Error -1074396074 During SSIM Test on PXIe-1491
I have been running a validation test of our new video test hardware. I'm trying to run a continous SSIM test with my PXIe-1491 but I keep seeing an error after a few cycles that says something about IMAQ Fast SSIM. The NI website site seems to say this is an NI VISION error, which makes sense, and it also says, "Incompatible image size." Although it is weird that this worked for about 13 cycles then gave up at the end. Below is the front panel and my block diagram of the VI that I'm running. I would appreciate any help on this.
Hey Daniel, I just stumbled across this post. I'm sure you've figured it out now, but for anyone searching in the future, this error comes up when the resolution of our incoming stream is different than our reference stream. The solution is to make the 2 match by changing the resolution of one of those streams.
Paul Davidson
Sound and Vibration Software Staff Product Support Engineer
National Instruments
Similar Messages
-
Errors encountered during perfromance testing
While doing some stress testing on our WLS server we kept seeing the
following errors:
1) NullPointerException on NTSocketMuxer, error log follows:
Tue Feb 22 05:08:28 EST 2000:<E> <NTSockMux> failure in processSockets()
loop: GetData: fd=16764 numBytes=23
Tue Feb 22 05:08:28 EST 2000:<E> <NTSockMux>
java.lang.NullPointerException: null native pointer - socket was closed
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java,
Compiled Code)
at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:19)
at weblogic.t3.srvr.ExecuteThread.run(ExecuteThread.java, Compiled
Code)
This error doesn't seem to have any immediate impact, although it can't
be a good thing and it seems to happen even at times when we are not
doing stress testing. Also, it is very frequent that we see the above
messages. We are running WLS 4.51 w/ Service Pack 5. I am wondering if
this is a problem w/ Service Pack 5 since I don't see this on another
machine running WLS 4.51 with Service Pack 4. Both are using JDK 1.2.2.
2) Connection Rejected, error log follows:
Tue Feb 22 07:08:16 EST 2000:<W> <ListenThread> Connection rejected:
Login timed out after 15000 msec. The socket came from
[host=207.17.47.141,port=11929,localport=443] See property
weblogic.login.readTimeoutMillis.
I know how to adjust this for this one. My questions on this are:
If I set my readTimeoutMillisSSL (SSL in this case) from 15000 to 30000
what does this exactly mean. Does this mean that instead of allowing a
max 15 seconds for a connection to be established, now I am allowing 30
seconds? Also, is this only for the initial connection establishment (ie
user login), or does this parameter effect other aspects of the
connection later on? What negative side effects would I encounter if I
set this to 60000 (1 minute)?
Finally, what can I do so that a connection does not take over 15
seconds to establish? Note this is not the norm, just happens more often
during stress testing.
3) Creating & Closing connection & DGCserver, log follows:
Tue Feb 22 07:08:44 EST 2000:<I> <RJVM> Closing connection to
138.8.81.19/138.8.81.19 5634583086356155101
Tue Feb 22 07:08:45 EST 2000:<I> <RJVM> Creating connection to
138.8.81.19/138.8.81.19 5634583086356155101
Tue Feb 22 07:08:45 EST 2000:<I> <RJVM> Closing connection to
138.8.81.19/138.8.81.19 5634583086356155101
Tue Feb 22 07:08:50 EST 2000:<I> <RJVM> Creating connection to
144.14.157.204/144.14.157.204 2864292845294268830
Tue Feb 22 07:08:50 EST 2000:<I> <RJVM> Creating connection to
138.8.81.19/138.8.81.19 5634583086356155101
Tue Feb 22 07:08:50 EST 2000:<I> <RJVM> Closing connection to
138.8.81.19/138.8.81.19 5634583086356155101
Tue Feb 22 07:08:50 EST 2000:<I> <RJVM> Creating connection to
138.8.81.19/138.8.81.19 5634583086356155101
Tue Feb 22 07:08:50 EST 2000:<I> <RJVM> Closing connection to
138.8.81.19/138.8.81.19 5634583086356155101
Tue Feb 22 07:08:51 EST 2000:<I> <DGCserver> tried to renew lease for
lost ref: 902
Tue Feb 22 07:08:52 EST 2000:<I> <RJVM> Heartbeat/PublicKey resend
detected
Tue Feb 22 07:08:54 EST 2000:<I> <DGCserver> tried to renew lease for
lost ref: 904
Tue Feb 22 07:08:58 EST 2000:<I> <RJVM> Creating connection to
138.8.81.19/138.8.81.19 5634583086356155101
Why the constant trying to create connection, close connection?
What is DGCserver?
4) Ignoring message from a previous JVM, log follows:
Tue Feb 22 08:29:50 EST 2000:<E> <RJVM> Ignoring message from a previous
generation: JVMMessage from 8729925219143181234C138.8.222.21 to
-3465797227003769874C192.168.100.61 with CMD_ONE_WAY, prtNum=6, ack=103,
seqNum=1384
Tue Feb 22 08:30:15 EST 2000:<I> <HTTPTunneling> Sending DEAD response
What does this mean?
5) PeerGoneExceptions
What causes these?
Our environment is set up as follows:
WLS Server
WLS 4.51 w/ Service Pack 5
NativeIO = true
ExecuteThreadCount = 40
readTimeoutMillis=5000
readTimeoutMillisSSL=10000
Dell Pentium III 600 w/ 512 MB memory
NT 4.0
JavaSoft 1.2.2
-ms128 -mx350
WLS Client
Java Application
t3s and https (using WLS RMI)
JavaSoft 1.1.7b
typically Pentium 200 MHz or better w/ 64MB or more
Basically our clients connect to our WLS server using RMI. Each client
also has a callback object where the server sends event notification
back to the clients. Most of the communication is back through these
client callback objects. Its similar to a stock trading application in
that 1 client incoming requests will generate 200 outgoing events (if
for example there are 200 users on the system). The above observations
where made while 25 very active users where on the system.
Thanks very much for any and all help,
Edwin Marcial
Continental Power ExchangeHi Kim,
Thanks for the response, but which problem in particular did you solve, I've
listed a couple here.
Edwin
kim hyun chan wrote:
hi,
I met the problem like you before.
so I reduce executeThreadCount from 50 to 20 , and then I solved my proplem.
"Edwin Marcial" <[email protected]> wrote in message
news:[email protected]...
While doing some stress testing on our WLS server we kept seeing the
following errors:
1) NullPointerException on NTSocketMuxer, error log follows:
Tue Feb 22 05:08:28 EST 2000:<E> <NTSockMux> failure in processSockets()
loop: GetData: fd=16764 numBytes=23
Tue Feb 22 05:08:28 EST 2000:<E> <NTSockMux>
java.lang.NullPointerException: null native pointer - socket was closed
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java,
Compiled Code)
at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:19)
at weblogic.t3.srvr.ExecuteThread.run(ExecuteThread.java, Compiled
Code)
This error doesn't seem to have any immediate impact, although it can't
be a good thing and it seems to happen even at times when we are not
doing stress testing. Also, it is very frequent that we see the above
messages. We are running WLS 4.51 w/ Service Pack 5. I am wondering if
this is a problem w/ Service Pack 5 since I don't see this on another
machine running WLS 4.51 with Service Pack 4. Both are using JDK 1.2.2.
2) Connection Rejected, error log follows:
Tue Feb 22 07:08:16 EST 2000:<W> <ListenThread> Connection rejected:
Login timed out after 15000 msec. The socket came from
[host=207.17.47.141,port=11929,localport=443] See property
weblogic.login.readTimeoutMillis.
I know how to adjust this for this one. My questions on this are:
If I set my readTimeoutMillisSSL (SSL in this case) from 15000 to 30000
what does this exactly mean. Does this mean that instead of allowing a
max 15 seconds for a connection to be established, now I am allowing 30
seconds? Also, is this only for the initial connection establishment (ie
user login), or does this parameter effect other aspects of the
connection later on? What negative side effects would I encounter if I
set this to 60000 (1 minute)?
Finally, what can I do so that a connection does not take over 15
seconds to establish? Note this is not the norm, just happens more often
during stress testing.
3) Creating & Closing connection & DGCserver, log follows:
Tue Feb 22 07:08:44 EST 2000:<I> <RJVM> Closing connection to
138.8.81.19/138.8.81.19 5634583086356155101
Tue Feb 22 07:08:45 EST 2000:<I> <RJVM> Creating connection to
138.8.81.19/138.8.81.19 5634583086356155101
Tue Feb 22 07:08:45 EST 2000:<I> <RJVM> Closing connection to
138.8.81.19/138.8.81.19 5634583086356155101
Tue Feb 22 07:08:50 EST 2000:<I> <RJVM> Creating connection to
144.14.157.204/144.14.157.204 2864292845294268830
Tue Feb 22 07:08:50 EST 2000:<I> <RJVM> Creating connection to
138.8.81.19/138.8.81.19 5634583086356155101
Tue Feb 22 07:08:50 EST 2000:<I> <RJVM> Closing connection to
138.8.81.19/138.8.81.19 5634583086356155101
Tue Feb 22 07:08:50 EST 2000:<I> <RJVM> Creating connection to
138.8.81.19/138.8.81.19 5634583086356155101
Tue Feb 22 07:08:50 EST 2000:<I> <RJVM> Closing connection to
138.8.81.19/138.8.81.19 5634583086356155101
Tue Feb 22 07:08:51 EST 2000:<I> <DGCserver> tried to renew lease for
lost ref: 902
Tue Feb 22 07:08:52 EST 2000:<I> <RJVM> Heartbeat/PublicKey resend
detected
Tue Feb 22 07:08:54 EST 2000:<I> <DGCserver> tried to renew lease for
lost ref: 904
Tue Feb 22 07:08:58 EST 2000:<I> <RJVM> Creating connection to
138.8.81.19/138.8.81.19 5634583086356155101
Why the constant trying to create connection, close connection?
What is DGCserver?
4) Ignoring message from a previous JVM, log follows:
Tue Feb 22 08:29:50 EST 2000:<E> <RJVM> Ignoring message from a previous
generation: JVMMessage from 8729925219143181234C138.8.222.21 to
-3465797227003769874C192.168.100.61 with CMD_ONE_WAY, prtNum=6, ack=103,
seqNum=1384
Tue Feb 22 08:30:15 EST 2000:<I> <HTTPTunneling> Sending DEAD response
What does this mean?
5) PeerGoneExceptions
What causes these?
Our environment is set up as follows:
WLS Server
WLS 4.51 w/ Service Pack 5
NativeIO = true
ExecuteThreadCount = 40
readTimeoutMillis=5000
readTimeoutMillisSSL=10000
Dell Pentium III 600 w/ 512 MB memory
NT 4.0
JavaSoft 1.2.2
-ms128 -mx350
WLS Client
Java Application
t3s and https (using WLS RMI)
JavaSoft 1.1.7b
typically Pentium 200 MHz or better w/ 64MB or more
Basically our clients connect to our WLS server using RMI. Each client
also has a callback object where the server sends event notification
back to the clients. Most of the communication is back through these
client callback objects. Its similar to a stock trading application in
that 1 client incoming requests will generate 200 outgoing events (if
for example there are 200 users on the system). The above observations
where made while 25 very active users where on the system.
Thanks very much for any and all help,
Edwin Marcial
Continental Power Exchange -
Error occured during the "test of the interface"
Hi,everybody
where I do the "Test Configuration" in the ID(Tools->Test Configuration),an error occured.
Internal Error
HTTP connection to ABAP Runtime failed.
Error:403ForbiddenURL:http://NEUESDNWXI01:8001/sap/xi/simulation?sap-client=500
User: PIDIRUSER
what can i do with the error?
ThanksHi
Check if the service for testing in XI (in transaction SCIF)is turned on,
<i>Note :Forebidden is generally an auth or password error. </i>
Also Check This
4) Error: HTTP 403 Forbidden
Description: The server understood the request, but is refusing to fulfill it
Possible Tips:
Path sap/xi/engine not active
HTTP 403 during cache refresh of the adapter framework - Refer SAP Note -751856
Because of Inactive Services in ICF Go to SICF transaction and activate the services. Refer SAP Note -517484
Error in RWB/Message Monitoring- because of J2EE roles Refer SAP Note -796726
Error in SOAP Adapter - "403 Forbidden" from the adapter's servlet. Because of the URL is incorrect or the adapter is not correctly deployed.
Regards
krishna -
Error 7 during assemble test Vis for runtime distribution
I get this error when assembling VIs for Runtime Dist. Probably can't find a file but which Vi is the problem? I tried to open diagram for TestStand - Call Package VIs for Distribution.vi to find the problem vi but it is password protected.
Attachments:
ts_error7.bmp 1678 KBThe code was written in LV 6i and I mass compiled it using LV 7. I was able to assemble for distribution in TS 2.0 but I received an runtime error (VI not executable). I figured that since this code was saved as an llb with vi.lib included I had to remove the vi.lib VIs and reload th source in LV 7.0. I deleted a needed control when I did this and that was what was missing. I included the missing control and was able to assemble my VIs for runtime distribution. One question remains... During a mass compile shouldn't the vi.lib VIs be replaced by the newer versions?
-
AppContainers_test fails with error during pre-test configuration checks
Hello,
AppContainers_test fails with error during pre-test configuration checks:
"[FAIL] The machine is not properly configured for testing: the test directory "C:\Windows\SYSTEM32\" is not ACL'd to allow execute permission for "APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES"
But that kind of permission for APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES was allowed, also i tried to allow full access, but error was the same.
In the test WindowsFilteringPlatform_Tests, the same requirement "REQ - Wfp-based products must not block App Container apps operating within their declared network intentions by default" was checked successfully.
How can i pass successfully AppContainers_test?
I installed lastest versions of QFE and filters on my server, but it didn't help.Hi M'Alerter,
I have the same issue, have you found a solution to your problem ?
Cheers,
Ghalem -
Error during connection test in C4C
Hi,
during connection test in C4C i receive Service-Ping-Error: Internal Server Error (500).
The following error shown in HCI.
Inbound processing in endpoint at https://iflmapgbt104xxxxavtaio-xxxx.intaas.hana.ondemand.com/cxf/COD/ERP/SimpleConnect failed with message "Error reading XMLStreamReader.", caused by "WstxEOFException:Unexpected EOF in prolog
at [row,col {unknown-source}]: [1,0]"
Message Processing Log{
IntermediateError = true
MessageGuid = AFUUKFubmbS4sE_0LvLxGiXTI0v4
Node = xxxxxxxx.od.sap.biz
OverallStatus = FAILED
StartTime = Thu Mar 26 15:40:11 UTC 2015
StopTime = Thu Mar 26 15:40:11 UTC 2015
Children [
An error has occurred in CXF Inbound Request{
Error = Inbound processing in endpoint at https://iflmapgbt104xxxxxavtaio-xxxxx.intaas.hana.ondemand.com/cxf/COD/ERP/SimpleConnect failed with message "Error reading XMLStreamReader.", caused by "WstxEOFException:Unexpected EOF in prolog
at [row,col {unknown-source}]: [1,0]"
StartTime = Thu Mar 26 15:40:11 UTC 2015
Status = FAILED
Can anyone help me on this issue?
Cheers
FlorianHi Ginger,
somehow, yes :-) I deployed the iFlow for customer master replication. After creating a customer the trace looked different and terminated at the reverse proxy. So the simple connect somehow is not able to do the same...
Cheers
Florian -
Test Service Provider throwing an error u201CAn Error occurred during serializa
Hi Experts,
Pl. help me out to solve this error.
When I test my service in Test Service Provider, it is throwing an error u201CAn Error occurred during serialization in the simple transformation program /1Sal/TASC6F348B109136617F160u201D.
Thanks & Regards
T.TamodaraneHi,
Serialization error occurs when you are passing some invalid values.
Example: characters is a numeric field.
Kindly check your input once.
Regards,
Vikas -
RC-00118: Error occurred during creation of database
adcrdb.sh started at Mon Nov 14 16:16:13 EAT 2011
The environment settings are as follows ...
ORACLE_HOME : /u04/d01/tech_st/11.2.0
ORACLE_SID : JCLONE
TWO_TASK :
PATH : /usr/bin:/u04/d01/tech_st/11.2.0/bin:/usr/bin:/usr/sbin:/u0 4/d01/tech_st/11.2.0/jdk/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/u04/ d01/tech_st/11.2.0/appsutil/clone/bin/../jre/jre/bin:/usr/lib/qt-3.3/bin:/usr/ke rberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbi n:/usr/bin:/usr/X11R6/bin:/root/bin:.
LD_LIBRARY_PATH : /u04/d01/tech_st/11.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib :/u04/d01/tech_st/11.2.0/ctx/lib
Executable : /u04/d01/tech_st/11.2.0/bin/sqlplus
The log information will be written to
/u04/d01/tech_st/11.2.0/appsutil/log/JCLONE_oracle/adcrdb_JCLONE.txt
Creating the control file for JCLONE_oracle database ...
SQL*Plus: Release 11.2.0.2.0 Production on Mon Nov 14 16:16:13 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1348968 bytes
Variable Size 427821720 bytes
Database Buffers 629145600 bytes
Redo Buffers 13017088 bytes
CREATE CONTROLFILE REUSE SET DATABASE "JCLONE"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01159: file is not from same database as previous files - wrong database id
ORA-01110: data file 1: '/u04/d01/apps_st/data/system01.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP add tempfile '/u04/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "JCLONE.jtl.co.ke"
ERROR at line 1:
ORA-01109: database not open
ORA-01507: database not mounted
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1348968 bytes
Variable Size 427821720 bytes
Database Buffers 629145600 bytes
Redo Buffers 13017088 bytes
Database mounted.
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-01119: error in creating database file
'/u04/d01/tech_st/11.2.0/dbs/MISSING00015'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 4754
ORA-06512: at line 1
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1348968 bytes
Variable Size 427821720 bytes
Database Buffers 629145600 bytes
Redo Buffers 13017088 bytes
CREATE CONTROLFILE REUSE SET DATABASE "JCLONE"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01159: file is not from same database as previous files - wrong database id
ORA-01110: data file 1: '/u04/d01/apps_st/data/system01.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP add tempfile '/u04/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "JCLONE.jtl.co.ke"
ERROR at line 1:
ORA-01109: database not open
Error Running create/replace library with adupdlib.sql
ORA-01109: database not open
PL/SQL procedure successfully completed.
File created.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Pr oduction
With the Partitioning, OLAP, Data Mining and Real Application Testing options
exit_code=0
Checking for errors ...
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 11.2.0.2.0 Production on Mon Nov 14 16:16:32 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected.
ORACLE instance shut down.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Pr oduction
With the Partitioning, OLAP, Data Mining and Real Application Testing options
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : oracle
sDbDomain : jtl.co.ke
sDbPort : 1524
sDbSid : JCLONE
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@oracle.jtl.co.ke:1524:JCLONE
Exception occurred: java.sql.SQLException: IO Error: The Network Adapter cou ld not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle .jtl.co.ke)(PORT=1524))(CONNECT_DATA=(SERVICE_NAME=JCLONE)))
Exception occurred: java.sql.SQLException: IO Error: The Network Adapter cou ld not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle .jtl.co.ke)(PORT=1524))(CONNECT_DATA=(SERVICE_NAME=JCLONE.jtl.co.ke)))
Exception occurred: java.sql.SQLException: IO Error: The Network Adapter cou ld not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:661)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:328)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:304)
at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:154)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstruct orAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingC onstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:501)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run(Thread.java:595)
Current database Version is 11.2.0.2
Apps Version is 11.5.10.2
RUP version is 6
Forms Patchset version is 19
Please advise how to resolve this error ?
Regards
Mohammed.Please refer to these docs/links.
Troubleshooting RapidClone issues with Oracle Applications 11i [ID 364565.1]
Adcfgclone.pl DBTier is failing with error for dbms_backup_restore.zeroDbid(0) [ID 361157.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=ORA-01503+AND+ORA-01159+AND+ORA-01110&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
Hello there,
I have an Excel report I created which works perfectly fine on my dev environment, but fails on my test environment when I try to do a data refresh.
The key difference between both dev and test environments is that in dev, everything is installed in one server:
SharePoint 2013
SQL 2012: Database Instance, SSAS Instance, SSRS for SharePoint, SSAS POWERPIVOT instance (Powerpivot for SharePoint).
In my test and production environments, the architecture is different:
SQL DB Servers in High Availability (irrelevant for this report since it is connecting to the tabular model, just FYI)
SQL SSAS Tabular server (contains a tabular model that processes data from the SQL DBs).
2x SharePoint Application Servers (we installed both SSRS and PowerPivot for SharePoint on these servers)
2x SharePoint FrontEnd Servers (contain the SSRS and PowerPivot add-ins).
Now in dev, test and production, I can run PowerPivot reports that have been created in SharePoint without any issues. Those reports can access the SSAS Tabular model without any issues, and perform data refresh and OLAP functions (slicing, dicing, etc).
The problem is with Excel reports (i.e. .xlsx files) uploaded to SharePoint. While I can open them, I am having a hard time performing a data refresh. The error I get is:
"An error occurred during an attempt to establish a connection to the external data source [...]"
I ran SQL Profiler on my SSAS Server where the Tabular instance is and I noticed that every time I try to perform a data refresh, I get the following entries:
Every time I try to perform a data refresh, two entries under the user name ANONYMOUS LOGON.
Since things work without any issues on my single-server dev environment, I tried running SQL Server Profiler there as well to see what I get.
As you can see from the above, in the dev environment the query runs without any issues and the user name logged is in fact my username from the dev environment domain. I also have a separated user for the test domain, and another for the production domain.
Now upon some preliminary investigation I believe this has something to do with the data connection settings in Excel and the usage (or no usage) of secure store. This is what I can vouch for so far:
Library containing reports is configured as trusted in SharePoint Central Admin.
Library containing data connections is configured as trusted in SharePoint Central Admin.
The Data Provider referenced in the Excel report (MSOLAP.5) is configured as trusted in SharePoint Central Admin.
In the Excel report, the Excel Services authentication settings is set as "use authenticated user's account". This wortks fine in the DEV environment.
Concerning SecureStore, PowerPivot Configurator has configured it the PowerPivotUnnattendedAccount application ID in all the environments. There is
NO configuration of an Application ID for Excel Services in any of the environments (Dev, test or production). Altough I reckon this is where the solution lies, I am not 100% sure as to why it fails in test and prod. But as I read what I am
writing, I reckon this is because of the authentication "hops" through servers. Am I right in my assumption?
Could someone please advise what am I doing wrong in this case? If it is the fact that I am missing an Secure Store entry for Excel Services, I am wondering if someone could advise me on how to set ip up? My confusion is around the "Target Application
Type" setting.
Thank you for your time.
Regards,
P.Hi Rameshwar,
PowerPivot workbooks contain embedded data connections. To support workbook interaction through slicers and filters, Excel Services must be configured to allow external data access through embedded connection information. External data access is required
for retrieving PowerPivot data that is loaded on PowerPivot servers in the farm. Please refer to the steps below to solve this issue:
In Central Administration, in Application Management, click Manage service applications.
Click Excel Services Application.
Click Trusted File Location.
Click http:// or the location you want to configure.
In External Data, in Allow External Data, click Trusted data connection libraries and embedded.
Click OK.
For more information, please see:
Create a trusted location for PowerPivot sites in Central Administration:
http://msdn.microsoft.com/en-us/library/ee637428.aspx
Another reason is Excel Services returns this error when you query PowerPivot data in an Excel workbook that is published to SharePoint, and the SharePoint environment does not have a PowerPivot for SharePoint server, or the SQL Server Analysis
Services (PowerPivot) service is stopped. Please check this document:
http://technet.microsoft.com/en-us/library/ff487858(v=sql.110).aspx
Finally, here is a good article regarding how to troubleshoot PowerPivot data refresh for your reference. Please see:
Troubleshooting PowerPivot Data Refresh:
http://social.technet.microsoft.com/wiki/contents/articles/3870.troubleshooting-powerpivot-data-refresh.aspx
Hope this helps.
Elvis Long
TechNet Community Support -
Hello all,
I ran into some error during installation. And I need your help in solving this problem. The error occurs during Step Configure (Configuration assistant "Repository Configuration" has failed) and the Repository Configuration in the Installation Progress Details view.
And the error is shown below is from ViewLog and from the terminal where I launched runInstaller. Thank you all in advance for your helps.
ViewLog:
INFO: oracle.sysman.top.oms:Completed Prereq check
INFO: oracle.sysman.top.oms:The plug-in Plugins Prerequisites Check has successfully been performed
INFO: oracle.sysman.top.oms:About to execute plug-in Repository Configuration
INFO: oracle.sysman.top.oms:The plug-in Repository Configuration is running
INFO: oracle.sysman.top.oms:Internal PlugIn Class: oracle.sysman.oms.RepositoryConfiguration
INFO: oracle.sysman.top.oms:Classpath = /test/vince/em_install/oem_mgr/oms/sysman/jlib/emprereqkit.jar:/test/vince/em_install/oem_mgr/oms/sysman/jlib/emCoreSDK.jar:/test/vince/em_install/oem_mgr/oms/sysman/jlib/omsConfig.jar:/test/vince/em_install/oem_mgr/oms/jdbc/lib/ojdbc6.jar:/test/vince/em_install/oem_mgr/oms/sysman/jlib/emcore_client.jar:/test/vince/em_install/oem_mgr/oms/../modules/com.bea.core.apache.log4j_1.2.13.jar:/test/vince/em_install/oem_mgr/oms/jlib/rcucommon.jar:/test/vince/em_install/oem_mgr/oms/jdbc/lib/ojdbc6.jar:/test/vince/em_install/oem_mgr/oms/sysman/jlib/emagentSDK.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.xdk_11.1.0/xmlparserv2.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.odl_11.1.1/ojdl.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.xdk_11.1.0/xml.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.dms_11.1.1/dms.jar:/test/vince/em_install/oem_mgr/oms/../oracle_common/modules/oracle.odl_11.1.1/ojdl.jar:/test/vince/em_install/oem_mgr/oms/jlib/rcu.jar
INFO: oracle.sysman.top.oms:BaseConfiguration:invoke:Starting BaseConfiguration invoke method on an aggregate=oracle.sysman.top.oms for Action=configuration in step=2:microstep=0
INFO: oracle.sysman.top.oms:Inside perform method
INFO: oracle.sysman.top.oms:Running the Schema Action...
INFO: oracle.sysman.top.oms:Setting required properties
INFO: oracle.sysman.top.oms:REPOS_USER: SYSMAN
INFO: oracle.sysman.top.oms:SYS_USER: SYS
INFO: oracle.sysman.top.oms:CONNECT_STRING: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:ORACLE_HOME: /test/vince/em_install/oem_mgr/oms
INFO: oracle.sysman.top.oms:mgmtTabLoc :
INFO: oracle.sysman.top.oms:confDataTabLoc :
INFO: oracle.sysman.top.oms:defaultDataFileLoc :
INFO: oracle.sysman.top.oms:ad4jDataTabLoc :
INFO: oracle.sysman.top.oms:EMSCHEMA MANAGER: oracle.sysman.emdrep.schemamanager.EMSchemaManager@31e5eb16
INFO: oracle.sysman.top.oms:The required parameters are set for schemamanager
INFO: oracle.sysman.top.oms:Starting both repos upgrade and transx loading in parallel
INFO: oracle.sysman.top.oms:EMSCHEMA MANAGER: create oracle.sysman.emdrep.schemamanager.EMSchemaManager@31e5eb16
INFO: oracle.sysman.top.oms:create_process_id:a5v5w4b86ftf
INFO: oracle.sysman.top.oms:The command run for transx is /test/vince/em_install/oem_mgr/oms/sysman/admin/emdrep/bin/RepManager -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl))) -action transx -repos_user SYSMAN -dbUser SYS -mwHome /test/vince/em_install/oem_mgr -mwOraHome /test/vince/em_install/oem_mgr/oms
INFO: oracle.sysman.top.oms:processing arguments
INFO: oracle.sysman.top.oms:compiling arguments for validation
INFO: oracle.sysman.top.oms:stty: standard input: Invalid argument
INFO: oracle.sysman.top.oms:stty: standard input: Invalid argument
INFO: oracle.sysman.top.oms: Enter SYSMAN repository password :
INFO: oracle.sysman.top.oms:stty: standard input: Invalid argument
INFO: oracle.sysman.top.oms:stty: standard input: Invalid argument
INFO: oracle.sysman.top.oms:Verify :
INFO: oracle.sysman.top.oms:Enter password for: SYSMAN
INFO: oracle.sysman.top.oms: done checking required user credentials...
INFO: oracle.sysman.top.oms:done creating arguments...
INFO: oracle.sysman.top.oms:creating logger..
INFO: oracle.sysman.top.oms: Connection exception in action logger path calculated: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/
INFO: oracle.sysman.top.oms: action logger path calculated: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/
INFO: oracle.sysman.top.oms: action logger path calculated finally: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/
INFO: oracle.sysman.top.oms: no action logger file name from previous session
INFO: oracle.sysman.top.oms: action logger filename after search: emschema.log
INFO: oracle.sysman.top.oms: action logger filename finally: emschema.log
INFO: oracle.sysman.top.oms:Logger FileName:/test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/emschema.log
INFO: oracle.sysman.top.oms:already exists: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/emschema.log
INFO: oracle.sysman.top.oms:oracleHome: /test/vince/em_install/oem_mgr/oms
INFO: oracle.sysman.top.oms:connect_string: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:done connection validation without error
INFO: oracle.sysman.top.oms:action to perform is: transx
INFO: oracle.sysman.top.oms:action to be performed:TRANSX
INFO: oracle.sysman.top.oms:action is transx - non RCU based action
INFO: oracle.sysman.top.oms: action logger path calculated finally: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/
INFO: oracle.sysman.top.oms: action logger path calculated finally: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/
INFO: oracle.sysman.top.oms: action logger filename finally: emschema.log.TRANSX
INFO: oracle.sysman.top.oms:Logger FileName:/test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/emschema.log.TRANSX
INFO: oracle.sysman.top.oms:newly created: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/emschema.log.TRANSX
INFO: oracle.sysman.top.oms: action logger path calculated finally: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/
INFO: oracle.sysman.top.oms:process_id:132hgzixoqx34
INFO: oracle.sysman.top.oms:Initialization...
INFO: oracle.sysman.top.oms:Driver: oracle.jdbc.driver.OracleDriver
INFO: oracle.sysman.top.oms:jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
INFO: oracle.sysman.top.oms:Failure...
INFO: oracle.sysman.top.oms:exiting the thread...
INFO: oracle.sysman.top.oms:[Initializing the EM RCU Runner, Failed Parameter Validation]
INFO: oracle.sysman.top.oms: action logger path calculated finally: /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0420_PM/m_092513_0420_PM.TRANSX/
INFO: oracle.sysman.top.oms:The transx command execution is completed with the status 255
INFO: oracle.sysman.top.oms:transx_retCode:255
INFO: oracle.sysman.top.oms:The transx action failed, Run the RepManager with -action transx
INFO: oracle.sysman.top.oms:process_id:a5v5w4b86ftf
INFO: oracle.sysman.top.oms:Failure...
INFO: oracle.sysman.top.oms:1 error(s) happened in performing the action:
INFO: oracle.sysman.top.oms:1):
ORA-65096: invalid common user or role name
File:/test/vince/em_install/oem_mgr/oms/sysman/admin/emdrep/sql/core/latest/admin/admin_create_repos_user.sql
Statement:CREATE USER SYSMAN IDENTIFIED BY ****** DEFAULT TABLESPACE MGMT_TABLESPACE QUOTA UNLIMITED ON MGMT_TABLESPACE TEMPORARY TABLESPACE TEMP
INFO: oracle.sysman.top.oms:The plug-in Repository Configuration has failed its perform method
Terminal:
PLUGIN_DEP_LIST={}
PLUGIN_PURGE_LIST={}
jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
Processing command line ....
Repository Creation Utility - Checking Prerequisites
Checking Global Prerequisites
Repository Creation Utility - Checking Prerequisites
Checking Component Prerequisites
Repository Creation Utility - Creating Tablespaces
Validating and Creating Tablespaces
Repository Creation Utility - Create
Repository Create in progress.
Percent Complete: 5
Percent Complete: 30
Percent Complete: 55
Percent Complete: 80
RCU-6130:Action failed - RCU-6134:Error while trying to execute JDBC action.
Repository Creation Utility: Create - Completion Summary
Database details:
Connect Descriptor : (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsn175-105.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
Connected As : SYS
RCU Logfile : /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0419_PM/m_092513_0419_PM.CREATE/rcu.log
RCU Checkpoint Object : /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager//RCUCheckpointObj
Component schemas created:
Component Status Logfile
EM Repository Creation Configuration Failed No log created
EM Repository Init Configuration Failed No log created
EM Repository Common Failed /test/vince/em_install/oem_mgr/oms/sysman/log/schemamanager/m_092513_0419_PM/m_092513_0419_PM.CREATE/em_repos_common.log
Repository Creation Utility - Create : Operation CompletedYou are using DB12 as EM repository which is not certified. From the log, ORA-65096: invalid common user or role name , some people have reported similar issue while using DB12 as their repository.
If this not the case then log an SR with oracle support and upload the logs:
- $ORACLE_HOME/sysman/log/schemamanager zipped
- $ORACLE_HOME/cfgtoollogs/ zipped
- central inventory logs -
An error occurred during olap API metadata retrieval. This is probably caus
this is what i have done so far. i really nead some help asap!!!
1. Install Oracle 9i Release 2 (9.2.0.1) Enterprise Edition with the General purpose database configuration (Data warehouse works as well). At the end of the installation I chose the password management button to change passwords for the few necessary accounts: SYS, SYSTEM, OLAPSYS, SH.
2. Download the p3948480_9206_WINNT.zip from metalink, the 9.2.0.6 patchset
3. Shut down any existing Oracle9i database instances with normal or immediate priority. Stop all listener and other services running in the Oracle home directory where you want to install the patch set.
4. unzip the content of thepatch to a temp directory
5. start setup.exe under the temp directory (it will start the Oracle Universal installer 10.1.0.3)
6. install the patchset to your Oracle home, selecting the source in the temp_dir\stage\products.jar file
7. review carefully the post-installation tasks for the patchset:
Review the following sections before upgrading a database (quote from the patchset html readme):
8.2.1.1If JServer is part of the installation ensure that there is at least 10 MB of free space allocated to the SYSTEM tablespace.
8.2.1.2 Check XDB Tablespace Size
For RAC installations, ensure that there is at least 50 MB of free space allocated to the XDB tablespace.
8.2.1.3 Set the SHARED_POOL_SIZE and JAVA_POOL_SIZE Initialization Parameters
Set the value of the SHARED_POOL_SIZE and the JAVA_POOL_SIZE initialization parameters as follows:
Start the database:
SQL> STARTUP
If necessary, enter the following command to determine whether the system uses an initialization parameter file (initsid.ora) or a server parameter file (spfiledbname.ora):
SQL> SHOW PARAMETER PFILE;
This command displays the name and location of the server parameter file or the initialization parameter file.
Determine the current values of these parameters:
SQL> SHOW PARAMETER SHARED_POOL_SIZE
SQL> SHOW PARAMETER JAVA_POOL_SIZE
If the system is using a server parameter file:
If necessary, set the value of the SHARED_POOL_SIZE initialization parameter to at least 150 MB:
SQL> ALTER SYSTEM SET SHARED_POOL_SIZE='150M' SCOPE=spfile;
If necessary, set the value of the JAVA_POOL_SIZE initialization parameter to at least 150 MB:
SQL> ALTER SYSTEM SET JAVA_POOL_SIZE='150M' SCOPE=spfile;
If the system uses an initialization parameter file, if necessary, change the values of the SHARED_POOL_SIZE and the JAVA_POOL_SIZE initialization parameters to at least 150 MB in the initialization parameter file (initsid.ora).
Shut down the database:
SQL> SHUTDOWN
8.2.2 Upgrade the Database
After you install the patch set, you must complete the following steps on every database associated with the upgraded Oracle home:
Log on as a member of the Administrators group to the computer where the Oracle components are installed.
Use SQL*Plus to login to the database as the SYS user with SYSDBA privileges:
sqlplus /NOLOG
CONNECT SYS/password AS SYSDBA
Enter the following SQL*Plus commands:
SQL> STARTUP MIGRATE
SQL> SPOOL patch.log
SQL> @ORACLE_BASE\ORACLE_HOME\rdbms\admin\catpatch.sql
SQL> SPOOL OFF
Restart the database:
SQL> SHUTDOWN
SQL> STARTUP
Run the utlrp.sql script to recompile all invalid PL/SQL packages now instead of when the packages are accessed for the first time. This step is optional but recommended.
SQL> @ORACLE_BASE\ORACLE_HOME\rdbms\admin\utlrp.sql
12. Install JDeveloper 9.0.4 (download it from OTN and just unzip it in a directory ... it doesn't require an oracle home)
13. Install BI Beans 9.0.4 (download it from OTN as well), run the setup.exe that comes with it and in the destination oracle home select the directory where you installed JDeveloper and give an oracle home name to it)
14. Install the BIBDEMO schema:
Create a directory on the computer that is running the Oracle9i database. This install_home directory is the location to which you will upload the data files that are required to build the BIBDEMO schema.
On the computer where BI Beans is installed, locate the bibeans_home\bibdemo_schema folder (where bibeans_home is the root folder of your BI Beans installation). Copy all of the files found in this folder to the install_home folder on your server machine.
Open a DOS prompt and navigate to the install_home folder.
Run bibdemo.bat to install the schema, using the following syntax:
bibdemo.bat <path to Oracle database files >
For example, for an instance named my9iService, enter the following:
bibdemo.bat D:\OraHome1\oradata\my9iService
You are prompted for the password for the sys as sysdba user.
The script takes approximately 15 minutes to run, depending on the machine specifications. It is normal to see some error messages while the script is running. In addition, when materialized views are being created in the database, the script will appear to stop; this is also normal. A clear message will tell you when the script has completed.
The log files (*.log) that are generated by the installation script are stored in the folder from which you ran the script.
Here's what
bi_checkconfig.bat -h ana -po 1521 -sid proiect -u bibdemo -p bibdemo -q
returned:
BI Beans Diagnostics(v1.0.2.0) 2/28/05
===============================================================================
JDEV_ORACLE_HOME .......................... = E:\OraDS
JAVA_HOME ................................. = E:\OraDS\jdk
JDeveloper version ........................ = 9.0.4.1.1.1436
BI Beans release description .............. = BI Beans 9.0.4 Production Release
BI Beans component number ................. = 9.0.4.23.0
BI Beans internal version ................. = 2.7.5.32
Connect to database ....................... = Successful
JDBC driver version ....................... = 9.2.0.4.0
JDBC JAR file location .................... = E:\OraDS\jdev\lib\patches
Database version .......................... = 9.2.0.6.0
OLAP Catalog version ...................... = 9.2.0.1.0
OLAP AW Engine version .................... = 9.2.0.1.0
OLAP API Server version ................... = 9.2.0.1.0
BI Beans Catalog version .................. = N/A; not installed in bibdemo
OLAP API JAR file version ................. = 9.2
OLAP API JAR file location ................ = E:\OraDS\jdev\lib\ext
Load OLAP API metadata .................... = Successful
Number of metadata folders ................ = 2
Number of metadata measures ............... = 12
Number of metadata dimensions ............. = 8
Testing sample query for measures and dimensions
(S=Schema, C=Cube, M=Measure, D=Dimension)
1/21) Measure Budget ................... = Successful
S=BIBDEMO, C=BIBDEMO_BUDGET_CUBE, M=BUDGET
2/21) Measure Actual ................... = Successful
S=BIBDEMO, C=BIBDEMO_ACTUAL_CUBE, M=ACTUAL
3/21) Measure Close Price .............. = Successful
S=BIBDEMO, C=BIBDEMO_STKPRICE_CUBE, M=STKPRICE_CLOSE
4/21) Measure Open Price ............... = Successful
S=BIBDEMO, C=BIBDEMO_STKPRICE_CUBE, M=STKPRICE_OPEN
5/21) Measure Low Price ................ = Successful
S=BIBDEMO, C=BIBDEMO_STKPRICE_CUBE, M=STKPRICE_LOW
6/21) Measure High Price ............... = Successful
S=BIBDEMO, C=BIBDEMO_STKPRICE_CUBE, M=STKPRICE_HIGH
7/21) Measure Stock Volume ............. = Successful
S=BIBDEMO, C=BIBDEMO_STKPRICE_CUBE, M=STKPRICE_VOLUME
8/21) Dimension Division ............... = Successful
S=BIBDEMO, D=DIVISION
9/21) Dimension Line Items ............. = Successful
S=BIBDEMO, D=LINE
10/21) Dimension Time ................... = Successful
S=BIBDEMO, D=TIME
11/21) Dimension Day .................... = Successful
S=BIBDEMO, D=DAY
12/21) Dimension Stock .................. = Successful
S=BIBDEMO, D=STOCK
13/21) Measure Costs .................... = Successful
S=BIBDEMO, C=ANALYTIC_CUBE, M=F.COSTS
14/21) Measure Promotion ................ = Successful
S=BIBDEMO, C=ANALYTIC_CUBE, M=F.PROMO
15/21) Measure Quota .................... = Successful
S=BIBDEMO, C=ANALYTIC_CUBE, M=F.QUOTA
16/21) Measure Units .................... = Successful
S=BIBDEMO, C=ANALYTIC_CUBE, M=F.UNITS
17/21) Measure Sales .................... = Successful
S=BIBDEMO, C=ANALYTIC_CUBE, M=F.SALES
18/21) Dimension Channel ................ = Successful
S=BIBDEMO, D=CHANNEL
19/21) Dimension Geography .............. = Successful
S=BIBDEMO, D=GEOGRAPHY
20/21) Dimension Product ................ = Successful
S=BIBDEMO, D=PRODUCT
21/21) Dimension Time ................... = Successful
S=BIBDEMO, D=TIME
Metadata output location .................. = E:\OraDS\bibeans\bi_checkconfig\bi
_metadata.txt
To interpret this output, see the "Displaying Information about your Oracle9i Bu
siness Intelligence Beans Client Configuration" technical note, whose file name
is bi_checkconfig_tn.html
These diagnostics are captured in: E:\OraDS\bibeans\bi_checkconfig\bi_checkconfi
g.xml
now: i have created some new stuff:
1). user ana with roles:
-dba
-olap_dba
-connect
-resource
(same roles as bibdemo)
2).schema ana; tablespace ana (permanent), tablespace anatemp (temporary)
3).i have created some relational tables and i have inserted some data in them:
agent, aparat (cofee machines), beneficiar (clients), locatii (city), raport (REPORT), timp (time), tipaparat (types of cofee machines), tipbautura (products : types of cofee made by all the cofee machines), zone (state)
4). one fact table with:
- sold cantity (measure)
- id_bautura (id_product) primary key
- id_timp(id_time) primary key
- id_beneficiar (id_client) primary key
- id_agent primary key
- id_locatie (id_city) primary key
- id_aparat (id_cofee_machine)primary key
i have inserted some data also
5).dimensions:
AGENT_DIM :levels: codag(id_agent), numeag (agent name), telefag (agent phone number)from relational table agent
BENEFICIAR_DIM :levels: codben (id_client), denumire (client name), adresa (adress) ,codl (id_city) etc from relatinal table beneficiar (clients)
TIMP_DIM :levels: id, year, month from relational table timp (time)
TIPBAUTURA_DIM :levels: codbautura (id_product), numebautura (product name)from relational table tipbautura (products)
ZONA_DIM :levels: codzona (id state), numezona (state name), codoras (id city), numeoras (city name) with ierarhy id_state---id_city FROM 2 RELATINAL TABLES CITY AND STATE!!!!!!!! AM I ALOUD TO DO THAT?????
DO I NEED TO CREATE A DIMENSION FROM ONLY ONE TABLE???????
APARAT_DIM :LEVELS: codben (id client), codtip (id machine type), denumireap (machine type name), matricolap ((machine id) (FROM 2 RELATIONAL TABLES ALSO!!!!!!! FROM TYPES OF COFEE MACHINES AND COFEE MACHINES!!!!!
6). I HAVE NOW CREATED THE CUBE FROM THE FACT TABLE AND WITH ALL THE DIMENSIONS
7). summary advisor wizard NOT WORKING! IT NEVER STOPS!
8). I HAVE CREATED ALSO ONE materialized view FOR THE CUBE
IF I COMPILE IT... NO ERRORS
9). CUBE VIEWER NOT WORKING!!!!!!! IT ONLY APEARS A BELL!!!
NOW IF I RUN BI_CHECK CONFIG ON ANA AND ALSO ON BIBDEMO!!!!!!!!!!!!
IT SAYS:
1) An error occurred during olap API metadata retrieval. This is probably caused by inconsistent metadata.
============================================================================
oracle.express.ExpressServerExceptionError class: Unknown Error
Server error descriptions:
INI: System failure, Generic at TxsOqConnection::getDefaultDatabase
at oracle.express.olapi.data.full.ExpressDataProvider.getMetadataProviderInterface(ExpressDataProvider.java:1003)
at oracle.olapi.metadata.MetadataFetcher.initialize(MetadataFetcher.java:73)
at oracle.olapi.metadata.MetadataFetcher.<init>(MetadataFetcher.java:45)
at oracle.olapi.metadata.BaseMetadataProvider.<init>(BaseMetadataProvider.java:47)
at oracle.olapi.metadata.mdm.MdmMetadataProvider.<init>(MdmMetadataProvider.java:130)
at oracle.express.olapi.data.full.ExpressDataProvider.getDefaultMetadataProvider(ExpressDataProvider.java:964)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverImpl_92.getMdmMetadataProvider(MDMMetadataDriverImpl_92.java:1133)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverImpl_92.attach(MDMMetadataDriverImpl_92.java:810)
at oracle.dss.metadataManager.server.drivers.mdm.MDMMetadataDriverImpl.attach(MDMMetadataDriverImpl.java:125)
at oracle.dss.metadataManager.server.MetadataManagerImpl.buildObjectModel(MetadataManagerImpl.java:1092)
at oracle.dss.metadataManager.server.MetadataManagerImpl.attach(MetadataManagerImpl.java:969)
at oracle.dss.metadataManager.client.MetadataManager.attach(MetadataManager.java:876)
at oracle.dss.metadataManager.client.MetadataManager.attach(MetadataManager.java:799)
at BICheckConfig.checkConnection(BICheckConfig.java:277)
at BICheckConfig.main(BICheckConfig.java:1348)
I TRYED ALSO WITH USER ANA WITH ROLES:
- DBA
- CONNECT
-RESOURCE
- OLAP_USER
NOT WORKING! AND ALSO BIBDEMO NOT WORKING!
WHAT AM I MISSING? SHOULD I USE AW MANAGER? OR DO I NEED TO CREATE AN AMNALITIC WORKSPACE???
WHAT ARE THE STEPS TO CREATE A GOOD METADATA????Hi,
The issue here is if the whole catalog is corrupt or just one schema. So to try and determine the status of the catalog I would try:
1) Using OEM remove all the objects you created
2) I presume you created your database using the Database Configuration Assistant? You should have used the warehouse template
3) Make sure the following accounts are unlocked and also not expired : SH, OLAPSYS
4) Make sure the password for the SH schema is SH
5) Make sure the password for the OLAPSYS account is manager
6) Install the BIBDEMO schema that is shipped with BI Beans. This in the jdev_home/bibeans/bibdemo_schema
The installation process will remove SH schema from the OLAP catalog.
7)Once this is installed use JDeveloper to see if you can create a crosstab or graph.
8) If the BIBDEMO schema works try creating your new schemas one at a time.
9) Make sure the if you define the a dimension as type time it has END_DATE (column type DATE) and TIME_SPAN (column type number) defined. Otherwise don't define the dimension as type time.
Hope this helps
Keith Laker
Product Manager
Oracle Business Intelligence Beans -
RC-00118: Error occurred during creation of database Raised by oracle.apps.
Hi Experts,
Please note i am doing the clonning from production to test server.
Production Server -
1. Run the adpreclone.pl on the apps & db tier.
2. run the autoconfig on the apps and db tier.
3. shut down the production instance.
4. Moved the files and started the clonning process on the db tier i am getting the below issue.
My current E-Business Suit Version is R12.0.4 Database Version is 10.2.0.3. Operating system is SUN SPARC 64 BIT SUN SOLARIS 10.
Executing CreateDB...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : proddb
sDbDomain : clientdomain
sDbPort : 1530
sDbSid : TEST
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@proddb.clientdomain:1530:TEST
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST)))
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
adcrdb.sh started at Wed Mar 21 18:09:54 WAT 2012
The environment settings are as follows ...
ORACLE_HOME : /erptestdata2/u01/d01/tech_st/10.2.0
ORACLE_SID : TEST
TWO_TASK :
PATH : /erptestdata2/u01/d01/tech_st/10.2.0/perl/bin:/erptestdata2/u01/d01/tech_st/10.2.0/bin:/usr/ccs/bin:/usr/sbin:/erptestdata2/u01/d01/tech_st/10.2.0/appsutil/jre/bin:/erptestdata2/u01/d01/tech_st/10.2.0/appsutil/clone/bin/../jre/bin:/erptestdata2/u01/d01/tech_st/10.2.0/appsutil/clone/bin/../jre/bin:/usr/sbin:/usr/bin:/opt/EMCpower/bin:/etc/emc/bin:/etc:/usr/ccs/bin:/usr/openwin/bin:/usr/dt/bin:/usr/platform/SUNW,SPARC-Enterprise/sbin:/opt/sun/bin:/opt/SUNWexplo/bin:/opt/SUNWsneep/bin
LD_LIBRARY_PATH : /erptestdata2/u01/d01/tech_st/10.2.0/lib:/usr/dt/lib:/usr/openwin/lib:/erptestdata2/u01/d01/tech_st/10.2.0/ctx/lib:/erptestdata2/u01/d01/tech_st/10.2.0/lib32
Executable : /erptestdata2/u01/d01/tech_st/10.2.0/bin/sqlplus
The log information will be written to
/erptestdata2/u01/d01/tech_st/10.2.0/appsutil/log/TEST_proddb/adcrdb_TEST.txt
Creating the control file for TEST_proddb database ...
SQL*Plus: Release 10.2.0.3.0 - Production on Wed Mar 21 18:09:54 2012
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size 2035496 bytes
Variable Size 432017624 bytes
Database Buffers 624951296 bytes
Redo Buffers 14737408 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01167: two files are the same file/group number or the same file
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/olap.dbf'
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/odm.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp02.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp03.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp04.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp10a5.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.clientdomain"
ERROR at line 1:
ORA-01109: database not open
ORA-01507: database not mounted
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size 2035496 bytes
Variable Size 432017624 bytes
Database Buffers 624951296 bytes
Redo Buffers 14737408 bytes
ORA-00205: error in identifying control file, check alert log for more info
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-00210: cannot open the specified control file
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 4168
ORA-06512: at line 1
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size 2035496 bytes
Variable Size 432017624 bytes
Database Buffers 624951296 bytes
Redo Buffers 14737408 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01167: two files are the same file/group number or the same file
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/olap.dbf'
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/odm.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp02.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp03.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp04.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp10a5.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.clientdomain"
ERROR at line 1:
ORA-01109: database not open
Error Running create/replace library with adupdlib.sql
ORA-01109: database not open
PL/SQL procedure successfully completed.
File created.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
exit_code=0
Checking for errors ...
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 10.2.0.3.0 - Production on Wed Mar 21 18:10:16 2012
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected.
ORACLE instance shut down.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : proddb
sDbDomain : clientdomain
sDbPort : 1530
sDbSid : TEST
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@proddb.clientdomain:1530:TEST
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST)))
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
Please advise ASAP.
Regards
Mohammed.Nikki,
Check alert<SID>.log file for more details about the error.
It looks like that the source database was not cleanly shutdown before copying the files to the target node. Please do the following and check then:
SQL> connect / as sysdba
SQL> startup mount;
SQL> recover database using backup controlfile until cancel;
-- type CANCEL
SQL> alter database open resetlogs; If the above does not help, then shutdown the source database normally (make sure it is down), re-copy the files and start the cloning process again. -
RC-00118: Error occurred during creation of databas
On 11.5.9 with windows, while running the clone with the following command:
perl adcfgclone.pl dbTier
The following error occurs:
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 581506616 bytes
Fixed Size 452152 bytes
Variable Size 402653184 bytes
Database Buffers 167772160 bytes
Redo Buffers 10629120 bytes
Control file created.
alter database open resetlogs
ERROR at line 1:
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/u1/TEST/testora/testdata/system01.dbf'
alter tablespace TEMP add tempfile '/u1/TEST/testora/testdata/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP add tempfile '/u1/TEST/testora/testdata/temp02.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.zexsa.com"
ERROR at line 1:
ORA-01109: database not open
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:658)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:328)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:304)
at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:154)
at java.lang.reflect.Constructor.newInstance(Native Method)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run(Thread.java:479)
I found note no. 375389.1 similar to this issue.
Any body guide me, about solution no-1, how i can apply it.
after running perl adcfgclone.pl dbTier
my DB is on above mentioned stage....SQL*Plus: Release 10.2.0.4.0 - Production on Sun Feb 13 21:52:19 2011
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to an idle instance.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size 1271540 bytes
Variable Size 427821324 bytes
Database Buffers 633339904 bytes
Redo Buffers 11309056 bytes
Database mounted.
SQL> recover database using backup controlfile until cancel;
ORA-00283: recovery session canceled due to errors
ORA-00600: internal error code, arguments: [kcvhvdf_1], [], [], [], [], [], [],
SQL> -
Hello All,
Posting this problem here and hoping for a solution from the experts in this forum.
When i have restarted the Analysis Services , i see that it has been stopped but never started back. It fails with an error
"The SQL Server Analysis Services (MSSQLSERVER) service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
When Checked the Event Viewer i see the following error -
The service cannot be started: The following system error occurred: The filename, directory name, or volume label syntax is incorrect. File system error: Error occurred during the creation of directory: '\\?\E:\OLAP\MSSOLAPFactory\OlapData;M:\Test
Backup'.
I remember changing the BackupDir value of Analysis Services few days back, and i think it could have impacted. Can you please help me how can i change back the BackupDir value and have the server back?
Let me know if you need any more details
SGIs this still an issue? If so, I would find msmdsrv.ini and make sure you don't have two folders listed in the BackupDir (or DataDir or TempDir). You'll have to runas Administrator to edit the msmdsrv.ini file and save changes. Once you fix that, it should
succeed.
http://artisconsulting.com/Blogs/GregGalloway -
Hello,
I'm getting the following error when I use the search in the Portal:
Error occurred during search: com.sapportals.wcm.WcmException: error: communication with preprocessor failed;index=teste,location=cdphl815:30203 (Errorcode 42)
That's probably an indexing error:
Indexing document failed. Preprocessor: failed (Errorcode 6800)
But I don't know what to do to fix this.
Please... help me!!
Thanks
LuisaHi Luisa,
It might help:
Trex Administration Tool:
http://help.sap.com/saphelp_erp2004/helpdata/en/23/92bd4016c0cc38e10000000a155106/frameset.htm
General TREX Configuration :
http://help.sap.com/saphelp_erp2004/helpdata/en/c2/d81e40777cdd5fe10000000a155106/frameset.htm
Post-Installation Activities :
http://help.sap.com/saphelp_erp2004/helpdata/en/8b/1cc83edf72e16be10000000a114084/frameset.htm
Hope it helps,
Yoav
Maybe you are looking for
-
How do I make a background photo in a folder permanent on a burned CD?
I'm trying to burn a CD with a folder that has a custom picture in the background. I can get the burned CD to show up on my own computer but when I put the disc in another computer, the picture disappears. Does anyone have a trick for making the back
-
Hi, I am having an Interface Mapping involving two mapping programs in the following sequence: 1) Message Mapping 2) Java Mapping There are two Message Interfaces on the source side and one MI on the target side. Now the problem is that only the Java
-
Background image doesn't preview in browser
Is there something I'm not understanding about my Dreamweaver Site settings? I'm trying to code a site using CSS which has a background image in a div but it won't preview in the browser. When the file is linked to an external style sheet, it display
-
Transfer of FI entries from wrong Fund Centre to correct Fund Centre
Dear Gurus While posting a FI document suppose cost centre 123456 is use .This cost centre is mapped to Fund Centre ABC.Due to posting in cost centre 123456, funds in Fund centre ABC was used.Later it came to know that Fund Centre ABC is wrongly mapp
-
Any solution to the h.264 gamma bug?
I am one of those victims of the h.264 gamma bug. When I compress a movie out of Final Cut Pro using h.264, the gamma in the resulting video is too bright, making the movie look washed out. This happens regardless of whether I use Compressor or Quick