Error #1096 fault(Client.CouldNotDecode)
Ever since i updated my Flash Player plugin for Firefox 3 my
application keeps reports the following mx:HTTPService error #1096
fault(Client.CouldNotDecode) This issue is only in FireFox but in
Internet Explorer I have no problems bringing up the data. Both
browsers
have the latest version of Flash. When i test my code on a
older version of the flash plugin for FireFox it works. Any ideas
as to why. The XML is properly formatted with no errors.
The funny thing is it all works perfectly in Internet
Explorer Why is this. Is this a bug in the FlashPlayer?
Also my XML is properly formatted.
What do you get when you print $ymessage to file in PHP, to see what it is?
What do you get when you trace userRequest.lastResult.games.game?
What does the PHP return outside of Flex?
If this post answered your question or helped, please mark it as such.
Similar Messages
-
JMS Internal Error at Server Client Adapter!JMS Service is not started
Hi
Can any one tell me how to trouble shoot for following errors:
Failed to Create Connection! Reason: Response from the server could not be reached.
JMS Internal Error at Server Client Adapter!JMS Service is not started
The following hosts could not be reached 143:223:221:10:50310
We are trying to send the request from SONICMQ JMS to R/3 and trying to post the response to Sonic Queue. but we are facing some problems for JMS adapter .
but in JMS sender and receiver adapter i gave different IP and port for listen the SONIC queue. why it is showing in different IP here? this message got from logviewer.
regards
Rambarki...Rambarki,
What is the error displayed on the Adapter Monitoring pages?
Generally the correct error descriptions for connectivity issues are found on adapter monitoring UI than any other.
Other possible reasons could be :
<i>JMS Service is not started
The following hosts could not be reached 143:223:221:10:50310</i> This might be issue with your network settings i.e. XI server is unable to reach the specified IP on specified port.
Regards,
Amol -
Hi,
I'm trying to use the new fault actions in Oracle SOA Suite 12c (12.1.3.0) invokeWS and enqueue.
I've done the following:
fault-policies.xml
<faultName name="custom:MyFault" xmlns:custom="http://xmlns.oracle.com/Application1/Dummy/WebServiceB"
path="SOA\WSDLs\dummybpelprocess_client_ep.wsdl">
<condition>
<action ref="default-enqueue"/>
</condition>
</faultName>
<Action id="default-ws">
<invokeWS uri="http://host:7003/soa-infra/services/default/WebServiceHandler/webservicehandlerbpel_client_ep?WSDL|webservicehandlerbpel_client_ep|WebServiceHandlerBPEL_pt"/>
<!-- format - <Absolute wsdl path>|service name|port name -->
</Action>
<Action id="default-enqueue">
<!-- enqueue uri="eis/aq/aqjmsuserDataSource"/ -->
<enqueue uri="jdbc:oracle:thin:@host:1521:orcl#user/userpassword#USERQUEUE" />
<!-- QueueURI format - jdbc:oracle:thin:@<host>:<port>:<sid>#<un>/<pw>#queue -->
</Action>
Webservice Handler (which is the webservice to be invoked by the faultpolicy) is constructed 1-way pattern, 1 operation, 1 port and using the following schema:
<?xml version="1.0"?>
<schema xmlns="http://www.w3.org/2001/XMLSchema"
targetNamespace="http://xmlns.oracle.com/pcbpel/errorHandling"
xmlns:tns="http://xmlns.oracle.com/pcbpel/errorHandling"
elementFormDefault="qualified">
<element name="RejectedMessage" type="tns:RejectedMessageType"/>
<complexType name="RejectedMessageType">
<sequence>
<!-- base64 encoded strings" -->
<element name="MessageHeader" type="string"/>
<element name="MessagePayload" type="string"/>
<element name="RejectionReason" type="string"/>
</sequence>
<attribute name="RejectionId" type="string"/>
</complexType>
</schema>
The scenario is the following:
Webservice A invokes WebService B
Webservice B has defined a BusinessFault
Webservice A has defined faultbindings using the faulpolicies from the previous snippet, for the reference of WebserviceB
The BusinessFault is thrown by WebServiceB
The fault policy is not able to neither enque or call the webservce to handle the businessexception
A NullPointerException is shown in the logs
The error is also present if enqueue os invokeWS are used in retryFailureAction of a retry action
The error is only present for enqueue or invokeWS actions (I didn't try fileAction)
Traditional actions (such as retry, humanintervention, temrinate) are working properly for businessfaults
The error in logs is the following:
Message
resolveAndrecover: error in fault resolution:java.lang.NullPointerException
Supplemental Detail
at com.collaxa.cube.engine.fp.BPELRecoverFault.recoverFault(BPELRecoverFault.java:102)
at oracle.fabric.CubeServiceEngine.recoverFault(CubeServiceEngine.java:2195)
at oracle.integration.platform.faultpolicy.RecoverFault.recoverAndChain(RecoverFault.java:497)
at oracle.integration.platform.faultpolicy.RecoverFault.resolveAndRecover(RecoverFault.java:337)
at oracle.integration.platform.faultpolicy.FaultRecoveryManagerImpl.resolveAndRecover(FaultRecoveryManagerImpl.java:372)
at oracle.soa.tracking.fabric.service.se.ServiceEngineFaultRecoveryServiceImpl.recoverFault(ServiceEngineFaultRecoveryServiceImpl.java:116)
at oracle.soa.tracking.fabric.service.se.CubeServiceEngineAuditServiceImpl.recoverFault(CubeServiceEngineAuditServiceImpl.java:502)
at com.collaxa.cube.engine.ext.common.FaultPolicyHandler.resolveAndRecover(FaultPolicyHandler.java:115)
at com.collaxa.cube.engine.ext.common.InvokeHandler.handleException(InvokeHandler.java:715)
at com.collaxa.cube.engine.ext.common.InvokeHandler.__callback(InvokeHandler.java:784)
at com.collaxa.cube.engine.ext.common.InvokeHandler.handleNormalInvoke(InvokeHandler.java:657)
at com.collaxa.cube.engine.ext.common.InvokeHandler.handle(InvokeHandler.java:143)
at com.collaxa.cube.engine.ext.common.InvokeHandler.expire(InvokeHandler.java:1371)
at com.collaxa.cube.engine.ext.bpel.common.wmp.BPELInvokeWMP.expire(BPELInvokeWMP.java:62)
at com.collaxa.cube.engine.CubeEngine.expireActivity(CubeEngine.java:3358)
at com.collaxa.cube.engine.CubeEngine._expireActivity(CubeEngine.java:1621)
at com.collaxa.cube.engine.CubeEngine.expireActivity(CubeEngine.java:1557)
at com.collaxa.cube.engine.CubeEngine.expireActivity(CubeEngine.java:1478)
at com.collaxa.cube.ejb.impl.CubeActivityManagerBean.expireActivity(CubeActivityManagerBean.java:115)
at com.collaxa.cube.ejb.impl.CubeActivityManagerBean.expireActivity(CubeActivityManagerBean.java:72)
at com.collaxa.cube.ejb.impl.bpel.BPELActivityManagerBean_8dvvts_ICubeActivityManagerLocalBeanImpl.__WL_invoke(Unknown Source)
at weblogic.ejb.container.internal.SessionLocalMethodInvoker.invoke(SessionLocalMethodInvoker.java:33)
at com.collaxa.cube.ejb.impl.bpel.BPELActivityManagerBean_8dvvts_ICubeActivityManagerLocalBeanImpl.expireActivity(Unknown Source)
at com.collaxa.cube.engine.dispatch.message.instance.ExpirationMessageHandler.handle(ExpirationMessageHandler.java:58)
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:153)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatchTask.java:132)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTask.java:90)
at com.collaxa.cube.engine.dispatch.WMExecutor$W.run(WMExecutor.java:239)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:311)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:263)
I already made sure I had all the artifacts for the AQ queue:
-database
-table
-queue
-permissions
Do you have the same problem?
Are you able to use this new actions?
Please advise
Thanks in advance.
P.S: Related documentation: http://docs.oracle.com/middleware/1213/soasuite/develop-soa/bpel-fault-handling.htm#CHDCIBDFCreating a SR to Oracle....
-
Hi,
I'm using Project Server 2013 and I'm not able to publish a workflow in SharePoint Designer 2013, I get this error:
System.InvalidOperationException: Operation failed with error Microsoft.Workflow.Client.ScopeInactiveException: Scope '/SharePoint/default/d7feb9ea-ccb2-4ec3-8f89-2a45b6cf3777' is not in an active state. Its current
state is 'Unregistering'. HTTP headers received from the server - ActivityId: c47ef567-8c54-4ae0-9a1a-1e4fb51320d8. NodeId: TestServer. Scope: /SharePoint/default/d7feb9ea-ccb2-4ec3-8f89-2a45b6cf3777. Client ActivityId : c6e5979c-20f8-e042-1f9d-2cb2a25d7f9e.
---> System.Net.WebExceptio
The thing is that I transferred the databases from a Prod.Env. to the Test Env. and from that moment on the Test Env. stopped working (only workflows), then I
was thinking that maybe the workflow is not working in the Test Environment because when I transferred the databases from Prod Env to Test Env I didn’t transfer the databases related to workflow, I only transferred:
WSS_Content
PWA_ServiceDB
But I didn’t transfer:
SBGatewayDatabase
SBManagementDB
SBMessageContainer01
WFInstanceManagementDB
WFManagementDB
WFResourceManagementDB
I didn’t transfer them because, before, when I transferred DB’s in version 2010, these DB’s were not needed, as the workflows were done using another method.
So, I tried to create a new workflow in the Test Env. but there is no way, I always get that error.
I've tried to Register again the workflow, and the result looks ok, but it doesn't solve the problem:
Register-SPWorkflowService
–SPSite "http://whatever/PWA"
–WorkflowHostUri "http://TestServer:12291"
–AllowOAuthHttp -Force
Do you know how to solve this issue or have an idea to give me some light?
Thank you for your help and regards,
José EspasesLooks like you haven't defined the WF scope or the site where you are trying to deploy the workflow to isn't included in the scope
Check this article
http://fangdahai.blogspot.in/2013/04/on-premise-windows-workflow-server.html
Thanks | epmXperts | http://epmxperts.wordpress.com -
Error launching Office Client when opening a BPF hyperlink
Version: BPC 10.1 NW Standard
When opening a BPF hyperlink, I am getting a pop up with error Error Launching Office Client: Object does not support property or method 'PushActionsbyValue'.
I have seen threads about this but no definite answer.
Please help if you know the fixHi David,
Please check the if Microsoft office installed is 64 bit and epm addin is 64 bit then the IE should be 64 bit.
we faced the same issue long ago user is using IE 32 bit while office and epm addin are 64 bits.
Thanks,
Dinesh.V -
FRM-99999: A network error occurred, the client will not...
Hi Folks,
I'm getting the below Forms error message appears as an alert,
while loading it in a browser using static HTML.
====
FRM-99999: A network error occured, the client will not be able
to continue.
Details...
Java Exception
java.net.SocketException: Socket read failed|
|at java/net/SocketInputStream.socketRead|
|at java/net/SocketInputStream.read|
|at oracle/forms/net/EncryptedInputStream.fill|
|at oracle/forms/net/EncryptedInputStream.read|
|at java/io/DataInputStream.readUnsignedByte|
|at oracle/forms/engine/Message.readDetails|
|at oracle/forms/engine/Message.readDetails|
|at oracle/forms/net/StreamMessageReader.run|
====
If you have any solution for this problem, Pls mail me.
Regards
Ramasundaram
([email protected])
nullErik Martens (guest) wrote:
: Ramasundaram Perumal (guest) wrote:
: : Hi Folks,
: : I'm getting the below Forms error message appears as an
alert,
: : while loading it in a browser using static HTML.
: : ====
: : FRM-99999: A network error occured, the client will not be
: able
: : to continue.
: : Details...
: : Java Exception
: : java.net.SocketException: Socket read failed|
: : |at java/net/SocketInputStream.socketRead|
: : |at java/net/SocketInputStream.read|
: : |at oracle/forms/net/EncryptedInputStream.fill|
: : |at oracle/forms/net/EncryptedInputStream.read|
: : |at java/io/DataInputStream.readUnsignedByte|
: : |at oracle/forms/engine/Message.readDetails|
: : |at oracle/forms/engine/Message.readDetails|
: : |at oracle/forms/net/StreamMessageReader.run|
: : ====
: : If you have any solution for this problem, Pls mail me.
: : Regards
: : Ramasundaram
: : ([email protected])
: To troubleshoot your Developer 6 Server
: WinNT
: ifsrv60.exe -listen port=9000
: Unix
: $ f60ctl start pool=10
: $ ps -ef | grep f60
: oracle 24713 24709 2 10:35:47 pts/4 0:01 f60runw
: webfile=7,2,(null)
: oracle 24714 24709 2 10:35:47 pts/4 0:01 f60runw
: webfile=8,3,(null)
: oracle 24719 24709 2 10:35:49 pts/4 0:01 f60runw
: webfile=13,8,(null)
: oracle 24712 24709 2 10:35:47 pts/4 0:01 f60runw
: webfile=6,1,(null)
: oracle 24718 24709 2 10:35:48 pts/4 0:01 f60runw
: webfile=12,7,(null)
: oracle 24715 24709 2 10:35:47 pts/4 0:01 f60runw
: webfile=9,4,(null)
: oracle 24717 24709 2 10:35:48 pts/4 0:01 f60runw
: webfile=11,6,(null)
: oracle 24709 1 0 10:35:47 pts/4 0:00 f60srvm
port=9000
: pool=10
: oracle 24720 24709 2 10:35:50 pts/4 0:01 f60runw
: webfile=14,9,(null)
: oracle 24716 24709 2 10:35:48 pts/4 0:01 f60runw
: webfile=10,5,(null)
: oracle 24711 24709 2 10:35:47 pts/4 0:01 f60runw
: webfile=5,0,(null)
I have got the same problem and I do not know how to troubleshoot
Developer 6 Server with ifsrv60.exe -listen port=9000 command. I
am working on WinNt server. Can any one help me.
Thanks
null -
Qmaster error: shared storage client timed out while subscribing to...
Here's my Qmaster setup:
computer 1: CONTROLLER, no nodes
- 8TB RAID hooked up via Fiber
- connected to the GigE network switch via a 6-port bond
- cluster storage set to a path on the RAID
computers 2, 3, 4, 5: RENDER NODES
- each computer has a 2-port bonded connection with the GigE switch
computer 6: Client, with FCS2 installed.
- connected with a single GigE link
I have set up this cluster primarily for command-line renders, and it works great. I submit command-line renders from the client computer, which get distributed and executed on each node. The command line renders specify a source file on the RAID, and a destination path on the RAID. Everything works great.
I run into trouble when trying to use Compressor with this same setup. The files are on the RAID, and all my computers have an NFS automount that puts it in the /Volumes folder on each computer.
I set up my Compressor job and submit it to the cluster. It submits sucessfully, and distributes the work. After a few seconds, each node gives me a timeout error:
"Shared storage client timed out while subscribing to [computer1.local/path to cluster storage]"
Is this a bandwidth issue? Command line renders work fine, I can render 16 simultaneous Quicktimes to the RAID over NFS. I don't see much network activity on any of the computers when it's trying to start the Compressor render, it's as if it's not even trying to connect.
If I submit the SAME compressor job to a cluster with nodes ONLY on the controller computer, it renders fine. Clearly the networked nodes are having trouble connecting to the share for some reason.
Does anybody have any ideas? I have tried almost everything to get this to work. Hooking up each node locally to the RAID is NOT an option unfortunately.WELL I DO NOW!
Thanks. it's taken 6th months and several paid 'professionals' and then you come in here...swinging your minimalist genius. one line. one single line. and its done.
if you are in london, lets lift a beer or five together.
thank you sir. thankyou! -
Decrypt errors occurred for client
I am getting error messages for clients:
11 Mon Jun 14 09:11:56 2010 Decrypt errors occurred for client 00:13:ce:54:57:3c using WPA key on 802.11b/g interface of AP 00:16:9c:91:97:c0
12 Mon Jun 14 09:11:56 2010 Decrypt errors occurred for client 00:16:6f:91:d8:60 using WPA2 key on 802.11b/g interface of AP 00:16:9c:91:97:c0
These are only occuring for clients that are disconnecting....
They can reconnect after a WLC reboot....
We have swapped APs.....
I have seen this error in other forums but it says not to worry about it. There has to be a connection between this and clients getting disconnected. We have anywhere between 10-50 clients on the system at any one time.
Is this a client issue (nic firmware, version) or is this an error in the controller??
AIR-WLC2106-K9
IOS ver: 6.0.196.0
ThanksThis means that the client is using a different key than the one he agreed on using with the AP. There were bugs about this long time ago but nothing recent.
I've seen this happening a lot with old/not updated clients. It rarely happens on intel adapters with latest drivers for example.
So I'd suggest checking the client pattern (are the clients facing this all having old wireless drivers ?).
It can also happen if you offer funny encryption combinations that client doesn't like (wpa1+aes, wpa2+tkip). Try to only enable wpa2/aes and see if it helps.
Nicolas -
WINRM error : The WinRM client cannot complete the operation within the time spe cified
Dear All
Please find
We have developed a management pack on RMS which is analyzing information from linux by using module with calling winrm.
In mentioned module before calling winrm through netcat , the agent status will be controlled on target host.
But this error on specific sles host will halt the executing workflow .
This workflow will working successfully after couple of intervals and again the error coming up.
Although the workflow is halting by the mentioned error a task that used the same module is working fine without any error on that host and
This workflow is running on other instances of the discovered class correctly
(on SLES hosts sles11 and sles10 64bit) .
Error :
The WinRM client cannot complete the operation within the time spe cified. Check if the machine name is valid and is reachable over the network and firewall
exception for Windows Remote Management service is enabled. Error number: -2144108250
The WinRM client cannot complete the operation within the time specified. Check if the machine name is valid and is reachable over the network and firewall exce ption for Windows Remote Management
service is enabled.
Linux host :
SLES 10 32 bit
SP2Hi,
Any error or warning for the operation manager log under event viewer?
Based on my research,
Possible Causes for this issue:
The host is unreachable due to incorrect name resolution, network outage, or
host outage
A network or host-based firewall is blocking TCP port 1270 connectivity to the target host
Resolutions
Verify that Management Server can ping the agent host by Fully-Qualified
Domain Name
Verify that no network firewalls or host firewall is blocking TCP port 1270
In addition, check whether you have heartbeat failures in your environment for linux, if so, please go through the below link:
OpsMgr: UNIX/Linux Heartbeat Failures After Applying KB2585542
http://operatingquadrant.com/2012/01/12/opsmgr-unixlinux-heartbeat-failures-after-applying-kb2585542/
Hope this helps.
Regards,
Yan Li
Regards, Yan Li -
WAAS-CIFSAO Error replying to client
I observe these WAAS CIFS errors on wae devices in my network. Can you please throw some light on when these errors occur and their effect.
Jun 14 11:52:53 waas-hou1.hou.shaw.net 2011 Jun 14 11: java: %WAAS-CIFSAO-3-131207: (965197) Error replying to client 149.77.232.204
ThanksHi,
Thanks for sharing the information.
To be frank, it is tough to narrow down and pin point the problem. The best way to nail down this problem would be to open a TAC case. I suspect few defects mentioned below but not sure if you are really hiting any one of this because we need supporting logs to confirm that.
1. http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?caller=pluginredirector&method=fetchBugDetails&bugId=CSCSz31354
2. http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?caller=pluginredirector&method=fetchBugDetails&bugId=CSCsz78754
Few options if you want to try that might help you.
Option 1: 4.1.5f is getting older now. You may want to upgrade to 4.3.1. The big reason behind upgrade suggestion is - there are lot of CIFS related fixes that have gone after 4.1.5f code.
Option 2: reload WAE. This might help temporarily but issue might come back anytime.
Option 3: Apply "disk delete-data-partitions" and "reload" on WAE from CLI. This will clear all the cache that is built up and may address the issue temporarilty but again, the issue migth come back anytime.
Hope this helps.
PS: Please mark this Answered, if this answers your question. -
CIFSAO-- error replying to client
I am getting continual messages as below in my syslog server:
Local7.Error chiwad01 2011 Aug 12 00: java: %WAAS-CIFSAO-3-131207: (288163) Error replying to client 172.16.6.167.
How do I find out what the problem is ? only get this on this one server
regardsHi,
Is 172.16.6.167 client or server? Whatever it is, this server / pc is either virus infected / is opening constant CIFS connections, may cause slowness across device. These kind of error messages arise in the situation where :
1. A PC is infected wit hVirus / trojen and opening "n" number of remote connections.
2. A server that has AntiVirus software installed may cause this when it pushes AV signature updates to the clients.
3. A server that has any sort of security scanning software installed can cause "n" number of connections to open.
3. A server that has any sort of inventory management software installed can also cause this sort of situation.
In otehr words, this PC / server needs to be analyzed to find out why it is opening so many connections. Is it suppose to open so many connections?
This is not WAAS problem but rather that particular PC / server problem. You may want to run CLI command --> sh stat conn | inc 172.16.6.167
to find out how many open connections this client has.
Hope this helps.
Regards.
PS: If this answers your question, please mark this as Answered. -
Error launching office client : Cannot run the macro 'RegisterEPMXIIFn'
Error launching office client : Cannot run the macro 'RegisterEPMXIIFn'
I've been receiving the above error since last week. I've adjusted the macro settings in excel and tried reinstalling the epm addin numerous times and up till now i haven't managed to get it resolved. Really need someone to help me on this. Whenever i check in excel, the epm add-in is already enabled. Please let me know how else can i get to resolve this.Dear Rudy,
Indeed, could you please try the following suggestions:
In the Internet Explorer, go to : Tools->Internet Options-> Security->Custom Level, in section “Download”, check if the option “Automatic prompting for file downloads“ is enabled
In Excel, go to Excel Options-> Trust Center-> Trust Center Settings-> Macro Settings: check the
options “Disable all macros except digitally signed macros” and "Trust access to the VBA project object model"
Regards,
Siwar -
Hi ,
I am having a problem in a RFC to File scenario. My Sender RFC is working fine and is showing the status green in the CC Monitoring in AdapterEngine under Component Monitoring. But we are trying to trigger the data to the RFC we are getting the following error "Commit fault: com.sap.aii.af.rfc.afcommunication.R
fcAFWException: alterna "
The RFC connection when tested it is ok .. the connection is established.
Please suggest.
Regards,
HemanthikaHi,
1. Refer to the following notes
SAP Note 730870
SAP Note 775765
Also check
RFC Error in SM58 Commit fault
RFC Error in SM58 Commit fault com.sap.aii.af.rfc.afcommunication
2. have a look to R/3 transaction SM58 to find your message
Thanks
swarup -
Import terminates with error Memory fault(coredump)
Hello All,
I am trying to import the data from 9.2.0.8 to 10.2.0.4 on HP UX 11i.
After some times i get error
Memory fault(coredump)
and import job gets disconnected. There are no other logs/ errors reported even at the db level nor at import job.
Request to help if some body knows about the cause.
Thank you,
AnilHi,
I'm also experiencing this error.
Some info on my databases
[EXP]
Version: 9.2.0.5.0 - 64bit Production
Character Set: US7ASCII
National Character Set: AL16UTF16
[IMP]
Version: 9.2.0.5.0 - 64bit Production
Character Set: US7ASCII
National Character Set: AL16UTF16
[Common]
Machine Type: HP-UX B.11.11
The import job terminates and leave a file named core which is sized to the amount i placed in the buffer. How do i proceed on this one? Thanks. -
Error reading application-client.xml,Urgent
Hi ,
I am getting this error,can anyone suggest something for this ?
found error javax.naming.NamingException: Error reading application-client descriptor: No location specified and no suitable instance of the type 'com.crm.Dao.Customer.CustomerData' found for the ejb-ref CustomerData
Waiting for reply,
Regards,
MandarIn the client deployment under META-INF you should have the application-client.xml.
Can you CustomerData - home,remote etc. be seen from the clientside classpath?
Have they been deployed to OC4J?
Looks like it is not being found either on the server or on the client.
Cheers,
Ashok
Maybe you are looking for
-
Filter Option is missing on Developer Toolbar Network Tab
In Other Browser, We have option to filter our network requests. In IE also we have that but while we filter by any text, It straightly giving us the first result's detail. Instead of giving us all the filtered result. By not having that feature, we
-
Regarding shipping condition field vbak-vsbed in VA03 transaction
Hi experts! I want to fetch the discription of field VBAK-VSBED to display in my sap script form. can anyone help me with that. which table should i look for. example : vbak-vsbed = 15 so which table can have the discription for 15 which in my scen
-
Hi all, I have done the workflow(like cusotm approval rule set, business process, activities, etc) for Purchase Orders. The Purchase orders works fine. Now i am trying to implement the same for Requisitions. I have created an Approval rule set, all t
-
HI re Nokia N95 silver PAYG...currently virgin. What's the best way of setting this up for e mail. For sometime I was using this (out going mails only) with the yahoo account on the phone through my router. It stopped working for some/no reason. I w
-
Help needed setting up a presentation
Hello everyone. This is not a technical question, I have been asked by my organization to set up and give a presentation/workshop as a kind of introduction of SAP Portal to several of my colleagues. I've been reading a lot of material, but I'm having