Error 1075: The Dependency service does not exist.........

Hi All,
I am unable to start Hyperion Foundation Shared Services-Web Application
The Error Was
Could not start the Hyperion Foundation Shared Services-Web Application service on local computer.
Error1075: The Dependency service does not exist or has been marked for deletion.
Thanks !!!
Krishna

Hi Krishna,
Please see the thread: Re: Open LDAP service marked for delete
Regards,
-John

Similar Messages

Error 1075: The dependency service does not exist or has been marked for deletion

Windows 7 Pro laptop will not connect to corporate domain. Multiple identical twin laptops have no problem.
Best suggestion so far has been to leave the domain and rejoin it, BUT the relevant buttons are grayed out and the comment says "Note: The identification of the computer cannot be changed because:- The Workstation service is not running. Open the Services
snap-in (services.msc) to ensure it is running and set its Startup Type as "Automatic"."
In services.msc the Workstation service is already set to Automatic but is not started. When I try to start it manually the response is "Windows could not start the Workstation service on Local Computer." and then "Error 1075: The dependency service does
not exist or has been marked for deletion."
Rebooting gets me nowhere.
In all other respects that laptop appears fine and can connect to the Internet, but NOT to the network. I have brought it and a twin laptop home to try on my domestic network and get the same results.
Any ideas, please?

Hi,
Let us go to services.msc and navigate to Network Store Interface Service. Please check whether this service has been set to Automatic and turned on.
Kim Zhou
TechNet Community Support

Check Point VPN-1 Securemote service causes Error 1075: The dependency service does not exist or has been marked for deletion

Has anyone ever managed to solve this one?
We have a problem on Windows 7 SP1 32bit systems.
when we try to start the Check Point VPN-1 Securemote service we get this message:
Error 1075: The dependency service does not exist or has been marked for deletion
When we install a clean Windows 7 from an ISO the checkpoint client without any issues
when we use the same Windows Setup source and install it from SCCM TS - the CheckPoint client doesn't start
the client we're installing is : CP_SeucRemoteSecureClient_NGX_R30_HFA3
which is supported for Win7 x86
other than that there are no special prerequisites for the CheckPoint client. therefore we know the problem is local :/
we tried to isolate and minimize the cause of the issues by trying to see the differences between a clean installation from ISO and a clean installation from SCCM
We know for sure the problem is not from SCCM Client, Programs and Features, Updates, Group Policy
it seems like the configuration is the same but we can't seem to find any online solution about this issue
any suggestions?
thanks
Tamir Levy
Tamir Levy

Hi,
Please check if all the dependencies services are running, if not, please start them:
DNS Server
Remote Procedure Call (RPC)
Netlogon
Server
Workstation
Any error message, please post back.
You can also check solution in this article:
http://support.microsoft.com/kb/269375
Hope these could be helpful.
Kate Li
TechNet Community Support

PowerPivot - SP2013 - Cannot create the service instance because the parent Service does not exist

Unable to setup PowerPivot using PowerPivot configuration tool.
I have One server which has SQL 2012 SP1 and SP2013.
The farm is configured with all service applications.
SQL has default instance with DB Engine and SSAS Tabular. Reporting Services has been configured using SharePoint mode and has a service application.
The Power Pivot instance is set up with DB Engine and the SSAS.
I keep getting this error. Ive tried so many times uninstalling, making sure features removed, rebuilding the farm (thank god for autospinstaller..)
11/07/13 12:06:17:6858 Verbose: CreateSystemServiceInstance.NeedsExecute
11/07/13 12:06:17:6858 Verbose: Running function IsFarmConfigured to check whether SharePoint is configured regardless of availability
11/07/13 12:06:17:6858 Verbose: Farm is configured
11/07/13 12:06:17:6858 Verbose: Entering function GetService(Guid)
11/07/13 12:06:17:6868 Verbose: Service is not installed.
11/07/13 12:06:17:6868 Verbose: Service instance not found in local server.
11/07/13 12:06:17:6868 Verbose: CreateSystemServiceInstance.NeedsExecute(True)
11/07/13 12:06:17:6868 Verbose: CreateSystemServiceInstance.CanExecute
11/07/13 12:06:17:6868 Verbose: CreateSystemServiceInstance.CanExecute(True)
11/07/13 12:07:41:5662 Verbose: CreateSystemServiceInstance.Execute
11/07/13 12:07:41:5682 Verbose: Entering function GetService(Guid)
11/07/13 12:07:41:5702 Verbose: Service is not installed.
11/07/13 12:07:41:5702 Verbose: CreateSystemServiceInstance.Execute(Skipped)
11/07/13 12:07:41:5702 High: Cannot create the service instance because the parent Service does not exist.
11/07/13 12:07:41:5702 High: Prerequisites check for execution failed. Farm is not in a valid state.

Did you install the PowerPivot add-in for SharePoint? There are 2 parts to this - the SQL Server Power Pivot for SharePoint which is the Analysis Services instance running in Tabular Mode and the PowerPivot Add-in. The last line in your error message seems
to tell you that you have a missing component in the farm, possibly the PowerPivot Add-in
Edwin Sarmiento SQL Server MVP | Microsoft Certified Master
Blog |
Twitter | LinkedIn
SQL Server High Availability and Disaster Recover Deep Dive Course

Help me soon please: error:1065 the database specified does not exist.

hello every one,
when i start the computer the concurrent manager service not started , when i try to start it i have this problem:
"could not start the oracle concmgrvis_orabac service on local computer error:1065 the database specified does not exist."
i restarted computer and tried to stop and start all services more times but no change.
i hope if you can help meplease soon.

check note How to Recreate the Concurrent Manager Service for Oracle Applications 11i on Windows NT
Note:152887.1
maybe recreting the CM will solve your issue
Follow these steps to recreate the concurrent manager service on Windows NT:
1. cd $APPL_TOP
2. dos> envshell.cmd (this opens up a new DOS window. Go to that window and
do the following).
3. cd $COMMON_TOP/admin/install
4. dos> adsvcm.cmd -deinstall (deinstalls the ccm service)
should exit with status '0'
5. dos> adsvcm.cmd
should exit with status '0'
Should see "Successfully installed concurrent manager"
6. Reboot
fadi
.

Error 1065 The database specified does not exist

Hi All,
When I am trying the start the Concurrent Manager [[From Services.msc]] I am getting this error.
Error 1065 The database specified does not exist
I am also not able to connect through SQL* Plus.
Thanks
--Anil

Hi,
Thanks to both of you. I don't have metalink access right now.
Hussein
It's my Desktop. For quite sometime I have not run it and Now when I am opening the Apps I am not able to login.
Also I don't have much idea where to check the CM log file????
Thanks
--Anil

Error MSB4057: The target "PlatformPrepareForBuild" does not exist in the project._

Hi to all,
I tried to compile my .sln with VS2010 but I had this error.
error MSB4057: The target "PlatformPrepareForBuild" does not exist in the project.
It occurs only compiling with win32 configuration but not with x64 one.
Ideas?
Thank you in advanced

In which version of Visual Studio did you create this solution? And What type of the project in this solution? And could you please post the proj file here?
If this solution is created in VS2012 or VS2013, please make sure the original solution is not corrupt, it can be opened and built successfully in the corresponding Visual Studio. For probable compatibility issues, you could check the documents here:
Visual Studio 2012 Compatibility
Visual Studio 2013 Compatibility
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error 30502: The folder ID does not exist

When I use the Category and Perspective drop down select boxes on
the navigation bar, I receive an error message: "Error 30502: The
folder ID does not exist.
I have checked. I do not have any invalid packages.
Any ideas?

Pls try posting in Portal > Content Area forum.

Migration errors - Dependent DT does not exist

Hi,
Doing some application migrations from 2012 SP1 to R2...
A handful, around 2% are failing with the following error:
"Provider Exception: Dependent DT does not exist"
Anyone experienced this before?

Migration is officially only supported when using the same version as source and destination hierarchy:
http://technet.microsoft.com/en-us/library/gg699364.aspx#BKMK_MigrationScenarios
Torsten Meringer | http://www.mssccmfaq.de

The requested dashboard does not exist

Dear Expert,
Am using SAP 8.8 PL18, on windows 7.
getting below error.
The requested dashboard does not exist.
Dashboard:/ com.sap.b1.dashboards/0010000101.SAP_DASHBOARD_001.DAB001/default.html
Thanks
Kevin

Kevin:
That error is fixed like this..
From Integration Framework Page
SLD >> [DB Work] >> JDBC Section
URL: edit
on the databaseName put your DB COMMON
databaseName=SBO_COMMON
Save.
Restart Services.
REGARDS.
Christian

The name "Folder" does not exist in the namespace

I am trying to learn Wpf and doing some of the examples on the Microsoft site. https://msdn.microsoft.com/en-us/library/vstudio/bb546972(v=vs.110).aspx?cs-save-lang=1&cs-lang=vb#code-snippet-1
I am using Visual studio 2013. As I work through the example I am getting the following error.
Error 1
The name "Folder" does not exist in the namespace "clr-namespace:FolderExplorer".
c:\users\hbrown\documents\visual studio 2013\Projects\FolderExplorer\FolderExplorer\MainWindow.xaml
11 17
FolderExplorer
Error 2
The name "Folder" does not exist in the namespace "clr-namespace:FolderExplorer".
c:\users\hbrown\documents\visual studio 2013\Projects\FolderExplorer\FolderExplorer\MainWindow.xaml
16 7
FolderExplorer
Here is the code:
<Window x:Class="MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:my="clr-namespace:FolderExplorer"
Title="Folder Explorer" Height="350" Width="525">
<Window.Resources>
<ObjectDataProvider x:Key="RootFolderDataProvider" >
<ObjectDataProvider.ObjectInstance>
<my:Folder FullPath="C:\"/>
</ObjectDataProvider.ObjectInstance>
</ObjectDataProvider>
<HierarchicalDataTemplate
DataType = "{x:Type my:Folder}"
ItemsSource = "{Binding Path=SubFolders}">
<TextBlock Text="{Binding Path=Name}" />
</HierarchicalDataTemplate>
</Window.Resources>
I have a class file named Folder.vb with this code.
Public Class Folder
Private _folder As DirectoryInfo
Private _subFolders As ObservableCollection(Of Folder)
Private _files As ObservableCollection(Of FileInfo)
Public Sub New()
Me.FullPath = "c:\"
End Sub 'New
Public ReadOnly Property Name() As String
Get
Return Me._folder.Name
End Get
End Property
Public Property FullPath() As String
Get
Return Me._folder.FullName
End Get
Set(value As String)
If Directory.Exists(value) Then
Me._folder = New DirectoryInfo(value)
Else
Throw New ArgumentException("must exist", "fullPath")
End If
End Set
End Property
ReadOnly Property Files() As ObservableCollection(Of FileInfo)
Get
If Me._files Is Nothing Then
Me._files = New ObservableCollection(Of FileInfo)
Dim fi As FileInfo() = Me._folder.GetFiles()
Dim i As Integer
For i = 0 To fi.Length - 1
Me._files.Add(fi(i))
Next i
End If
Return Me._files
End Get
End Property
ReadOnly Property SubFolders() As ObservableCollection(Of Folder)
Get
If Me._subFolders Is Nothing Then
Try
Me._subFolders = New ObservableCollection(Of Folder)
Dim di As DirectoryInfo() = Me._folder.GetDirectories()
Dim i As Integer
For i = 0 To di.Length - 1
Dim newFolder As New Folder()
newFolder.FullPath = di(i).FullName
Me._subFolders.Add(newFolder)
Next i
Catch ex As Exception
System.Diagnostics.Trace.WriteLine(ex.Message)
End Try
End If
Return Me._subFolders
End Get
End Property
End Class
Can someone explain what is happening.
Thanks Hal

Did you try to build the application (Project->Build in Visual Studio) ? If the error doesn't go away then and you have no other compilation errors (if you do you need to fix these first), you should replace "FolderExplorer" with the namespace
in which the Folder class resides. If you haven't explicitly declared a namespace, you will find the name of the default namespace under Project->Properties->Root namespace. Copy the value from this text box to your XAML:
xmlns:my="clr-namespace:FolderExplorer"
The default namespace is usually the same as the name of the application by default so if your application is called "FolderExplorer" you should be able to build it.
If you cannot make it work then please upload a reproducable sample of your issue to OneDrive and post the link to it here for further help.
Please remember to close your threads by marking helpful posts as answer and then start a new thread if you have a new question.

The kind infoobject does not exist in the CMS

hi, all of a sudden, when i import a new biar file to the server, i got the below error message:
the kind infoobject does not exist in the CMS
the server worked fine before. and then i imported the biar to another server, it works fine, and seems not the biar problem.
then i found some error explanation
Cause
The InfoObject type does not exist in the CMS
Action
Ensure that the InfoObject type is propertly installed.
and
Cause
An InfoObject type is missing.
Action
Ensure that the XSD for this type of InfoObject is installed.
I want to know how to reinstall the infoObject type.
or any other idear on this.
thanks all.
Ada

WHat's the exact version of the source and the target BO system?
Regards,
Sratos

The target "GetTargetPath" does not exist

Hi the following error occurs when i build a solution containing my VSPackage project and a windowsApplication.
Error 1 The target "GetTargetPath" does not exist in the project. MyLibrary18.mlproj WindowsApplication1
Please help
Thanks
kajal

Hi,
I solved it myself.
in the custom project file the following line is required to compile the project and have referenced too as a project reference:-
<Import Project="$(MSBuildBinPath)\Microsoft.Common.targets" />
Thanks
Kajal

SCCM 2012 R2 reporting error: "The DefaultValue expression for the report parameter 'UserTokenSIDs' contains an error: A specified logon session does not exist. It may already have been terminated. (rsRuntimeErrorInExpression)"

Hi,
I have two SCCM environments under same active directory domain and one service account have been used for SCCM configurations on both the environments (QA and PRODUCTION). I am facing similar error as mentioned above while trying to fetch reports on
PRODUCTION site, but the QA site is working fine, though same service account have been used for configuring both. While looking at the reportserverservice_<date> log on my Production DB server i see the following error
"processing!ReportServer_0-3!2124!01/02/2015-09:09:30:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: , Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during
report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the dataset DataSet1. ---> System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Override
Default' to data type int."
My DB and SCCM primary site are different and the reorting services point is installed on remote DB server. Please help me resolving the issue.
Troubleshooting performed:
1.Disabled the registry key 'EnableRbacReporting' from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP to 0 and then restarted SSRS service and the reporting worked for some minutes after that the registry key reverted back to 1 automatically and
reporting started throwing errors again.
2. Checked with the permissions on DB whether or not 'sysadmin' role is assigned to the SCCM service account.
3. re-registered the SQL management Provider WMI class.
mofcomp.exe “C:\Program Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”

Hi All,
Finally found exact solution to the reporting error.
Error: while launching SCCM reports (both from Console and web based) an unexpected error occured with error message as "The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist.
It may already have been terminated. (rsRuntimeErrorInExpression)"
Solution: This is password replication issue for the domain account used to configure reporting services point in SCCM. If your SQL SSRS reporting services instance and databse runs with local default account whereas the reporting services point on SCCM
primary site is configured with domain account, (As in My case) you need to perform the following in order to get rid of the error.
Launch 'Reporting Services Configuration Manager' from the SQL SSRS box(either Local or Remote), Connect to Report Server Instance->Go to 'Execution Account' tab->Specify the 'Execution Account' as domain account and password which is used to configure
Reporting Services Point in SCCM Primary Site, and then click apply.
Now Lauch the report either way (Web based or from Console), the error will disappear and all your default reports will execute perfectly as before.

Error: The plugin -65221 does not exist in the CMS

Hi,
I uploaded my Crystal Reports in the Business Objects InfoView. I can schedule them using the Schedule link but when I use the Reschedule link in the History and click on the paramater value, I' getting the following error:
An error has occurred: The plugin -65221 does not exist in the CMS
Did I miss a configuration? The source of the Crystal Report is a direct connection to the Oracle database. I also configured the Username and Password connection in the Business View tool.
Thanks!

Hi,
I am not sure but I assume that the error has to do with the business views. Some component was not available in your repository and it was created when you imported the report using the CR Designer.
It may also be the case that this error has been corrected in a newer service pack (SP5 is the latest SP for BOBJ XI R2) To be honest I could not match your case to any of the the corrections contained in SP4 and SP5 but this does not mean that the issue is not corrected.
Regards,
Stratos

Error 1075: The Dependency service does not exist.........

Similar Messages

Maybe you are looking for