Error 11021 with BI XMLA System

Hi,
I have a problem with a Query. I have built a Query with 2 variables: one interval and one multiple single value variable.The problem is the multiple single value variable.
When I try to load the Query as data service into the VC I get the error:
Error -11021 Cannot create the OLAP data service. Cannot add the OLAP data service to View
Therefore I found this wiki: https://www.sdn.sap.com/irj/sdn/wiki?path=/display/vc/bi%2bvariables%2bxmla
But in this wiki the advise is to connect the BI system directly. I have only a BI JDBC, BI SAP Query, BI ODBO, BI XMLA Connector, but no SAP BI connector.
Does anyone know, what connector is meant or how I could load the query?
regards,
Matthias

Hi Mario,
so with which Connector should I connect my BI system to solve this problem?
Regards,
Matthias

Similar Messages

"An error occured with the AppleShare system"

Hi,
I'm running a shell script that fetchs files on an ftp server each 5 minutes. When an item is available it's copied on an AFP Server (AppleShare IP v6 or Windows 2000 depending of the name of the file). The shell script also check for the shares to be mounted and if not mount them. I also use an AppleScript (on idle) to dispatch the files in folders on the shares.
All runs perfectly but sometime - may be once or twice a day or once per week - the message An error occures with the AppleShare system (this is my translation of the french message Une erreur est survenue avec le système AppleShare) is displayed on the Finder preventing the AppleScript to do its work.
Any idea of how to resolve the problem or to trap it in the AppleScript ?
Regards,
Didier from France.
PowerMac G4 Mac OS X (10.3.9)

solved upgrading to Ma

IP Address Error Message with Multiple Gaming Systems

Hi, I'm new to the forum, and I'm looking for some help with my router and hooking up multiple gaming consoles
I recently purchased an XBOX 360 Elite around the same time I purchased a new Router (Linksys Wireless G with SpeedBooster).
I have an XBOX 360, PS3, and a Nintendo Wii all hooked up wireless... and anytime I go from one system to the next, I get an IP Conflict error (claiming that two devices are using the same IP Address)
Here's a couple of things...
1. My XBOX 360 and PS3 DO NOT sign in Automatically... even though they are setup to
2. When I return to my laptop after playing the PS3, there is a little Yellow Triangle with an "!" in the middle of it in the task bar, saying that there is an IP address conflict and that another machine is trying to share it, or something (didn't get exactly what it said... but that is close to it)
Now, I don't have a problem going online ever... with any of the sytems, but I imagine my Wii is not always connected if the other systems are not auto logging in either... Also, my roommates are unable to go on the computer if someone is playing video games.
Is there anything I can do to fix this???
I have heard somewhere about assigning Individual IP Addresses to each system? Is this something I can/should do?
Thanks for the help in advance!

As you are getting IP address conflict error on your system…..try rebooting all computers and gaming console …..
You can also assign static Ip to X-BOX 360…..PS3 …..& Nintendo as it will release that error from our network

Moving files to another directory got an error message [File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".

Hi all,
I am having a list of files in a folder named datafiles and I am processing them one by one when I finish each one I want to move the file into a folder archive.
I am having a variable named filename and archivefilename and two fileconnections one is originalfiles and archivefiles
archivefilename=replace( @[User::filename],"datafiles","archive")
orginalfiles connection is an expression =@user:filename
archivefies connection is an expression=@user:archivefilename
the filename comes from reading the folder that contains those files
public void Main()
            string[] filenames;
            filenames = Directory.GetFiles(@"C:\luminis\datafiles\");
            Array.Sort(filenames);
            Dts.Variables["filelist"].Value = filenames;
            Dts.TaskResult = (int)ScriptResults.Success;
The folder c:\luminis\archive\ exists
why I am getting this error
My filesystem task : destinationpathvariable =false
destinationconnection:archivefile
overwrite=true
operation=movefile
issourcepathvariable=false
sourceconnection=original file
why am i getting this error[File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".
sohairzaki

there may be 2 problem...
1> specify a target directory only, not with the file name.
OR
2> Try using the unc,path format \\computername\sharename\
let us know your observation...
Let us TRY this | Mail me
My Blog :: http://quest4gen.blogspot.com/

How do I overcome error 150:30 with a replacement system hard drive on a Mac Pro?

I have replaced my system hard disk drive on a Mac Pro and used Mac 'Restore' to restore the complete system from a Time Machine backup. Everything else works correctly, except my current Adobe products (InDesign CS4 and Photoshop CS4) both give a licensing error code 150:30 and each suggest contacting Adobe technical support.
Can you help?
Blair Cramond

Thanks for your reply. Is it necessary to uninstal the existing CS4
products before re-installing?
Ned Murphy <mailto:[email protected]>
5 May 2014 13:14
>
How do I overcome error 150:30 with a replacement system hard
drive on a Mac Pro?
created by Ned Murphy <https://forums.adobe.com/people/Ned+Murphy> in
/Downloading, Installing, Setting Up/ - View the full discussion
<https://forums.adobe.com/message/6354088#6354088>

I ran an iTunes update. It failed with the message System Error. The program can't start because MSVCR80.DLL is missing from your computer. Try reinstalling the program to fix this problem. I tried reinstalling but get the same message.

I ran an iTunes update. It failed with the message "System Error. The program can't start because MSVCR80.DLL is missing from your computer. Try reinstalling the program to fix this problem." I tried reinstalling but get the same message. I looked in my Recycle Bin for that file name but there is none there. Is this a new file that iTunes wants?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99683)

MacBookPro SSD Error- ALERT: The partition map needs to be repaired because there's a problem with the EFI system partition's file system.

MacBook Pro OS x Mavericks. I have Sandisk 256GB SSD and I am getting a below error message.
ALERT: The partition map needs to be repaired because there's a problem with the EFI system partition's file system.
Does anyone know how to resolve this error and fix it ? unfortunately I don't have a Time Machine backup. Thanks!

Have you tried to run the verify/repair permissions and verify/repair disk through the recovery disk? If that didn't work then I would reinstall the OS after backing up. If that still doesn't work I would take it in.

Error "Package in non-original system only modifiabl with Organizer Tools"

Assign Customer Objcet PROG to Package "Z001"(created by myself),it pop-up error "Package in non-original system only modifiabl with Organizer Tools"
how can i deal with this error?
could any warm-hearted fellow give me some tips ?
tks a lot !

Hi sophie,
i think you transported this package from another system to a new system and you are trying to modify the package.
just have a look at below link hop it will help ,otherwise let us know
http://help.sap.com/saphelp_nw04/helpdata/en/57/38de9b4eb711d182bf0000e829fbfe/content.htm
cheers
shibu

General Inquiry Regarding Error Handling with System Exec.vi

I have a sub vi that uses the System Exec.vi to send SMS messages when triggered. I am confused as to how the error handling works and why all of the errors seem to go to the "standard error" vs the "Error out". The reason I am interested is because I am trying to interrupt the error out of another script to execute a command if error=true.
I have intentionally created an error to test this, however it does not seem that the signal is ever being sent to the error out, only to the standard error.
Any help/explanation as to how this works would be greatly appreciated.

The Facebook discussion board is just a pilot and that functionality is not available yet (as to my knowledge). You will have to use the actual forum thread to add attachments. You can click the arrow just to the right of thread topic in the Facebook thread and that will take you to the ni.com/forums thread. Or you can navigate here:
http://forums.ni.com/t5/LabVIEW/General-Inquiry-Regarding-Error-Handling-with-System-Exec-vi/m-p/246...
Having a look at your VI would help to clarify the error handling issue.
Daniel K | NI Applications Engineer | Certified LabVIEW Developer

Loading and with error message :COLLECTION in SOURCE SYSTEM ENDED

Hi,
Facing problem with master data object while loading and with error message :COLLECTION in SOURCE SYSTEM ENDED
This load is getting failed every day. It is a full load and records are getting transferered and added.
when we check in details tab in RSMO all data packets in processing is green but in extraction some of the data selection scheduled are in yellow.We are changing QM status to green as records are added.
Version i am using is BW 3.5
Please let me know what will be the problem???
Thanks,
Edited by: lokesh thonsyd on Feb 18, 2009 8:55 AM

First try to find out the reason for the load failure. Once you fix this, do a manual run of the infopackage and when successful you can continue with the rest of process chain.
Sometimes, it doesn't help to just set a request to green status in order to run the process chain from that step on to the end.
You need to set the failed request/step to green in the database as well as you need to raise the event that will force the process chain to run to the end from the next request/step on.
Therefore you need to open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.

When I try to load Indesign, an error message appears: "the exploitation system you are using is no longer taking responsibility with Indesign". What can I do to load the software?

When I try to load Indesign, an error message appears: "the exploitation system you are using is no longer taking responsibility with Indesign". What can I do to load the software?

Do you have a license for InDesign?

COMMUNICATION ERROR WITH EXTERNAL TAXATION SYSTEM - VERTEX_MS0018

When I copied US company code 3000 to my org using USD as currency code with a a view to simulate US scenarios it threw an error as under.
The error occurred when I was trying to fill in the address tab after copying the company code.
<b>
COMMUNICATION ERROR WITH EXTERNAL TAXATION SYSTEM - VERTEX_MS0018</b>.
Thank you and regards,
Ram

Hi Ram Shiva,
Deactivate External tax
Path:SPRO>Financial Accounting>Financial Accounting Global Settings>Tax on Sales/Purchases>Basic Settings>External Tax Calculation>Activate External Tax Calculation
Hope this will solve
Best Regards
Ashish Jain

'A problem with the cooling system' error message on Satellite A660

Hi all,
Hope I can get some help here. I've had about 5 HP laptops after all of them had problems and faults. I got sick of them and therefore got a refund and bought a high spec A660-1FH.
The A660 has been a great laptop for two days until yesterday when I started getting a warning message saying 'A problem with the cooling system has been detected. Please turn off the computer immediately, and return it for service'.
The cpu fan works fine as you can here it spinning and the temperature of the i5-460m processor is around 40 degrees for both cores - which seems normal to me. I've noted that it happens only when running on battery and if you switch from eco utility to power saver mode. Its fine when running on the 'balanced' power setting. The fan is louder before when this message appears.
As its under 28 days my retailer swapped it for a brand new one straight away. Got the new one home, and the same message appears again. Has anyone else experienced this. As two laptops have had this, I'm wondering if this is normal for the A660 series laptop or if there is really a hardware issue?!
I have tried to upgrade eco utility and the bios of the laptop but both are the latest versions. Can anyone help or share if they experience a similar issue with their laptop?
Thanks

In front of me I have Satellite A660-13Q (PSAW3E) and I have it about 6 weeks now. It runs almost 10 hours daily and until now I didnt notice such message or anything else that can be suspect for hardware functionality.
I really dont know why this happen on your notebook and dont think there is anything you can do about it.
I would exchange it again. What you can also try is to contact nearest Toshiba service. Make a call, explain the situation and ask if they can help you with this.

Need Info for Creating BI XMLA System in EP

Hi,
Can someone tell me, on creating BI XMLA System, whether should we create through System from PAR or System from Template.
If from Template, then in Connection Properties what value we should fill for Database Name.
If from PAR, then in Connection Properties what value we should fill for Datasource Name.
Regards
Deep

Hi Deep,
we created a BI XMLA system from template to a SAP BW 3.0B.
In general it works. Sometimes there are errors caused by connection timeout which we can not figure out why.
Did you see this link:
http://help.sap.com/saphelp_nw04s/helpdata/en/47/fa4f9d671642ada195d20cf7ef4c7c/frameset.htm
The portal test works is fine? Did you test a standard SAP Cube? I do not know why but in our case the SAP Cubes worked better with XMLA.
Try to access the cube via the transaction mdxtest and see if there is everything fine.
Regards
Lars

DB2 9.7 DFACT.SQL syntax error in Import ABAP phase - System Copy

Hi all. I'm trying a system copy with a source system SAP ECC 6.0 ehp4 based on NW 701 and db2 LUW 9.1 .
As it seems supported by SAP, i'm using db2 LUW 9.7 in target system.
O.S. is Windows 2008.
I got an error in phase "Import ABAP".
Sapinst.log says:
INFO 2010-02-18 10:12:14.337
An error occured and the user decided to retry the current step: "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor".
INFO 2010-02-18 10:12:14.509
Switched to user: devadm.
INFO 2010-02-18 10:12:14.572
Creating file C:\Program Files\sapinst_instdir\ERPEhP4\LM\COPY\DB6\SYSTEM\CENTRAL\AS-ABAP\import_monitor.java.log.
INFO 2010-02-18 10:12:14.603
Switched to user: devadm.
INFO 2010-02-18 10:12:14.618
Working directory changed to C:\Program Files\sapinst_instdir\ERPEhP4\LM\COPY\DB6\SYSTEM\CENTRAL\AS-ABAP.
INFO 2010-02-18 10:12:14.618
Output of C:\j2sdk1.4.2_24-x64\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst is written to the logfile import_monitor.java.log.
WARNING 2010-02-18 10:12:44.790
Execution of the command "C:\j2sdk1.4.2_24-x64\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.4.2_24-rev"
Java(TM) Platform, Standard Edition for Business (build 1.4.2_24-rev-b06)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_24-rev-b06, mixed mode)
Import Monitor jobs: running 1, waiting 1, completed 73, failed 0, total 75.
Loading of 'SAPDFACT' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 73, failed 1, total 75.
WARNING[E] 2010-02-18 10:12:44.790
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2010-02-18 10:12:44.790
FCO-00011 The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
Looking into import_monitor.java.log i found that the problem is in dfact import.
I've looked into sapdfact.log and i found:
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100218105045
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: version R7.01/V1.4 [UNICODE]
Compiled Jan 28 2010 20:22:25
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error -loadprocedure fast LOAD:COMPRESS_ALL
(DB) INFO: connected to DB
(DB6) INFO: COMPRESS YES is set during table creation.
(DB6) DB2 9.5 automatic dictionary creation does not require an explicit REORG.
(DB6) Compression threshold is ignored.
(GSI) INFO: dbname   = "DEV                                                                                "
(GSI) INFO: vname    = "DB6                             "
(GSI) INFO: hostname = "UNKNOWN                                                         "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "SRVSAPDEV"
(GSI) INFO: release = "6.0"
(GSI) INFO: version = "6002 Service Pack 2"
(GSI) INFO: machine = "4x AMD64 Level 6 (Mod 26 Step 5)"
(DB) ERROR: DDL statement failed with SQL error
( ALTER TABLE "/BI0/E0PPM_VC1" DROP PRIMARY KEY )
(SQL error -539)
error message returned by dsql:
SQL0539N Table or nickname "SAPDEV./BI0/E0PPM_VC1" does not have a "PRIMARY" key. SQLSTATE=42888
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB6) INFO: executing DDL statements for object /BI0/E0PPM_VC1 from external SQL file.
(DB) ERROR: DDL statement failed with SQL error
( CREATE TYPE 2 UNIQUE INDEX "/BI0/E0PPM_VC1~0" ON "/BI0/E0PPM_VC1"   ("KEY_0PPM_VC1T" ,   "KEY_0PPM_VC11" ,   "KEY_0PPM_VC1U" ,   "KEY_0PPM_VC1P" )   USING STOGROUP ___FAI PRIQTY 16   SECQTY 10240 FREEPAGE 0 PCTFREE 0   GBPCACHE CHANGED DEFINE NO   BUFFERPOOL BP3 COPY NO   PIECESIZE 2097152 K CLUSTER NOT PADDED )
(SQL error -7)
error message returned by dsql:
SQL0007N The character "_" following "" )   USING STOGROUP" is not valid. SQLSTATE=42601
(DB) INFO: disconnected from DB
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100218105045
So as you can see it seems that there's some syntax error in dfacl.log. The wrong SQL statement referred by sapdfact.log is
ind: /BI0/E0PPM_VC1~0
sql: CREATE TYPE 2 UNIQUE INDEX "/BI0/E0PPM_VC1~0" ON "/BI0/E0PPM_VC1"
("KEY_0PPM_VC1T" ,
"KEY_0PPM_VC11" ,
"KEY_0PPM_VC1U" ,
"KEY_0PPM_VC1P" )
USING STOGROUP ___FAI PRIQTY 16
SECQTY 10240 FREEPAGE 0 PCTFREE 0
GBPCACHE CHANGED DEFINE NO
BUFFERPOOL BP3 COPY NO
PIECESIZE 2097152 K CLUSTER NOT PADDED ;
|
ALTER TABLE "/BI0/E0PPM_VC1"
ADD PRIMARY KEY ("KEY_0PPM_VC1T",
"KEY_0PPM_VC11",
"KEY_0PPM_VC1U",
"KEY_0PPM_VC1P") ;
Am i missing something?
Data in referred tables (infocubes) isn't really important.
Is there a safe way to proceed?
Thanks in advance.
Regards
Simone Zaffalon

And this is the strange point: my source system is not a BI and my dataclasses .SQL files are not empty.
Me too i would expect that the files should be empty but instead they are full of object definitions.
For example i have APPL0.SQL that contains a list of all tables of ECC system, for example
tab: MAMT
sql:     CREATE TABLE "MAMT"
        ("MANDT" SAPDB6VARCHAR(000003)
        DEFAULT '000' NOT NULL,
        "MATNR" SAPDB6VARCHAR(000018)
        DEFAULT ' ' NOT NULL,
        "SPRAS" SAPDB6VARCHAR(000001)
        DEFAULT ' ' NOT NULL,
        "MEINH" SAPDB6VARCHAR(000003)
        DEFAULT ' ' NOT NULL,
        "MTXID" SAPDB6VARCHAR(000002)
        DEFAULT ' ' NOT NULL,
        "LFDNR" SAPDB6VARCHAR(000002)
        DEFAULT '00' NOT NULL,
        "MAKTM" SAPDB6VARCHAR(000040)
        DEFAULT ' ' NOT NULL)
        IN "&location&"
        INDEX IN "&locationI&"
        LONG IN "&locationL&"
      COMPRESS YES;
      ALTER TABLE "MAMT" LOCKSIZE ROW;
and like this for all others tables.
What would occur if i launch an import with such .SQL files?
(shuld i put this question to another thread or is fine for you to answer on this?)
Thank you again.
Simone Zaffalon

Error 11021 with BI XMLA System

Similar Messages

Maybe you are looking for