Error 1069 - Server Service won't start

I'm getting the following erro message when I try to start Central Pro Server:
Could not start the Adobe Central Output Server Service on local computer.
Error 1069 The Service did not start due to logon failure.
I checked the services and it won't allow me to start this manually... any suggestions would be greatly appreciated!

From the text error as well as the inability to manually start the server I'd suspect that the user-id or password defined on the Log On tab is incorrect. If you are on a Windows network don't forget that if you are using a Domain user-id that the domain name has to be included (DOMAIN\user-id).

Similar Messages

An error 1069 - )The service did not start due to logon failure) occurred while performing this service operation ...

Hi All,
We seem to be being plagued by the error below by our SQL Server agent. This happens almost everytime we restart the server that has been running for a day or two.
Our SQL Server Agent uses a none expiring domain credential. I understand that this problem only happens when the profile being used by the SQL Servr Agent has changed (password change). What puzzles me is that the login is A ok and no changes has been made to it's password.
We always resolve this problem by changing the login used in the SQL Server Agent to local and after that, returning it back to it's original domain login. Unfortunately, we cant always do this everytime something goes wrong.
Can anyone please help us shed a light on this? We're using SQL2k with SP3a. Thanks!
Error:
An error 1069 - )The service did not start due to logon failure) occurred while performing this service operation on the SQLServerAgent service.
Regards,
Joseph

Ran into this error, and the password was correct. What the System Event Log said:
Code SnippetEvent Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7041
Date: 10/8/2008
Time: 9:33:09 AM
User: N/A
Computer: ComputerName
Description:
The SQLSERVERAGENT service was unable to log on as DomainName\SQLAgent with the currently configured password due to the following error:
Logon failure: the user has not been granted the requested logon type at this computer.
Service: SQLSERVERAGENT
Domain and account: DomainName\SQLAgent
This service account does not have the necessary user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed, a Group Policy object associated with this node might be removing the right. Check with your domain administrator to find out if this is happening.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp
...sure enough it had been removed from the "Logon as a service" list. Hope this helps.

'error 1069 - (The service did not start due to a logon failure) in BAM

I installed BAM on XP SP2, i do have IIS configured and XE DB, after installing when i tried starting the services as per post-installion guide.i did found the error 'An error 1069 - (The service did not start due to a logon failure).In google i could find a remedy saying
Remedy: Go to Start /Programs / Administrative tools / Services. Right-click the Goodlink Server and select Properties. Click the Log On tab. Retype the correct password. Start the Goodlink service.
i did so but did found the same error.So i tried changing a few things in LogOn tab such as " Earlier it was logging in from machine name and pwd , since it gave an error" i changed it to local system account ." now all services of BAM have started except Oracle BAM Active Data cache.
Anyone pls rep how do i resolve this? Do i need to re-install? i need this to be done very urgently.

Windows XP is not a certified platform for BAM. However, the product works fine on XP for evaluations and demos. For production, use a certified/supported version of Windows as is documented in the Software System Requirements section of the BAM Install Guide.
All Postinstall steps apply to all versions of Windows that BAM runs on except for the Postinstall step called "Required Configuration for Microsoft Windows Server 2003". As indicated by the step name, this one is for W2003 only.
"network not found windows 53 error" is generally a network, account or password issue. Please follow the Install Guide step by step to avoid installation issues like this.
See "Troubleshooting Start Page Issues" for start page problems.
As indicated in the Install Guide, you can use host names or IP addresses:
"12. On the Configure location of Oracle BAM step, enter the host name or the IP
address where each component is to be installed, even if it is not being installed at
this time, then click Next."
Regards, Stephen

WDS Server Service won't start - 'An error occurred trying to start the Windows Deployment Services Server.'

I'm having issues installing starting the WDS server service on Win 2008 R2, this is happening on multiple (all 2008 R2) systems on this domain so I'm beginning to think it's either AD or network related, in event viewer I get the following error.
'An error occurred trying to start the Windows Deployment Services Server.'
Error Information: 0x0906
EventID : 257
single domain, single forest, 2008 R2 functional level, both system are virtual plugged into same vswitch on a flat network.
any ideas what might be the issue? I've never had an issue getting this working on many occasions before today and I've come to many a dead end looking at other articles thus far...
With WDS tracing enabled I get the following error information:
[4304] 09:22:11: ===>Starting logging of module [WDSServer]
[4304] 09:22:11: [UDPPorts] Policy: 1, Dynamic Port Range: 64001-65000.
[4304] 09:22:11: [RPC] Using Tcp Port 5040 for Rpc Calls.
[4304] 09:22:11: [RPC] Client Impersonation Logging=Disabled
[4304] 09:22:11: [RPC] Host Name: sccm.domain.local
[4304] 09:22:11: [RPC] NTLM/Kerberos Spn: ldap/sccm.domain.local
[4304] 09:22:11: [RPC] Initialized
[3756] 09:22:11: [RPC] Server Started.
[4304] 09:22:11: [BINLSVC][RPC][Ep={5F4FB9F0-C0E3-41C1-AA00-9A7C690AC3A3}] Registered
[4304] 09:22:11: [BINLSVC] Provider Initialized.
[4304] 09:22:11: [WDSDDPS][RPC][Ep={FA0A27E1-C2BA-4B3B-94B2-025E82FFAA6D}] Registered
[4304] 09:22:11: [WDSDDPS][RPC][Ep={011D24AC-CB3A-4739-A339-5D2E1B5306CE}] Registered
[4304] 09:22:11: [51][WDSDDPS] [d:\w7rtm\base\ntsetup\opktools\wds\ddp\server\ddpprovider.cpp:196] Expression: , Win32 Error=0x906
[4304] 09:22:11: [WDSDDPS][RPC][Ep={FA0A27E1-C2BA-4B3B-94B2-025E82FFAA6D}] Closed
[4304] 09:22:11: [WDSDDPS][RPC][Ep={011D24AC-CB3A-4739-A339-5D2E1B5306CE}] Closed
[4304] 09:22:11: [d:\w7rtm\base\ntsetup\opktools\wds\wdssrv\server\src\wdsprovider.cpp:144] Expression: , Win32 Error=0x906
[4304] 09:22:11: [WDSDDPS] Initialization Failed (rc=2310)
[4304] 09:22:11: [d:\w7rtm\base\ntsetup\opktools\wds\wdssrv\server\src\wdsprovhdl.cpp:172] Expression: , Win32 Error=0x906
[4304] 09:22:11: [WDSDDPS] Deleted.
[4304] 09:22:11: [d:\w7rtm\base\ntsetup\opktools\wds\wdssrv\server\src\wdsservice.cpp:178] Expression: , Win32 Error=0x906
[4304] 09:22:11: [Udp] Listen Shutdown.
[3756] 09:22:11: [RPC] Server terminated (rc=0)
[4304] 09:22:11: [RPC] Listen Stopped.
[4304] 09:22:11: [BINLSVC] Shutting down
[4304] 09:22:11: [BINLSVC][RPC][Ep={5F4FB9F0-C0E3-41C1-AA00-9A7C690AC3A3}] Closed
[4304] 09:22:11: [BINLSVC] Deleted.

It seems I've found out the solution myself, the issue seems to be caused when DHCP and WDS are on the same server, The installation must identify this during the first installation of WDS but not on subsequent installations, the method to
get it working again is:
1.
Install WDS Role (using defaults)
2.
Make the following registry change:
HKLM\SYSTEM\CurrentControlSet\services\WDSServer\Providers\WDSPXE\UseDhcpPorts = 0
3.
Run the following command line to initialize Windows Deployment Services:
wdsutil /initialize-server /reminst:D:\RemoteInstall
4.
Run the following command to enable the DHCP port registry setting
wdsutil /Set-Server /UseDHCPPorts:No /DHCPOption60:Yes

SQL Server Service won't start on SQL Server 2008

Hi everyone,
I'm having trouble starting SQL Server service after stopping and starting the service. Before this happened, I created a Stored Procedure for marking all tables at once along with a maintenance plan for differential backup on all my databases based on the
recommendation from this link, http://msdn.microsoft.com/en-us/library/ms253070.aspx.
When I realized that the differential backup failed with some databases displaying (Restoring...) post-fix to the database name, I decided to stop SQL Server service and start it up. That is when I won't be able to start the service again.
Is there a fix for starting the SQL Server service? Any help is very much appreciated.
Additional information:
- With administrator permission granted.
- Service Pack 1 for SQL Server 2008 installed.
- Using default database instance.
- Tried C:\Program Files\Microsoft SQL Server\MSSQL.....\Binn>net start MSSQLSERVER /T3608 ( return msg: System error 5 has occurred. Access is denied.
- When I start SQL Server service, I keep getting this dialog msg:
"Windowns could not start the SQL Server (MSSQLSERVER) on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 1814."
The event log does not explain or provide any hint on how to fix the problem.
- Log msg:
2010-07-22 10:30:25.09 Server      (c) 2005 Microsoft Corporation.
2010-07-22 10:30:25.09 Server      All rights reserved.
2010-07-22 10:30:25.09 Server      Server process ID is 6076.
2010-07-22 10:30:25.10 Server      Authentication mode is MIXED.
2010-07-22 10:30:25.10 Server      Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
2010-07-22 10:30:25.11 Server      This instance of SQL Server last reported using a process ID of 5708 at 7/21/2010 3:27:01 PM (local) 7/21/2010 10:27:01 PM (UTC). This is an informational message only; no user action is required.
2010-07-22 10:30:25.11 Server      Registry startup parameters:
    -d C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\master.mdf
    -e C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Log\ERRORLOG
    -l C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
2010-07-22 10:30:25.14 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2010-07-22 10:30:25.14 Server      Detected 4 CPUs. This is an informational message; no user action is required.
2010-07-22 10:30:25.23 Server      Using locked pages for buffer pool.
2010-07-22 10:30:25.43 Server      Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2010-07-22 10:30:25.73 Server      Node configuration: node 0: CPU mask: 0x000000000000000f Active CPU mask: 0x000000000000000f. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2010-07-22 10:30:25.81 spid7s      Starting up database 'master'.
2010-07-22 10:30:26.14 spid7s      CHECKDB for database 'master' finished without errors on 2010-07-19 21:15:02.823 (local time). This is an informational message only; no user action is required.
2010-07-22 10:30:26.18 spid7s      Resource governor reconfiguration succeeded.
2010-07-22 10:30:26.18 spid7s      SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2010-07-22 10:30:26.18 spid7s      SQL Server Audit has started the audits. This is an informational message. No user action is required.
2010-07-22 10:30:26.19 spid7s      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
2010-07-22 10:30:26.28 spid7s      SQL Trace ID 1 was started by login "sa".
2010-07-22 10:30:26.29 spid7s      Starting up database 'mssqlsystemresource'.
2010-07-22 10:30:26.31 spid7s      The resource database build version is 10.00.2531. This is an informational message only. No user action is required.
2010-07-22 10:30:26.43 spid10s     Starting up database 'model'.
2010-07-22 10:30:26.43 spid7s      Server name is 'XXXXXXXXXXXXXX'. This is an informational message only. No user action is required.
2010-07-22 10:30:26.47 spid10s     The database 'model' is marked RESTORING and is in a state that does not allow recovery to be run.
2010-07-22 10:30:26.47 spid10s     Error: 927, Severity: 14, State: 2.
2010-07-22 10:30:26.47 spid10s     Database 'model' cannot be opened. It is in the middle of a restore.
2010-07-22 10:30:26.59 spid10s     Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in
the event log that may indicate why the tempdb files could not be initialized.
2010-07-22 10:30:26.59 spid10s     SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.

Hello,
Could you please copy the model.mdf and modellog.ldf from
C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Binn\Templates
To
C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA
Rebuilding the system databases you will lose lose logins, jobs, SSIS packages. You may have to restore or attach user databases.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Crystal Ent 10 install fails with Error 1920 and services won't start

apologies if i'm posting to the wrong group. just let me know what the appropriate group is and i'll be happy to post there. i'm new to Crystal and this is my first installation of Ent so i'm completely lost, but here's my problem.
i'm trying to install Crystal Reports 10 and Enterprise 10 on a Windows Server 2003 SP1 server logged in as Local Admin and running the install locally (as opposed from a network location). i have IIS installed and .Net Framework 2.0 installed as per my software vendor's requirements.
the Reports 10 install goes fine, but when i near the end of the Enterprise 10 install, each of the services fails to start. the message for each is a pop-up that states Error 1920. Service 'Crystal Cache Server' (CasheServer) fiailed to start. Verify that you have sufficient privileges to start the system services. i clicked Retry on the 1st one (Crystal Cache Server) but it still fails to start. so i clicked Ignore on all of them so i can get past each one and check the Services window to see what account they are running under - it's Local System account as i'd expect. At the end of the install, i'm asked if i want to logon to the CMS and i chose No since i'm not familiar with Crystal at all but figured it's not going to work since the services wouldn't start.
i can't start them from the Services window or from the Crystal Configuration Manager - i get a message stating it failed to start in a timely fashion.
my co-worker and i noticed that after the install, and the MSDE install that CE does, there are the CE10.mdf and CE10.ldf files but it doesn't create 4 tables that expect to see when comparing this to our Test environment that our consultants set up. we think this is at the heart of it, but we simply don't know. can anyone help?

The appropriate group for this type of question is the Business Objects Enterprise Administration forums; I will move your post there today, in the future you can post to that forum.

Nuance Sppech server service won't start

Hi All,
i installed Nuance ASR/TTS and tried to start the Speech Service and its not starting. please see the error below:
if anyone has face the same issue, please suggest.
regards
Munish

Hi Munish,
By the way did you check if you have a valid License running in Nuance server, please check the expiry date also as its a time bound license.
Thanks,
Anand
Please rate helpful posts !!

Microsoft Forefront Server Protection Eventing Service won't start?

Hi Guys,
When Forefront Protection for Exchange was integrated/enabled on our SBS 2008 server, Microsoft Forefront Server Protection Eventing Service won’t start. Even when we try to start it manually we are getting this message (see attached). During this attempt,
we got these events in the event viewer. In this case, in order to have our email working, we have to temporarily disable Forefront. Any suggestion how to fix this? Please advise.
Event 465
Source: ESENT
FSCEventing (9324) Corruption was detected during soft recovery in logfile C:\Program Files (x86)\Microsoft Forefront Protection for Exchange Server\Data\Incidents\inc.log. The failing checksum record is located at position END. Data not matching the log-file
fill pattern first appeared in sector 450 (0x000001C2). This logfile has been damaged and is unusable.
Event 301
Source: ESENT
FSCEventing (9324) The database engine has begun replaying logfile C:\Program Files (x86)\Microsoft Forefront Protection for Exchange Server\Data\Incidents\inc.log.
Event 454
Source: ESENT
FSCEventing (9324) Database recovery/restore failed with unexpected error - 501.
Event 1076
Source: FSCEventing
The Forefront Protection Eventing Service has stopped.
Thank you very much!
Arnel

Hi Arnel,
Based on error messages, it indicates a log file (inc.log) has become corrupted. Please restore the log file
from a backup copy, and then check if this issue can be solved. For more details, please refer to the following article.
Event Id 465
Hope this helps.
Best regards,
Justin Gu

Web services won't start - error 100002

Hi there
I have done a freash install of Leopard Server 10.5.4 and updated to 10.5.8 on an Xserve G5. Added a 2nd web site (in addition to default) and now web services won't start returning the error:
A service has encounted an error.
Try to refresh the view (mysever.com/Web)
(Could not start web service - details in error log.)
100002
Below is in the error log for both web sites:
Syntax error on line 1310 of /private/etc/httpd/httpd.conf:
Invalid command '<Proxy', perhaps mis-spelled or defined by a module not included in the server configuration
The following is a Console Message:
10/4/09 10:50:18 PM com.apple.launchd[1] (org.apache.httpd-1.3[4682]) Exited with exit code: 1
10/4/09 10:50:18 PM com.apple.launchd[1] (org.apache.httpd-1.3) Throttling respawn: Will start in 10 seconds
Any pointer of how to solve this would be appreciated.
Cheers, Paul

Thanks for the reply. line 1310 is <Proxy disabled_proxy>
#NoCache a_domain.com another_domain.edu joes.garage_sale.com
<Directory "disabled_proxy">
Allow from example.com
Order Deny,Allow
Deny from all
</Directory>
<Proxy disabled_proxy>
Allow from example.com
Order Deny,Allow
Deny from all
</Proxy>
</IfModule>

Windows 2008 R2 - Error 2 Server Service wont start

He
We tried to start the Server Service on windows 2008 R2 but it wont start error: 2. While we check the service dependency we are unable to see the "SMB 1 xxx Driver" instead it is having name SRV.
so how to restore the service back to the original state please let us know.

Hi SPV4645,
The following similar thread solution may work for your case.
Server service (lanmanserver) will not start
https://social.technet.microsoft.com/Forums/windowsserver/en-US/3316a5e0-fc2f-4300-917d-66e1527b4aa7/server-service-lanmanserver-will-not-start
Please also confirm the File and Printer Sharing for Microsoft Network driver has selected.
The related KB:
You receive a "The server service is not started" error message when you try to add a user to a group in Windows XP
http://support.microsoft.com/en-us/kb/885859
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Password service won't start

Following an unplanned hard restart of our server (Mac OS X 10.9.5, Server 3.2.2), the password service won't start, so our staff can't log into mail, calendars or file sharing.
When I launch Open Directory, the main window has the message "Unable to load replica list", then it switches itself off after a minute or so.
I've looked at the certificates in Server and they have the green tick so presumably are OK.
DNS is working OK and running the command "sudo changeip -checkhostname" reports success.
Here's the section of log that repeats every few seconds as PasswordService repeatedly starts up and exits:
13/03/2015 20:55:00.617 com.apple.launchd[1]: (com.apple.PasswordService[5890]) Exited with code: 1
13/03/2015 20:55:00.617 com.apple.launchd[1]: (com.apple.PasswordService) Throttling respawn: Will start in 10 seconds
13/03/2015 20:55:02.540 xscertd[249]: Failed sending LookupCRLByCARecordName command to com.apple.xscertd.helper: The operation couldn’t be completed. (com.apple.certificateserver error 42005.)
13/03/2015 20:55:08.708 com.apple.launchd[1]: (org.openldap.slapd[5894]) Exited with code: 1
13/03/2015 20:55:08.708 com.apple.launchd[1]: (org.openldap.slapd) Throttling respawn: Will start in 7 seconds
13/03/2015 20:55:10.206 xscertd-helper[5897]: ldap_search_ext_s returned -1 - Can't contact LDAP server when searching for bdb suffix, exiting
13/03/2015 20:55:10.207 com.apple.launchd[1]: (com.apple.xscertd-helper[5897]) Exited with code: 1
13/03/2015 20:55:10.207 com.apple.launchd[1]: (com.apple.xscertd-helper) Throttling respawn: Will start in 10 seconds
13/03/2015 20:55:10.639 PasswordService[5901]: -[PasswordServerPrefsObject getSearchBase]: Unable to locate search base: -1 Can't contact LDAP server
13/03/2015 20:55:10.639 PasswordService[5901]: -[PasswordServerPrefsObject loadXMLData]: Unable to locate passwordserver config record's plist attribute: -1 Can't contact LDAP server
13/03/2015 20:55:10.640 PasswordService[5901]: -[PasswordServerPrefsObject getSearchBase]: Unable to locate search base: -1 Can't contact LDAP server
13/03/2015 20:55:10.640 PasswordService[5901]: -[PasswordServerPrefsObject saveXMLData]: ldap_modify_ext_s of the passwordserver config record's plist attribute: -1 Can't contact LDAP server
13/03/2015 20:55:10.684 PasswordService[5901]: int pwsf_GetPublicKey(char *): ldap_search_ext_s cn=authdata for Public Key returned -1
13/03/2015 20:55:10.687 com.apple.launchd[1]: (com.apple.PasswordService[5901]) Exited with code: 1
I have backups (both Time Machine and clones of the hard drive) that I could use to restore the corrupted bit of the configuration, if necessary, but I don't know what to restore.

Many Open Directory problems can be resolved by taking the following steps. Test after each one, and back up all data before making any changes.
1. The OD master must have a static IP address on the local network, not a dynamic address. It must not be connected to the same network with more than one interface; e.g., Ethernet and Wi-Fi.
2. You must have a working DNS service, and the server's hostname must match its fully-qualified domain name. To confirm, select the server by name in the sidebar of the Server application window, then select the Overview tab. Click the Edit button on the Host Name line. On the Accessing your Server sheet, Domain Name should be selected. Change the Host Name, if necessary. The server must have at least a three-level name (e.g. "server.yourdomain.com"), and the name must not be in the ".local" top-level domain, which is reserved for Bonjour.
3. The primary DNS server used by the server must be itself, unless you're using another server for internal DNS. The only DNS server set on the clients should be the internal one, which they should get from DHCP if applicable.
4. If you have accounts with network home directories, make sure the URL's are correct in the user settings. A return status of 45 from the authorizationhost daemon in the log may mean that the URL for mounting the home directory was not updated after a change in the hostname.
5. Only if you're still running Mavericks server, follow these instructions to rebuild the Kerberos configuration on the server.
6. If you use authenticated binding, check the validity of the master's certificate. The common name must match the hostname and domain name. Deselecting and then reselecting the certificate in Server.app has been reported to have an effect in some cases. Otherwise delete all certificates and create new ones.
7. Unbind and then rebind the clients in the Users & Groups preference pane. Use the fully-qualified domain name of the master.
8. Reboot the master and the clients.
9. Don't log in to the server with a network user's account.
10. Disable any internal firewalls in use, including third-party "security" software.
11. If you've created any replica servers, delete them.
12. If OD has only recently stopped working when it was working before, you may be able to restore it from the automatic backup in /var/db/backups, or from a Time Machine snapshot of that backup.
13. As a last resort, export all OD users. In the Open Directory pane of Server, delete the OD server. Then recreate it and import the users. Ensure that the UID's are in the 1001+ range.
If you get this far without solving the problem, then you'll need to examine the logs in the Open Directory section of the log list in the Server app, and also the system log on the clients.

CF8 Application Server Service Will NOT Start

I ran into this error:
java.lang.OutOfMemoryError: Java heap space
and after researching it it seemed that I should up the max heap size on the Java/JVM page, so I increased my max heap size to 1044MB from 512, via the CF Administrator, I also added maxPermSize= 256m. Then I restarted the server, but the Application Server service will not start.
I opened home/runtim/bin/jvm.config and set the heap size to 1024, restart, service still wont start.
Set the max heap size to 512 and removed maxPermSize, restarted server, service still won't start.
Set the entire java.args equal to: -server -Xmx256m -Dsun.io.useCanonCaches=false -xx:MaxPermsize=128m -XX:+UseParallelGC -Dcoldfusion.rootDir={application.home}/../ -Dcoldfusion.libPath={application.home}/../lib -Dcoldfusion.classPath={application.home}/../lib/updates,{application.home}/../lib,{appli cation.home}/../gateway/lib/,{application.home}/../wwwroot/WEB-INF/flex/jars,{application. home}/../wwwroot/WEB-INF/cfform/jars
Restarted, still the services will not start.
Does anyone have any ideas?
The error I get when trying to start the services is:
Windows could not start the ColdFusion 8 Application Server on Local Computer. For more information, review the System Even Log. If this is a non-Microsoft service, contact the service vendor, and refore to service-specific error code 2.
Thanks!

Once you have ColdFusion running again this will bring you back to your initial problem:
java.lang.OutOfMemoryError: Java heap space
Suggest take a copy of your working JVM.CONFIG (so you have a backup) then add some debugging to the JVM Arguments eg:
# Arguments to VM
java.args=-server -Xmx512m -Dsun.io.useCanonCaches=false -XX:MaxPermSize=192m -XX:+UseParallelGC -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -XX:+PrintHeapAtGC -verbose:gc -Xloggc:cfjvmGC.log -Dcoldfusion.rootDir={application.home}/../ -Dcoldfusion.libPath={application.home}/../lib -Dcoldfusion.classPath={application.home}/../lib/updates,{application.home}/../lib,{appli cation.home}/../gateway/lib/,{application.home}/../wwwroot/WEB-INF/flex/jars,{application. home}/../wwwroot/WEB-INF/cfform/jars
Once ColdFusion is restarted again a log file will be created called \ColdFusion8\runtime\bin\cfjvmgc.log. Open the log file and you will be able to see how the New, Tenure and Permanent memory spaces are working. Given you now know which buffer is filling (excluding New made up of Eden and a couple Survivor spaces - because those fill and empty all the time) you can make adjustments to JVM.CONFIG knowing which value you intend to alter. Likely you want to alter either Xmx or MaxPermSize. When you think the Java heap space is resolved turn logging off by removing the bolded details.
HTH, Carl.

SP1 for Exchange 2013 install fails with ECP virtual directory issues and now transport service won't start and mail is unavailable

SP1 for Exchange 2013 install failed on me with ECP virtual directory issues:
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ecp (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The virtual directory 'ecp' already exists under 'server/name'.
Parameter name: VirtualDirectoryName".
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
!! And now transport service won't start and mail is unavailable !!
Any help would be appreciated.
I have removed the ecp site from default site and attempting to rerun SP1 now. I do not have high hopes. :(

Hi,
Thanks for your response.
From the error description, you need to manually remove the ECP with IIS manager in both the Default Web Site and the Exchange Back End firstly. And then continue the upgrade to check the result.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

ODBC server & agent won't start - J2EE install

Hi all,
I have installed the developer edition of CFMX7. I have
tomcat running on my windows2000 server, so I downloaded the
windows installer and chose the J2EE-war option. It runs just fine.
I also installed the ODBC server, because I want to connect
to MS Access databases with my developer edition. For that, I tried
this:
http://www.bpurcell.org/blog/index.cfm?mode=entry&entry=860.
First problem was that after tomcat automatically deployed the war
file, the folder 'SequeLink Setup' did not exist in the web-inf\db
folder. So I renamed the war to zip, and checked - the file
is present in the war. So I manually extracted the zip to a
new directory. I ran the cfm script with the reference to this new
directory, and the ODBC services were installed - hurray!
But now the services do not want to start. I first got the
error that the file was not found. It referenced to a slserver52
folder, which had only two directories called 'logging' and
'tracing', but no bin files whatsoever. There is however a
slserver54 folder, which contains all kind of stuff. So I started
regedit and changed all the references to 52 in 54, and rebooted
the server. Still no luck: now I get a 1067 error on the server and
an unknown error on the agent.
Any ideas??

That is just what I did, but that didn't help. The installer
creates services that point to the slserver52 folder, but that
should be slserver54. When I change the directory in the registry,
the services won't start. The ODBC Agent sais:
"Could not start the ColdFusion MX ODBC Agent service on
Local Computer. The service did not return an error. This could be
an internal Windows error or an internal service error. If the
problem persists, please contact your system administrator."
The ODBC Service returns the exact same error.

EPMA server service is not starting

Hi All,
I'm unable to open dimension library,calc manager because EPMA server service is not starting.When trying to start the service EPMA Administration Server Service I'm getting the following error-"The Hyperion EPMA Server service on Local Computer started and then stopped.Some services stop automatically if they are not in use by other services or programs"
And while opening the Dimension library in EPMA I'm getting the following error-"No connection could be made because the target machine actively refused it 127.0.0.1:5251
Code:
com.hyperion.awb.web.common.DimensionServiceException
Description:An error occured processing the results from the server.
Actor:none
Kindly ley me know what could be the issue and how I can resolve it.
Thanks

Hi,
When you try to start the service, you will get this error.
So, please look into the Windows Event viewer for the Error meassage.
You can look into the DimensionServer.log and DimensionServer-err.log file for the error msg which vivek suggested you.
path for error logs: C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\epma
Regards,
mady

Error 1069 - Server Service won't start

Similar Messages

Maybe you are looking for