Error 1074396120 appears when using IMQA copy

error 1074396120 appears when using IMQA copy,when i used in vision its working but when i tried to execute in labview its showing error image not found and not valid image. pls help me regarding this .

Have a look
Thanks and Regards
Himanshu Goyal | LabVIEW Engineer- Power System Automation
Values that steer us ahead: Passion | Innovation | Ambition | Diligence | Teamwork
It Only gets BETTER!!!

Similar Messages

  • Error message appears when using compressor

    What means this error message (it's in a French version of Compressor 4) : "Failure : Quicktime error : - 50" ?

    Hi Thot, just trawling these forums looking for some info.. I noticed this.... yeah the QT error -50 comes up.. cant find a specific reason. I had this has with a job I submitted via FCPX ti Compressor.app via "send to compressor". I recall a thread somewhere in these forums that this error was a result of genuine Quicktime error whilst performing work on one or more effects in FCPX.
    So I simply went in and redid the effects in FCPs. It was something simple like a cross dissolves.
    In any case if you are gettingt this error from a comperssor submittion of SHARE from FCPX and you see it in compressor., it might be worth do a trial and error on your FCPX storyline.
    Simply make a few test projects and try to narrow down withe effect is causing this issue.
    worth a look
    w
    Hong Kong

  • The operation can't be completed because an unexped error occurred (error code-50).   This appears when I'm copying a file to the drive and then I wasn't able to edit to my drive.  Then this morning I can't open my project file.  What to do?

    Message: The operation can't be completed because an unexped error occurred (error code-50).
    This appears when I'm copying a file to the drive and then I wasn't able to edit to my drive.
    Then this morning I can't open my project file.  I get this message: The project appears to be damaged, it cannot be opened.
    What should I do!??
    I  have moved my project onto 2 different external hard-drives now.

    Hi There,
    After looking around for this error, it seems to be related to OS, we would recommend you to contact Apple support for this.
    Thanks,
    Atul Saini

  • "Internal Error Occurred" appears when .pdf is opened from Outlook 2010 email

    "Internal Error Occurred" appears when .pdf is opened from Outlook 2010 email
    I am absolutely pulling out my hair over this one!!
    PC/Win 7 64bit/Adobe XI/Office 2010
    I have tried Uninstalling and re-installing
    I have tried using an adobe software removal tool
    I have tried modifying the security settings in reader
    I've tried running repair on MS Office
    If you open the .pdf from an email directly, it opens Reader with the error "Internal Error Occurred"
    If you drag and drop the .pdf onto the desktop, and then open it, it opens.
    If you open Adobe Reader FIRST, then open the .pdf from the email, it opens fine.
    ONLY when you open a .pdf from an email with Adobe Reader closed (so Outlook is asking AR to open first, and then present the .pdf) is it behaving this way.
    Hypothesis: Outlook 2010 does not like to open Adobe Reader.
    SO....tell me all of you brilliant geniuses? How do I solve this puzzle and become an end user's hero?
    PS: WorkAround - the only work around I have found for this at present, is that the user first opens up Adobe Reader and lets it run in the background. I pinned the shortcut to his task bar to remind him.

    I have uninstalled Adobe Acrobat Reader DC and installed Adobe Reader XI and everything works fine. This will be our current fix until a solution is found for the above error

  • My files, photos, email files, software programs, and all information did NOT transfer over to Mavericks (from Mt. Lion).  How do I get all my stuff to appear when using Mavericks?

    Will someone please help me?
    My files, photos, email files, software programs, calendar info, and all information did NOT transfer over to Mavericks (from Mt Lion).  How do I get all my stuff to appear when using Mavericks?
    My email did transfer over.
    Thank you.

    First click on the Apple > Logout and Log back in or restart the unit see if that solves it.  If it doesn't do you have a backup of your system prior to upgrade?  Check Disk Utility and see how much space is being used to make sure the drive wasn't somehow erased.

  • Error message appears when trying to start server in VM Manager

    Error message appears when trying to start server in VM Manager
    OVMAPI_4005E No worker server found to perform operation on: OracleVMsrv-1
    When trying to restart server:
    OVMRU_004007E Cannot perform the operation. Server: OracleVMsrv-1, is not running.

    Hey SDGardella,
    Thanks for the question. I understand that you are receiving error 499 when attempting to download purchases from the iTunes Store. The following resource outlines this error message:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    "Error 499"
    This alert occurs due to security software. Follow iTunes for Windows: Troubleshooting security software issues.
    Thanks,
    Matt M.

  • Images on Facebook do not appear when using different web browsers

    Images on Facebook do not appear when using Safari on my Macbook Pro (I've tried Google Chrome too with the same result).  This makes me think it's a setting within OS Mavericks that I'm missing.  I have not seen this issue on any other computers.  This only occurs on my, and others' profile pictures on my profile page and on the news feed, not photos that are posted in albums or on walls.  and yes, i have images enabled in Safari.
    In safari the images don't appear, and in their place is a small blue "?" square >>.
    In Chrome it appears as a broken image link >>
    Has anyone encountered this?  Is there a fix?  It is very annoying.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • I get error code -8058 when attempting to copy and paste in Finder, I get error code -8058 when attempting to copy and paste in Finder

    I get "error code -8058" when attempting to copy and paste in Finder, I get error code -8058 when attempting to copy and paste in Finder. "Alt +Drag" works. Any ideas?

    Have a look at the 'More Like This' to the right - seem to be some solutions offered: >>>>>>>>>>>>>>>>>

  • Error ORA-06502 When using function REPLACE in PL/SQL

    Hi,
    I have a PL/SQL procedure which gives error 'Error ORA-06502 When using function REPLACE in PL/SQL' when the string value is quite long (I noticed this with a string 9K in length)
    variable var_a is of type CLOB
    and the assignment statement where it gives the error is
    var_a := REPLACE(var_a, '^', ''',''');
    Can anyone please help!
    Thanks

    Even then that shouldn't do so:
    SQL> select overload, position, argument_name, data_type, in_out
      2  from all_arguments
      3  where package_name = 'STANDARD'
      4  and object_name = 'LPAD'
      5  order by 1,2
      6  /
    OVERLOAD   POSITION ARGUMENT_NAME                  DATA_TYPE                      IN_OUT
    1                 0                                VARCHAR2                       OUT
    1                 1 STR1                           VARCHAR2                       IN
    1                 2 LEN                            BINARY_INTEGER                 IN
    1                 3 PAD                            VARCHAR2                       IN
    2                 0                                VARCHAR2                       OUT
    2                 1 STR1                           VARCHAR2                       IN
    2                 2 LEN                            BINARY_INTEGER                 IN
    3                 0                                CLOB                           OUT
    3                 1 STR1                           CLOB                           IN
    3                 2 LEN                            NUMBER                         IN
    3                 3 PAD                            CLOB                           IN
    4                 0                                CLOB                           OUT
    4                 1 STR1                           CLOB                           IN
    4                 2 LEN                            NUMBER                         INI wonder what happened?

  • The following error message appears when I try to create a PDF in Publisher:

    The following error message appears when I try to create a PDF in Publisher:
    PDFMaker cannot locate the Adobe PDF Printer's printer driver. Please re-install Adobe Acrobat 10.1.
    I have tried update patches to no avail.
    Can anyone please help?
    Thank you.
    Susan

    Hello Michael,
    My version of Publisher is 2010 and my OS is Windows 8.1.
    64-bit OS x64 based processor.
    I'm not too sure if this issue has arrisen when I upraded to Windows 8.1.
    My Dell printer(Dell all in one) has also stopped working due to a driver issue now not being supported.
    Thank you for taking the time to view my request.
    Kind regards,
    Susan

  • Why does an unknown  error (-42110) appear when i try to play a rental movie that has downloaded already?

    why does an unknown  error (-42110) appear when i try to play a rental movie that has downloaded already?

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Reset the Apple TV (Settings > General > Reset > Reset all settings)
    Restore the Apple TV (Settings > General > Reset > Restore)

  • Hi there , Why Do I Receive Error Code -1073807253 When Using VISA

    Error Code -1073807253

    Hi ahmed,
    you can attach picture directly in the forum...
    If you would use an error indicator you could read an explanation of the error. It's a "framing error", happening sometimes when using serial connections...
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • Get ORA-01031: insufficient privileges error, but only when using dbstart.

    I am getting ORA-01031: insufficient privileges error, but only when using dbstart. the listener starts but not the database. How come I can start it from SQL prompt but not from dbstart scripts as the oracle user?
    [oracle@mallard bin]$ ./dbstart
    Processing Database instance "gf44": log file /prod/oracle/10/startup.log
    [oracle@mallard bin]$
    Log file:
    Wed Aug 20 10:15:02 CDT 2008
    SQL*Plus: Release 10.2.0.1.0 - Production on Wed Aug 20 10:15:02 2008
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    SQL> ERROR:
    ORA-01031: insufficient privileges
    SQL> ORA-01031: insufficient privileges
    SQL>
    /prod/oracle/10/bin/dbstart: Database instance "gf44" warm started.
    >
    oratab file:
    gf44:/prod/oracle/10:Y
    dbstart file section:
    # See if it is a V6 or V7 database
    VERSION=undef
    if [ -f $ORACLE_HOME/bin/sqldba ] ; then
    SQLDBA=svrmgrl
    VERSION=`$ORACLE_HOME/bin/sqldba command=exit | awk '
    /SQL\*DBA: (Release|Version)/ {split($3, V, ".") ;
          print V[1]}'`
    case $VERSION in
    "6") ;;
    *) VERSION="internal" ;;
    esac
    else
    if [ -f $ORACLE_HOME/bin/svrmgrl ] ; then
    SQLDBA=svrmgrl
    VERSION="internal"
    else
    SQLDBA="sqlplus /nolog"
    fi
    fi
    Permissions of file:
    [oracle@mallard bin]$ ls -la dbstart
    -rwxrwxr-x 1 oracle oinstall 10407 Aug 19 12:27 dbstart
    [oracle@mallard bin]$
    User permissions:
    [root@mallard 10]# id oracle
    uid=503(oracle) gid=503(oinstall) groups=503(oinstall),504(dba)
    [root@mallard 10]#
    I can start the listener manually using "./lsnrctl start" and start the database manually from sql prompt using "SQL>startup" (as sysdba) with no problems. this only happens when using dbstart file. I am logged in as oracle user and all environment variables are set
    Thank you for any help you could provide.

    I have the same problem, but i don't want insert this string
    Connect sys/{password} as sysdbaI have deployed an Oracle 10g with os SunOS
    $ uname -a
    SunOS DB02 5.10 Generic_141444-09 sun4v sparc SUNW,Sun-Blade-T6320
    I can connect with sys/password, but I can't login with
    $ sqlplus /nolog
    SQL*Plus: Release 10.2.0.1.0 - Production on Thu Jan 7 15:19:50 2010
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    SQL> connect / as sysdba
    ERROR:
    ORA-01031: insufficient privilegesthe the startup and dbshut don't work.
    Someone maybe help me?
    Thanks,
    Regards.
    Lain

  • What is the best way to display errors to users when using JSPs?

              Hello,
              Could someone suggest me the best way to display errors to users when using JSPs?
              Many thanks in advance.
              Rino
              

              Thanks for the code snippet!
              Rino
              "Deepak Vohra" <[email protected]> wrote:
              >
              >
              >The 'errorPage' attribute of the 'page' directive forwards uncaught run-time
              >exceptions
              >to an error processing page. For example:
              >
              ><%@ page errorPage="error.jsp" %>
              >
              >redirects the browser to the JSP page error.jsp if an uncaught exception
              >is encountered.
              >
              >
              >Within error.jsp, indicate that it is an error-processing page, via the
              >directive:
              >
              >
              >
              ><%@ page isErrorPage="true" %>
              >
              >The Throwable object describing the exception may be accessed within
              >the error
              >page via the 'exception' implicit object.
              >
              >
              ><% if (exception != null) { %>
              ><p> An exception was thrown: <b> <%= exception %>
              >
              ><p> With the following stack trace:
              ><pre>
              >
              ><%
              > ByteArrayOutputStream ostr = new ByteArrayOutputStream();
              > exception.printStackTrace(new PrintStream(ostr));
              > out.print(ostr);
              >%>
              ></pre>
              >
              >
              >
              >"Rino Srivastava" <[email protected]> wrote:
              >>
              >>Hello,
              >>
              >>Could someone suggest me the best way to display errors to users when
              >>using JSPs?
              >>
              >>Many thanks in advance.
              >>
              >>Rino
              >
              

  • Apple Logo Screen (turn on screen) suddenly appear when using

    Apple Logo Screen (turn on screen) suddenly appear when using my iPad Mini Retina, but every thing goes back to normal after. It happens like few times since I bought my iPad since December. My OS is ISO7.0.4

    The iPad basically re-booted.
    Eveytime it re-boot, take note of what app you are running. You need to find out what is causing the re-boot.

Maybe you are looking for