Error 126 in serato video windows 8.1 pro

Hello I'm having this problem with Serato Video of Serato DJ 1.6.1 gives me error 126 module not found problem with quicktime.qts someone has had the same or suggest me how to solve it.
It happens only on windows 8.1 pro windows 7 everything works fine

Thank you for the link but it wasn't helpful as it only really said compatibility. What did finally resolve the issue was going directly to AMD and finding that they updated the BootCamp specific drivers. For other that stumble upon this, you cannot use the normal drivers from AMD but you must search for the bootcamp specific drivers (which also includes an updated Catalyst utility and a couple extra things not included in Apples release of the drivers).

Similar Messages

Error 720 Windows 8.1 Pro

When I try to connect to my work with my vpn connection I get below error :
Error connection to VPN. Error 720. I have Windows 8.1 Pro
They advice me to reinstall the tcp/ip protocol but I can't because I can not click on uninstall. Can you help me resolving this (below point 2) problem?
Uninstall the TCP/IP protocol. To do so:
In Control Panel, double-click Network and Dial-up Connections, right-click
Local Area Connection, and then click Properties.
Under Components checked are used by this connection, click
Internet Protocol (TCP/IP), and then click Uninstall.
Follow the on-screen instructions to uninstall TCP/IP.
Restart the computer when prompted, but click No if you are prompted to allow Windows to enable a protocol.
Right-click This PC, and then click Properties.
Click the Hardware tab, and then click Device Manager.
On the View menu, click Show hidden devices.
Under Network adapters, there should be no WAN Miniport IP devices.
Reinstall the TCP/IP protocol. To do so:
In Control Panel, double-click Network and Dial-up Connections, right-click
Local Area Connection, and then click Properties.
Click Install.
In the Select Network Component Type dialog box, click
Protocol, and then click Add.
Under Network Protocol, click Internet Protocol (TCP/IP), and then click
OK.
When the protocol is installed, click Close.
Reset the modem by turning the power off and then on, or for an internal modem, restart the computer.
Test your Internet connectivity.

Hi ,
“They advice me to reinstall the tcp/ip protocol but I can't because I can not click on uninstall”
Please try the following steps to reinstall the Tcp/IP protocol:
1.Press the start button then right-click My Computer > Properties.
2. From properties go to Device Manager; if you are using an older version of Windows you will need to click on the hardware tab to get to Device Manager.
3. On the Device Manager toolbar click on View and then click on Show hidden devices from the menu list.
4. Now locate Network Adapters and click on the “+” sign next to it. If there are no WAN miniports then you can go right to the “Reinstalling TCP/IP Protocol” section. If you do have WAN miniports and they have yellow exclamation marks then proceed to step
8.
5. Get to the registry editor by clicking the start button > All Programs > Accessories > Run. Type in “regedit” and click Ok.
6. In the registry editor you will need to find this key: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlClass{4D36E972-E325-11CE-BFC1-08002BE10318}
7. Export this value for later use by right-clicking on it and choosing Export. Name the file whatever you wish and save it to Desktop.
8. You will now need to do a bit of searching. You’ll be looking through each subkey (e.g. 0001) to find which one matches up with your WAN miniport driver with the exclamation mark. To determine which one corresponds, you will need to look for DriverDesc under
the Name row and look for the value that is in the same column under the Data row. Once you know which subkey contains the problematic driver, right-click it and delete it.
9. Now you must go back to the Device Manager. Remember to click on View and select Show hidden devices. Go to Network Adapters and locate the WAN miniport that was causing problems and uninstall the driver.
And then take the steps you have got to reinstall TCP/IP Protocol
Best regards

Libicuin.dll & error 7 (windows error 126)

Whilst updating itunes my desk top froze, so i downpowered. After starting up again, i tried to go back on itunes again, to which i got
"this application has failed to start because libicuin.dll was not found. re-installing the application may fix this problem".
After clicking "ok", it then shows another message,
"itunes was not installed correctly, please re-install itunes. error 7 (windows error 126).
What i want to know is if i re-install, have i lost all my music, video's etc

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

TS1368 I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

Click here and follow the instructions.
(98897)

When I plug in my Ipod touch to my computer a warning appears "The program cant start because MSVCR80.dll is missing." I can not access my Itunes library. Also, an "error 7 Windows error 126" appears as well. Any ideas?

When I plug in my Ipod Touch to my computer I can not access my Itunes library. The following message appears "The program cant start because MSVCR80.dll is missing." Also, another message appears as well - "Error 7 Windows error 126" as well as APSDaemon.exe.
I have NO IDEA what the heck to do.
Any ideas?
Thanks!

Issues installing iTunes or QuickTime for Windows
solving MSVCR80
iTunes 11.1.4 for Windows: Unable to install or open
Troubleshooting issues with iTunes for Windows updates

I get an error 7 (Windows error 126) when I try to open itunes. It says that it wasn't installed correctly. I have removed and reinstalled this program and all accompanied programs several times. My itunes was fine until I did an update several months ago

Please help. I have been using itunes with my ipod nano for years. Several months ago I did a requested upgrade and have not been able to open itunes since. I get an error message that says that itunes was not installed correctly. Error 7 (Windows error 126) I have tried to uninstall all Apple programs and reinstall itunes several times and it doesn't work. I keep getting the same message. I am looking for a solution to get my library back so I can but more songs for my ipod.

I have same problem--did you ever find a solution?

ITunes reinstallation brings ''error 7 - Windows error 126'

I had to de-install and re-install iTunes (version 11.1.4 64bit) on Windows-8.1. At the end of the installation process I got the message: "Service 'Apple mobile device' could not be started. Please check wheather you have sufficient authorization to start the system-services" (translated from German). This came though I was logged on as Systems Administrator. When I started the Task-Manager as Systems Administrator and tried to start 'Apple mobile device' I got the message "the service does not respond in time tot he start or control request. Error 1053)"
If I ignore the message above and try o start iTunes I get immediately "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126)". This happens whenever I de- and re-install iTunes.
Could you please help.
Thanks in advance
Hans M.

I'm happy to tell you that "Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8",
http://support.apple.com/kb/ht1923 solved my problem.
Great many thanks to whoever created this procedure!
There is one additional remark though: In order to remove the specified folders you have to be logged on as Administrator, knowing the Administrator's password is not sufficient. Anyway, I'm tremendously grateful to you supporters!
Hans M.

When opening iTunes I continue to get the same messages, 'The program can't start because AVFoundationCF.dll is missing' and 'iTunes was not installed correctly. Error 7 (Windows error 126)' I've uninstalled, reinstalled many times - nothing! help please.

When opening iTunes on my new Windows 7 PC I continue to get the same messages, 'The program can't start because AVFoundationCF.dll is missing' and 'iTunes was not installed correctly. Error 7 (Windows error 126)' I've uninstalled and reinstalled many times to no avail, even tried it on a different user account and still nothing. I recently installed Panda Internet Security 2012 (about 12 days ago), initially iTunes worked fine as usual but within the last few days I've been unable to open it with the same messages appearing. I've read through some of these pages and tried everything that's been advised, uninstalling and reinstalling while internet and laptop security is swithched off, downloading tools to completely remove anything related to iTunes, tried it in Safe Mode, nothing has worked. I've also noticed that in the start menu when I click on iTunes, it says '(empty)' where it should have the logo and ability to start the program, does this mean it doesn't download + install properly each time I've tried? Any help would be enormously appreciated.

Doublechecking. Have you also tried the following user tip?
Troubleshooting issues with iTunes for Windows updates

I did the iTunes update and now I am getting a Windows error 126 message.

I did the iTunes update and now I am getting a Windows error 126 message. Now I can't use iTunes at all. Any ideas?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99606)

I can not open iTunes. It started when an upgrade appeared. Now I get this message when I try to open itunes. can not find MSVCR80.dll Then I get ERROR 7 (windows error 126) I tried reinstalling iTunes but that did not help. Please Help Me!

I can not open itunes on my computer. It started when an upgrade appeared. Now I get a message that states This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem. I tried to reinsall the application but it did not help. I also get a message iTunes was not installed correctly. Please reinstall iTunes Error 7 (Windows error 126) Please Help me!

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99623)

After doing a suggested update of itunes on my pc it will not open and gives me a msg saying msvcr80.dll is not on my computer and windows error 126 has occured

After doing an update of itunes on my pc Itunes will no longer open and gives me a msg about MSVCR80.dll not on my computer and Itunes was installed incorrectly error 7 (windows error 126)

This happened to me today as well post installing the latest version of itunes. I did a search on google for the error and came across a recommendation to :
Note: Start Windows in Safe Mode to complete any of the following steps if you're unable to access Windows normally due to the msvcr80.dll error.
If, and only if, you're receiving the msvcr80.dll is missing error when you open Apple iTunes, do the following: (skip this step if your msvcr80.dll error is occurring with a different program)
Uninstall from Windows the following five programs in this order: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, and finally Apple Application Support. If you have iCloud, remove it as well.
Uninstalling these programs in Windows is done from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
Note: Songs and playlists in iTunes will not be removed when you uninstall the iTunes program or any of the other, already-mentioned Apple programs. If you'd still like to back them up, they're usually located in the My Music folder in Windows.
Download the latest version of iTunes from Appleand note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator. If you're not sure how to do that, see How Do I Open an Elevated Command Prompt? for help. That procedure shows you how to open the Command Prompt program as an administrator, but the steps are essentially the same for anything, including the iTunes installation package you just downloaded.
A general overview of removing and reinstalling iTunes can also be found here on Apple's site but the above procedure seems to work better in this particular situation.

Hello, I have windows 7, Im getting msvcr80.dll error 7(windows error 126) when I tried to update my itunes. Now it won't open. Does anyone have a remedy? And when I try to uninstall it says that the file cant be found.

Hello< I have windows 7, I tried to install the new itunes version, last night 1/30/14, Im getting msvcr80.dll error 7 (windows error 126). Does anyone have a remedy for this? When I try to uninstall the ituned program it says it can't be found and to make sure I have permission to uninstall.

Same problem today. Took five times to reinstall without any error messages. I did the following:
1) Went to the C:\program files (x86)\iTunes and C:\program files\iTunes folders and moved every file ending in .dll to the desktop (even if two files in same location had the same name, just replaced)
2) Restarted computer and still got error message
3) Uninstalled all apple programs possible in the following order......itunes, apples software update, apple mobile device support, bonjour, and apple application support.....all performed using the microsoft control panel
4) put all the .dll files on the desktop in the trash and emptied (this is a step apple support did not recomment in their posted solutions but for a final try I wanted to delete everything apple).
5) Restarted computer.
6) Re-installed itunes from apple website
No error messages during re-install and was able to open shortcut in one try.

I have uninstalled and reinstalled the new iTunes but it still will not work. I keep getting the error mesage relating to MSVCR80.dll, the installation error 7 (windows error 126). I have tried moving and removing the dll files including the QTMovie dll

I have tried uninstalling and reinstalling iTunes 15 times regarding the latest release and still get the MSVCR80.dll and Error 7 (Windows error 126) messages.
I have tried moving the dll filesincluding the QTMovie dll file to now avail. Can anyone please help, as I am sure you all, like me, have thousnads of dollars and songs invested in this system and need a fix fast. Can anyone please help???

Dear avid iTunes users - I have cracked it!!!
The response from Apple/iTunes was extremely poor and did not solve the problem.
I have a look in msconfig and observed which applications/services were running - one of which was the 'Apple Application Support'
So ... I had a look at what was in this folder and found the APS Daemon.exe file causing all the trouble.
So ... I simply deleted the Apple folder found in C:\program files\common files\.
I did a restart and did not get the MSCVCR80.dll or Error 7 (windows 126) error messages.
I reinstalled the current version of iTunes (for the 16th time!)
Hey presto!!!
IT WORKED :-O Woooohooo!!!
So ... to all those smarty-pants boffin-brianiacs out there (apple/iTunes): this is how you do it!!!!!!!!!!
YOU DO NOT NEED TO UNINSTALL ALL THE APPLE/QUICKTIME OR RELATED PROGRAMS - JUST DELETE THE APPLE FOLDER IN THE C:\PROGRAM FILES DIRECTORY.
Nuff said.

Trying to start itunes - message appears "APSDAEMON.EXE MSVCR80.DLL is missing. Then another box indicates "Error 7 (Windows error 126). Itunes will not start. Can someone tell me what the problem is and how to fix?

when I tried to update to the new version of Itunes - message box appears "APSDAEMON.EXE MSVCR80.DLL is missing". Then another box indicates "Error 7 (Windows error 126)". Itunes will not start. Can someone tell me what the problem is and how to fix?

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

HT1926 just lost my itunes after doing a update. getting error message MSVCR80.dll and ERROR 7 (Windows error 126)I even tried to reinstall the whole program off from here. What happened? HELP!

I tried to open my Itunes toady on my home computer. It said to update the library so I did. Now it wont open or anything. Tried reinstalling everything and get the error messages posted in the title above. Please Help. I have a lot tied into Itunes. Now when I check for updates it says everything is upt to date but when I try to open it i still get these two erroe messages. MSVCR80.dll and ERROR 7 (Windows error 126)

Hello berlinfire1979,
The following article provides further information regarding this error, and steps that can help get iTunes working again.
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/kb/TS3074
Cheers,
Allen

Error 126 in serato video windows 8.1 pro

Similar Messages

Maybe you are looking for