Error 13010: Deleting Genius file doesn't work

I recently encountered a problem starting up iTunes and was presented with the error 13010. I searched for a fix to the problem and came across a thread with a solution that would supposedly help me. After following a bit of advice that seemed to have helped a lot of people (which is deleting the iTunes Library Genius.itdb file) I found that it did nothing for me, for as soon as i tried to launch iTunes it would immediately recreate that same file and come up with the same error. I guess I'm just looking for an alternative answer.
Thanks,
Charles

Charles,
is your signature correct? Mac OS X (10.6.8)? If you are running Lion or Mt. Lion, log off and on again, after quitting iTunes, before you remove the iTunes Library Genius.itdb file. Otherwise you cannot be sure, that iTunes really quits, and it may just recreate the file with the old content when you launch the program again.
Regards
Léonie

Similar Messages

ITunes Error 13010 - Deleting Genius.itdb didn't work

So I just updated itunes to 10.5.2 and I have 2 libraries. One isn't working. I keep trying to delete the genius.itdb file and it just keeps reappearing. I reinstalled itunes numerous times, restarted the computer. It hasn't fixed the issue. Can someone help me.

Charles,
is your signature correct? Mac OS X (10.6.8)? If you are running Lion or Mt. Lion, log off and on again, after quitting iTunes, before you remove the iTunes Library Genius.itdb file. Otherwise you cannot be sure, that iTunes really quits, and it may just recreate the file with the old content when you launch the program again.
Regards
Léonie

Error while deleting a file which is in a folder which inturn in workspace

12:20:42.309 DELETE (FAILED: Conflict [(pre||post)-condition failed: x:concurrency-lock-denied]) Hello.java   (C:\CFolder1\WSF1\WSF2\Dev\HelloWorld\Package\Hello.java)
--- Problem summary: ---
12:20:42.309 DELETE (FAILED: Conflict [(pre||post)-condition failed: x:concurrency-lock-denied]) Hello.java   (C:\CFolder1\WSF1\WSF2\Dev\HelloWorld\Package\Hello.java)
I am getting above error while deleting a file which is in a folder which inturn in workspace

Here is the problem I have with deleting my folder. I had created a WD project TaxTool and and added the DC to my SC. There were obviously some checkedout activities. Being new to this, I deleted the project directly without checking in the activities. Now I have folder TaxTool/_comp with nothing underneath on the DTR server and on my client. I am unable to checkout TaxTool for delete but the checkout of _comp folder fails in NWDS with the following error:
<b>EDIT (FAILED: server response: Conflict [(pre||post)-condition failed: x:no-exclusivity-with-existing-checked-out-resources]) comp   (C:\JDI\JDIDEMO1\intelJDI_TEST\dev\inactive\DCs\intel.com\TaxTool\_comp\)</b>
If I try the same from the DTR shell, I get this following error:
<b>Unexpected problem occurred during executing command.Lockfile "C:\Documents and
Settings\bvedamur\.dtr\.syncdbs\5b0d8b2110a7a29883734c0407462df8.syncdbM.lock" is already in use by another process.</b>
I am the only user in the system (doing R&D) and I have tried Sync and Delete. Nothing works. Help appreciated.
Thx
Bhaskar

JSP referencinc taglib.tld in JAR file doesn't work.

I have some custom tags which work fine under Weblogic 5.1 when I do a
          normal deployment of files, including the taglib.tld. However, when I
          try to reference the taglib.tld located in a JAR file, then weblogic
          throws an error saying that it cannot resolve into a valid tag library.
          I am only doing this because I am testing the same site agains both
          iPlanet Web Server and Weblogic. iPlanet will only find the taglib.tld
          when it is in a JAR file.
          Can anyone shed some light on referencing the taglib.tld in a JAR file.
          This should work, as it is covered in the JSP 1.1 specification.
          FYI - the jar file is in the same location as the JSP which references
          it. The URI to the JAR file (in the JSP) is from the root of the site.
          Thanks for any help.
          -Scott Edwards


Welcome to the Sun forums.
Subject: My Applet Jar file doesn't work !! .
1) Note that one '!' denotes exclamation, whereas 2 or more often denotes a dweeb.
2) Since you are on your first post, I will point out that applets are an advanced topic, and should not be attempted by newbies.
3) "doesn't work" is very vague. It is likely to produce a reply like "maybe the applet is lazy - try flogging it".
Amera wrote:
..I have written this java applet :When posting code, code snippets, HTML/XML or input/output, please use the code tags. The code tags help retain the formatting and indentation of the sample. To use the code tags, select the sample and click the CODE button.
Also note that the most preferred form of code is an SSCCE *(<- link).* In an SSCCE, your would remove all but one button (if the actionPerformed fails with 6 or 7 buttons, trim it down to fail with just one or two.
i made a jar file :So does the applet work before you make the Jar file? Your post so far suggests the Jar file is the problem.
i created a file and named it MANIFEST.MF .i wrote inside it :
Main-Class: test
Then i placed it in a folder with the test.class .I created jar file using command line.
I entered the test.class path and then wrote this command :
jar cvfm myjar.jar MANIFEST.MF *.class
Then the jar file "myjar.jar" is created .
it's executed but this function "public void actionPerformed(ActionEvent e) " won't wrok.
i keep pressing the buttons but nothing is happening !!So you get 'no output in the console & no effect in the applet'?
What is the URL where I can see your applet failing?
As an aside, since Sun does not guarantee that applet clients will act on the showDocument command, even if it does not work, it would not be a 'bug'.
Edited by: AndrewThompson64 on Dec 28, 2009 11:18 AM

My Applet Jar file doesn't work !!

hello ,
I have written this java applet :
import java.awt.*;
import javax.swing.*;
import java.applet.Applet;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.net.URL;
public class test4 extends Applet implements ActionListener{
     private static final long serialVersionUID = 1L;
     private JButton B1 =new JButton("Forward ");
     private JButton B2 =new JButton("Backward");
     private JButton B3 =new JButton("Left");
     private JButton B4 =new JButton("Right");
private JPanel P1 = new JPanel();
private JPanel P2 = new JPanel();
private JPanel P3 = new JPanel();
private JPanel P4 = new JPanel();
private JPanel P5 = new JPanel();
private JPanel P6 = new JPanel();
private JLabel L3 = new JLabel(" ");
private JLabel L4 = new JLabel(" ");
private JLabel L5 = new JLabel(" ");
private JLabel L6 = new JLabel(" ");
private JLabel L7 = new JLabel(" ");
JSplitPane sppSplitPane0 = new JSplitPane( );
     public test4()
          JFrame.setDefaultLookAndFeelDecorated(true);
          sppSplitPane0.setDividerLocation( 250 );
          P3.add(L4);
          P3.add(B1);
          P3.add(L5);
          P5.add(B3);
          P5.add(L3);
          P5.add(B4);
          P4.add(L6);
          P4.add(B2);
P4.add(L7);
          P1.setLayout(new BorderLayout());
          P1.add("North",P3);
          P1.add("Center",P5);
          P1.add("South",P4);
          P2.setLayout(new BorderLayout());
          P2.add("North" , P1);
          B1.addActionListener(this);
          B2.addActionListener(this);
          B3.addActionListener(this);
          B4.addActionListener(this);
          sppSplitPane0.setLeftComponent(P2);
          sppSplitPane0.setRightComponent(P6);
     public void actionPerformed(ActionEvent e) {
          try {
               if (e.getSource() == B4) {
          URL myNewURL = new URL("http://amera/cgi-bin/test.cgi?R");
          System.out.println("URL = " + myNewURL);
          getAppletContext().showDocument(myNewURL,"blank");
               else
                    if (e.getSource() == B3) {
                    URL myNewURL = new URL("http://amera/cgi-bin/test.cgi?L");
                    System.out.println("URL = " + myNewURL);
                    getAppletContext().showDocument(myNewURL,"blank");
                    else
                         if (e.getSource() == B2) {
                         URL myNewURL = new URL("http://amera/cgi-bin/test.cgi?B");
                         System.out.println("URL = " + myNewURL);
                         getAppletContext().showDocument(myNewURL,"blank");
                         else {
                              URL myNewURL = new URL("http://amera/cgi-bin/test.cgi?F");
                              System.out.println("URL = " + myNewURL);
                         getAppletContext().showDocument(myNewURL,"blank");
          } catch (Exception err) {
          System.err.println("Error!\n" + err);
          showStatus("Error, look in Java Console for details!");
     public static void main(String[] args) {
          test t=new test();
          JFrame frame =new JFrame();
          frame.add(t.sppSplitPane0);
          frame.setSize(1100,700);
          frame.setVisible(true);
i made a jar file :
i created a file and named it MANIFEST.MF .i wrote inside it :
Main-Class: test
Then i placed it in a folder with the test.class .I created jar file using command line.
I entered the test.class path and then wrote this command :
jar cvfm myjar.jar MANIFEST.MF *.class
Then the jar file "myjar.jar" is created .
it's executed but this function "public void actionPerformed(ActionEvent e) " won't wrok.
i keep pressing the buttons but nothing is happening !!
please help me .
Edited by: Amera on Dec 27, 2009 2:51 PM

Welcome to the Sun forums.
Subject: My Applet Jar file doesn't work !! .
1) Note that one '!' denotes exclamation, whereas 2 or more often denotes a dweeb.
2) Since you are on your first post, I will point out that applets are an advanced topic, and should not be attempted by newbies.
3) "doesn't work" is very vague. It is likely to produce a reply like "maybe the applet is lazy - try flogging it".
Amera wrote:
..I have written this java applet :When posting code, code snippets, HTML/XML or input/output, please use the code tags. The code tags help retain the formatting and indentation of the sample. To use the code tags, select the sample and click the CODE button.
Also note that the most preferred form of code is an SSCCE *(<- link).* In an SSCCE, your would remove all but one button (if the actionPerformed fails with 6 or 7 buttons, trim it down to fail with just one or two.
i made a jar file :So does the applet work before you make the Jar file? Your post so far suggests the Jar file is the problem.
i created a file and named it MANIFEST.MF .i wrote inside it :
Main-Class: test
Then i placed it in a folder with the test.class .I created jar file using command line.
I entered the test.class path and then wrote this command :
jar cvfm myjar.jar MANIFEST.MF *.class
Then the jar file "myjar.jar" is created .
it's executed but this function "public void actionPerformed(ActionEvent e) " won't wrok.
i keep pressing the buttons but nothing is happening !!So you get 'no output in the console & no effect in the applet'?
What is the URL where I can see your applet failing?
As an aside, since Sun does not guarantee that applet clients will act on the showDocument command, even if it does not work, it would not be a 'bug'.
Edited by: AndrewThompson64 on Dec 28, 2009 11:18 AM

Jar file doesn't work

I am quite new to java so I hope my question is not stupid.
I used bluej to realize an application.It works when executing the main method in bluej,but when I create the jar file,it simpy doesn't work.I have included the main class when creating the jar file.When double-clicking on the jar file, it makes the typical error sound of windows,but it doesn't show any message.
What is the problem?

Welcome to the Sun forums.
Subject: My Applet Jar file doesn't work !! .
1) Note that one '!' denotes exclamation, whereas 2 or more often denotes a dweeb.
2) Since you are on your first post, I will point out that applets are an advanced topic, and should not be attempted by newbies.
3) "doesn't work" is very vague. It is likely to produce a reply like "maybe the applet is lazy - try flogging it".
Amera wrote:
..I have written this java applet :When posting code, code snippets, HTML/XML or input/output, please use the code tags. The code tags help retain the formatting and indentation of the sample. To use the code tags, select the sample and click the CODE button.
Also note that the most preferred form of code is an SSCCE *(<- link).* In an SSCCE, your would remove all but one button (if the actionPerformed fails with 6 or 7 buttons, trim it down to fail with just one or two.
i made a jar file :So does the applet work before you make the Jar file? Your post so far suggests the Jar file is the problem.
i created a file and named it MANIFEST.MF .i wrote inside it :
Main-Class: test
Then i placed it in a folder with the test.class .I created jar file using command line.
I entered the test.class path and then wrote this command :
jar cvfm myjar.jar MANIFEST.MF *.class
Then the jar file "myjar.jar" is created .
it's executed but this function "public void actionPerformed(ActionEvent e) " won't wrok.
i keep pressing the buttons but nothing is happening !!So you get 'no output in the console & no effect in the applet'?
What is the URL where I can see your applet failing?
As an aside, since Sun does not guarantee that applet clients will act on the showDocument command, even if it does not work, it would not be a 'bug'.
Edited by: AndrewThompson64 on Dec 28, 2009 11:18 AM

Read From Binary File doesn´t work on MCB2400 in LV2009 Embedded ARM

Hello,
I try to read a Binary File from SD-Card on my MCB2400 Board with LV2009 Embedded for ARM.
But the output is always 0, if I use my VI on the MCB2400. If use the same VI on the PC it works fine with the same binary file.
The
access to the SD-Card on the MCB2400 works in other cases finde, if I
try to read from a text-file it works without any problems.
Are thre any constraints for the "Read From Binary File"-Node in Embedded in comparison to the same node on PC ?
I have noticed that there is also a problem
with the reading of textfiles. If the sice of the file is about 100Byte
it doesn´t work anymore, too. I can´t understand it, because I read
always just one Byte. And even if the implementation in Labview is so
bad that it allways reads the total file in the ram it sould work. The
MCB2400 has 32MegaByte RAM, so 100Byte or even a few MegaByte should
work.
But this doesn´t seem to be the Problem for the Binary-Problem. Because even a 50byte Binary-File doesn´t work.
bye & thanks
amin
Solved!
Go to Solution.
Attachments:
SD_Card_Read-test.vi ‏12 KB

Hello,
thank you for your Help.
But I just want to read a Binary File, which is build by another program. And this is coded with 8Bit (like a normal Binary File) and not just with 7Bit (ASCII). So the workaround doesn't work in my case.
I posted the Test-VI in my first post (here once again as picture). And it works fine on the PC, but if I try it on my MCB2400 the "Read Form Binary File" Node doesn't work.
And it is also possible to open the Bin file with the "Read Text File" Node and see the cryptic content of the Bin-File. So the Problem seems to be in the "Read Form Binary File" Node.
bye & thanks again
amin
Message Edited by aminat on 09-30-2009 03:28 AM

Examine and repair iphoto library files doesn't work?

examine and repair iphoto library files doesn't work?

As a Test:
In the Source account - create a new library and try share it instead.
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

ITunes genius mix doesn't work properly

Hi everybody,
On my late 2006 iMac with iTunes10 Genius Mix doesn't work properly.
After having activated Genius iTunes generates a number of mixes with different music styles.
When I scroll over the squares the play sign shows up, but only work for 1 of the 9 mixes when I click the play sign.
Clicking on the other play signs in the other squares does not do anything.
Does anybody know what is wrong here?
Thanks!
PT

I now know what is causing the problem, at least for the singer in question, but I don't know how to overcome it. I now know that the problem started when I downloaded an MP3 album from Amazon. This album contains 25 songs sung by 25 singers, INCLUDING Annette Hanshaw,THE SINGER I'M INTERESTED IN AT THE MOMENT. So, when I do an iTunes' search for Annette Hanshaw, I get her, but I also get all the other singers on this album. This puzzles me. I've downloaded many entire albums, but I've never run into the unwanted linkages before. In other words, I want to keep all of the songs in the album I just downloded, but I only want Annette Hanshaw when I put her name in the SEARCH bar. Is there a way to do this?
Are all the songs in all Amazon MP3 albums linked together in this way?

How do I permanently delete photos? I am running Yosemite 10.10.2 and have tried shift cmd delete and that doesn't work.

How do I permanently delete photos? I am running Yosemite 10.10.2 and have tried shift cmd delete and that doesn't work.

Deleting Photos from an iPhoto Library
1 - from an Event or the Photos mode: select the photo(s) and use the Delete key to move the photos to the trash bin. Then empty the iPhoto Trash bin as follows:
2 - from an album, smart album, book, slideshow, card, etc.: select the photo(s) and use the key combination of Command+Option+Delete to move the photos to the trash bin. Then empty the trash bin as above.
NOTE: deleting a photo from an album, slideshow, book, etc., with only the Delete key only deletes that photo from that item. Deleting a photo from an Event deletes ALL occurences of that photo in the library.

I keep getting a runtime error, tried reinstalling itunes still doesn't work. R6034 ituneshelper.exe. Any ideas on what to do?

I keep getting a runtime error, tried reinstalling itunes still doesn't work. R6034 ituneshelper.exe. Any ideas on what to do?

Hi Hamshow,
Thanks for using Apple Support Communities. This article has steps you can take for the error you're seeing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari

Hallo My system runs slow. how can i reorganize the date, that the pc runs faster? In the window world i hade to delete some fils. how it work in the apple world?

Hallo My system runs slow. how can i reorganize the date, that the pc runs faster? In the window world i hade to delete some fils. how it work in the apple world?

See these:
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac,
Mac OS X keyboard shortcuts,
Anatomy of a Mac,
MacTips,
Switching to Mac Superguide, and
Switching to the Mac: The Missing Manual, Mountain Lion Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist,
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.
Once you get familiar with the Mac, see:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
How to Speed up Macs, ,
Macintosh OS X Routine Maintenance,
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X,
Five Mac maintenance myths and
Myths of required versus not required maintenance for Mac OS X for information.

Why does iTunes create disk errors when deleting movie files?

I use a Macbook Pro, OSX 10.7.5. When I delete movie file from my iTunes library I get disk errors. I need to option boot select the recovery disk and repair the disk. Deleting a movie file I have placed on my desktop with finder does not create any errors. Most of the movie files are created as .m4v movies. They all play just fine with my Apple TV. I have tried turning off the Apple TV and rebooting before I delee files but nothing seems to work.
Any ideas?
Lance

If you let iTunes organise your media folders then that is the way it is. An option would be to change the Media Kind to TV Show which would gather them togther in one folder, but in a different part of the library.
tt2

Converting a Keynote document to Powerpoint file doesn't work

I tried to convert Keynote documents to PowerPoint files that can be viewed and edited by PowerPoint users on Windows or Mac OS computers. All I got was a error. Can any one tell me how to make this work.I did every thing that was in the instructions.
To create a PowerPoint slideshow:
Choose File > Export and then click PowerPoint.
Click Next.
Type a name and choose a location for the file, and then click Export.

Hy Kyn, thank you for answering.
Every slide on my presentation has animated objekts. And every slide is linked (by hyperlink) to every slide on the presentation. So I want to give the user the chance to interrupt and to go to next slide. Therefore is an arrow to klick on, which has a hyperlink to next side (or do go to start, or to go back) - during the slide-animation is working.
That works fine in keynote, but it doesn't work after the export in QT. In QT it is not possible to interrupt the sequence of the animation. When the sequence is (performed) finalized, the klick on the arrow works, and I can go to next slide.
But interruption is not pssible.
Tanks in advance for your answer!
Best regards - Renate

File Adapter gets error while deleting the file

Hi,
We are running on PI 7.0 SP6. I built a simple integration scenario where a file is picked up from a certain directory on the server (PI server itself) and get processed according to some mapping rules and again put to an other directory. I used the file adapter for picking and putting the file with 2 different communication channels.
My integration works fine. File is picked up processed and put into its new location.
But the file adapter cannot work in archiving or deletion mode. So the file (to be picked up by PI) remains in its original location.
I am getting the following error:
Applications/ExchangeInfrastructure/AdapterFramework/Services/ADAPTER/ADMIN/File##com.sap.aii.adapter.file.File2XI.deleteFile(FileHandle)#J2EE_GUEST#0####18a971f3338011dbcde800145e69a8d4#XI AF File2XI[:EBI:File_from_EBI_to_EXS]##0#0#Error#1#com.sap.aii.adapter.file.File2XI#Java###Deleting of file failed - cannot proceed#1#E:
SCENARIOS
EBITOEXS
RFID
GELEN
tagdata22082006035719.xml#
#1.5#00145E69A8D4005B0000004700000A6400041BC49A1D56D3#1156431120046#/Applications/ExchangeInfrastructure/AdapterFramework/Services/ADAPTER/ADMIN/File##com.sap.aii.adapter.file.File2XI.processFileList()#J2EE_GUEST#0####18a971f3338011dbcde800145e69a8d4#XI AF File2XI[:EBI:File_from_EBI_to_EXS]##0#0#Error#1#com.sap.aii.adapter.file.File2XI#Plain###File 'E:
SCENARIOS
EBITOEXS
RFID
GELEN
tagdata22082006035719.xml' - deleting after processing failed - retry#
I tried everything but upgrading to a higher SP level and will do so unless anyone has an other suggestion.
Thanks a lot,
Murat Gölcü
[email protected]

Hi,
These are a few things you can do:
Check the permissions of the folder where the file is being Placed. (it will mostly have only read permission, this is what i could understand from your explanation)
If you are doing Content conversion, please can you just remove it and see if the XML file is getting generated.
Also, please check if it's picked up by any other application when you place it on the server.
Regards,
Abhy

Error 13010: Deleting Genius file doesn't work

Similar Messages

Maybe you are looking for