Error -10810 AND Keyboard Not Responsive

Hello, within the past week my keyboard has been freezing randomly and finder will not open any applications. I've tried reparing the disk and permisions, but disk utility says the "Macintosh HD Apears to be OK".
I've tried using terminal when the finder is not frozen, but the terminal will say "-bash process fork" and then "process completed". Also, if I open up another terminal window, the terminal just displays "Could not open a new pseudo-tty."
Also, any applications that are open run normal and the finder is not frozen (I can still navigate and search), but it will not open any NEW applications.
All help is greatly appreciated,
Thank you

One more thing, this problem only occurs on my account. When logged in on the guest account, I experience no issues. Just to test this, I also created another administrator account, and I also have not run into this problem.
Thanks Again

Similar Messages

  • Keyboard not responsive in Win8.1 Login Screen (Normal/Sa​fe mode)

    Dear all professional in HP technical support team, 
    I had conduct upgrade from Window 8 to Window 8.1 last month, it work well without any problem until 4 days ago, the PC cannot start and stuck in HP logo and keep looping for 2 hours.
    Then I try to boot in to Recovery mode, conduct dozens of Chkdsk command (chkdsk c: /R /X), turnout all bad sectors has been allocated and the Window finally can boot in to login screen.  
    However, I am unable to login to desktop since the USB HP wireless keyboard is not responsive, the USB HP wireless mouse work fine, and I am unable to activate 'On-screen Keyboard', I was manage to boot into safe mode, but it turnout the same, because the keyboard not responsive, I cannot input the password and login to both Normal and Safe mode.
    I had try to attach a USB wired keyboard and USB wired mouse as well, it turnout the same, mouse is working and keyboard is not responsive.
    The mouse and keyboard are working both recovery mode and BIOS environment.  
    Othe than Reset the PC, please advise is there anyway I can login to the desktop again, or I need to manually re-install the USB wireless keyboard driver from command prompt in Recovery mode.
    Thanks for you help in advance.
    Best Regard.
    Bruch

    Hi again Bruch2168,
    Thank you for the quick reply!
    Since you are not able to return to a previous restore point in recovery mode, I recommend returning your system back to a previous restore point. This can be done by following the steps in this document on Using Microsoft System Restore (Windows 8).
    Should the problem continue, I suggest performing a backup and recovery of your operating system. This can be done by following the steps in this resource on Backing Up Your Files (Windows 8), as well as Performing an HP system recovery (Windows 8). This should return your system back to factory defaults.
    If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assis​t.html
    I hope this helps!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • I am trying to update my software through the app store but for some reason an error occurs and will not allow me to do so

    I am trying to update my software through the app store but for some reason an error occurs and will not allow me to do so. And when i go online to log into my apple id account it states that there is an error. Can someone help me solve this issue, its annoying me?

    Apple’s having trouble with the iTunes Store servers right now. Wait for them to resolve the issue.
    (123935)

  • I tried synching my 2nd generation ipod touch and it told me to update the software. Then it said "error 37" and could not complete updating but it has left me with an ipod that is not recognised by my pc and wont turn on or anything- just black

    I tried synching my 2nd generation ipod touch and it told me to update the software. Then it said "error 37" and could not complete updating but it has left me with an ipod that is not recognised by my pc and wont turn on or anything- just black

    Error 20, 21, 34, 37: These errors typically occur when security software interferes with the restore and update process. If you are using a PC, follow this article to resolve this issue.
    Above from:
    http://support.apple.com/kb/TS3694
    You also may have to place the iPod in recovery mode. For how see:
    iPhone and iPod touch: Unable to update or restore

  • I have a 1654 error code and is not listed....what do I do?

    i have a 1654 error code and is not listed. what do I do?

    Try disabling the Ask Toolbar extension.

  • TS2570 startup itunes get runtime error R6034 and then not correctly installed ERROR 7 (windows error 1114).

    startup itunes get runtime error R6034 and then not correctly installed ERROR 7 (windows error 1114).

    ChrisJ4203 wrote:
    Use this support document to remove iTunes and reinstall it on the computer. Follow the directions exactly. http://support.apple.com/kb/HT1923
    Chris,
    This absolutely solved the problem !!!!!!!!!!!!!!!!!!!!!   I was having the exact same error messages as Mike.
    Thank You for the great fix and I did not lose one song file!!!!!!!!!!!!
    G

  • Im getting error 16 and do not have adobe pcd, what can i do??

    im getting error 16 and do not have adobe pcd, what can i do??

    Error 16 http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html
    -including DW039 https://forums.adobe.com/thread/1500609

  • .. If the app is – in or out of background - (if in background NOT the first app) and the  device locked – when you get a push message and DO NOT response straight away. Later  unlock, click the app icon (which will have a badge on it) and it fails.

    .. If the app is – in or out of background - (if in background NOT the first app) and the  device locked – when you get a push message and DO NOT response straight away. let it fade off then, Later unlock, click the app icon (which will have a badge on it) and it fails to pop up my internal alert box and my notification message is gone(cannot get access to it in code).. other times it works . Including if you tap the messaeg from app centre. (this is all on a iPod 5.1.1).
    Here is someone else with same problem http://stackoverflow.com/questions/7080266/receive-remote-notification-when-ios- device-is-locked-and-im-not-responding-imm

    Tell Apple
    Apple - iTunes - Feedback

  • I want to upgrade the software (currently I have Mac OS X 10.6.4) but when the mac is downloading the new version i get an error message and is not possible get the most updated software: Mac OS X 10.6.8 or either the most recent itunes why?!?!?!

    I want to upgrade the software (currently I have Mac OS X 10.6.4) but when the mac is downloading the new version i get an error message and is not possible get the most updated software: Mac OS X 10.6.8 or either the most recent itunes why?!?!?!

    Then you either have a network problem or a hardware problem or a corrupted hard drive. You might try:
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    You can also try downloading from another computer on a different network connection.

  • TS1424 Error 42110 appears and cannot watch a movie I pay for rental. I can see it is downloading, but as I click on it to watch it, the error appears and does not let me watch it.

    Error 42110 appears and cannot watch a movie I pay for rental. I can see it is downloading, but as I click on it to watch it, the error appears and does not let me watch it.
    what can I do to resolve it?

    Hello kmb_cb_lb
    If you cannot get your rental to play, then report the issue to the iTunes Store to get it resolved or refunded.
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/HT1933
    Regards,
    -Norm G.

  • [SOLVED] Xorg and keyboard not working after upgrade.

    Hi guys,
    after a `# pacman -Syyu` I got Xorg not starting and keyboard not working: I am unable to do anything.
    I'm posting here pacman's log that I got by booting an Ubuntu Live CD: https://gist.github.com/anonymous/7517806
    Any hint?
    How do you recover a system once it's gone like this? Many thanks in advance.
    J
    Last edited by ifsixwasnine (2013-12-23 13:58:16)

    WonderWoofy wrote:
    I wouldn't necessarily call this [SOLVED].  At best I would probably mention that you found a workaround.  The addition of '(downgrade)' likely makes it fine, but just FYI for future threads.  There are two reasons for this.  One, others who find this thread are likely to dig into it thinking there is a real solution, and two, if you mark it as [Solved] it might generate less attention, lessening the chances of you actually being helped to a real solution.
    Just my 1.46¢
    You're right, problem wasn't actually solved. In fact, yesterday I upgraded the whole system again and the same problem showed up, but I got it fixed.
    Same scenario: after a boot (shorter than usual), what I had was a tty, but I noticed something that I hadn't noticed the last time: the prompt said "Arch Linux 3.11.[?]".
    The kernel version was supposed to be 3.12.[?] so I started investigating and after several attempts, this is how I got the system working again:
    1. Chrooted into the system
    2. Wiped /boot
    3. Re-installed grub
    4. Re-installed linux kernel
    5. Re-created grub.cfg
    6. ???
    7. Profit
    I'm pretty sure that what originated the problem wasn't a "kernel issue" as I pointed out in my previous post, but it was an incorrect installation of grub: in fact, the grub prompt never showed up before yesterday, the system used to boot straight, ignoring the 5 seconds timeout.

  • I recently purchased a MacBook Air and was told by Apple that Keynote and Pages were compatible with MS Applications.. I have since tried to open a Powerpoint Presentation but it comes up with an error message and is not right. Help!

    I recently purchased a MacBook Air and was told by Apple that Keynote and Pages were compatible with MS Applications.. I have since tried to open a Powerpoint Presentation but it comes up with an error message and is not right. Help!

    If there are fonts, transitions, builds, video or audio in the PowerPoint file that are not compatible with Keynote, it will either prevent the presentation opening or Keynote will substitute the settings causing playback changes.
    I use Open Office to play and open any PowerPoint files sent to me, they play exactly as in PowerPoint.
    Open Office is free, you can download it here:
    Open Office for Mac

  • Elements 9 is showing an error message and will not open

    elements 9 is shwing an error message and will not open

    Are you using the new Mavericks OS? If you upgrade to 10.9 with the application already installed the old prefs will have been left behind; so you need to clear them. Start by quitting PSE9.
    Launch Finder and click the Go menu whilst holding down the Option (alt) key. Then go to Library >> Preferences and clear everything relating to PSE9 which usually means deleting the following files:
    com.adobe.PhotoshopElements.plist
    Adobe Photoshop Elements 9 Paths
    Adobe Photoshop Elements 9 Settings
    Also see this link if you normally have Finder set to the cover flow view:
    http://helpx.adobe.com/x-productkb/global/crash-using-open-save-dialog-mac.html

  • HP Elitebook 6930p - Touchpad and keyboard not working with Windows 7

    Hi all,
    I have 6930p, installed Vista Bussines from factory installation and upgraded it to Windows 7 Ultimate. It all went fine, all devices worked. After the first restart, keyboard and touchpad stop responding. I attached USB mouse and keyoboard, and found errors in device manager for these two devices. I tryed to uninstall them and reinstall, but all I get is errors:
    http://img63.imageshack.us/i/47752933.png/
    http://img7.imageshack.us/i/71062213.png/
    In device manager I have the same error message, and devices are listed as unknown.
    When I try to use windows update, it finds the drivers I need but it can not install them.
    http://img193.imageshack.us/i/71145406.png/
    The OS is 32bit, Windows 7 Ultimate. I can not get it work, please help or reffer me to some other place where I can try to find a solution.
    Thanks in advance.

    Hi,
    All driver for Win7 are avaible for Your model here.
    To solve Your problem with keyboard install HP Quick Lunch Buttons.
    To solve Your problem with touchpad install Synaptics touchpad.
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • Macbook pro 2011 mouse / keyboard not response in heavy load

    When I am playing games in the 2011 Macbook pro. Mouse clicks / keyboard sometimes not response or delay, this occur when the machine under heavy load.
    This won't happened in my old BLACK core duo Macbook.
    Does everyone notice this?

    If your machine is less than a month old, you should use your warranty and call AppleCare (you have 90 days of phone support) or take your machine back to the Apple Store (make an appointment with the Genius Bar first) and let them deal with the issue.
    If yours is the 13" model, there is a thread on here (somewhere) about trackpad and keyboard failures when also using Bluetooth, I think (don't quote me on that - I don't have the affected machines so I don't follow the thread too closely).
    But I do believe that Apple is aware of the issue and had 'fixed' it in either a patch preceding 10.9.4 or in 10.9.4 itself.
    Give them a call...
    Clinton

Maybe you are looking for