Error 12001

Hi
I purchased Star Trek into Darkness from iTunes yesterday but am struggling to download it to my Mac.The iTunes extras content downloaded fine, just the main movie I'm having trouble with.
It downloads a few hundred mb and then comes up with error 12,001. It suggests that this is a network connection issue but the film downloaded to my ipad fine later on.
Can anyone suggest what the issue might be or how to raise it with iTunes without reems of self help questions to read through.
Cheer

Hello, 1RobbieD.
Thank you for visiting Apple Support Communities.
Here are a couple resources you may find helpful when troubleshooting issues downloading iTunes content.
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/HT1725
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Cheers,
Jason H.

Similar Messages

ITunes download error 12001 and 8003?

When trying to download something I keep getting error 8003 and error 12001. It says I have a network connection problem but my connection is fine. Help?

This the diagnostics from my pc:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
INTELR AWRDACPI
iTunes 7.2.0.35
Current user is an administrator.
Network Adapter Information
Description: Broadcom NetLink (TM) Gigabit Ethernet - Packet Scheduler Miniport
IP Address: 10.0.0.2
Subnet Mask: 255.255.255.0
Default Gateway: 10.0.0.1
DHCP Enabled: No
DNS Servers: 10.0.0.1
Network Connection Information
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
However, my main problem and area of concern is my downloads. I can download songs without hassle but i cannot download large video files. I start downloading like halfway of a 450mb file (TV Show) then it either disconnects "saying that no connection has broken) or when I press pause, then resume again, my downloads start all from zero kb. My internet connection is stable and does not go off.
I am really desperate here. Can someone please help me get my tv show videos to completely download without hassle.

When downloading from iTunes I received this message: unkown error 12001

when downloading from iTunes I received this message: unkown error 12001.
Anyone knows what this is and how to fix it?

Perhaps try the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

TS3694 I keep getting the errors 12001 and 11222. Anyone out there know why I get these errors trying to connect to the iTunes store?

I keep getting the errors 12001 and 11222. Anyone out there know why I get these errors trying to connect to the iTunes store?

http://manuals.info.apple.com/en_US/NewtonProgrammerRef20.PDFError12001
Error 11222
http://support.apple.com/kb/TS3297

TS3694 what is error 12001

What is an error 12001?

Are you certain that is the complete and exact syntax of the error?
Try searching for the complete and exact error, I feel certain you will find a solution.

Itunes store error 12001

I have to login to the internet browser to get pass our firewall and that works great, no problem at all, but when I login to go thru the firewall on itunes trying to get to the itunes store itunes gives me a 12001 error. Why would itunes be giving error?

Go here:
http://www.apple.com/emea/support/itunes/contact.html
to report the issue to the iTunes Store. They should be able to help you with this problem.
Regards.

It won't finish down loading an Itunes extra I paid for. Error 12001 keeps showing up and I checked the connection and it's fine. What do I need to try next

Purchased the movie Lincoln from Itunes. The movie came through but the Itunes extra stopped downloading. error message 12001 shows up again and again even after checking theconnection which is fine. Any suggestions so it will finish the download?

Even though you're getting a different error message number, try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

Besoin d'aide : Configuration d'un 2821 pour remplacer une Freebox

Bonjour,
Je souhaite remplacer complètement ma Freebox par les équipements suivants :
- Un routeur Cisco 2821 équipé d'un module ADSL2+ (HWIC-1ADSL-M)
J'utilise la dernière version de l'Advanced Enterprise Services, IOS version 15.1(4)M7
- Un switch Cisco 2960G qui sera raccordé au 2821.
Je suis en dégroupage totale avec l'opérateur Free (donc IP over ATM je pense ?!)
Les spécifications de ma connexion :
Adsl :
======
Etat                           Showtime
Protocole                      ADSL2+
Mode                           Interleaved
                         Descendant         Montant
Débit ATM              6570 kb/s          887 kb/s
Marge de bruit         5.40 dB            7.30 dB
Atténuation            46.00 dB           25.00 dB
FEC                    5211               27735
CRC                    76                 0
HEC                    3                  267
Je souhaite que mon routeur Cisco se comporte à l'identique de ma Freebox, c-a-dire :
Coté WAN, le routeur récupérera l'IP du DSLAM via le module HWIC ADSL qui sera paramétré avec l'@ MAC de ma BOX.
Coté LAN, le routeur CISCO proposera une config DHCP avec une passerelle par défaut en 192.168.1.50 + DNS récupérés via la conf. IP de l'opérateur (Lan en /24) pour les équipements IP raccordé sur le switch.
J'aurai besoin de faire du port forwarding pour certaines application (un ou deux exemples me serait utile)
J'accède et paramètre chaque équipement en port console via Putty.
La conf du routeur actuellement :
C2821#show config
Using 1860 out of 245752 bytes
! Last configuration change at 09:19:32 UTC Sun Nov 10 2013
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname C2821
boot-start-marker
boot system flash:c2800nm-adventerprisek9-mz.151-4.M7.bin
boot-end-marker
logging buffered 4096
enable secret 5 $**************************************
enable password ************
no aaa new-model
no process cpu autoprofile hog
dot11 syslog
ip source-route
no ip routing
no ip cef
no ipv6 cef
multilink bundle-name authenticated
voice-card 0
crypto pki token default removal timeout 0
license udi pid CISCO2821 sn F***********2
archive
log config
hidekeys
redundancy
controller DSL 0/1/0
interface GigabitEthernet0/0
ip address 192.168.1.50 255.255.255.0
ip nat inside
ip virtual-reassembly in
no ip route-cache
duplex auto
speed auto
no cdp enable
no mop enabled
hold-queue 100 out
interface GigabitEthernet0/1
no ip address
no ip route-cache
shutdown
duplex auto
speed auto
no cdp enable
interface ATM0/0/0
mac-address 0007.****.****
no ip address
no ip redirects
no ip proxy-arp
no ip route-cache
no atm ilmi-keepalive
interface ATM0/0/0.1 point-to-point
ip address dhcp
ip nat outside
ip virtual-reassembly in
no ip route-cache
pvc 8/36
encapsulation aal5mux ip
ip forward-protocol nd
ip http server
no ip http secure-server
ip nat inside source list 1 interface ATM0/0/0.1 overload
ip route 0.0.0.0 0.0.0.0 ATM0/0/0.1
access-list 1 permit any
snmp-server community public RO
control-plane
mgcp profile default
line con 0
exec-timeout 0 0
line aux 0
line vty 0 4
session-timeout 9999
exec-timeout 9999 0
password ************
login
transport input all
scheduler allocate 20000 1000
end
J'ai caché volontairement les mot de passe, adresse mac et numéro de série.
A noter que la commande "dsl operating-mode auto" ne s'enregistre pas quand je la rentre sur l'interface ATM0/0/0, mais il semble que par défaut l'interface soit en auto d'après la documentation Cisco.
La connexion au DSLAM semble se faire correctement, voyant vert clignotant, puis fixe au niveau du module, pas de deconnexion/reconnexion intenpestive.
La connexion ne fonctionne pas... voici les infos que j'obtiens quand j'interroge les interfaces :
C2821>show interface ATM0/0/0.1
ATM0/0/0.1 is up, line protocol is up
Hardware is HWIC-DSLSAR (with Alcatel ADSL Module), address is 0007.****.**** (bia dc7b.94d9.5423)
Internet address will be negotiated using DHCP
MTU 4470 bytes, BW 900 Kbit/sec, DLY 560 usec,
     reliability 81/255, txload 1/255, rxload 1/255
Encapsulation ATM
Keepalive not supported
     530 packets input, 42611 bytes
     15 packets output, 3880 bytes
     0 OAM cells input, 0 OAM cells output
AAL5 CRC errors : 0
AAL5 SAR Timeouts : 0
AAL5 Oversized SDUs : 0
Last clearing of "show interface" counters never
C2821>show interface ATM0/0/0
ATM0/0/0 is up, line protocol is up
Hardware is HWIC-DSLSAR (with Alcatel ADSL Module), address is 0007.****.**** (bia dc7b.94d9.5423)
MTU 4470 bytes, sub MTU 4470, BW 900 Kbit/sec, DLY 560 usec,
     reliability 108/255, txload 1/255, rxload 1/255
Encapsulation ATM, loopback not set
Keepalive not supported
Encapsulation(s): AAL5
23 maximum active VCs, 256 VCs per VP, 1 current VCCs
VC Auto Creation Disabled.
VC idle disconnect time: 300 seconds
Last input 00:00:00, output 00:00:10, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: Per VC Queueing
5 minute input rate 2000 bits/sec, 3 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
     739 packets input, 58437 bytes, 0 no buffer
     Received 0 broadcasts (0 IP multicasts)
     0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
     19 packets output, 4936 bytes, 0 underruns
     0 output errors, 0 collisions, 0 interface resets
     0 unknown protocol drops
     0 output buffer failures, 0 output buffers swapped out
Un "show ip interface brief" :
Interface
IP-Address
OK?
Method
Status
Protocol
GigabitEthernet0/0
192.168.1.50
YES
NVRAM
up
up
GigabitEthernet0/1
unassigned
YES
NVRAM
administratively down
down
ATM0/0/0
unassigned
YES
NVRAM
up
up
ATM0/0/0.1
unassigned
YES
DHCP
up
up
NVI0
192.168.1.50
YES
unset
up
up
J'ai fait deux tests supplémentaires en modifiant l'interface ATM0/0/0.1 : dans un cas avec mon IP Wan en static ou en DHCP => KO dans les deux cas.
Voici les résultats :
1° => Interface ATM0/0/0.1 en IP Static (ip address 88.xx.xx.xx 255.255.255.0)
C2821#show dsl interface atm0/0/0
ATM0/0/0
Alcatel 20190 chipset information
                ATU-R (DS)                      ATU-C (US)
Modem Status:    Showtime (DMTDSL_SHOWTIME)
DSL Mode:        ITU G.992.5 (ADSL2+) Annex A
ITU STD NUM:     0x03                            0x2
Chip Vendor ID: 'STMI'                          'BDCM'
Chip Vendor Specific: 0x0000                    0xA197
Chip Vendor Country:   0x0F                      0xB5
Modem Vendor ID: 'CSCO'                          'BDCM'
Modem Vendor Specific: 0x0000                    0x0000
Modem Vendor Country: 0xB5                      0xB5
Serial Number Near:    FO******** 2821
Serial Number Far:
ModemChip ID:    C196 (3) capability-enabled
DFE BOM:         DFE3.0 Annex M (3)
Capacity Used:   99%                             99%
Noise Margin:     7.0 dB                          7.0 dB
Output Power:    18.0 dBm                        12.5 dBm
Attenuation:     47.0 dB                         26.0 dB
FEC ES Errors:   22                              12001
ES Errors:        3                               4
SES Errors:       1                               0
LOSES Errors:     1                               0
UES Errors:       0                              4094
Defect Status:   None                            None
Last Fail Code: None
Watchdog Counter: 0xC9
Watchdog Resets: 0
Selftest Result: 0x00
Subfunction:     0x00
Interrupts:      342012 (0 spurious)
PHY Access Err: 0
Activations:     1
LED Status:      OFF
LED On Time:     0
LED Off Time:    0
Init FW:         init_AMR-4.0.015_no_bist.bin
Operation FW:    AMR-4.0.015.bin
FW Source:       embedded
FW Version:      4.0.15
                 DS Channel1      DS Channel0   US Channel1       US Channel0
Speed (kbps):             0             6016             0               900
DS User cells:            0             2075
US User & Idle cells:                                     0           764053
Reed-Solomon EC:          0               33             0             27746
CRC Errors:               0                5             0                17
Header Errors:            0                5             0               273
Total BER:                0E-0           4531E-9
Leakage Average BER:      0E-0           4531E-9
Interleave Delay:         0                8             0                61
                        ATU-R (DS)      ATU-C (US)
Bitswap:               enabled            enabled
LOM Monitoring : Disabled
DMT Bits Per Bin
000: 0 0 0 0 0 0 0 8 B B B B B B B B
010: B A A A A A A A A A A B B B B A
020: 0 6 7 7 7 8 8 8 9 9 9 A A A A A
030: A A A A 9 9 9 8 7 7 8 9 A A A A
040: A A A A A 2 A A A A A A A A A A
050: A A 9 9 9 9 9 9 9 9 9 9 9 9 9 9
060: 9 9 9 9 9 9 9 9 9 8 9 8 8 8 8 8
070: 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8
080: 8 8 8 7 8 8 8 8 8 8 7 8 8 7 7 7
090: 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
0A0: 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
0B0: 7 7 7 7 7 6 6 6 6 6 6 6 6 6 6 6
0C0: 6 6 5 5 5 4 2 0 0 0 2 4 5 5 5 5
0D0: 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
0E0: 5 5 5 5 5 5 5 5 5 5 5 4 4 4 4 4
0F0: 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
100: 4 4 4 4 4 4 4 4 3 3 3 3 3 3 3 3
110: 3 3 3 2 2 2 2 2 2 2 2 2 2 2 2 2
120: 2 2 2 2 2 0 0 0 0 2 2 2 2 2 2 2
130: 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1
140: 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0
150: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
160: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
170: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
180: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
190: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1A0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1B0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1C0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1D0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1E0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1F0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
DSL: Training log buffer capability is not enabled
2° => Interface ATM0/0/0.1 en DHCP
C2821>show dsl interface atm0/0/0
ATM0/0/0
Alcatel 20190 chipset information
                ATU-R (DS)                      ATU-C (US)
Modem Status:    Showtime (DMTDSL_SHOWTIME)
DSL Mode:        ITU G.992.5 (ADSL2+) Annex A
ITU STD NUM:     0x03                            0x2
Chip Vendor ID: 'STMI'                          'BDCM'
Chip Vendor Specific: 0x0000                    0xA197
Chip Vendor Country:   0x0F                      0xB5
Modem Vendor ID: 'CSCO'                          'BDCM'
Modem Vendor Specific: 0x0000                    0x0000
Modem Vendor Country: 0xB5                      0xB5
Serial Number Near:    F*********** 2821
Serial Number Far:
ModemChip ID:    C196 (3) capability-enabled
DFE BOM:         DFE3.0 Annex M (3)
Capacity Used:   99%                             99%
Noise Margin:     6.5 dB                          7.0 dB
Output Power:    18.0 dBm                        12.5 dBm
Attenuation:     47.0 dB                         26.0 dB
FEC ES Errors:   12001                           262
ES Errors:        4                               4
SES Errors:       0                               1
LOSES Errors:     0                               1
UES Errors:      4365                             0
Defect Status:   None                            None
Last Fail Code: None
Watchdog Counter: 0x26
Watchdog Resets: 0
Selftest Result: 0x00
Subfunction:     0x00
Interrupts:      8816 (0 spurious)
PHY Access Err: 0
Activations:     1
LED Status:      OFF
LED On Time:     0
LED Off Time:    0
Init FW:         init_AMR-4.0.015_no_bist.bin
Operation FW:    AMR-4.0.015.bin
FW Source:       embedded
FW Version:      4.0.15
                 DS Channel1      DS Channel0   US Channel1       US Channel0
Speed (kbps):             0             6029             0               900
DS User cells:            0             5771
US User & Idle cells:                                     0          3241224
Reed-Solomon EC:          0              348             0              1922
CRC Errors:               0                4             0                 4
Header Errors:            0                4             0               101
Total BER:                0E-0           9037E-10
Leakage Average BER:      0E-0           9037E-10
                        ATU-R (DS)      ATU-C (US)
Bitswap:               enabled            enabled
LOM Monitoring : Disabled
DMT Bits Per Bin
Not able to get complete DMT bin information.Please retry "show dsl" after few seconds.
DSL: Training log buffer capability is not enabled
J'ai besoin d'un peu d'aide pour établir la configuration sur le routeur, mes connaissance étant limité pour réaliser une conf aussi complexe.
Merci pour votre aide.

J'avance concernant mon problème DHCP, le résultat du debug est intéressant on y vois clairement que je n'arrive pas à obtenir d'IP de Free et que l'IOS Cisco me présente avec un client-ID auquel il ajoute "cisco-" et "-AT0/0/0.1"
C'est ce qui doit expliquer le refus de Free de me fournir une adresse IP.
Je pense également que le format de la mac adresse attendu par le DHCP Free est incorrect, il attends un mac du type XX:XX:XX:XX:XX:XX et non un XXXX.XXXX.XXX
Il faut utiliser la commande "ip address dhcp client-id interface-name" pour forcer le client-ID avec une mac de type XX:XX:XX:XX:XX:XX mais je n'arrive pas à utiliser cette commande correctement
J'ai trouvé cette information ici => http://blog.ipspace.net/2007/0.....nt-id.html
J'ai bien lu la syntaxe mais il en veux pas, le sub interface ATM ne l'accepte pas semble t'il ?!
Quelqu'un serait m'aider à l'utiliser ?
Ci-dessous le debug DHCP :
Code:
*Nov 17 10:16:33.659: DHCP: DHCP client process started: 10
*Nov 17 10:16:33.659: RAC: Starting DHCP discover on ATM0/0/0.1
*Nov 17 10:16:33.659: DHCP: Try 1 to acquire address for ATM0/0/0.1
*Nov 17 10:16:33.663: DHCP: allocate request
*Nov 17 10:16:33.663: DHCP: new entry. add to queue, interface ATM0/0/0.1
*Nov 17 10:16:33.663: DHCP: Client socket is opened
*Nov 17 10:16:33.663: DHCP: SDiscover attempt # 1 for entry:
*Nov 17 10:16:33.663: Temp IP addr: 0.0.0.0 for peer on Interface: ATM0/0/0.1
*Nov 17 10:16:33.663: Temp sub net mask: 0.0.0.0
*Nov 17 10:16:33.663:    DHCP Lease server: 0.0.0.0, state: 3 Selecting
*Nov 17 10:16:33.663:    DHCP transaction id: F9D
*Nov 17 10:16:33.663:    Lease: 0 secs, Renewal: 0 secs, Rebind: 0 secs
*Nov 17 10:16:33.663:    Next timer fires after: 00:00:04
*Nov 17 10:16:33.663:    Retry count: 1   Client-ID: cisco-0007.****.**4b-AT0/0/0.1
*Nov 17 10:16:33.663:    Client-ID hex dump: 63697363****************************2E
*Nov 17 10:16:33.667:                        6363*********************302F302E31
*Nov 17 10:16:33.667:    Hostname: C2821
*Nov 17 10:16:33.667: DHCP: SDiscover placed class-id option: 64736C666F72756D2E6F7267
*Nov 17 10:16:33.667: DHCP: SDiscover: sending 312 byte length DHCP packet
*Nov 17 10:16:33.667: DHCP: SDiscover 312 bytes
*Nov 17 10:16:33.667:             B'cast on ATM0/0/0.1 interface from 0.0.0.0
*Nov 17 10:16:37.291: DHCP: SDiscover attempt # 2 for entry:
*Nov 17 10:16:37.291: Temp IP addr: 0.0.0.0 for peer on Interface: ATM0/0/0.1
*Nov 17 10:16:37.291: Temp sub net mask: 0.0.0.0
*Nov 17 10:16:37.291:    DHCP Lease server: 0.0.0.0, state: 3 Selecting
*Nov 17 10:16:37.291:    DHCP transaction id: F9D
*Nov 17 10:16:37.291:    Lease: 0 secs, Renewal: 0 secs, Rebind: 0 secs
*Nov 17 10:16:37.291:    Next timer fires after: 00:00:04
*Nov 17 10:16:37.291:    Retry count: 2   Client-ID: cisco-0007.****.**4b-AT0/0/0.1
*Nov 17 10:16:37.291:    Client-ID hex dump: 63697363****************************2E
*Nov 17 10:16:37.291:                        6363*********************302F302E31
*Nov 17 10:16:37.291:    Hostname: C2821
*Nov 17 10:16:37.291: DHCP: SDiscover placed class-id option: 64736C666F72756D2E6F7267
*Nov 17 10:16:37.291: DHCP: SDiscover: sending 312 byte length DHCP packet
*Nov 17 10:16:37.291: DHCP: SDiscover 312 bytes
*Nov 17 10:16:37.291:             B'cast on ATM0/0/0.1 interface from 0.0.0.0
*Nov 17 10:16:41.291: DHCP: SDiscover attempt # 3 for entry:
*Nov 17 10:16:41.291: Temp IP addr: 0.0.0.0 for peer on Interface: ATM0/0/0.1
*Nov 17 10:16:41.291: Temp sub net mask: 0.0.0.0
*Nov 17 10:16:41.291:    DHCP Lease server: 0.0.0.0, state: 3 Selecting
*Nov 17 10:16:41.291:    DHCP transaction id: F9D
*Nov 17 10:16:41.291:    Lease: 0 secs, Renewal: 0 secs, Rebind: 0 secs
*Nov 17 10:16:41.291:    Next timer fires after: 00:00:04
*Nov 17 10:16:41.291:    Retry count: 3   Client-ID: cisco-0007.****.**4b-AT0/0/0.1
*Nov 17 10:16:41.291:    Client-ID hex dump: 63697363****************************2E
*Nov 17 10:16:41.291:                        6363*********************302F302E31

Error message:FRM-12001: Cannot Create the record group(check your query)

Requirement: Need to get employee name and number in the LOV in search criteria.
So I created LOV "full_name" and Record group Query under Employee Name property palette with
select papf.title||' '||papf.last_name||', '||papf.first_name||' '||papf.middle_names emp_full_name
,papf.employee_number
from apps.per_all_people_f papf, apps.per_person_types ppt
where sysdate between papf.effective_start_date and papf.effective_end_date AND papf.person_type_id=ppt.person_type_id AND ppt.system_person_type IN ('EMP', 'OTHER', 'CWK','EMP_APL')
AND PPT.default_flag='Y' and papf.BUSINESS_GROUP_ID=1
order by papf.full_name
I was unable to save and getting error message "FRM-12001: Cannot Create the record group(check your query)".
I cant use PER_ALL_PEOPLE_F.FULL_NAME since full name here is last_name||title||middle_names||firstname.
But my requiremnet is papf.title||' '||papf.last_name||', '||papf.first_name||' '||papf.middle_names emp_full_name .
Can any one of you help me.

First, Magoo wrote:
<pre>create or replace function emp_full_name ( p_title in varchar2,
p_last_name in varchar2,
p_first_name in varchar2,
p_mid_names in varchar2 ) return varchar2 is
begin
for l_rec in ( select decode ( p_title, null, null, p_title || ' ' ) ||
p_last_name || ', ' || p_first_name ||
decode ( p_mid_names, null, null, ' ' || p_mid_names ) full_name
from dual ) loop
return ( l_rec.full_name );
end loop;
end;</pre>
Magoo, you don't ever need to use Select from Dual. And the loop is completely unnecessary, since Dual always returns only one record. This would be much simpler:
<pre>create or replace function emp_full_name
( p_title in varchar2,
p_last_name in varchar2,
p_first_name in varchar2,
p_mid_names in varchar2 ) return varchar2 is
begin
Return ( Ltrim( Rtrim ( p_title
||' ' ||p_last_name
||', '||p_first_name
||' ' ||p_middle_names )));
end;</pre>
And second:
user606106, you did not mention how you got your record group working. However, you DO have an issue with spaces. If you change this:
<pre>select papf.title||' '||papf.last_name||', '||papf.first_name||' '||papf.middle_names emp_full_name
,papf.employee_number </pre>
to this:
<pre>select Ltrim(Rtrim(papf.title||' '||papf.last_name||', '
||papf.first_name||' '||papf.middle_names)) AS emp_full_name,
papf.employee_number</pre>
it should work. The Ltrim(Rtrim()) removes leading and trailing spaces from the resulting full name.

"an unknown error has occurred (12001)"

I got this message "an unknown error has occurred (12001)" What does that mean? I googled it and found nothing. Please help.

iwilldieforhim wrote:
I got this message "an unknown error has occurred (12001)" What does that mean? I googled it and found nothing. Please help.
Apple mention some errors in their Help page at http://support.apple.com/kb/TS3297 - expand 'Specific Conditions and Alert Messages: (Mac OS X / Windows)' - but not that one (and the information they do give is a bit vague). I would assume it's another server glitch like '11111' which has been happening intermittently for some time. I'm afraid that probably all you can do it try again later - you could try emailing them at podcasts 'at' apple.com but I can't promise you'll get a helpful answer.

HT1725 error code 12001

So I was redeeming a movie using the code that comes on the movie box. There was an interruption while downloading and it seems the movie has two parts to download- the first part "the actual movie" i was able to complete the download but the second part "the extras" i was not able to complete and i get error code "err 12001". i second a window that says to click below but it just seems to go back to not being able to comple the download. Any ideas?

Perhaps try the "Error -50," "-5000," "8003," "8008," or "-42023"section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

12001 an unknown error occured - Can't watch movie

Hi there,
I have rented the movie ''the devils advocate'' but after a while in the last part it was not possible anymore to watch the movie. In the beginning while downloading it stopped also at the last part. When I tried to fix it trough resume download button I get the messa ''unknown error occured 12001''.
Later on I tried to buy the movie and I bought the movie but again the same problem goes on. I tried everything but I can not view the last part of the movie and I never have that problem before.
Is it maybe the movie, maybe something else? I have updated my Itunes version to the last version as well.
Anyone who can help?
Thanks a lot!
Regards

Hello Enes2014,
Thank you for the details of the issue you are experiencing when renting and buying Devil's Advocate. You have gone through some really good troubleshooting steps to resolve the issue. At this point, I recommend following the steps below to report this to the iTunes Store:
To report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase, follow these steps:
Find the email receipt for your purchase.
Click Report a Problem under the app that is having the issue.
When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
Click Report a Problem next to the item you are having an issue with.
From the Choose Problem dropdown menu, choose the appropriate issue.
Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
Click Submit to have your issue reviewed.
You can find the full article here:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Unwanted ITUNES Purchase, Frustrating Errors, Dead Ends and Angry Wife.

This morning my wife flew off the handle as she had just given me a lecture yesterday about how broke we are and to not spend any money till our next payday as we can't afford any overdraft fees. So imagine my frustration when I wake up to her screaming at me because I made an alleged ITUNES purchase of $4 that we sadly did not and don't even have in the bank currently. So now we have negative $34 + dollars. I swear to her up and down I made no ITUNES purchase. I log into ITUNES and VIEW ACCOUNT. AND I scroll down to PURCHASE HISTORY. Which looks like a link or something, (Its blue text..I'd show you a pic, but thats not working either...more on that in a second.) but you can't click it. It says "Most Recent Purchase : March 28, 2013" There is no more info but that...I look on the ipad to see what my purchase history looks like there. There I am able to see pictures of the things that have been "PURCHASED" Nothing had been downloaded or "PURCHASED" save for a few FREE APPS in the last few days. XBOX GLASS, ANGRY BIRDS HD FREE (Because my son got this Angry Birds toy for easter that makes the Birds turn into pigs. We've already bought Angry Birds for the IPHONE, No intention of buying the HD version as well. My point is all downloads were free things. Nothing that would cost money and a bit of my soul. Still unable to see the raw info of PURCHASE HISTORY. The screen with the ORDER NUMBERS and what not. The IN APP PURCHASES ARE SHUT OFF. (As we've been burned by that in the past from our son.) So I can't give her any explanation as to what the heck just punched us finacially in the throat. So I do some google searches trying to get a more detailed discription of our history. Plenty of sources of info come up. Telling me what to do. Telling me what I already know. I try and follow the instructions with no luck. I find a link in the instructions that I can click that says.
"On a computer with iTunes installed, click purchase history to have iTunes open and display your purchase history. You will be prompted for your Apple ID and password."
I click on the "purchase history" hoping that some light is going to be shed on where this mystery $4 charge came from. I get an error saying "We could not complete your iTunes Store request. An unknown error occurred (12001). I google that and get an answer that says this error happens when the clocks on your computer are not in sync with the actual internet time. This is a WINDOWS OS answer. I'm on a MAC. I check my clock anyways and everything is normal. Correct Date, Correct time. It's set to be set automaticallly by the computer as it always has been.
So finally I goto to contact APPLE SUPPORT because I have no other options. Already knowing in the back of my head that this going to be a DEAD END. That some how its going to be my fault even if its not. I click on APPLE SUPPORT and get ANOTHER ERROR saying "We're Sorry, but we were unable to complete your request at this time. Please try again in a few minutes or START OVER NOW. system 99" I click the the START OVER NOW button and get the same error. I wait for a few minutes and get the same error. I wait some more and still get the same error.
I took pictures of all these errors and dead ends and unability to see my purchase history with order numbers and zero in on this 4 dollar purchase and when I tried to upload them. (after resizing my screen grabs to the porportions set by apple.) I'm able to choose my image, but the button to actually post it in this message is greyed out. So I can't even have the simple pleasure of showing you the frustrating road block signs that are popping up for some lame reason too.
My wife was waiting for me to give her some answers, standing there with her coat on, because she was about to goto work. I'm trying desperately to find some answers and literally every flipping turn is blocked by some crazy error message.
I mean, I know how to check my purchase history. I've done it many times in the past. So its super frustrating and sad how a ghost purchase of $4 from the itunes store is going to put me in the dog house all day today. And I can't even SEE WHAT IT IS!?
Thanks apple for putting me one step closer to divorce.

Go here:
http://www.apple.com/emea/support/itunes/contact.html
to report the issue to the iTunes Store. They should be able to help you with this problem.
Regards.

RMAN-10006: error running SQL statement: alter session set remote_dependenc

Backups are failing with following error
RMAN-00554: initialization of internal recovery manager package failed
RMAN-12001: could not open channel default
RMAN-10008: could not create channel context
RMAN-10002: ORACLE error: ORA-00096: invalid value SIGNATURE for parameter remote_dependencies_mode, must be from among MANUAL, AUTO
RMAN-10006: error running SQL statement: alter session set remote_dependencies_mode = signature
Not able to change to signature
SQL> alter session set remote_dependencies_mode=signature;
ERROR:
ORA-00096: invalid value SIGNATURE for parameter remote_dependencies_mode, must
be from among MANUAL, AUTO
I dont see MANUAL or AUTO as valid value for this parameter (http://download.oracle.com/docs/cd/B10501_01/server.920/a96536/ch1175.htm#1023124) DB version is 9.2.0
Parameter type
String
Syntax
REMOTE_DEPENDENCIES_MODE = {TIMESTAMP | SIGNATURE}
Default value
TIMESTAMP
Parameter class
Dynamic: ALTER SESSION, ALTER SYSTEM
=======================================
I believe it could be because of following bug
"A PRE-PATCHED ORACLE IMAGE CAN BE INSTALLED IN MEMORY "
Refer: "https://metalink2.oracle.com/metalink/plsql/f?p=130:15:1613505143885559758::::p15_database_id,p15_docid,p15_show_header,p15_show_help,p15_black_frame,p15_font:BUG,4610411,1,1,1,helvetica"
I appreciate your effort in fixing this issue.
Edited by: user10610722 on Nov 25, 2008 4:37 PM

Hi:
It seems when you are starting RMAN it's executing some commands (one 'ALTER SESSION...'. It's seems to be a batch which has a bad value for SORT_AREA_SIZE. Find it and modify to a proper value as message shows. If you can't find start RMAN by calling directly the executable ($ORACLE_HOME/bin/rman or %ORACLE_HOME%/bin/rman.exe).

Error:AIP-18506: Configuration Builder rollback failed for configurations n

Hi All
While creating a deployement , i am getting below error,
please help me
Error:AIP-18506: Configuration Builder rollback failed for configurations null for business process null
regards
suni

Hi Anuj,
Thanks for your response, Now i getting a new error.
I am getting the below error, while i am deploying the configurations.
AIP-11016:SQL
please find the below errors
2009.07.29 at 06:38:54:371: B2BStarter thread: B2B - (DEBUG) B2BStarter - Current list is empty. Shutdown B2B
2009.07.29 at 06:38:54:372: B2BStarter thread: B2B - (DEBUG) B2BStarter - Shutdown B2B
2009.07.29 at 06:38:54:405: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:shutdown Enter
2009.07.29 at 06:38:54:407: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:shutdown Exit
2009.07.29 at 06:38:54:409: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:shutdown Shutdown B2B server start
2009.07.29 at 06:38:54:464: Thread-18: BusinessLogicLayer - (ERROR) caught error: Closed Connection
2009.07.29 at 06:38:54:468: Thread-18: IP - (ERROR) java.sql.SQLException: Closed Connection
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:174)
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:239)
 at oracle.jdbc.driver.PhysicalConnection.rollback(PhysicalConnection.java:1259)
 at oracle.jdbc.OracleConnectionWrapper.rollback(OracleConnectionWrapper.java:90)
 at oracle.tip.repos.core.driver.CatalogDriver.disconnect(CatalogDriver.java:1662)
 at oracle.tip.repos.core.persistency.PersistencyService.disconnect(PersistencyService.java:578)
 at oracle.tip.buslogic.common.ExecutionContextImpl.disconnectService(ExecutionContextImpl.java:602)
 at oracle.tip.buslogic.common.ExecutionContextManager.closeLongRunningContext(ExecutionContextManager.java:511)
 at oracle.tip.adapter.b2b.data.B2BExecutionContext.close(B2BExecutionContext.java:208)
 at oracle.tip.adapter.b2b.data.DBContext.shutdown(DBContext.java:141)
 at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:455)
 at java.lang.Thread.run(Thread.java:534)
2009.07.29 at 06:38:54:469: Thread-18: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread end ignore exception
2009.07.29 at 06:38:54:471: Thread-18: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread end
2009.07.29 at 06:38:55:426: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:shutdown Shutdown Transport and App Transport
2009.07.29 at 06:38:55:428: B2BStarter thread: B2B - (DEBUG) B2BStarter - B2B Server shutdown
2009.07.29 at 06:40:25:439: B2BStarter thread: B2B - (DEBUG) B2BStarter - Context Initialized
2009.07.29 at 06:40:25:573: B2BStarter thread: B2B - (DEBUG) B2BStarter - Start B2B
2009.07.29 at 06:40:25:767: B2BStarter thread: B2B - (DEBUG) B2BStarter - Starting B2B
2009.07.29 at 06:40:25:873: B2BStarter thread: B2B - (DEBUG) B2BStarter - configuration obtained
2009.07.29 at 06:40:26:079: B2BStarter thread: B2B - (DEBUG) B2BStarter - clear global cache
2009.07.29 at 06:40:26:149: B2BStarter thread: B2B - (DEBUG) XEngine is already started. So clear cached objects inside XEngine.
2009.07.29 at 06:40:26:181: B2BStarter thread: B2B - (INFORMATION) Repository:print: [0] HL7 over MLLP Exchange
2009.07.29 at 06:40:26:185: B2BStarter thread: B2B - (INFORMATION) Repository:print: [1] EDI X12 over AS1
2009.07.29 at 06:40:26:189: B2BStarter thread: B2B - (INFORMATION) Repository:print: [2] Custom Document over Generic Exchange
2009.07.29 at 06:40:26:195: B2BStarter thread: B2B - (INFORMATION) Repository:print: [3] EDI EDIFACT over Generic Exchange
2009.07.29 at 06:40:26:198: B2BStarter thread: B2B - (INFORMATION) Repository:print: [4] EDI X12 over Generic Exchange
2009.07.29 at 06:40:26:204: B2BStarter thread: B2B - (INFORMATION) Repository:print: [5] RosettaNet over RNIF
2009.07.29 at 06:40:26:208: B2BStarter thread: B2B - (INFORMATION) Repository:print: [6] Custom Document over MLLP Exchange
2009.07.29 at 06:40:26:213: B2BStarter thread: B2B - (INFORMATION) Repository:print: [7] Custom Document over AS1
2009.07.29 at 06:40:26:218: B2BStarter thread: B2B - (INFORMATION) Repository:print: [8] EDI EDIFACT over AS1
2009.07.29 at 06:40:26:222: B2BStarter thread: B2B - (INFORMATION) Repository:print: [9] HL7 over Generic Exchange
2009.07.29 at 06:40:26:227: B2BStarter thread: B2B - (INFORMATION) Repository:print: [10] Custom Document over ebMS
2009.07.29 at 06:40:26:233: B2BStarter thread: B2B - (INFORMATION) Repository:print: [11] Custom Document over Internet
2009.07.29 at 06:40:26:239: B2BStarter thread: B2B - (INFORMATION) Repository:print: [12] EDI X12 over Internet
2009.07.29 at 06:40:26:245: B2BStarter thread: B2B - (INFORMATION) Repository:print: [13] EDI EDIFACT over Internet
2009.07.29 at 06:40:26:690: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:initialize Enter
2009.07.29 at 06:40:27:125: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:initialize Exit
2009.07.29 at 06:40:27:126: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Enter
2009.07.29 at 06:40:27:130: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize resetListener = true
2009.07.29 at 06:40:27:133: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initdcx = true
2009.07.29 at 06:40:27:135: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize TPAProcessor
2009.07.29 at 06:40:27:137: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Clear TPA Cache
2009.07.29 at 06:40:27:141: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize DataContext. Pool Size 0
2009.07.29 at 06:40:27:143: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:initialize Treat Response as Request = false
2009.07.29 at 06:40:27:145: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:initialize Exit
2009.07.29 at 06:40:27:148: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize Transport
2009.07.29 at 06:40:27:150: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:initialize Transport LogLevel = DEBUG
2009.07.29 at 06:40:27:304: B2BStarter thread: B2B - (INFORMATION) Repository:getDeliveryEndPointList: Putting http://localhost
2009.07.29 at 06:40:27:309: B2BStarter thread: B2B - (INFORMATION) oracle.tip.adapter.b2b.transport.TransportInterface:initialize: Props: http://localhost transport_callout_waittime = 30
port = 12001
PROTOCOL_ENDPOINT = null
2009.07.29 at 06:40:27:320: B2BStarter thread: B2B - (DEBUG) initialize TransportReceiver: [Emerson_Test_AS2_TransportServer < http > < Emerson >]
2009.07.29 at 06:40:27:797: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize AppTransport LogLevel = ERROR
2009.07.29 at 06:40:27:865: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Enter
2009.07.29 at 06:40:27:869: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Exit
2009.07.29 at 06:40:27:875: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread start
2009.07.29 at 06:40:27:879: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Exit
2009.07.29 at 06:40:27:883: B2BStarter thread: B2B - (DEBUG) B2BStarter - B2B initialized
2009.07.29 at 06:40:29:214: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize Enter
2009.07.29 at 06:40:29:297: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize B2BListen turned on, will listen on IP_OUT_QUEUE for messages
2009.07.29 at 06:40:29:380: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run start listening on message
UI LOG:
2009.07.29 at 04:54:58:859: DEPLOYMENT_MANAGER_THREAD: Repository - (ERROR) java.sql.SQLException: ORA-20011: Inserting into runtime table TIP_DocumentType_rt failed
ORA-06512: at "B2B.IP_DEPLOY", line 3942
ORA-00001: unique constraint (B2B.TIP_DOCUMENTTYPE_RT_RUK) violated
ORA-06512: at line 1
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
 at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:315)
 at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:281)
 at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:638)
 at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:183)
 at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:872)
 at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1160)
 at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3000)
 at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3073)
 at oracle.jdbc.driver.OracleCallableStatement.executeUpdate(OracleCallableStatement.java:4308)
 at oracle.tip.deploy.DeploymentManager.deployObjectInRuntimeSchema(DeploymentManager.java:1067)
 at oracle.tip.deploy.DeploymentManager.run(DeploymentManager.java:419)
 at java.lang.Thread.run(Thread.java:534)
2009.07.29 at 06:38:06:010: Thread-46: Repository - (ERROR) Error -: AIP-11015: Object does not exist 629FF62EB2D55C7BE04400144F873925-27-1-30
 at oracle.tip.repos.core.driver.CatalogDriver.getObject(CatalogDriver.java:759)
 at oracle.tip.repos.core.driver.AssociationList.get(AssociationList.java:70)
 at oracle.tip.buslogic.validation.rules.TradingPartnerCollectionRules.rule7_2(TradingPartnerCollectionRules.java:168)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:324)
 at oracle.tip.buslogic.validation.ModelValidationEngineImpl.invokeMethod(ModelValidationEngineImpl.java:1349)
 at oracle.tip.buslogic.validation.ModelValidationEngineImpl.invokeMethod(ModelValidationEngineImpl.java:1325)
 at oracle.tip.buslogic.validation.ModelValidationEngineImpl.validate(ModelValidationEngineImpl.java:1212)
 at oracle.tip.buslogic.validation.ModelValidationEngineImpl.validateDeployableBusinessObjects(ModelValidationEngineImpl.java:296)
 at oracle.tip.buslogic.validation.ModelValidationEngineImpl.validateDeployableBusinessObjectsAgreement(ModelValidationEngineImpl.java:272)
 at oracle.tip.configuration.B2BConfigurationBuilder.run(B2BConfigurationBuilder.java:492)
 at java.lang.Thread.run(Thread.java:534)
2009.07.29 at 06:38:56:895: DEPLOYMENT_MANAGER_THREAD: Repository - (ERROR) java.sql.SQLException: ORA-20011: Inserting into runtime table TIP_DocumentType_rt failed
ORA-06512: at "B2B.IP_DEPLOY", line 3942
ORA-00001: unique constraint (B2B.TIP_DOCUMENTTYPE_RT_RUK) violated
ORA-06512: at line 1
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
 at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:315)
 at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:281)
 at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:638)
 at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:183)
 at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:872)
 at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1160)
 at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3000)
 at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3073)
 at oracle.jdbc.driver.OracleCallableStatement.executeUpdate(OracleCallableStatement.java:4308)
 at oracle.tip.deploy.DeploymentManager.deployObjectInRuntimeSchema(DeploymentManager.java:1067)
 at oracle.tip.deploy.DeploymentManager.run(DeploymentManager.java:419)
 at java.lang.Thread.run(Thread.java:534)
2009.07.29 at 06:41:05:932: PURGE_MANAGER_THREAD: Repository - (ERROR) java.sql.SQLException: ORA-02431: cannot disable constraint (TIP_ATTACHMENTSTORAGE_RFK) - no such constraint
ORA-06512: at "B2B.IP_PURGE", line 107
ORA-06512: at line 1
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
 at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:315)
 at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:281)
 at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:638)
 at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:183)
 at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:872)
 at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1160)
 at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3000)
 at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3073)
 at oracle.jdbc.driver.OracleCallableStatement.executeUpdate(OracleCallableStatement.java:4308)
 at oracle.tip.repos.purge.PurgeManager.disableConstraints(PurgeManager.java:706)
 at oracle.tip.repos.purge.PurgeManager.purgeConfiguration(PurgeManager.java:836)
 at oracle.tip.repos.purge.PurgeManager.doPurge(PurgeManager.java:475)
 at oracle.tip.repos.purge.PurgeManager.run(PurgeManager.java:381)
 at java.lang.Thread.run(Thread.java:534)
2009.07.29 at 06:41:07:927: PURGE_MANAGER_THREAD: Repository - (ERROR) java.sql.SQLException: ORA-02430: cannot enable constraint (TIP_ATTACHMENTSTORAGE_RFK) - no such constraint
ORA-06512: at "B2B.IP_PURGE", line 47
ORA-06512: at line 1
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
 at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:315)
 at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:281)
 at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:638)
 at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:183)
 at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:872)
 at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1160)
 at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3000)
 at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3073)
 at oracle.jdbc.driver.OracleCallableStatement.executeUpdate(OracleCallableStatement.java:4308)
 at oracle.tip.repos.purge.PurgeManager.enableConstraints(PurgeManager.java:728)
 at oracle.tip.repos.purge.PurgeManager.purgeConfiguration(PurgeManager.java:870)
 at oracle.tip.repos.purge.PurgeManager.doPurge(PurgeManager.java:475)
 at oracle.tip.repos.purge.PurgeManager.run(PurgeManager.java:381)
 at java.lang.Thread.run(Thread.java:534)
2009.07.29 at 06:41:07:931: PURGE_MANAGER_THREAD: Repository - (ERROR) PurgeManager: Purge op failed
2009.07.29 at 06:41:07:933: PURGE_MANAGER_THREAD: Repository - (ERROR) PurgeManager: PurgeManager failed: Error -: AIP-11016: SQL error: java.sql.SQLException: ORA-02430: cannot enable constraint (TIP_ATTACHMENTSTORAGE_RFK) - no such constraint
ORA-06512: at "B2B.IP_PURGE", line 47
ORA-06512: at line 1
2009.07.29 at 06:46:50:646: DEPLOYMENT_MANAGER_THREAD: Repository - (ERROR) java.sql.SQLException: ORA-20011: Inserting into runtime table TIP_DocumentType_rt failed
ORA-06512: at "B2B.IP_DEPLOY", line 3942
ORA-00001: unique constraint (B2B.TIP_DOCUMENTTYPE_RT_RUK) violated
ORA-06512: at line 1
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
 at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:315)
 at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:281)
 at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:638)
 at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:183)
 at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:872)
 at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1160)
 at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3000)
 at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3073)
 at oracle.jdbc.driver.OracleCallableStatement.executeUpdate(OracleCallableStatement.java:4308)
 at oracle.tip.deploy.DeploymentManager.deployObjectInRuntimeSchema(DeploymentManager.java:1067)
 at oracle.tip.deploy.DeploymentManager.run(DeploymentManager.java:419)
 at java.lang.Thread.run(Thread.java:534)

Error 12001

Similar Messages

Maybe you are looking for