Error 12703 VMM cannot establish a trust relationship SSL/TLS V2V

Issue with V2V in VMM. I though I'd share this one. On a customer site doing a number of V2Vs and P2Vs via VMM. On the V2V it would create the object then fail with the message below where %ServerName is one of the Hyper-V hosts:
12703 VMM cannot establish a trust relationship for
the SSL/TLS secure channel for %ServerName;
server.
Install the certificate to the trusted
people root store of the VMM server
and then try the operation again.
After much digging and testing I found it was an issue with VMM talking to the ESX host. Nothing to do with certs or the hyper-v hosts. I've worked round this issue by migrating the VM onto another ESX host. The ESX environment is going to be decommissioned
anyway.
Hope this helps someone out there.

Please let us know if you are using
SharePoint communicates to an external service via HTTPS
Please try perform following steps:
Fix is to setup a trust between SharePoint and the server requiring certificate validation.
In SharePoint Central Administration site, go to “Security” and then “Manage Trust”. Upload the certificates to SharePoint. The key is to get both the root and subordinate certificates on to SharePoint.
The steps to get the certificates from the remote server hosting the WCF service are as follows:
1. Browse from IE to the WCF service (e.g., https://remotehost/service.svc?wsdl)
2. Right click on the browser body and choose “Properties” and then “Certificates” and then “Certificate Path”.
This tells you the certificate chain that’s required by the other server in order to communicate with it properly. You can double-click on each level in the certificate chain to go to that particular certificate, then click on “Details” tab, “Copy to
File” to save the certificate with the default settings.
As an example, get both VeriSign & VeriSign Class 3 Extended Validation SSL CA.
reference : http://blogs.technet.com/b/sharepointdevelopersupport/archive/2013/06/13/could-not-establish-trust-relationship-for-ssl-tls-secure-channel.aspx
If my contribution helps you, please click Mark As Answer on that post and
Vote as Helpful
Thanks, ShankarSingh(MCP)

Similar Messages

Sharepoint and SSRS report trust relationship ssl/tls secure channel remote certificate is invalid

I have no experience with sharepoint at all. but this is what I observed.
I intermittently getting this error message on my sharepoint. could not establish trust relationship for the ssl/tls secure channel. Remote Certificate is invalid according to the validation procedure.
Screnshot of the error
This is how the sharepoint page layout.
I have report.aspx. and below is the content of the aspx file.
The url is http://sharepoint.COMPANY.com/Pages/Report.aspx.
The URL is intranet only.
The sharepoint is hosted in SERVER1 and the SSRS is hosted in SERVER.
I observed this error happens on both HTTP and HTTPS http sharepoint COMPANY com/Pages/Report.aspx OR https sharepoint COMPANY com/Pages/Report.aspx
So far, the step I did was to follow this blog http://krishnasangani.blogspot.ca/2013/06/the-remote-certificate-is-invalid.html Restarted
IIS in SERVER1 AND SERVER2. but the problem persist. Another I have done is to click the certificate in internet explorer and everything looks ok on that side to (certificate is valid)
It seems to only happen earlier during the morning, then it fixes itself around 9 Oclock. It has been on going for about 2 weeks. Please help troubleshooting this.
<%@ Page Inherits="Microsoft.SharePoint.Publishing.TemplateRedirectionPage,Microsoft.SharePoint.Publishing,Version=14.0.0.0,Culture=neutral,PublicKeyToken=71e9bsasdasdasd9c" %> <%@ Reference VirtualPath="~TemplatePageUrl" %> <%@ Reference VirtualPath="~masterurl/custom.master" %><%@ Register Tagprefix="SharePoint" Namespace="Microsoft.SharePoint.WebControls" Assembly="Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bsasdasdasd9c" %>
<html xmlns:mso="urn:schemas-microsoft-com:office:office" xmlns:msdt="uuid:547SF010-65B3-11d1-A29F-00457845FFSW"><head>

<title>Report</title></head>
A few questions I have in mind is Any pointer to troubleshoot this problem AND By looking at the ASPX file, Would you be able to determine what method is my Sharepoint page calling the SSRS report , integrated mode, native mode? IEFrame? The reason I am asking
this is that maybe IF I google using the right terminology I can get to the similar problem and solution.
Thanks

Please let us know if you are using
SharePoint communicates to an external service via HTTPS
Please try perform following steps:
Fix is to setup a trust between SharePoint and the server requiring certificate validation.
In SharePoint Central Administration site, go to “Security” and then “Manage Trust”. Upload the certificates to SharePoint. The key is to get both the root and subordinate certificates on to SharePoint.
The steps to get the certificates from the remote server hosting the WCF service are as follows:
1. Browse from IE to the WCF service (e.g., https://remotehost/service.svc?wsdl)
2. Right click on the browser body and choose “Properties” and then “Certificates” and then “Certificate Path”.
This tells you the certificate chain that’s required by the other server in order to communicate with it properly. You can double-click on each level in the certificate chain to go to that particular certificate, then click on “Details” tab, “Copy to
File” to save the certificate with the default settings.
As an example, get both VeriSign & VeriSign Class 3 Extended Validation SSL CA.
reference : http://blogs.technet.com/b/sharepointdevelopersupport/archive/2013/06/13/could-not-establish-trust-relationship-for-ssl-tls-secure-channel.aspx
If my contribution helps you, please click Mark As Answer on that post and
Vote as Helpful
Thanks, ShankarSingh(MCP)

Import the certificate to establish a trust relationship

Hi ,
In BI Configuration, Bi Diagnostic tool gives the below error.
*Calls from WebAS ABAP to WebAS Java will fail because the certificate of the BI mastersystem is not imported into J2EE ticket keystore
Import the certificate to establish a trust relationship*
Please help
Thanks, Satish

Are u having problems importing the certificate ?
If so,
When you are in STRUSTSSO2 and you double clik on "Owner" the below section gets updated with the certificate information. Make sure that the certificate is valid and you have proper CN and OU configured.
When you export the certificate from STRUSTSSO2, please select Base64 as the file format for the certificate that is exported and then try to import that one in the java system.
(or)
Are u having problems after importing the certificate on Java system?
If so, what is the error you are facing ?
- Shanti

When trying to access a site I get the error message "Firefox cannot establish a connection at....."

Site is "come in". I've run all scans, two lots of malawre and windows security essentials, reset firefox, checked network settings, in fact everything suggested on here. Help !!!!
PS It's the same on all browsers.

I've tried all of these things. And again just to confirm. When removing Firefox from the Firewall despite the setting on it only allowing sites that are listed, still goes through, what's that about?

Set-IRMConfiguration failed with error "Cou ld not establish trust relationship for the SSL/TLS secure channel."

Hi, experts
I'm trying to configure a lab environment according tutorial http://www.msexchange.org/articles-tutorials/exchange-server-2010/compliance-policies-archiving/rights-management-server-exchange-2010-part3.html
After completing configuration, I execute cmdlet Set-IRMConfiguration -InternalLicensingEnabled $true, but get error
The remote certificate is invalid according to the validation procedure. ---> The underlying connection was closed: Cou
ld not establish trust relationship for the SSL/TLS secure channel. ---> Failed to get Server Info from https://exhv-65
94/_wmcs/certification/server.asmx.
+ CategoryInfo : InvalidOperation: (:) [Set-IRMConfiguration], Exception
+ FullyQualifiedErrorId : C810E449,Microsoft.Exchange.Management.RightsManagement.SetIRMConfiguration
Then I run cmdlet Test-IRMConfiguration -Sender [email protected] and get error
Results : Checking Exchange Server ...
- PASS: Exchange Server is running in Enterprise.
Loading IRM configuration ...
- PASS: IRM configuration loaded successfully.
Retrieving RMS Certification Uri ...
- PASS: RMS Certification Uri: https://server1/_wmcs/certification.
Verifying RMS version for https://server1/_wmcs/certification ...
- WARNING: Failed to verify RMS version. IRM features require AD RMS on Windows Server 2008 SP2 with the
hotfixes specified in Knowledge Base article 973247 (http://go.microsoft.com/fwlink/?linkid=3052&kbid=973247)
or AD RMS on Windows Server 2008 R2.
Microsoft.Exchange.Security.RightsManagement.RightsManagementException: Failed to get Server Info from https:
//server1/_wmcs/certification/server.asmx. ---> System.Net.WebException: The underlying connection was clos
ed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authenticatio
n.AuthenticationException: The remote certificate is invalid according to the validation procedure.
at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest async
Request, Exception exception)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest async
Request)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest async
Request)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest async
Request)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequ
est asyncRequest)
at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Obje
ct state)
at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size)
at System.Net.ConnectStream.WriteHeaders(Boolean async)
--- End of inner exception stack trace ---
at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.Exchange.Security.RightsManagement.SOAP.Server.ServerWS.GetServerInfo(ServerInfoRequest[] req
uests)
at Microsoft.Exchange.Security.RightsManagement.ServerWSManager.ValidateServiceVersion(String featureXPath
--- End of inner exception stack trace ---
at Microsoft.Exchange.Security.RightsManagement.ServerWSManager.ValidateServiceVersion(String featureXPath
at Microsoft.Exchange.Management.RightsManagement.IRMConfigurationValidator.ValidateRmsVersion(Uri uri, Se
rviceType serviceType)
at Microsoft.Exchange.Management.RightsManagement.IRMConfigurationValidator.TryGetRacAndClc()
OVERALL RESULT: PASS with warnings on disabled features
From the error message, this issue seem to related with SSL/TLS connection. So I go back to check configuration and find out a difference to tutorial. Current SCP url is https://server1/_wmcs/certification, but in tutorial it is https://server1:433/_wmcs/certification.
On my opinion, I don't think it is the real reason.
So, how can I resolve this error? Could you give me some suggestion? Thanks in advance.
System Info:
Windows Server 2008 R2 + Exchange Server 2010 SP3 RTM

Hi
Please have a try with the solution on this KB article
“Error message when you try to test access from the Microsoft Dynamics CRM E-mail Router: "Incoming Status: Failure - The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel"”
http://support.microsoft.com/kb/954584/en-us
Cheers
Zi Feng
TechNet Community Support

ADFS 3.0 Proxy cannot create trust relationship

Hi,
I am trying to configure ADFS 3.0 High Avalilabilty scenario (Two AD FS farm with WID , NLB + Two ADFS 3.0 Proxy server with NLB) and I got following error during the second ADFS proxy installation:
An error occurred when attempting to establish a trust relationship with the federation service. Error:
The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.
The first proxy server is working fine and the trustrelationship is established. Any idea why?
Thanks in advance.
Isurinda.

Hello,
this is better asked in
http://social.msdn.microsoft.com/Forums/office/en-US/home?forum=Geneva
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

Sybase Connection Error - cannot establish database connection

BO Data Services Tool -> Creation of new Data Store -> Sybase ASE
When I tried to create a sybase datastore(New connection), I've got this error message. But I am able to connect to sybase database with client application with same connection parameter. I appreciate if someone come across same issue.
ERROR MESSAGE
*WARNING: Cannot establish database connecton.
u2018Sybase connecton error: <Sybase ASE Server message number <1640> State <2> Severity <16> From Server <tstlS03>: Message Text is:
Adaptve Server requires encrypton of the login password on the network.
Sybase ASE Server message number <4002> State <1> Severity <14> From Server <tstlSO3>: Message Text is: Login failed.
Sybase CS Library message number <6717S468> Severity <4>: Message Text is: ct_connectO: protocol specific layer: external error: The attempt to connect to the server failed.>.u2019 lODI- 1111341)

I tried to create repositories for sybase, it failed. But it succeeded when created datastore. The procedures's as follow:
1. Create ODBC for this sybase connection, and it should display "Connection successful" when you click "Test connection".
(you need to specify several parameters like user id & password, server,database name and file, etc.)
2. Create datastore by using ODBC connection.

Remote powershell cannot establish secure channel

Using the PowerShell Azure cmdlets on the remote computer:
If for example I perform an invoke-command .. -scriptblock {Get-AzureSQLDatabaseServer} I get the "Could not establish secure channel for SSL/TLS..." message.
However if I RDP to that computer with the same credential I can perform the Get-AzureSQLDatabaseServer there.
And more disconcerting, once I have done it through the rdp the invoke-command version starts to work and works while the rdp session is still live, and certainly for several minutes after the rdp session is closed.
Does anyone know of something special that has to be done to invoke azure cmdlets remotely?

HI,
sorry for the delay . I am unable to repro the issue. and even without RDP to the azure VM , I can run the azure command including the AzureSQLDatabaseServer.
I am not sure if there is any change in the status from your side since the last update on this thread. But I would suggest below things
1. to test the azure VM to azure VM test to eliminate any environment specific bottleneck.
2. can you please refer to article
http://social.msdn.microsoft.com/Forums/windowsazure/en-US/e477e6a1-eb8b-43f7-8089-6837ae3ee34c/start-a-script-on-azure-vm-from-a-remote-machine?forum=WAVirtualMachinesforWindows and see that the remote session is setup correctly.
If these suggestions do not help, I would request you to open a ticket with our support team because it might require more invasive troubleshooting.
Best Regards
Lalitesh

TF215097: An error occurred while initializing a build for build definition : Could not establish trust relationship for the SSL/TLS secure channel

Hello,
We are facing an issue when triggering a new build using TFS 2013 Update 4, VS2013 Update 4 using TFVCTemplate.12.XAML template. All our other older build definitions just work fine but not the TFVCTemplate.12.XAML. It seems to me that some certificate
might be invalidated. Can anyone please point me in the right direction?
Thanks,
Mitul
TF215097: An error occurred while initializing a build for build definition :
Exception Message: One or more errors occurred. (type AggregateException)
Exception Stack Trace: at System.Threading.Tasks.Task`1.GetResultCore(Boolean waitCompletionNotification)
at Microsoft.TeamFoundation.Build.Client.FileContainerHelper.GetFile(TfsTeamProjectCollection projectCollection, String itemPath, Stream outputStream)
at Microsoft.TeamFoundation.Build.Client.FileContainerHelper.GetFileAsString(TfsTeamProjectCollection projectCollection, String itemPath)
at Microsoft.TeamFoundation.Build.Client.ProcessTemplate.Download(String sourceGetVersion)
at Microsoft.TeamFoundation.Build.Hosting.BuildControllerWorkflowManager.PrepareRequestForBuild(WorkflowManagerActivity activity, IBuildDetail build, WorkflowRequest request, IDictionary`2 dataContext)
at Microsoft.TeamFoundation.Build.Hosting.BuildWorkflowManager.TryStartWorkflow(WorkflowRequest request, WorkflowManagerActivity activity, BuildWorkflowInstance& workflowInstance, Exception& error, Boolean& syncLockTaken)
Inner Exception Details:
Exception Message: An error occurred while sending the request. (type HttpRequestException)
Exception Stack Trace: at Microsoft.VisualStudio.Services.WebApi.VssHttpRetryMessageHandler.<SendAsync>d__1.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.ConfiguredTaskAwaitable`1.ConfiguredTaskAwaiter.GetResult()
at Microsoft.VisualStudio.Services.WebApi.HttpClientExtensions.<DownloadFileFromTfsAsync>d__2.MoveNext()
Inner Exception Details:
Exception Message: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. (type WebException)Exception Stack Trace: at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
Inner Exception Details:
Exception Message: The remote certificate is invalid according to the validation procedure. (type AuthenticationException)
Exception Stack Trace: at System.Net.TlsStream.EndWrite(IAsyncResult asyncResult)
at System.Net.ConnectStream.WriteHeadersCallback(IAsyncResult ar)

Hi Mitul,
Thanks for your reply.
It’s strange, if your old build definitions can work using the same TFS Build Server, that indicate your TFS Server configuration is correct and can works. But only new build definition with default TfvcTemplate.12.xaml template cannot build successful.
Please share your TFS Server detailed environment information here. And share your
Build Service Properties dialog screenshot here.
Try to clean the Cache for TFS 2013 manually(delete the content of the folder only, not the cache folder itself):
Clean the Cache folder on Server machine. The folder path is:
C:\Program Files\Microsoft Team Foundation Server 12.0\Application Tier\Web Services\_tfs_data.
After cleaned, on Server machine, click Start and select
Run… to open the dialog box, then input iisreset.exe and click OK, wait it run completely.
Additionally, you can run the TFS 2013 Power Tools BPA to scan the installation of your TFS Server.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

WSUS Sync is not working Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. --- System.Security.Authentication.AuthenticationException: The remote

I know there are loads of posts with same issue and most of them were related to proxy and connectivity .
This was case for me as well (few months back). Now the same error is back. But I've confirmed that FW ports and proxy are fine this time around.
server is configured on http port 80
ERROR
Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid
according to the validation procedure.~~at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request). Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WSyncAction.WSyncAction.SyncWSUS
I've checked proxy server connectivity. I'm able browse following site from WSUS server
http://catalog.update.microsoft.com/v7/site/Home.aspx?sku=wsus&version=3.2.7600.226&protocol=1.8
I did telnet proxy server on the particular port (8080) and that is also fine.
I've doubt on certificates, any idea which are the certificates which we need to look? And if certificate is expired then (my guess) we won't be able open the above mentioned windows update catalog site?
Any tips appreciated !
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

Hi Lawrence ! - Many thanks for looking into this thread and replying. Appreciate your help.
Your reply ("SSL is enabled/configured, and the certificate being used is invalid
(or the cert does not exist or cannot be obtained), or the SSL connection could not be established.") is very helpful.
I've already tested CONTENT DOWNLOAD and it's working fine. WSUS Sync was also working fine for years with proxy server configured on port (8080) and WSUS server on port 80.
My Guess (this is my best guess ;)) is this something to do with Firewall or Proxy side configuration rather than WSUS. However, I'm not finding a way to prove this to proxy/firewall team. From their perspective all the required port communication open and
proxy server is also reachable. More over we're able to access internet (Microsoft Update Catalog site) over same port (8080).
Any other hints where I can prove them it's a sure shot problem from their side.
Thanks again !!
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

Getting Error The trust relationship between the primary domain and the trusted domain failed in SharePoint 2010

Hi,
SharePoint 2010 Backup has been taken from production and restored through Semantic Tool in one of the server.The wepapplication of which the backup was taken is working fine.
But the problem is that the SharePoint is not working correctly.We cannot create any new webapplication ,cannot navigate to the ServiceApplications.aspx page it shows error.Even the Search and UserProfile Services of the existing Web Application is not working.Checking
the SharePoint Logs I found out the below exception
11/30/2011 12:14:53.78 WebAnalyticsService.exe (0x06D4)        0x2D24 SharePoint Foundation         Database
8u1d High    Flushing connection pool 'Data Source=urasvr139;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Connect Timeout=15'
11/30/2011 12:14:53.78 WebAnalyticsService.exe (0x06D4)        0x2D24 SharePoint Foundation         Topology
2myf Medium Enabling the configuration filesystem and memory caches.
11/30/2011 12:14:53.79 WebAnalyticsService.exe (0x06D4)        0x12AC SharePoint Foundation         Database
8u1d High    Flushing connection pool 'Data Source=urasvr139;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Connect Timeout=15'
11/30/2011 12:14:53.79 WebAnalyticsService.exe (0x06D4)        0x12AC SharePoint Foundation         Topology
2myf Medium Enabling the configuration filesystem and memory caches.
11/30/2011 12:14:55.54 mssearch.exe (0x0864)                   0x2B24 SharePoint Server Search      Propagation Manager
fo2s Medium [3b3-c-0 An] aborting all propagation tasks and propagation-owned transactions after waiting 300 seconds (0 indexes) [indexpropagator.cxx:1607] d:\office\source\search\native\ytrip\tripoli\propagation\indexpropagator.cxx
11/30/2011 12:14:55.99 OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Topology
75dz High    The SPPersistedObject with
Name User Profile Service Application, Id 9577a6aa-33ec-498e-b198-56651b53bf27, Parent 13e1ef7d-40c2-4bcb-906c-a080866ca9bd failed to initialize with the following error: System.SystemException: The trust relationship between the primary domain and the trusted
domain failed.       at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection sourceSids, Boolean& someFailed)     at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection
sourceSids, Type targetType, Boolean forceSuccess)     at System.Security.Principal.SecurityIdentifier.Translate(Type targetType)     at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()
at Microsoft.SharePoint.Administration.SPAcl`1.Add(String princip...
11/30/2011 12:14:55.99* OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Topology
75dz High    ...alName, String displayName, Byte[] securityIdentifier, T grantRightsMask, T denyRightsMask)     at Microsoft.SharePoint.Administration.SPAcl`1..ctor(String persistedAcl)
at Microsoft.SharePoint.Administration.SPServiceApplication.OnDeserialization()     at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.OnDeserialization()     at Microsoft.SharePoint.Administration.SPPersistedObject.Initialize(ISPPersistedStoreProvider
persistedStoreProvider, Guid id, Guid parentId, String name, SPObjectStatus status, Int64 version, XmlDocument state)
11/30/2011 12:14:56.00 OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Topology
8xqx High    Exception in RefreshCache. Exception message :The trust relationship between the primary domain and the trusted domain failed.
11/30/2011 12:14:56.00 OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Timer
2n2p Monitorable The following error occured while trying to initialize the timer: System.SystemException: The trust relationship between the primary domain and the trusted domain failed.       at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection
sourceSids, Boolean& someFailed)     at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection sourceSids, Type targetType, Boolean forceSuccess)     at System.Security.Principal.SecurityIdentifier.Translate(Type
targetType)     at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()     at Microsoft.SharePoint.Administration.SPAcl`1.Add(String principalName, String displayName, Byte[] securityIdentifier, T grantRightsMask,
T denyRightsMask)     at Microsoft.SharePoint.Administrati...
11/30/2011 12:14:56.00* OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Timer
2n2p Monitorable ...on.SPAcl`1..ctor(String persistedAcl)     at Microsoft.SharePoint.Administration.SPServiceApplication.OnDeserialization()     at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.OnDeserialization()
at Microsoft.SharePoint.Administration.SPPersistedObject.Initialize(ISPPersistedStoreProvider persistedStoreProvider, Guid id, Guid parentId, String name, SPObjectStatus status, Int64 version, XmlDocument state)     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.GetObject(Guid
id, Guid parentId, Guid type, String name, SPObjectStatus status, Byte[] versionBuffer, String xml)     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.GetObject(SqlDataReader dr)     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.RefreshCache(Int64
currentVe...
Please guide me on the above issue ,this will be of great help
Thanks.

I have same error. Verified for trust , ports , cleaned up cache.. nothing has helped.
The problem is caused by User profile Synch Service:
UserProfileProperty_WCFLogging :: ProfilePropertyService.GetProfileProperties Exception: System.SystemException:
The trust relationship between the primary domain and the trusted domain failed.       at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection sourceSids,
Boolean& someFailed)     at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection sourceSids, Type targetType, Boolean forceSuccess)     at System.Security.Principal.SecurityIdentifier.Translate(Type
targetType)     at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()     at Microsoft.SharePoint.Administration.SPAcl`1.Add(String principalName, String displayName, SPIdentifierType identifierType, Byte[]
identifier, T grantRightsMask, T denyRigh...
08/23/2014 13:00:20.96*        w3wp.exe (0x2204)
        0x293C        SharePoint Portal Server              User Profiles
        eh0u        Unexpected        ...tsMask)     at Microsoft.SharePoint.Administration.SPAcl`1..ctor(String persistedAcl)
at Microsoft.Office.Server.Administration.UserProfileApplication.get_SerializedAdministratorAcl()     at Microsoft.Office.Server.Administration.UserProfileApplication.GetProperties()     at Microsoft.Office.Server.UserProfiles.ProfilePropertyService.GetProfileProperties()
Please let me know if you any solution found for this?
Regards,
Kunal

Office Web Apps 2013 + could not establish trust relationship

We currently have a three tier SharePoint 2013 Farm:
1. Web Front End Server (Server 2008 R2 Enterprise) - Servername: TEST2SP013.domain.dom
2. Central Admin Server (Server 2008 R2 Enterprise) - Servername: TEST2SPCA013.domain.dom
3. SQL Server (Server 2012 Datacenter) - Servername: TESTSQL012.domain.dom
All Machines are in the same IP/Subnet.
We are trying to setup a new server (Server 2012 R2 Datacenter) (Servername: TEST022.domain.dom) to run Office Web Apps 2013 in our TEST environment to test the system before rolling in production and have had issues throughout the entire process.
The technet articles we have used are:
http://technet.microsoft.com/en-us/library/jj219435.aspx
http://technet.microsoft.com/en-us/library/ff431687.aspx
http://technet.microsoft.com/en-us/library/jj219627.aspx
We finally have what I thought was a correct setup but anytime we try to edit or view a word, excel, powerpoint document within SharePoint 2013, we receive "Sorry, there was a problem and we can't open this document. If this happens again, try opening
the document in Microsoft Word."
We found a few How-To Setup Office Web Apps sites where other people provided step-by step instructions:
blogs.msdn.com/b/sowmyancs/archive/2012/10/29/install-configure-amp-monitor-office-web-apps-2013-for-sp-2013.aspx
http://www.wictorwilen.se/office-web-apps-2013-securing-your-wac-farm
http://blogs.technet.com/b/justin_gao/archive/2013/06/30/configuring-office-web-apps-server-communication-using-https.aspx
We reviewed the ULS logs and found the following error:
02/14/2014 13:38:40.24 w3wp.exe (0x1C04)                       0x1BB4 Office Web Apps
WAC Hosting Interaction       adhsk Unexpected WOPI CheckFile: Catch-All Failure [exception:Microsoft.Office.Web.Common.EnvironmentAdapters.UnexpectedErrorException: HttpRequest failed ---> Microsoft.Office.Web.Apps.Common.HttpRequestAsyncException:
No Response in WebException ---> System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate
is invalid according to the validation procedure.     at System.Net.TlsStream.EndWrite(IAsyncResult asyncResult)     at System.Net.ConnectStream.WriteHeadersCallback(IAsyncResult ar)     --- End of
inner exception stack trace ---     at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)     at Microsoft.Office.Web.Apps.Common.Ht... 7bed0d51-511d-4541-a059-e2f72942e617
None of the article provide specific step-by-step instructions with using HTTPS in a test environment specifically when it comes to Self-Signed Certs through Active Directory Certificate Services.
We tried creating a Self-Signed Cert through IIS on the Office Web Apps Box which did not work.
We tried creating a Cert through Active Directory Certificate Services which did not work.
We tried adding the Cert through Central Admin > Security > Manage Trust which did not help.
We verified "get-spwopizone" is set to internal-https
We can access the Web Apps https://test022/hosting/discovery site and view the XML with no issue on any machine on our network.
We added our domain to the list of approved domains that can use Office Web Apps as well as add "Domain Users" as the security group that can "EDIT" Office Documents through Office Web Apps.
After each step, we tried performing either a system reboot or IIS Reset on the Office Web Appcs and WFE box.
My Question is how do we generate a certificate (either self-signed through IIS on the Office Web Apps Box or through AD) that will allow this application to work? I read that the Fully Qualified Domain Name needs to be in the SAN field of the Cert but when
we request it, I have no way of entering this information. I tried following http://technet.microsoft.com/en-us/library/ff625722 to manually request a certificate with a Custom SAN but that did not work either.
I am assuming the certificate issue is with the New Office Web Apps box. Is this correct?
-Chris

If internal cert then you will have to add certificate from OWA to tursted certificates in each sharepoint server plus add the certificate from central admin in Sharepoint through manage trust. Also you will need to install p7b file (file that contains
path to root certificate to verify each intermediate certificate) for internal cert to each sharepoint server to not get certificate error.
sachin

Reporting services with R2 on DPM2012 - Could not establish trust relationship for the SSL/TLS secure channel

Hi everyone,
A somewhat similar question has been asked before by others but none of the answers given has helped me.I am attempting a DPM 2012 installation, which is failing at the "deploying reports" stage.My analysis of logs seems to point me in the direction of an SSL
error, which does not make sense since the configuration files say SSL is disabled (or at least, should be).
Here are the symptoms:
1.I am able to browse http://FQDN/Reports_MSDPM2012 folder from internet explorer
2.I am also able to browse http://FQDN/ReportServer_MSDPM2012 from internet explorer
3.The information given in the logs and relevant config files is shown below:
<<RSREPORTSERVER.CONFIG>>
<ConnectionType>Default</ConnectionType>
<LogonUser></LogonUser>
<LogonDomain></LogonDomain>
<LogonCred></LogonCred>
<InstanceId>MSRS10_50.MSDPM2012</InstanceId>
<InstallationID>{d9b1c335-5842-4a81-9148-79184c38bf09}</InstallationID>
<Add Key="SecureConnectionLevel" Value="0"/>
<Add Key="CleanupCycleMinutes" Value="10"/>
<Add Key="MaxActiveReqForOneUser" Value="20"/>
<Add Key="DatabaseQueryTimeout" Value="120"/>
<Add Key="RunningRequestsScavengerCycle" Value="60"/>
<Add Key="RunningRequestsDbCycle" Value="60"/>
<Add Key="RunningRequestsAge" Value="30"/>
<Add Key="MaxScheduleWait" Value="5"/>
<Add Key="DisplayErrorLink" Value="true"/>
<Add Key="WebServiceUseFileShareStorage" Value="false"/>





<Add Key="WatsonFlags" Value="0x0428"/>
<Add Key="WatsonDumpOnExceptions"
4.The DPM log file still appears to be using SSL even though i used reporting services configuration to remove SSL bindings:
running.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException: exception ---> Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ReportDeploymentException:
exception ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.WebException: The underlying connection was closed: Could
not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException:
The remote certificate is invalid according to the validation procedure.
at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest,
Exception exception)
5:I do have an SCCM site on the default web site used by SMS clients but on different ports
I am stumped.Somebody please give some advice
Thank you

Hi
This is an old post but did you come right?

SSRS Report Server Could not establish connection. The underlying connection was closed. Could not establish trust relationship for the SSL/TLS Secure channel

Hi
Had to un-install and then re-install MS SQL Server 2012 with SSRS.
After we re-installed we are able to get to the Web Services page but not the Report Server page and get the above error message. We need to use SSL and when we bind the cert in RS Configuration Manager it says it does this successfully on the WebServices
tab. We also do a similar exercise on the ReportServer page.
Any help warmly welcomed :D
Thanks

Hi Rich Whight,
According to your description, after you re-installed SQL Server 2012 with SSRS, you are able to access Web Service URL, but when you tried to access Report Manager URL, the error occurred: The underlying connection was closed. Could not establish trust
relationship for the SSL/TLS Secure channel.
The issue may be caused when the certificate isn't installed correctly in the trusted root for the local computer. To verify and install the certificate, Please refer to the steps blow:
In RsReportServer.config file(default location: C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer), change the “SecureConnectionLevel” element value from 0 to 3.
Add correct value to <UrlRoot> element.
Add the same value to the <ReportServerUrl> element as step2.
Go to Microsoft management Console, add the certificate which you use to access the report server under “Trusted Root Certification Authorities”.
For more information about SSL configuration and Managing Trusted Root Certificates, please refer to the following documents:
http://blogs.msdn.com/b/mariae/archive/2007/12/12/ssl-configuration-and-reporting-services.aspx
http://technet.microsoft.com/en-us/library/cc754841.aspx
If you have any more questions, please feel free to ask.
Best Regards,
Wendy Fu

Can't establish trust relationship for VM hosted SSRS Service

We are developing an Azure application that requires SSRS for report generation. Currently we are using the Azure SSRS service, and that is working great. Unfortunately, Microsoft is discontinuing that service this fall. So we have two options -- use a VM
with SSRS or switch to some other reporting product. For testing the latter approach I have set up a vm with SSRS over SSL. I created a self-signed certificate on the vm (xxx.cloudapp.net) and set it up to allow access from any IP
for testing. I installed this cert on my dev box (computer account in both personal and trusted authority). I am able to access https://xxx.cloudapp.net/ReportServer and .../Reports
from my local browser. I can generate reports without problems.
However, after uploading the xxx.cloudapp.net certificate to my cloud service, I find that service is unable to access SSRS. I get the error: "The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure
channel." I'm guessing that the vm knows it has the certificate, but doesn't trust the source authority. I can't find any way in the Cloud Service UI to change that.
So, summarizing, the SSRS can be accessed remotely via SSL if I install the cert on my local machine. But I can't get the cloud service to work when I do that. What do I need to do? I'm not crazy about setting up a production vm with a
non-cloudapp.net name and going to a certificate authority to get a certificate just to test. And I don't know if that would work any better.
Any advice will be greatly appreciated.
Thanks,
Terry
TerryL

Hi Jambor:
I have already installed the self-signed certificate in personal for the local machine, also in the trusted root certification authority section. I am using the instructions at
http://msdn.microsoft.com/en-us/library/dn449661.aspx in the section labeled "To use the Virtual Machines Self-signed Certificate". If I install the certificate on my local
machine in both the personal and the trusted authority section, I am able to deploy to SSRS via https. I can also browse to
https://xxx.cloudapp.net/Reports and generate reports. Therefore I think the VM and SSRS are OK.
I believe my problem comes when I try to call the SSRS service from a free-standing Azure cloud service unrelated to my vm. I can import the certificate to the cloud service, but there is no way in the UI to tell the cloud service to trust my xxxx.cloudapp.net
certificate authority. I imagine there is a vm sitting underneath, but I can't access it to add the certificate to make xxx.cloudapp.net a trusted CA. Consequently, when my cloud service tries to access the SSRS cloud service on the vm, I get the
error "The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel."
The trusted CA idea is just my theory. When I use Azure's soon-to-be-discontinued SSRS service via https it works fine with no certificate.
There has to be a way to make this work, but I can't figure it out.
Thanks,
Terry
TerryL

Error 12703 VMM cannot establish a trust relationship SSL/TLS V2V

Similar Messages

Maybe you are looking for