax.sql.DataSource, which is not active on the server. at com.sap.engine.services.deploy.server.ReferenceResolver.processUsageOfComponent(ReferenceResolver.java:533) at com.sap.engine.services.deploy.server.ReferenceResolver.beforeStartingApplication(ReferenceResolver.java:346) at com.sap.engine.services.deploy.server.application.StartTransaction.beginCommon(StartTransaction.java:162) at com.sap.engine.services.deploy.server.application.StartTransaction.beginLocal(StartTransaction.java:141) at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:356) at com.sap.engine.services.deploy.server.application.ParallelAdapter.runMe(ParallelAdapter.java:95) at com.sap.engine.services.deploy.server.application.ParallelAdapter$1.run(ParallelAdapter.java:233) at com.sap.engine.frame.core.thread.Task.run(Task.java:64) at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:83) at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:156)server ID 712797151:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Application ferrero.com/fgp_ita18_rassegne_iv_wsrsgst cannot be started. Reason: it has hard reference to resource FGP_RSGSTMP with type javax.sql.DataSource, which is not active on the server. at com.sap.engine.services.deploy.server.ReferenceResolver.processUsageOfComponent(ReferenceResolver.java:533) at com.sap.engine.services.deploy.server.ReferenceResolver.beforeStartingApplication(ReferenceResolver.java:346) at com.sap.engine.services.deploy.server.application.StartTransaction.beginCommon(StartTransaction.java:162) at com.sap.engine.services.deploy.server.application.StartTransaction.begin(StartTransaction.java:136) at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292) at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesImpl(ParallelAdapter.java:342) at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:126) at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:245) at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4712) at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4617) at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4590) at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1163) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:319) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:200) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(AccessController.java:219) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176) (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment of fgp_ita18_rassegne_iv_wsrsgst finished with Warning (Duration 98744 ms)
===========================================================================
Deployment ended Thu May 21 16:52:39 CEST 2009As per as i know this is your custom patch but not delivered by sap.Is the development done fine because it is taking as reference as some resource mentioned in the log and till that is active this deployment will not go fine.
Have you some other deployment that would be activating that resource and then this patch should be done.
Thanks
Rishi Abrol -
Could not start Oracle Agent Service
I have Oracle 8.17 Enterprise Edition installed on Windows 2000
Advanced Server. After the server boots and tries to start
Oracle services, it fails to start the Oracle Agent Service and
gives the following error:
"Could not start the OracleORA817Agent Service on Local
Computer. Error 3221356551:"
Because of this, none of the other Oracle Service start either.
If you have any suggestions, please let me know.
Thanks.
-ianHi,
In w2k advance server, I have two database (db1 and db2), they
have its own listener (list01 and list02). I can sqlplus to two
databases.
After i combined the two listeners to one listener (named
listenerA) in registry, the following error occured when i
sqlplus:
TNS: listener cannot resolve the SERVICE_NAME
In registry, I deleted services for listener01 and 02
in "service in w2k". And add listenerA to service and start it.
I found that db1 abd db2 are not started (no new event showing
database started or altered in alert_log) even w2k show "service
started". When I user database configuation to "reconfigure
database" (just click next and finish), i can sqlplus to the db1
and db2.
So, i think it's not the problem of listenerA, may be the
database is not start or partly start. But I don't know whether
I have delete wrongly in registry or anything wrong. Can anyone
help me ?
I have stopped the oracle agent in w2k service, is it related to
problem ?
Moreover, when i created a new db3 with listenerB, it works
normally even restart the db3 service.
Thanks for your kind attention -
Hi there
Patch Tuesday yesterday (10th June2014). As always we deploy new patches first to a test collection where Windows 7 updates automatically apply.
Upon trying to rebuild any of the machines in this test collection, we were presented with the following error message:
Failed to run task sequence. Error occurred while starting the task sequence (0x8007000E)
After searching about this, I found this page from Niall Brady, which explained the problem:
http://www.niallbrady.com/2013/05/17/after-selecting-a-task-sequence-in-configuration-manager-2012-sp1-you-receive-threadtoresolveandexecutetasksequence-failed-code0x8007000e-in-smsts-log/
So I removed some of the machines from the test Windows update collection, and as per the advice in the above link, the error was gone and those machines could be built successfully.
So the problem is there were too many many policies downloaded (apps, packages and most of all updates) for the task sequence ram to store, hence the error.
Now...
...I have a question.
The next logical step to my mind is to patch our OS image with all missing patches, so these do not have to be downloaded at build time. Niall mentions this as one of the resolutions to this issue.
However there seems to be some confusion over whether this would actually make a difference.
I read through this link:
http://social.technet.microsoft.com/Forums/en-US/7e597b44-2586-4063-b6d0-cec48a7c11c7/sccm-2012-task-sequence-failure-0x8007000e?forum=configmanagerosd
There's seems to be no consensus on this.
Is SCCM 2012 clever enough to - when the task sequence is first started - to download ONLY the updates (policies) it detects as NOT present in the OS image...
or
Will it simply try to download policies for ALL items deployed to it, whether the updates are present in the OS image or not?
I will be disappointed if SCCM 2012 SP1 CU2 isn't clever enough to only download policies at build time for the apps, packages and updates it detects as needed.
I'd be grateful for some clarity on this.
Regards,
John, Glasgow.Hi Jason
Thank you for replying, I appreciate it.
1) We currently have 15 or 16 software update groups for Office updates, dating back a month or two. The latest software update group contains all the patches in the previous software update groups plus the patches released on 10th June. Do you recommend
deleting all but the latest software update group?
2) I'm almost reluctant to ask this, but based on what you have advised, is it the case that when the task sequence executes, it will download policies for each update in each software update group regardless of whether it has already downloaded a policy
for an update in a previous software update group? So in effect it's downloading policies (for updates) it has already downloaded?
3) I'm not clear on why there would be no policy for an image; in Niall Brady's informative page on the 8007000E error, he writes the following:
"The reason it has run of space could be due to four possibilites: too many applications, too many Windows updates, too many Task Sequence steps, too many referenced packages'.
Can you shed some light on why there isn't a policy for an image?
Thanks again for replying,
John. -
Error message while starting Console
Dear All,
I am getting given below error message while starting Console.
Start Failed :2
Invalid Credentials.
tell me the solutionHi Pavan,
Check if you're connected with <SID>adm on OS as said Pinkle and if that user belongs to administrators group.
If yes you can check if the SAP<SID><Instance_number> and SAPOSCOL are started (and in automaticaly start mode).
Regards, -
Failed to run Task Sequence.
An error occurred while starting the task sequence (0x8007000E)."
While OSD, picks up task sequence but fails in resolving task sequence dependencies. SMSPXE identifies device is not in database (unknown).
SMSTS.log shows
ThreadToResolveAndExecuteTaskSequence failed. Code(0x8007000E)" in SMSTS.LOG, have seen other articles suggesting failure due to lack of storage (RAM) but this task sequence has worked in past.
By the way, if I create a stand alone media, we are able to image the workstation. What has changed in the task sequence such that the workstation is unable to download policies due to lack of storage (RAM) on workstation. Workstation has 2 GB of RAM.I have found a work around for the issue, even though the computer is unknown, there were software updates targeted to the ALL SYSTEMS collection which applies to All Unknown Computers and therefore to x64 Unknown Computer and x86 Unknown Computer.
We had a SCEP ADR applying definition updates to All Systems, we applied the ADR to a different collection, removed all the SCEP updates to All Systems and successfully re-imaged the workstation. Following article was of great help in identifying the problem
after-selecting-a-task-sequence-in-configuration-manager-2012-sp1-you-receive-threadtoresolveandexecutetasksequence-failed-code0x8007000e-in-smsts-log
Thanks Gerry for your assistance. -
An error occurred while starting "Web Cache".
We have corrected the issue. There was something wrong with the files in the WebCache Folder.
Hello,
When starting Web Cache we get the following message:
An error occurred while starting "Web Cache".
WebCache : WebCache - failed to start a managed process after the maximum retry limit
WebCache : WebCacheAdmin - failed to start a managed process after the maximum retry limit
For more information, look at the logs using the related link below.
Related Link Error Logs
When we open the event_log in the \webcache\logs folder, there is nothing there. The process is not writing any type of message to the event_log.
We have tried changing port numbers without any success.
This process was working until a restart of the server yesterday. Now Web Cache and Portal are not showing active.
Thank you for any input on this matter.
Message was edited by:
user593854Try to stop processes that might still occupy the port of the webcache and webcache admin.
Also check the logfiles in the opmn.
cu
Andreas
Maybe you are looking for
-
I am in the process of designing a website-on-a-CD. In order to make things easier for my clients, I decided to organize this site into local sub-directories with an index.html page in each one. However, when I try to enter the local sub-directory na
-
No internet access since updating to ios 8
Since updating my ipad air to ios 8.02, I can not use internet. I get mail but sometimes the message is blank because of lack of internet. I have also been able to use facetime. I can not check for software update in settings. I used itunes on my
-
Hi all, i'm having a problem when creating JCO connections for WebDynpro. When I create an "Application data" connection with "Single Server Connection" the connection is created sucessfully and I have successfull test and ping. If I create an "Appli
-
Hi, This is my first post. I have just brought a Lenovo Flex 10 with a celeron n 2807 chip. I asked in the shop if they could do an ssd upgrade and they said they wouldn't recommend it because the celeron n2807 chip is not good enough to run an SSD i
-
Passing parameters without modifying the URI
Hi All, I am working on a web application which is intended to run on the BlackBerry. I have one Servlet which I use to redirect the application for the appropriate action, for the purpose of keeping the URI the same. I do this because the users do n