Error -1074397163 at IMAQ inti for USB camera

I plan to use labview to control a Thorlabs DCC1545M camera. Firstly I want to snap a picture or grab pictures. When I run my program, it show me Error -1074397163 occurred at IMAQ at Snap.vi or at IMAQ Grab Setup.vi. It seems the error come from the subvi IMAQ Init.vi whicn is include in both Snap and Grab Setup vi. When the program run at imgInterfaceOpen.vi under the IMAQ Init.vi, it retrue a number --1074397163 form the return parameter:return type. This is the situation I got.
The interesting thing is that I could run the similar program successly if I replace the all IMAQ by IMAQdx. It is because my camera is a directshow camera which can not connect by IMAQ? Can I use the IMAQ to snap picture not IMAQdx, What should I do? Thank you so much

First of all you need to check this.
And if you have any issue with the Direct Show cameras you need to look at this.
=========================================
Please remember to accept a solutions and show your appreciation by giving Kudos to helpful messages...
Mangesh D.
CLAD | Project Engineer
==
VIPM, LabVIEW 8.2, 2009, 2011SP1, 2012, 2012SP1, 2013, cRIO,cDAQ, PXI, ELVIS, Multisim, Smart Camera....

Similar Messages

  • IMAQ for USB cameras error -1074396024 system error

    Hi,
    I used a IMAQ for usb cameras.vi. It works well in my laptop which is a newer one. Well, when I changed to an old one computer and ran it, the error shows that system error, i.e. -1074396024. Could you tell me what it means and how to fix it?
    Thanks.

    Hi, 
    I tried to use MAX to configure the Dazzle card, see the attached file. It says that it does not have any video mode which is supported. Our camcorder has the analog signal output. Is it due to the camcorder problem or this Dazzle USB converter problem? Thanks.
    In addition, I am wondering if this IMAQdx can configure this camcorder from the error.
    Attachments:
    error2.jpg ‏112 KB

  • Cant install NI-IMAQ for USB Cameras

    i tried to install NI-IMAQ for USB Cameras.but it cant get it to install its giving the error need higher version than 7.0 but i am using 8.0 .also it is saying that it needs vision 7.0 ........??wat are these error ..how can i get it install ????????help
    thx
    Regards

    nolsqn,
    Can you clarify what you have installed? You must have all of the following installed to get NI IMAQ for USB Cameras to install:
    System Requirements:
    - Windows 2000/XP (English,
    Italian, Japanese, French, Italian, Norwegian, Dutch,
    Spanish/Portuguese, Russian, and simple Chinese)
    - LabVIEW 7.0 or higher with NI Vision 7.1 or higher for the USB LabVIEW support
    - Vision Assistant 7.1 or higher for the USB Vision Assistant plugin module
    - Vision Assistant 8.0 or higher for the USB Express VI
    It sounds like you are missing Vision Development Module (this is what is referred to as NI Vision)? Is this true?
    --Michelle
    Instrument Control R&D
    National Instruments
    Instrument Control
    Machine Vision

  • From Analog CCD to NI-IMAQ for USB Cameras?

    I installed the NI-IMAQ for USB Cameras to obtain video feed from a SONY CCD camera in real-time. This camera only has the S-Video analog output so I used a Plextor PX-TV100U A/D converter to transform this signal to USB feed. It worked at first but after running my Vision VIs a couple of times NI-IMAQ could no longer establish a connection with the camera. And as I shut down my LabView 8.5, the whole computer rebooted automatically. The error messages from LabView 8.5 varied from "Not able to establish a connection to the camera... might be in use" to "No video driver installed...". None of it made any sense because the VI worked sometimes without errors. And the same thing happened to all three computers in my research lab at Tufts University.
    I realize that my camera is going through a signal conversion before the USB, but why would NI-IMAQ for USB Cameras crash the whole computer? Also, is there a way to control my camera shutter speed from NI-IMAQ? I thought perhaps the camera wasn't setup right for the image acquisition. Help!!

    Hi HTL,
    IMAQ for USB only works with cameras that are DirectX compatible.  Can you be sure that the information coming out of the A/D converter is compatible?  Also, when you say "it worked at first" what exactly do you mean?  Were you able to do image processing on images brought in via the camera?  If you had Measurement and Automation Explorer (MAX) open and the camera selected at the time you tried to run a program that called the camera, you should get an error like you saw (Not able to establish connection).
    Wes P
    Applications Engineer
    National Instruments
    Wes P
    Certified LabVIEW Developer

  • Download NI-IMAQ for usb cameras

    where can i get the NI-IMAQ for USB cameras???
    i woul like to download this application for my registered product

    Can be taken from External link . 
    I copied this link from this thread:
    http://forums.ni.com/ni/board/message?board.id=170&message.id=154541&requireLogin=False
    Regards, Guenter

  • Support for USB cameras in VBAI?

    NI have a free driver that allows Vision 7.1 to access USB 2 cameras. Is there anything similar available for VBAI that would allow me to use an industrial USB 2.0 camera?

    The free NI-IMAQ for USB Cameras driver is meant to support simple USB webcams that use DirectShow.  For machine vision or scientific imaging applications, most USB cameras don't have the performance or the features needed, like triggering.  The primary "customer" for the free driver has been universities that use webcams in labs.
    With that said, there are a few industrial USB cameras out there that can be used for machine vision.  The problem is tha there is no industrial USB camera standard that covers them all (like there is with FireWire), so companies like National Instruments would have to provide and support different drivers and software tools for every indutrial USB camera. 
    A better solution is IEEE 1394 (or FireWire).  They offer the same performance as USB 2.0 cameras and are around the same price.  On top of that, almost every large industrial camera manufacture has a line of industrial FireWire cameras (including Sony, Basler, FLIR, and Cohu), and they all conform to the same DCAM (or IIDC) standard.  WIth this standard, our one driver, NI-IMAQ for IEEE 1394 Cameras, works with all of them.
    Vision Builder AI is designed to solve machine vision applications without programming, while USB cameras usually don't provide the triggering or advanced modes necessary for machine vision.  Because machine vision and USB cameras don't usually go together, we didn't provide support for USB cameras within Vision Builder AI.  My question to you, another_novice, is why would you like to use a USB camera with Vision Builder AI?  Are there particular features in a certain USB camera that you can't find in other cameras?  I would really like to know so we can get a better picture of how our customers are using our products.
    Thank you.
    KyleV.

  • I just found an error in the file name for my Camera Raw Cache file.  How do I correct it?

    I just found an error in the file name for my camera raw cache file.  The error is in my username.  I don't know how to correct the error or if I should just leave it.  I'm not sure where my cache file is stored on my computer.  Any help would be appreciated.
    Thank you

    Since you are on a Mac if when you first set up your account you left out the i in Wilson nothing you do will change that. The REAL account name will always be alicewlson. Once an account is created you can't actually change the name of it. You can change the name that is displayed but not the REAL account name.
    Simplest thing to do is stop worrying about it. Everything is as it should be, that is except Wilson being spelled without the i.
    Lilac50 wrote:
    When I searched finder for "alicewlson" I found a long list of files like this:
    2014-07-22 12.50/File005.nef[15:16:35.212] (debug) src/ImageLoader.cpp:363: File: /Users/alicewlson/Recovered/2014-07-22 12.50/File002.nef[15:18:02.173] (debug) src/StoreXMLFile.cpp:21: /Users/alicewlson//.rpro/rpro.cfg
    I believe I made the error in my user name when I first got my computer a year ago. I then corrected it under my user name but not in my Lightroom files. I also looked for files with a .lrdata extension and didn't find any.

  • Which is better for usb camera between VISA and imaqdx in labview 2010?

    i have done a program for usb camera to acquire images with imaqdx.
    now i want to know which is better between VISA and  imaqdx in labview 2010?
    i didn't study visa before
    thans for help.

    VISA is primarily used to communicate with instruments via GPIB/TCP-IP/Serial/USB. In order to use easily VISA with an instrument over USB the instrument must adhere to the USBTMC spec. A camera is not likely to have this. Otherwise you have to use USB RAW, and that requires detailed knowledge of the data that is transmitted by the instrument. Manufacturers rarely give this information out. Normally they will provide a DLL to communicate with the instrument.
    Thus, in your case, VISA is not going to be an appropriate API to use for a USB camera.
    Out of curiosity, what prompted this question?

  • Driver For USB camera Error

    Hi,
    i am using a USB camera and wish to write a VI to Grab Real Time Image. I used the sample Grab program provided by the IMAQ-USB camera manual.
    I got this error that says camera not connected. But my camera works fine with Vision Assistant. Any idea what causes this error?

    VGA CD-ROM, can you give me the exact model of the Creative live Camera.
    Can you give me the link of the camera? that would be better.
    I found this.
    I wonder if this is any good.
    http://www.everythingusb.com/creative_live!_cam_optia.html
    Best regards,
    Krispiekream

  • 不能使用 IMAQ for USB Camera

    我安裝 labview 8.5 + Vision development 8.2 + Imaq for USB
    但安裝完了以後並沒有在 labview 裡面看到 usb 的相關元件
    請問是版本上的問題嗎??
    謝謝

    謝謝二樓, 我的確使用這個網站抓的軟體
    - LabVIEW 7.0 or later.    ---> 我的是 8.5
    - Vision Development Module 7.1 or later -->  我的是 8.2
    - NI Vision Acquisition Software 7.1 or later, for USB LabVIEW support. --> 我的是 8.5.1
    - Vision Assistant 7.1 or later, for  USB Vision Assistant plug-in module support. --> 有
    - Vision Assistant 8.0 or later, for USB Express VI support. --> 有
    請問還有哪方面有問題呢
    謝謝

  • Ichat support in 10.4.10 for USB cameras?

    With apple not selling isight cameras anymore i was told that you couldnt use a USB based Camera with ichat Ilife etc. However I was in the Apple store yesterday and one of the
    Genius said he thought that was fixed in 10.4.10?? can anyone help me with this. i want to use an Apple display with a Mac Pro and i need a good camera to attach via USB.

    Hello alangsam
    A few apps, including iMovie, require a Firewire DV signal from any external webcam. No external USB cam works with such apps.
    If you need to use your external webcam with iMovie (or other apps that demand Firewire input), use a Firewire webcam or your compatible DV camcorder rather than a USB cam.
    A 10.4.10-equipped Mac can use UVC (the latest USB specification) webcams for all other apps. If you buy USB, be sure to get a camera that supports the UVC standard. Older, non-UVC USB cams might work if appropriate driver software is available, but the UVC cams are supported by the latest Mac OS without additional software. See the system requirements for the application software you want to use for exact camera and, if applicable, additional software requirements.
    For more info, see this post about Webcams other than iSight or search iSight Discussions for "UVC" (without the quotation marks.)
    EZ Jim
    PowerBook 1.67 GHz   Mac OS X (10.4.10)    G5 DP 1.8  External iSight

  • Bypass webcam for usb cam

    How do I bypass my webcam(built in) on intel mac, for a usb cam?
    Message was edited by: andrewsangst11

    Hello,
    The link given to you by smecurio_fc on the duplicate post is a very good starting point for your application.  Please try to avoid multiple postings on the same topic.
    Regards,
    Clint M
    National Instruments

  • NI-IMAQ for USB 1.1.1 will not install with LV8 and Vision 8.0 or 8.21

    When I try to install NI-IMAQ for USB 1.1.1 I get a message that vision 7.1 or higher with  Labview 7.0 or higher;  or Vision Assistant 7.1 or higher is required, I have tried the vision 8.0  and vision 8.2.1 packs with Labview 8.0 with no success.

    Hello mcg,
    I am not familiar with NI-IMAQ for USB 1.1.1.  The newest version I know of that we have is 1.0 at the following link:
    NI-IMAQ for USB Cameras 1.0
    You are correct that you need LabVIEW 8.0 and Vision 8.0 installed.  After this you should be able to install this very simply.  If that's still giving you trouble, try repairing LabVIEW and repairing Vision (Start » Control Panel » Add or Remove Programs » National Instruments Software » LabVIEW or Vision » Repair).
    Please let us know if you have any more trouble on this.  Please post a screenshot of the error as well.
    Regards,
    Luke H

  • How to download ni imaq usb camera driver

    sir
     i wants to download ni imaq for usb camera driver but i am unable to download it from specified position given in website . please tell me how i can download this software or there is any other link for downloading it.
    this is adrees from where i was trying tom download it.
    ftp://ftp.ni.com/pub/devzone/epd/ni_imaq_usb_insta​ller_86.exe
    please tell methat what is the problem.
    mpsingh

    The link you gave in your post is working form me. Maybe a firewall which can be located local or in your company network is blocking FTP downloads or downloads of files of type exe.
    Waldemar
    Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
    Don't forget to give Kudos to good answers and/or questions

  • IMAQ for USB 0xBFF60488 エラー

    WindowsXP(SP2)
    USB2.0カメラ
    Vision Developer
    IMAQ for USB
    という構成で稀に添付のエラーになる場合があります。
    「最小値は０以上である必要があります。」
    との言葉について思い当たるパラメータはありません。
    このエラーの意味と回避策を教えてください。
    添付:
    IMAQUSBErrorDialog.JPG ‏16 KB

    VBAI様
    平素よりNI製品をご利用いただきまして誠に有難うございます。
    日本ナショナルインスツルメンツ　技術部河野です。
    ご使用のOSの言語は日本語でしょうか。
    NI-IMAQ for USB cameraはOSの言語が英語のみに対応しており、英語以外のOSで動作した場合
    表題のエラーが発生する事例が報告されております。
    この問題については下記Discussions Forumのスレッドで取り上げられています。
    Discussions Forum - USB DRIVER FOR IMAQ
    http://forums.ni.com/ni/board/message?board.id=170&thread.id=154541&view=by_date_ascending&page=1
    回避策ですが、日本語版OSに対応したパッチがリリースされており、これを使用すれば問題が回避される可能性がございます。
    以下リンクよりパッチをダウンロードして頂けますので、一度お試し頂ければと思います。
    USBタイプのカメラを使用して、画像集録する方法
    http://digital.ni.com/public.nsf/allkb/B68A2D48C69E7EF2862570410044C777
    以上、ご不明な点ございましたら再度ご連絡頂ければと存じます。
    宜しくお願いいたします。
    日本ナショナルインスツルメンツ株式会社
    技術部　河野　結花
    TEL: 0120-527196
    弊社のサポートに関する情報は以下のサイトをご覧ください。
    http://www.ni.com/support/ja/

Maybe you are looking for