Error 1099 when creating express VI from a VI

I am trying to create a new express VI from an existing VI and am getting the following error:
Error 1099 occurred at Property Node (arg 1) in byob_Create Controls & Inds.vi->byob_GUI Create Block.vi->Block Builder Wizard.vi
Possible reason(s):
LabVIEW: Scripting: SubVI is not loaded.
Property Name: VI Name
This error happens after doing the following:
1. Open the Create or Edit Express VI dialog
2. Click New
3. Select the Create from a VI radio button and click Next
4. Select the VI to make the express VI from and click OK
5. Click Next without changing the defaults for the terminals
6. Enter an Express VI name (use the default path) and click Finish
I am wondering what might be causing this error and how to correct the trouble.

This bug was introduced in LabVIEW 2013. It is too late for me to get a fix into LabVIEW 2014, but I will file a CAR to get it fixed in a future version.
For now, you can fix the issue in LabVIEW 2013 or 2014 by following these steps:
1. Backup the following file on your system: LabVIEW 20xx\project\ExpressDev.llb
2. Replace it with the version attached to this forum post.
3. (LabVIEW 2014 only) Mass compile ExpressDev.llb.
Thanks for reporting the issue. Let me know if you have any other questions.
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman
Attachments:
ExpressDev.llb ‏1433 KB

Similar Messages

Error: 1238 when creating vm template from a virtual machine

Hi,
I encounter a issue when creating a VM template from a virtual machine whihc is store on hyper host, Can anyone give a suggestion to resolve it.
The virtual machine Windows 2008 R2 20110722 cannot be used in this operation because it is on a perimeter network.
Move virtual machine Windows 2008 R2 20110722 off of the perimeter network or select a virtual machine that is not on a perimeter network, and then try the operation again.
ID: 1238
Many thanks in advance.

vCenter has a different concept of what it means to be a template than SCVMM does.
If you are copying the VHD to the SCVMM Library and building a Template form that, be sure that the OS in the VM is generalized by running sysprep.
Otherwise, your VMs from that template will fail deployment. This is what the SCVMM process of creating a Template from a VM does, it applies sysprep to the VM, then copies it (the VM (VHD + configuration) to the Library, then deletes it.
You can also compose a template using a sysprep prepared VHD that already exists in the Library.
Now, a non-domain joined Hyper-V server is a different thing from a 'perimeter' host. That has to do with how it was added to SCVMM.
http://technet.microsoft.com/en-us/library/gg610646.aspx
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Error in executing ABAP program. Error occurred when creating dataset

hi,
when I use LKM SAP ERP to Oracle (SQLLDR) to extract data from SAP ERP server. I execute my interface, and it's stop at extract data step.
This is message:
java.lang.RuntimeException: Error occured in open tool execute method...Error in executing ABAP program...Error in executing ABAP program...Error occurred when creating dataset/abc/ZODI_13001_6001_GLOBAL.txt
I tried others path name, tried slash or backslash. This is content in code tab
OdiSAPAbapExecute "-UPLOAD=1" "-EXECUTE=1" "-EXECUTEBASE_RKM=0" "-ZRFC_RUN_INSTALL=1" "-ABAP_PROGRAM_NAME=ZODI_13001_6001" "-HOST=10.86.87.24" "-USER=sv_hoa" "-PASSWORD=<@=snpRef.getInfo("SRC_PASS") @>" "-SAP_CLIENT=800" "-SAP_LANGUAGE=EN" "-SAP_SYSTEM_NUMBER=02" "-SAP_FUNCTION_GROUP_NAME=ZODI_FGR_13001" "-CONNECTION_POOL_NAME=SAP_ODI_ERP_POOL_10.86.87.24" "-CONNECTION_POOL_SIZE=10" "-FILE_DELIMITER=<@=""+(char)8@>" "-FILE_NAME=ZODI_13001_6001_GLOBAL.txt" "-FTP_HOST=10.86.82.108" "-FTP_USER=anh" "-FTP_PASSWORD=<@=sFtpPassword@>" "-FTP_PASSIVE_MODE=1" "-FTP_TRANSFER_TIMEOUT=100000" "-ODI_VARIABLE_NAMES=" "-ODI_VARIABLE_VALUES=" "-USER_ABAP_PARAMETER_NAMES=IV_DELIMITER,CHAR3;IV_FILENAME,CHAR255;IV_USER,CHAR35;IV_PWD,CHAR35;IV_HOST,CHAR35;IV_HASHVALUE,CHAR35;IV_PATH,CHAR35;IV_MAX_ROW_CNT,SYTABIX;IV_FETCH_BATCH_SIZE,SYTABIX;" "-USER_ABAP_PARAMETER_VALUES=<Value>" "-USER_ABAP_PARAMETER_SEPARATOR=<Value>" "-ABAP_TABLE_PARAMETERS=RETURN,BAPIRETURN;ET_FILE_RETURN,BAPIRET2" "-ABAP_EXPORT_PARAMETERS=ERRORMESSAGE;SY-MSGV1" "-LOG_FILE_NAME=C:\Users\anh\AppData\Local\Temp\SapAbapExecuteOpenTool_13001.log" "-FTP_PATH=/abc/" "-DEV_CLASS=ZODI_DEVCLASS" "-MAX_ROW_COUNT=" "-FETCH_BATCH_SIZE=100000" "-HASH_VALUE_MARKER=HVM" "-ABAP_PROGRAM_BODY=
*Final Type declarations
TYPES : BEGIN OF ty_final,
Y03HOCSINH_HOCSINH_ID TYPE
Y03HOCSINH-HOCSINH_ID,
Y03HOCSINH_MA_HOC_SINH TYPE
Y03HOCSINH-MA_HOC_SINH,
Y03HOCSINH_TEN_HOC_SINH TYPE
Y03HOCSINH-TEN_HOC_SINH,
Y03HOCSINH_GIOI_TINH TYPE
Y03HOCSINH-GIOI_TINH,
Y03HOCSINH_DIA_CHI TYPE
Y03HOCSINH-DIA_CHI,
Y03HOCSINH_GHI_CHU TYPE
Y03HOCSINH-GHI_CHU,
END OF ty_final.
*Final Temp Type Declarations
TYPES : BEGIN OF ty_final_tmp,
Y03HOCSINH_HOCSINH_ID TYPE
Y03HOCSINH-HOCSINH_ID ,
Y03HOCSINH_MA_HOC_SINH TYPE
Y03HOCSINH-MA_HOC_SINH ,
Y03HOCSINH_TEN_HOC_SINH TYPE
Y03HOCSINH-TEN_HOC_SINH ,
Y03HOCSINH_GIOI_TINH TYPE
Y03HOCSINH-GIOI_TINH ,
Y03HOCSINH_DIA_CHI TYPE
Y03HOCSINH-DIA_CHI ,
Y03HOCSINH_GHI_CHU TYPE
Y03HOCSINH-GHI_CHU ,
END OF ty_final_tmp.
*Final Target Type Declarations
TYPES : BEGIN OF ty_final_target,
C0_Y03HOCSINH_HOCSINH_ID TYPE
Y03HOCSINH-HOCSINH_ID,
C1_Y03HOCSINH_MA_HOC_SINH TYPE
Y03HOCSINH-MA_HOC_SINH,
C2_Y03HOCSINH_TEN_HOC_SINH TYPE
Y03HOCSINH-TEN_HOC_SINH,
C3_Y03HOCSINH_GIOI_TINH TYPE
Y03HOCSINH-GIOI_TINH,
C4_Y03HOCSINH_DIA_CHI TYPE
Y03HOCSINH-DIA_CHI,
C5_Y03HOCSINH_GHI_CHU TYPE
Y03HOCSINH-GHI_CHU,
END OF ty_final_target.
* Table type for Y03HOCSINH
TYPES : BEGIN OF ty_Y03HOCSINH,
HOCSINH_ID TYPE
Y03HOCSINH-HOCSINH_ID,
MA_HOC_SINH TYPE
Y03HOCSINH-MA_HOC_SINH,
TEN_HOC_SINH TYPE
Y03HOCSINH-TEN_HOC_SINH,
GIOI_TINH TYPE
Y03HOCSINH-GIOI_TINH,
DIA_CHI TYPE
Y03HOCSINH-DIA_CHI,
GHI_CHU TYPE
Y03HOCSINH-GHI_CHU,
END OF ty_Y03HOCSINH.
TYPES: BEGIN OF gs_text,
line(843) TYPE c,
END OF gs_text.
*Structure Declarations
DATA: wa_final_string TYPE string,
wa_final TYPE ty_final,
wa_final_target TYPE ty_final_target,
wa_Y03HOCSINH TYPE ty_Y03HOCSINH,
*Table Declarations
tt_final TYPE STANDARD TABLE OF ty_final,
tt_Y03HOCSINH TYPE STANDARD TABLE OF ty_Y03HOCSINH,
tt_final_target TYPE STANDARD TABLE
OF ty_final_target,
tt_final_tmp TYPE STANDARD TABLE OF ty_final_tmp,
tt_final_tmp1 TYPE STANDARD TABLE OF ty_final,
gt_result TYPE STANDARD TABLE OF gs_text,
*Variable Declarations
lv_path TYPE string,
lv_flag TYPE char1,
C0_Y03HOCSINH_HOCSINH_ID TYPE
STRING,
C1_Y03HOCSINH_MA_HOC_SINH TYPE
STRING,
C2_Y03HOCSINH_TEN_HOC_SINH TYPE
STRING,
C3_Y03HOCSINH_GIOI_TINH TYPE
STRING,
C4_Y03HOCSINH_DIA_CHI TYPE
STRING,
C5_Y03HOCSINH_GHI_CHU TYPE
STRING,
wa_final_tmp TYPE ty_final_tmp,
lv_file TYPE string,
lv_datum TYPE sy-datum,
lv_date TYPE char10,
wa_result TYPE string,
lv_delimiter type string,
lv_cnt TYPE sytabix,
*-Cursor Declaration
lv_Y03HOCSINH_dbcur TYPE cursor,
lv_tabix_frm TYPE sy-tabix.
lv_delimiter = iv_delimiter.
IF iv_hashvalue = 'HVM'.
*Open/delete output file
CONCATENATE iv_path iv_filename INTO lv_path.
*Check for file existence, if found, delete it
OPEN DATASET lv_path FOR INPUT
IN TEXT MODE
ENCODING DEFAULT.
IF sy-subrc EQ 0.
DELETE DATASET lv_path.
ENDIF.
*Open/create output file
OPEN DATASET lv_path FOR APPENDING
IN TEXT MODE
ENCODING DEFAULT.
IF sy-subrc EQ 0.
*Batch Processing
OPEN CURSOR WITH HOLD lv_Y03HOCSINH_dbcur FOR
SELECT HOCSINH_ID
MA_HOC_SINH
TEN_HOC_SINH
GIOI_TINH
DIA_CHI
GHI_CHU
FROM Y03HOCSINH.
DO.
*Check for the counter, only for first batch
*process new line is required...
lv_cnt = lv_cnt + 1.
REFRESH tt_Y03HOCSINH.
FETCH NEXT CURSOR lv_Y03HOCSINH_dbcur
APPENDING TABLE tt_Y03HOCSINH
PACKAGE SIZE IV_FETCH_BATCH_SIZE.
IF NOT tt_Y03HOCSINH IS INITIAL.
ELSE.
EXIT.
ENDIF.
LOOP AT tt_Y03HOCSINH INTO wa_Y03HOCSINH.
MOVE wa_Y03HOCSINH-HOCSINH_ID
TO wa_final_tmp-Y03HOCSINH_HOCSINH_ID.
MOVE wa_Y03HOCSINH-MA_HOC_SINH
TO wa_final_tmp-Y03HOCSINH_MA_HOC_SINH.
MOVE wa_Y03HOCSINH-TEN_HOC_SINH
TO wa_final_tmp-Y03HOCSINH_TEN_HOC_SINH.
MOVE wa_Y03HOCSINH-GIOI_TINH
TO wa_final_tmp-Y03HOCSINH_GIOI_TINH.
MOVE wa_Y03HOCSINH-DIA_CHI
TO wa_final_tmp-Y03HOCSINH_DIA_CHI.
MOVE wa_Y03HOCSINH-GHI_CHU
TO wa_final_tmp-Y03HOCSINH_GHI_CHU.
APPEND wa_final_tmp TO tt_final_tmp.
ENDLOOP.
free : tt_Y03HOCSINH.
LOOP AT tt_final_tmp INTO wa_final_tmp.
MOVE wa_final_tmp-Y03HOCSINH_HOCSINH_ID
TO wa_final_target-C0_Y03HOCSINH_HOCSINH_ID.
MOVE wa_final_tmp-Y03HOCSINH_MA_HOC_SINH
TO wa_final_target-C1_Y03HOCSINH_MA_HOC_SINH.
MOVE wa_final_tmp-Y03HOCSINH_TEN_HOC_SINH
TO wa_final_target-C2_Y03HOCSINH_TEN_HOC_SINH.
MOVE wa_final_tmp-Y03HOCSINH_GIOI_TINH
TO wa_final_target-C3_Y03HOCSINH_GIOI_TINH.
MOVE wa_final_tmp-Y03HOCSINH_DIA_CHI
TO wa_final_target-C4_Y03HOCSINH_DIA_CHI.
MOVE wa_final_tmp-Y03HOCSINH_GHI_CHU
TO wa_final_target-C5_Y03HOCSINH_GHI_CHU.
Append wa_final_target to tt_final_target.
ENDLOOP.
free : tt_final_tmp.
Clear wa_final_target.
IF NOT iv_max_row_cnt IS INITIAL.
Loop at tt_final_target into
wa_final_target TO iv_max_row_cnt.
MOVE wa_final_target-C0_Y03HOCSINH_HOCSINH_ID
TO C0_Y03HOCSINH_HOCSINH_ID.
MOVE wa_final_target-C1_Y03HOCSINH_MA_HOC_SINH
TO C1_Y03HOCSINH_MA_HOC_SINH.
MOVE wa_final_target-C2_Y03HOCSINH_TEN_HOC_SINH
TO C2_Y03HOCSINH_TEN_HOC_SINH.
MOVE wa_final_target-C3_Y03HOCSINH_GIOI_TINH
TO C3_Y03HOCSINH_GIOI_TINH.
MOVE wa_final_target-C4_Y03HOCSINH_DIA_CHI
TO C4_Y03HOCSINH_DIA_CHI.
MOVE wa_final_target-C5_Y03HOCSINH_GHI_CHU
TO C5_Y03HOCSINH_GHI_CHU.
CONCATENATE
C0_Y03HOCSINH_HOCSINH_ID
C1_Y03HOCSINH_MA_HOC_SINH
C2_Y03HOCSINH_TEN_HOC_SINH
C3_Y03HOCSINH_GIOI_TINH
C4_Y03HOCSINH_DIA_CHI
C5_Y03HOCSINH_GHI_CHU
INTO wa_final_string
SEPARATED BY lv_delimiter.
IF sy-tabix EQ 1 AND lv_cnt EQ 1.
CONCATENATE wa_final_string
lv_delimiter INTO wa_final_string.
ELSE.
CONCATENATE '<@=""+(char)8@>' lv_delimiter wa_final_string
lv_delimiter INTO wa_final_string.
ENDIF.
APPEND wa_final_string TO gt_result.
CLEAR : C0_Y03HOCSINH_HOCSINH_ID,
C1_Y03HOCSINH_MA_HOC_SINH,
C2_Y03HOCSINH_TEN_HOC_SINH,
C3_Y03HOCSINH_GIOI_TINH,
C4_Y03HOCSINH_DIA_CHI,
C5_Y03HOCSINH_GHI_CHU.
ENDLOOP.
ELSE.
Loop at tt_final_target into wa_final_target.
MOVE wa_final_target-C0_Y03HOCSINH_HOCSINH_ID
TO C0_Y03HOCSINH_HOCSINH_ID.
MOVE wa_final_target-C1_Y03HOCSINH_MA_HOC_SINH
TO C1_Y03HOCSINH_MA_HOC_SINH.
MOVE wa_final_target-C2_Y03HOCSINH_TEN_HOC_SINH
TO C2_Y03HOCSINH_TEN_HOC_SINH.
MOVE wa_final_target-C3_Y03HOCSINH_GIOI_TINH
TO C3_Y03HOCSINH_GIOI_TINH.
MOVE wa_final_target-C4_Y03HOCSINH_DIA_CHI
TO C4_Y03HOCSINH_DIA_CHI.
MOVE wa_final_target-C5_Y03HOCSINH_GHI_CHU
TO C5_Y03HOCSINH_GHI_CHU.
CONCATENATE
C0_Y03HOCSINH_HOCSINH_ID
C1_Y03HOCSINH_MA_HOC_SINH
C2_Y03HOCSINH_TEN_HOC_SINH
C3_Y03HOCSINH_GIOI_TINH
C4_Y03HOCSINH_DIA_CHI
C5_Y03HOCSINH_GHI_CHU
INTO wa_final_string
SEPARATED BY lv_delimiter.
IF sy-tabix EQ 1 AND lv_cnt EQ 1.
CONCATENATE wa_final_string
lv_delimiter INTO wa_final_string.
ELSE.
CONCATENATE '<@=""+(char)8@>' lv_delimiter wa_final_string
lv_delimiter INTO wa_final_string.
ENDIF.
APPEND wa_final_string TO gt_result.
CLEAR : C0_Y03HOCSINH_HOCSINH_ID,
C1_Y03HOCSINH_MA_HOC_SINH,
C2_Y03HOCSINH_TEN_HOC_SINH,
C3_Y03HOCSINH_GIOI_TINH,
C4_Y03HOCSINH_DIA_CHI,
C5_Y03HOCSINH_GHI_CHU.
ENDLOOP.
ENDIF.
free : tt_final_target.
IF NOT gt_result IS INITIAL.
CLEAR wa_result.
LOOP AT gt_result INTO wa_result.
TRANSFER wa_result TO lv_path.
ENDLOOP.
ENDIF.
REFRESH gt_result.
*End of main loop for batching
ENDDO.
*Close dataset
CLOSE DATASET lv_path.
CLOSE CURSOR lv_Y03HOCSINH_dbcur.
ELSE.
DATA: lv_mesg TYPE string.
CLEAR et_file_return.
et_file_return-type = 'E'.
CONCATENATE
'Error occurred when creating dataset' lv_path
INTO lv_mesg.
et_file_return-message = lv_mesg.
Append et_file_return.
ENDIF.
ELSE.
CLEAR et_file_return.
et_file_return-type = 'E'.
et_file_return-message =
'Installed ABAP program does not match interface definition'.
APPEND et_file_return.
ENDIF.
Thanks for help

r u able to figure it out..........i got the same error .......can someone help me fix this issue

The operation could not be completed because an error occurred when creating frame 19788 (error -1).

When attempting to build a quicktime movie from my video project on final cut pro I got this message "The operation could not be completed because an error occurred when creating frame 19788 (error -1)".

Kathy ...
Better to post your topic in the Final Cut Pro community here.

The operation could not be completed because an error occurred when creating frame 30256 (error -1).

When trying to export a project from FCPX, I get this error
The operation could not be completed because an error occurred when creating frame 30256 (error -1).
Has anyone any ideas?
Many Thanks

Switch your FCP preferences to show frames and see what's happen at that frame number. Try trash any render files. Switch off background rendering. Don't render. Try replacing the clip at the problem area.

When creating a PDF from a PPT or Keynote application on a Mac using Acrobat X Pro, how do I ensure it can be opened on a PC? Do I need to save as a particular version of Acrobat?

When creating a PDF from a PPT or Keynote application on a Mac using Acrobat X Pro, how do I ensure it can be opened on a PC? Do I need to save as a particular version of Acrobat?

The system was not my own, it was on a PC belonging to the school where I teach. The error message referred to Acrobat 9.0, so I assume that the problem is to do with the version on which the file was created being more recent than that on which I attempeted to open it.

"Macros in this project are disabled..." error message when creating PDF files

The following error occurs when creating a PDF file using a document that was created from a MS Word 2007 templates.
"Macros in this project are disabled..."
The security settings are set appropriately - it's not that. I have done everything I can think of including asking Microsoft; they say it's not them. It may not be, but I do not know how to get around it. It did not happen before upgrading my templates to the Office 2007 format.
Has this happened to anyone else? There is no coding within th etemplates regartding PDFs. We are using Adobe Professional X. The error only occurs when we use Adobe Pro X.
One thing I just noticed, our templates get the following message when we go to save as a PDF using Adobe:
Acrobat PDFMAker needs to save the file before continuing. Do you want PDFMaker to save the file and continue?

Does it work the first time after you delete your Normal.dotm file? You may be running into the same issue that is detailed in this post Unable to open document. Please check to see if you have read permission for the above file.

Error occurs when loading transaction data from other model

Hello Experts, I am trying to validate my transformation file and I can see peculiar behaviour of the transformation file. Even though the transformation file is not complete/ complete with all the mappings, i am getting the same error as above.
I can see options, mapping and conversion sections are validating successfully and throwing the above error.
Incomplete Transformation File
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT= 10
ROUNDAMOUNT=
*MAPPING
CUSTOMER = *NEWCOL (NO_CUST)
Validating the transformation files
Validating options...
Validation of options was successful.
Validating mappings...
Validation of mappings was successful.
Validating conversions...
Validation of the conversion was successful
Creating the transformation xml file. Please wait...
Transformation xml file has been saved successfully.
Begin validate transformation file with data file...
[Start test transformation file]
Validate has successfully completed
ValidateRecords = YES
Error occurs when loading transaction data from other model
Validation with data file failed
I am getting the same error with complete transformation file also. Please let me know where I am doing the mistake or is it a system error?
Thanking you
Praveen

Hi,
By
*MAPPING
CUSTOMER = *NEWCOL (NO_CUST)
you want CUSTOMER to receive a fixed string "NO_CUST"?
If so use,
*MAPPING
CUSTOMER = *STR (NO_CUST)

What does "The operation could not be completed because an error occurred when creating frame 0 (error -1)." mean, and why does it keep happening?

So I've been trying to export a video file from Motion 5 (and FCPX), and I keep recieving the message "The operation could not be completed because an error occurred when creating frame 0 (error -1)". I've found the problem has something to do with a video file in the project, Ive tried multiple versions of said file, in multiple formats (.mov, h264, etc.), and I keep getting the same result. The file was originaly a 640x480 wmv file. Any suggestions?

I ended up figuring out a solution, but I'll get to that in a sec.
To answer your question, I converted the .wmv file in a program called Media Converter (available in the App store), and converted it to an h.264 file (then later to a .mov file, and then to an .mpg). I could view the file, and work with it in projects, but any project I tried to output with any version of said file, would result in the afor mentioned message, with the same results in FCPX (and Compressor 4 as well). I tried multiple frame rates, resolutions, files types, re-converting the file, all with no luck. My impression from said experiments, and reading other discussions was that it was a corrupt file.
Then I got frisky...and a little desperate. I brought the converted file (the .wmv to .mov) into Motion 4... and an export worked first try. So I exported a pro-res file from Motion 4, and used that file in the already built Motion 5 project, and voila!
So, who knows what that means in real terms, as for the whats and whys.

Error occurred when creating frame 3093 (error -1).

Hi there,
i need help on this. when i exporting a video from final cut pro x and it's appear a message
error occurred when creating frame 3093 (error -1).
Edmund

What version is this? Are you using 10.0.9?

Where are files downloaded to on the mac when creating a pdf from web pages?

where on the mac HD are files downloaded to when creating a pdf from web pages?
Im creating web pages from the whole site so creating a large document, so wondered where these fiels are stored on the mac so I can delete when finished as dont want to clog up the hard drive.

Look at the LiveCycle server products.

The operation could not be completed because an error occurred when creating frame 6105 (error -1).

I am trying to share a project and after the 3% of sharing the project it appears this message.
The operation could not be completed because an error occurred when creating frame 6105 (error -1).
What can I do?? I need some help please!!

You need to set the FCP X Preferences to count in frames, locate that frame, delete the clip around it and replace with a fresh one.

The operation could not be completed because an error occurred when creating frame 570 (error -1)

Hi everybody,just started with FCPX and the following occured:
The operation could not be completed because an error occurred when creating frame 570 (error -1)
Result is that i can not share to my hard disk.
If anybody could help me out here....?

CHange General preferences to show frames. Check what's happenING at the frame number. Maybe replace the shot.

The operation could not be completed because an error occurred when creating frame 2829 (error -1)

I'm getting this error code in Final Cut Pro. The operation could not be completed because an error occurred when creating frame 2829 (error -1). What does this mean and how can I fix it? This code comes up when exporting.

Final Cut Pro X 10.0.8 and I'm running it on OS X 10.9.1. I have been doing nothing different for the past few months. I have been creating a weekly video and exporting the same way and everything, but it just did this today for the first time. I have never had this error code before.

Error occurs when creating a new destination in HCI OData Provision Administration

Hi,
An error occurs when creating a new destination in HCI OData Provision Administration.
Please see the screen shot in attachment.
Any help will be appreciated!
Thanks,
Li-hua

It's the same issue as in MissingResourceException when trying to create a destination. Changing the destination name should do the trick.
(still looking for the GWaaS colleagues to fix the original issue.)

Error 1099 when creating express VI from a VI

Similar Messages

Maybe you are looking for