Error 13019 while adding music

My ipod touch started showing error 13019 error message and it doesn't let me add the song. How can I fix it without deleting all my music on it?

Try here:
iTunes: Error 13019 during sync

Similar Messages

No internet while wifi is ok, error 13019 during sync, music cutting off...

Hi!
Up until yesterday, everything was fine in the land of my iPod, but all of a sudden
1) I lost internet access, wherever I try to connect
2) I tried an update today, all syncs fail with error 13019.
3) Music playback keeps shutting off randomly
4)any attempt to reinstall itunes for Windows 7 is met with a 64 bit etc error
I am seriously getting cheesed off with all this and have lost track of the number of times I have restarted the whole lot, cleared all wifi settings, renewed the lease etc etc.
Please help!
Thanks

Error 13019 Seems to be a serious issue. Does anyone have any other info besides what apple posted in the article that is referenced every time someone says 13019 error. That article is bogus! The only thing I have found that works is to restore my phone. It ***** and takes forever.
If the error was truly from a corrupt music file then after a restore, when I sync back all my music and podcasts I would still get the error. Seems to be a system problem with iOS4 that someone needs to get on right away.
Until then. Just restore your phone and wait.

Time Machine error message while restoring..."an error occurred while adding a recovery system to the destination disk

I had to change my hard drive in my MBP 15". I use Time Machine on a Time Capsule for backup. I am booting up my laptop with a bootable USB key. I have partitioned my new hard drive (bigger than the old one) and named it Macintosh HD (same as the old one). I select the option to restore from Time Machine Backup. I select one of my latest backup....select my destination drive...the restore process starts but stop within minutes with the following message. "An error occurred while adding a recovery system to the destination disk" It then prompts me to restart....
I need your help...what can it be.
Thanks

I've encountered this issue when the Time Machine was encrypted with FileVault.
Article: HT4718
Additional Information
Please note that OS X Recovery must be present on the computer's startup volume in order to use FileVault 2. Using RAID partitions or a non-standard Boot Camp partition on the startup disk may prevent OS X from installing a local Recovery system. See "OS X: Some features of Mac OS X are not supported for the disk (volume name)" for more information.
What seems to work, is reinstalling the OSX from the internet, and then using migration assistant to pull the user from the time machine backup external when logged into a temporary administrator user to move the original user back over.
Perhaps if you're stubborn, what would work is the following from the same article:
What to do if the installer warns that no Recovery System can be created
Some disk partition configurations may result in the OS X installer reporting that it could not create a Recovery System. In these situations, even if you are permitted to continue the install, you may want to quit the installation and create an external, bootable OS X hard drive with a Recovery System, first. You can continue your OS X upgrade on your computer's startup drive after creating an external Recovery System.
Your storage device must have at least 13 GB available (after formatting) to install OS X Lion or later and a Recovery partition.
These steps erase and reformat the storage device. This article instructs you on setting up a storage device to use the GUID partition scheme and the Mac OS Extended (Journaled) format, which are required to install OS X and a Recovery partition on your external storage device. You should back up any important files that are on the device to a different drive.
This procedure installs a version of OS X that is compatible with the Mac it was created with. Using this OS X system with a different Mac model may produce unpredictable results.
Your computer's serial number is sent to Apple as part of this process to help authenticate your request to download and install OS X Lion.
All of this information was collected by browsing through the public articles on the Apple Support website.

Error Message while adding Item in Item Master Data- [Microsoft][SQL Server Native Client 10.0][SQL Server]Conversion failed when converting the nvarchar value 's008 01' to data type int. (CINF)

Dear Experts
I am getting the following error message while adding item in Item Master data. I have modified the following SBO_SP_transactionNotification in SQL server after that could not able to add the item
ALTER proc [dbo].[SBO_SP_TransactionNotification]
@object_type nvarchar(20),                      -- SBO Object Type
@transaction_type nchar(1),               -- [A]dd, [U]pdate, [D]elete, [C]ancel, C[L]ose
@num_of_cols_in_key int,
@list_of_key_cols_tab_del nvarchar(255),
@list_of_cols_val_tab_del nvarchar(255)
AS
begin
-- Return values
declare @error int                       -- Result (0 for no error)
declare @error_message nvarchar (200)           -- Error string to be displayed
select @error = 0
select @error_message = N'Ok'
--    IF @OBJECT_TYPE = '59' AND (@TRANSACTION_TYPE = 'A' or @TRANSACTION_TYPE = 'U')
BEGIN
   IF EXISTS(
    SELECT T0.Price FROM IGN1 T0
    where IsNull(T0.Price, '0') = '0' and T0.DocEntry = @list_of_cols_val_tab_del)
   BEGIN
    SELECT @ERROR=1,@ERROR_MESSAGE='Please insert the price !'
END
end
-- Select the return values
select @error, @error_message
end

Hi Rathna,
Just put the SP like this, without the -- before the IF. A -- marks the line as a command therefore you need to uncomment and it will work.
IF @OBJECT_TYPE = '59' AND (@TRANSACTION_TYPE = 'A' or @TRANSACTION_TYPE = 'U')
BEGIN
   IF EXISTS(
    SELECT T0.Price FROM IGN1 T0
    where IsNull(T0.Price, '0') = '0' and T0.DocEntry = @list_of_cols_val_tab_del)
   BEGIN
    SELECT @ERROR=1,@ERROR_MESSAGE='Please insert the price !'
END
end
Hope it helps

An error occurred while adding the Cluster to the list

Hello,
I've installed the HFM 9.3.1 client on a Windows Server 2003 machine and now I'm attempting to configure it. I get all the way to the Server/Cluster Registration and when I try to add my one and only HFM application server to the list I'm present with this error.
"An error occurred while adding the Cluster to the list".
I don't see anything of use in the config tool log and as a result, I'm stuck. The odd thing is that not more than 10 minutes previously I added just finished installing the HFM client on another Windows Server 2003 machine and it installed / configured perfectly.
What am I missing?
Thanks!

You may have a DNS error of sorts. From a command line on the server which presents the error, ping the servername you are trying to reach. Do not use the cluster name, but instead use the server name or IP address. If you successfully reach it, use this in the registration utility. Once the server has been reached, it will return the cluster's name. If you cannot reach it using ping, focus on the underlying DNS problem.
--Chris

Error while adding music movie

I imported new music videos in iTunes. However, when I tried to add videos on my iPod, it says this was not copied to iPod because it cannot be played on this iPod. I have an new iPod Nano. and I converted videos to mov file. I dont know what else should I do. I usually get this error message; however, sometimes i did not get that...

Try here:
iTunes: Error 13019 during sync

Error occured while Adding a reference Web Service(BizTalkServer2009_Tutorial2)

Hi,
I was going through the Biztalk tutorials. While doing the second tutorial of web service I got stuck while adding reference to the Web Service.
Steps I did:
Add service reference(by right clicking my project) --> Advanced --> Add Web Reference --> URL : http://localhost/b2bsupplierprocesspo/process.asmx
But somehow this URL is not accesible over there. I got following error:
Please suggest/guide me on this.
Thanks, Girish R. Patil.

The error clearly states the reason for failure, being "CS0016: Could not write to output file ..... ..... - Access is denied."
The directory in question is the "C:\Windows\Microsoft.Ner\Framework\v2.0.50727\Temporary ASP.NET Files". So two things
Does the tutorial mention that the Web Service should be hosted under a .Net V2.0 Application Pool? If so then please give "Full Control" permissions to the above directory for the BizTalk Service Accounts (which also should be part of your "BizTalk Isolated
Host Users" Group.
If not then the service has to be hosted in a .Net v4.0 app pool. Change the Application Pool Settings through IIS Manager and give permissions to a similar folder (Temporary ASP.Net) but under the Framework\V4.0.... directory.
Regards.

Ipod Nano Error 13019 when syncing music

I started getting an error message 13019 mid-sync and now I can't sync any music to my nano, can anyone help?
I have reset my ipod, uninstalled and reinstalled itunes etc... I try and follow other posts about this error message but they apply to the ipod touch or iphone.
Help!!!

Went to: iTunes > Help > Run Diagnostics.
Ran "Device Connectivity" and "Device Sync" tests - all came back normal:
>>>
Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
HP-Pavilion GX613AA-ABA a6300f
iTunes 10.5.3.3
QuickTime 7.7.1
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 002CB1640CDDE2E8
Current user is not an administrator.
The current local date and time is 2012-01-28 11:05:32.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce 7100 / NVIDIA nForce 630i
**** External Plug-ins Information ****
No external plug-ins installed.
**** Device Connectivity Tests ****
iPodService 10.5.3.3 is currently running.
iTunesHelper 10.5.3.3 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Standard Enhanced PCI to USB Host Controller. Device is working properly.
Standard OpenHCD USB Host Controller. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
VIA OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Connected Device Information:
ChrisK iPod Touch 4Gen, iPod touch (4th generation) running firmware version 4.3.5
Serial Number: C3LG97EUDCP9
**** Device Sync Tests ****
Sync tests completed successfully. <<<<<
Just don't get this "Error 13019" code!

Seeking to fix this error: "Failed while adding virtual Ethernet switch connections."

I am getting the error below when trying ot make modifications to my Hyper-V.
I am trying to add a new Virtual Adaptor.
Hoping someone may have a suggestion on how to fix this.
Error:
New-VMSwitch : Failed while adding virtual Ethernet switch connections.
Failed to connect Ethernet switch port (switch name = 'XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX', port name =
'XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX', adapter GUID = '{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}'): The system cannot
find the file specified. (0x80070002).
The operation failed because the file was not found.
At line:1 char:1
+ New-VMSwitch -Name "LAN1" -NetAdapterName "Ethernet" -AllowManagementOS $True
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (Microsoft.HyperV.PowerShell.VMTask:VMTask) [New-VMSwitch], Virtualizati
onOperationFailedException
+ FullyQualifiedErrorId : ObjectNotFound,Microsoft.HyperV.PowerShell.Commands.NewVMSwitchCommand

Alex just a quick response to your advice re disabling AV, this did not work for me, after more searching the internet for a solution I found a post from 2013 where one poster offered the advice to go one step further, and it was to remove the AV package
completely, the package in question was KIS2013. I have KIS2015 and figured I would try it as I was getting a little frustrated with the constant failure to create a virtual switch.
Anyway, it worked for me, I removed KIS, rebooted, and the VS was created on the first attempt without any issue. So simply pausing/disabling the AV from within the AV program may not be enough, I suspect that some may work and others not, as in the case
of KIS. I wonder also if you disable the AV services at start-up if this would also work but I did not try it.
Anyway to other people experiencing this issue, I suggest disabling AV first as per Alex's advice, and if this does not work for you then suggest trying to remove the AV before doing anything more drastic like re-installation of OS as I have seen suggested
in more than one place.
Thanks
Mr Bee
--EDIT--
Just wanted to add, it is also worth 'excluding' any Hyper-V folders from the AV engine, I did not try this before removing KIS2015 so it may work without the need to remove your AV product, but on re-install I have now exluded the folders as suggest by
a few folks in various posts...

Error getting while adding BI patch (SQL error 1089 accessing)

Dear Experts ,
here i faced one problem while adding BI patch to newely installed system
the error is at phase import_proper below are shown error log
/usr/sap/trans/log/SAPI-704IFINBICONT.LBD
ERROR LOG
Start import R3TRFUGR/POSDW/CONVERSION_XML ...
1 entry for TADIR updated (R3TRFUGR/POSDW/CONVERSION_XML ).
2 entries from TFTIT deleted (pname /POSDW/SAPLCONVERSION_XML)
7 entries from FUPARAREF deleted (pname /POSDW/SAPLCONVERSION_XML)
2 entries from ENLFDIR deleted (pname /POSDW/SAPLCONVERSION_XML)
2 entries from TFDIR deleted (pname /POSDW/SAPLCONVERSION_XML)
dev trc ,00000 Fri Oct 1 10:28:27 2010 -649694573 88072.488603
dev trc ,00000 OCI-call failed with -1=OCI_ERROR 44 88072.488647
dev trc ,00000 SQL error 1089: 'ORA-01089: immediate shutdown in progress - no operations are permitted'
50 88072.488697
http://dbsloci. ,00000 *** ERROR => Error 1089 in stmt_fetch() from oci_execute_stmt(), orpc=0
59 88072.488756
http://dbsloci. ,00000 *** ERROR => ORA-1089 occurred when executing SQL stmt (parse error offset=0)
50 88072.488806
dev trc ,00000 sc_p=0x110f364a8,no=27,idc_p=0x110f4ece0,con=0,act=1,slen=68,smax=256,#vars=1,stmt=0x111799cc0,table=D010INC
57 88072.488863
dev trc ,00000 SELECT MASTER FROM D010INC WHERE INCLUDE = :A0 ORDER BY MASTER;
47 88072.488910
dev trc ,00000 sc_p=0x110f364a8,no=27,idc_p=0x110f4ece0,con=0,act=1,slen=68,smax=256,#vars=1,stmt=0x111799cc0,table=D010INC
113 88072.489023
dev trc ,00000 prep=0,lit=0,nsql=0,lobret=0,#exec=972,dbcnt=0,upsh_p=(nil),ocistmth_p=0x11179a658
50 88072.489073
dev trc ,00000 IN : cols=1,rmax=1,xcnt=0,rpc=0,rowi=0,rtot=0,upto=4294967295,rsize=80,vmax=32,bound=1,iobuf_p=0x111083a40,v
69 88072.489142
dev trc ,00000 lobs=0,lmax=0,lpcnt=0,larr=(nil),lcurr_p=(nil),rret=0
46 88072.489188
dev trc ,00000 OUT: cols=1,rmax=792,xcnt=792,rpc=0,rowi=0,rtot=0,upto=4294967295,rsize=80,vmax=32,bound=1,iobuf_p=0x111225e
54 88072.489242
dev trc ,00000 lobs=0,lmax=0,lpcnt=0,larr=(nil),lcurr_p=(nil),rret=0
46 88072.489288
dev trc ,00000 SELECT MASTER FROM D010INC WHERE INCLUDE = :A0 ORDER BY MASTER;
46 88072.489334
dbrepo ,06599 ***LOG BY4=>sql error 1089 performing FET on table D010INC dbrepo#4 @ 6599
72 88072.489406
dbrepo ,06599 ***LOG BY0=>ORA-01089: immediate shutdown in progress - no operations are permitted dbrepo#4 @ 6599
50 88072.489456
sap_dext called with msgnr 1:
db call info
function: db_report_interface
fcode: READ_MASTERS
tabname: SOURCE
len (char): 40
key: /POSDW/LCONVERSION_XML$01
retcode: 1
SQL error 1089 accessing : ORA-01089: immediate shutdown in progress - no ope
Main import
End date and time : 20101001102827
Ended with return code: ===> 12 <===
please clarefy me how can i solve this my issue
Regards

Dear Smathi,
Based on the error, Error 1089 in stmt_fetch, can you please check this error message with your database
administrator? Please have a look at note #551.
Regards,
Shimon Zafrir

Error -9672 While Adding Printer

I have connected an HP Deskjet Printer to my Airport Express. When I go into my Printer Utility to Add this printer, I am able to see it and select it. The location is correct and everything seems fine until I click on the Add button. This is when I get the following message:
An Error occurred while trying to add the selected printer.
Error -9672
I have tried everything and can't seem to get this to work. Any ideas anyone?

That is a common error, did you download & install the latest hp drivers, generally the ones that come on the CD are out of date!?
Might try these two after reinstalling the latest driver and repairing Permissions with a reboot afterwards...
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
Might try Printer Setup Repair 5.1...
http://www.fixamac.net/software/index.html
Kappy has further advice here...
http://discussions.apple.com/thread.jspa?messageID=8266833&#8266833

Error -9672 while adding networked printer

While trying to add a networked HP 3600n color laserjet to the printer list (via Bonjour) on a 10.5.6 G4 Macbook I always ended up with 'an error occurred while trying to add the selected printer' with a -9672 error code. After much deleting of printers, resetting the print system etc. I found that the problem was with the actual printer (another OS X machine turned up the same error). I did a cold reset on the 3600 (hold the tickmark button while the machine starts into its initialization phase after power on, then select COLD RESET from the menus) and re-entered its network settings and the problem on the OS X machines went away.
Posted here in case anyone else hits this. This same error message and error code appears in other circumstances and these are dealt with in other posts.

That is a common error, did you download & install the latest hp drivers, generally the ones that come on the CD are out of date!?
Might try these two after reinstalling the latest driver and repairing Permissions with a reboot afterwards...
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
Might try Printer Setup Repair 5.1...
http://www.fixamac.net/software/index.html
Kappy has further advice here...
http://discussions.apple.com/thread.jspa?messageID=8266833&#8266833

UNUSUAL iTunes 7 Error while Adding Music Folder

It's seems fairly simple, I am suprised thousands of others have not had this same problem. After I installed iTunes 7 I was adding a music folder (containing 4000+ songs) that is on an external HD...so,
1) iTunes notes that I have .wma files in the folder
2) I click either skip or convert, it doesn't matter
3) iTunes promptly has an error and closes.
However, if I use Windows search and exclusively find *.mp3 files, I can add thousands of them at a time without a problem. I would just let it be except I want my .wma's converted and there are multiple video files also in this folder that I don't want to have to find individually.
This error has occurred again and again regardless of restarting the program or the system.
Please Help!!!
HP Compaq tc4200 Tablet Windows XP

Hi
Due to some kind of copy protection in iTunes - I don't copy directly from this in iMovie
to my projects. (Most often the result of doing it in iMovie is a DVD without any sound)
I do
• In iTunes - collect needed audio into a new Playlist
• then burn this out as an Audio-CD .aiff (NOT .mp3)
• This CD I copy into a folder on my Mac (often containing other material that's connected to the project)
• And then I drag and drop these .aiff files into my movie project in iMovie.
This works Greatly and even more so when I do my DVD.
Yours Bengt W

Error generating while adding PO through DI

Hi All,
I got an error while creating Purchase Order through DI API by taking an Excisable Item and non-excisable Whs and non CENVAT TAX
The error is ' There are Excisable Item(s) with non-CENVAT tax code'
But if we are creating PO as same through UI API
it is successfully adding.
Then how can I add PO through DI API using this senerio.
Please reply anyone ASAP.
Anshu

Hi Anshu,
If you could add it through UI, try UI API instead of DI API.
Thanks,
Gordon

I keep getting an error message while downloading music i purchased, how do i solve this issue

Hi All, can you please help. I am struggling to dowload 3 songs from an album i just bought on iTunes. It keeps giving me an error message. What should i do?

You may be able to determine the reason for this error by examining your Mac's logs with Console. To do that find the Console app - it is in your Utilities folder and looks like this
You can find it by selecting Utilities from the Finder's Go menu.
Open Console.
If the log list column on the left is not already displayed, show the log list by selecting Show Log List from Console's View menu.
Locate system.log in the list and select it. Many date and time-stamped entries will appear, hundreds of them, and you must find the entries relevant to your Mac's problem. To do that choose Clear Display from Console's toolbar. Leave Console running while you choose Print from iPhoto again. Examine any new entries logged in Console. If there are any, copy and paste them in a reply.

Error 13019 while adding music

Similar Messages

Maybe you are looking for