Error 1316 and 1402 FAIL

Am posting this to help save others from the Adobe and Microsoft near-disaster I just went through this morning. Unfortunately, I do not have a solution to these two error messages and, like many of you, am wondering why after years of trouble-free Adobe Reader installations, the latest version of 9.3 simply will not install.
If you are going to experiment with some of the changes suggested elsewhere in this forum, take heed.  BEFORE you make any changes to your computer, make sure Windows System Restore is set up and working properly (you can search for "system restore" in "Help and Support" in Windows to find it).  System Restore basically saved my a** today.
The backstory is that I, like many others, cannot install Adobe Reader 9.3.  There are a number of suggested solutions on the Adobe Reader forum for error 1316.  They may get you further along in the Adobe Reader 9.3 installation process, but then you may hit "error 1402".
Here is what I did and here is what happened (running Windows Vista Ultimate 64bit on a PC with capacity and memory to spare):
1. Saved the Adobe Reader 9.3 installation file to my desktop so that I could run it locally.
2. Uninstalled the prior version of Adobe Reader using the Control Panel.
3. Rebooted.
4. Deactivated my antivirus software.
5. Closed all Windows apps.
6. Ran the Adobe Reader 9.3 installation setup and got Error 1316: "A network error occurred while attempting to read from the file ...AppData\Local\Adobe\Reader9.3\SetupFiles\AdbeRdr930_en_us.msi."
7. Based on advice found on this forum I used the Windows Installer Cleanup Utility - WARNING - DO NOT USE THIS WITH Office 2007 installed on your PC (http://support.microsoft.com/kb/290301). The advice on this forum didn't mention Microsoft's warning on this and I didn't know.  So even though I only checked the box for Adobe Reader, it totally messed up Office 2007.  When I tried to open Outlook 2007, it wanted to reinstall Office 2007, and then it said I didn't have correct permissions to do the reinstall (but I had administrative privileges enabled...wtf?)
8. Ironically, using the Windows Installer Cleanup Utility got me further along in the Adobe 9.3 installation process, but then I hit Error 1402: "Could not open key \Unknown\Components\C37BC61A283[continues for many more characters]. Verify that you have sufficient resources to access that key." Cannot get past this error.
9. Uninstalled the Windows Installer Cleanup Utility and rolled the OS back four days to a point where Outlook would launch without problems.
10. Reactivated the antivirus software.
This whole mess has wasted hours of time and I still can't install the newest version of Adobe 9.3.  There are lots of postings about these two error codes so it appears to be a common issue - does Adobe read these forums? Instead of asking their customers to fix the problem, how about they fix it? (Yes, Adobe Reader is free, but I purchased Photoshop Elements so would consider myself an Adobe customer).
Sorry for the rant.

I am so pleased to have found this posting. Have just spent 90 minutes trying to download 9.3.2 so my daughter can, supposedly, get full value from her school's Moodle site. Keep getting Error 1316 even after trying all the suggestions on the Adobe site, eg "save software first and then run". And in the middle of all this I got an autogenerated request to participate in an Adobe end user satisfaction survey! If someone out there has solved this without the need to upgrade to W7 please let us know. Meantime, I'm going to do some gardening.

Similar Messages

  • I am receiving error on ios 7 install,It says error occurred and update failed

    I am receiving error on ios 7 install,It says error occurred and update failed
    What should I do now ?
    Thanks

    It happened to me also but it is installed successfully in the second attempt with my iPhone5.

  • Error 1406 and 1402 When Installing iTunes

    Each time I attempt to download the new version of iTunes, it says I have an error 1406 or 1402. I have received instructions previously for this problem because this has happened before, but now they are failing to work. These are the directions I have:
    For install error code 1406 & 1402:
    Try the following:
    Start menu -> Run. Type in "regedit" (this takes you to the Registry Editor)
    Find the heading HKEYLOCALMACHINE. Click on it.
    Find the heading SOFTWARE inside it. Click on it.
    Find the heading Classes. Click
    Find the heading .cdda. Click
    Find the heading OpenWithList. Click
    Right-click on "OpenWithList" folder. Select Permissions. Select Add button. Select the Advanced button. Select "Find Now" button.
    The "Find Now" button should list all of the users, Select the "Everyone" user. Hit OK. This closes this dialog. Hit OK in the dialog box now on top. This closes this dialog.
    On the Permissions for OpenWithList box now on top, select "allow" checkbox in the "full control" row & hit OK.
    Do the exact same thing for the OpenWithProgids folder. Close regedit and try the install again.
    Are there any suggestions besides these directions that could possibly help me successfully download iTunes?

    Well after I do all the steps it tells me to do, I try installing again, and the exact errors come up.
    hi James!
    okay, we'd better check explicitly on your administrative rights in your user account. head into your user accounts control panel to see. let's also try the Installshield tips and pointers:
    http://consumer.installshield.com/faq.asp#ts
    keep us posted.
    love, b

  • How do I uninstall Elements 11?  I get Error 1316 and file it is looking for doesn't exist.

    Nothing happens when I click on the Organizer button on the bottom of the screen in a new installation except it says Loading the Elements Organizer Workspace and then the message goes away. So I was going to uninstall and reinstall and got the error 1316 message "Network error occurred while attempting to read from the file C:\windows\installer\adobe photoshop elements 11.msi.  This file does not exist.  I have no network.  Can' find an answer that deals specifically with version 11.  Tried the Microsoft Fixit and that aborted with code 80072F8F.  Any solutions?

    You can try running the CS Cleaner tool from CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.
    Were you previously trying to utilize the FixIt tool at http://support.microsoft.com/mats/program_install_and_uninstall/?

  • Error 1316 and Error 1603

    I have a Sony Viao with Windows XP. I am having serious issues with installing iTunes... I have tried installing the Quicktime by itself, turned off the sercuirty stuff and did the deleted the temp folder... I still get 2 error messages
    1) Error 1316 - A network error occured while attempting to read from the file C:/windows/installer/iTunes.msi
    then it says rolling back and when it's done rolling back it says
    2) Error 1603 - Fatal error during istallation consult windows installer help (msi.chm) or MSDN for more info.
    Please will someone help me. I am so flusterated as this was my birthday gift on the 13th
    Please feel free to email me @ [email protected] with any responses I am open to any help i can get.
    Thanks

    Happy birthday, you are going to have so much fun with your iPod once you get past this Windows installer nonsense!
    You said you cleaned your Temp directory, did you do the other steps in the Tips and Pointers section of this document?
    http://consumer.installshield.com/faq.asp#ts
    You are saving the iTunesSetup.exe to your hard drive, right?? and not trying to run the install over the internet?

  • I have an error 130:9 in Photoshop Elements associated with AMT Subsystem failure. I have tried Licencerecovery109. Did not work. I cannot uninstall Photoshop Elements. I get an error 1316 and the program is reinstalled. Please advise.

    I have screen dumps of the errors but cannot paste them

    Hi Hans
    Just to summarise:
    If I run Photoshop Elements I get a window headed "AMT Subsystem failure".  It states "This product has a problem which requires that you restart your computer before it can be launched. If you continue to see this message etc. contact Adobe Technical Support etc. Error 130:9. http etc".
    I have tried to run LicenceRecovery 109. This did not work. I have tried other suggestions on the internet. Nothing worked. This included resetting FLexnet.
    I then tried to uninstall and reinstall Photoshop Elements. There is no repair facility. The uninstall gets about 95% through and then stops and replaces all the files. I get a window headed "Adobe Photoshop Elements 8.0 Setup".  It states "Error 1316. A network error while trying to read from the file C:\windows\installer\adobe photoshop elements 8.0.msi."
    That is the details of the two screen dumps which I have.
    Please advise.
    Tom Lloyd

  • Errors -3 and 1402 and 1603

    well, let me say that this is my first posting and itunes drove me to do it!
    i've had itunes/windows for about four months and probably used/opened it about 10 times. then, last week, i opened it and was told that i needed to upgrade to the latest version of quicktime. but, as has been painfully and frequently recounted on this forum, quicktime goes through the motions of upgrading only to flash (me) errors -3, 1402, and 1603. let me say that
    i've read a number of the threads relative to these error messages and nothing i tried -- neither apple's nor bnoir's suggestions -- worked. i cleaned out temp files, uninstalled itunes and quicktime, downloaded the stand-alone quicktime version, disabled anti-virus and firewall programs, used windows installer, made registry changes, shut down all programs, and sent up the apple version of the bat signal.
    i was willing to just call my lost music (fortunately, only about 30 songs) a casualty of a code war but my xeric "earthdesk" wallpaper said it needed quicktime 6.something or above to function (Note: it was odd that even after i had deleted quicktime and itunes [using the uninstall feature], earthdesk still worked -- but then, after one more download and attempt at installing quicktime, earthdesk said it needed quicktime in order to work). since i had just purchasede earthdesk, i as motivated to get some version of quicktime back on my computer. so, i found a site where i could downoad my previous 6.something quicktime version. earthdesk works again, but i've not bothered to try itunes.
    my final point is this: it's hard to tell how many of the millions of itunes users are having difficulty upgrading quicktime. if this forum is at all representative, this seems to be a common/pervasive problem. software is inherently tempermental and maybe this is something that apple needs to look at. i'm not blaming apple b/c no product is perfect. all i'm saying is that maybe this is a big enough problem to merit apple's attention.

    http://docs.info.apple.com/article.html?artnum=93865
    This helped me out now it works great i should of looked more sorry for post.

  • Error 1406 and 1402

    I get these errors when I try to install I-tunes.
    Error 1406. Could not write value to key \software\classes.cdda.\openwithlist\itunes.exe verify that you have sufficient access to that key, or contact your support personnel.
    Error 1402. Could not open key: HKEYLOCALMACHINE\software\classes\.cdda.\openwit hprogids. verify that you have sufficient access to that key, or contact your support personell.
    Can anyone help? Because I don't know any other programs to get music on to my ipod

    Well after I do all the steps it tells me to do, I try installing again, and the exact errors come up.
    hi James!
    okay, we'd better check explicitly on your administrative rights in your user account. head into your user accounts control panel to see. let's also try the Installshield tips and pointers:
    http://consumer.installshield.com/faq.asp#ts
    keep us posted.
    love, b

  • Errors -1406 and 1402 and 1603

    Hi i keep getting these errors 1406, 1402, and 1603 when i try to install it here is a pic below.
    http://prime-evil.com/asp_upload/Untitled-3.jpg

    http://docs.info.apple.com/article.html?artnum=93865
    This helped me out now it works great i should of looked more sorry for post.

  • HT1923 I tried to install latest version of itunes on my PC and everthing went south. no matter how many times I reinstall it the new version or even an old version I get ERROR 7 (Windows error 126) and then fail to start because MSVCR80.dll is missing. H

    I tried to install latest version of itunes on my PC now the program doesn't start at all. I remove and reinstalled the program 5 times and I still get ERROR 7 (Windows 126) and failure to start because MSVCR80.dll is missing. Is there a simple fix?

    Click here and follow the instructions.
    (98915)

  • Error 1316 and 1603

    I have updated everything uninstall and install again and again, I have used the windows clean up thing and that did not work,anybody have anything else to try. I would just like to get my old version back so I can at least listen to my itunes.

    HI there.
    http://consumer.installshield.com/kb.asp?id=Q111019 Here is an article discussing 1603
    and 1316 is a microsoft article discussing office, but same things should apply
    http://support.microsoft.com/?kbid=263253

  • Why cant i send messages through imessage or FaceTime it always tells me that there was an error message and it failed

    so for a while my macbook air hasnt allowed me to facetime or send messages.. it tells me that the server encountered an error processing registration please try again later.. what could be wrong

    This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
    Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
    Step 1
    Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
    Step 2
    Sign out of iMessage on all your Apple devices. Log out and log back in. Try again to sign in.
    Step 3
    Restart your router and your broadband device, if they're separate. You may have to skip this step if you don't control those devices.
    Step 4
    From the menu bar, select
     ▹ About This Mac
    Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.
    Step 5
    Take the steps suggested in this support article. If you don't understand some of the steps or can't carry them out, ask for guidance.
    Step 6
    From the menu bar, select
     ▹ System Preferences ▹ Network
    If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If the box marked SOCKS Proxy is checked, uncheck it. You don’t need to change any other settings in the window. Click OK and then Apply. Test.
    The result may be that you can't connect to the Internet at all. Revert the change if that happens, or if iMessage still doesn't work. Remember that you must Apply any changes you make in the preference pane before they take effect.
    Step 7
    Select from the menu bar
     ▹ System Preferences… ▹ Flash Player ▹ Storage
    and click
    Block all sites from storing information on this computer
    Close the preference pane.
    Step 8
    Make sure you know the ID and password you use with iMessage. Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Use the search box in the toolbar of the Keychain Access window to find and delete all items with "iMessage" or "com.apple.idms" in the name. Log out and log back in.
    Step 9
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    If iMessage worked in the guest account, stop here and post your results.
    Step 10
    Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you start up, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. After testing, restart as usual (i.e., not in safe mode) and test again.
    If iMessage worked in safe mode, but still doesn't work when you restart in "normal" mode, stop here and post your results.
    Step 11
    Reset the NVRAM.
    Step 12
    Reinstall OS X.
    Step 13
    If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support.

  • Trying to uninstall Acrobat 10, I get an Error 1316. The specified account already exists

    I am a new Creative Cloud Subscriber.  I tried to install Acrobat XI Pro and received an error during the installation.  I contacted support, and they had me uninstall the partial installation of Acrobat XI, and then reboot the machine.
    After the reboot I attempted to install Acrobat 11 from a full version that I downloaded from the Adobe website, based on the information provided to me by support.
    That did not work and while the software was trying to uninstall Acrobat X I received an Error 1316, and it quit.
    Now when I try to remove Acrobat 10, I get the Error 1316 The specified account already exists.
    What do I need to do to uninstall Acrobat 10 and Install Acrobat 11.
    EJ

    You will need to repair AA X before you can uninstall it. AA XI typically breaks part of prior versions in that removal of AA XI, removes those parts of XI the overwrote parts of X and thus X is broken.

  • SQL Server 2008 R2 Management Studio (express) install fails (Management Tools Basic Failed) - Error 1316. The Specific account already exists.

    Hi,
    I try to install, the SQL Express 2008 R2 with Advanced 
    The installation has only one error  (Error 1316. The Specific account already exists.) and the Management Tools Basic setup is failed.
    Overall summary:
      Final result:                  SQL Server installation failed. To continue, investigate the 
    reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server 
    Setup.
      Exit code (Decimal):           -2068052700
      Exit facility code:            1212
      Exit error code:               1316
      Exit message:                  SQL Server installation failed. To continue, investigate the 
    reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server 
    Setup.
      Start time:                    2015-01-02 16:17:17
      End time:                      2015-01-02 16:24:01
      Requested action:              Install
      Log with failure:              C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap
    \Log\20150102_161500\SSCRuntime_Cpu32_1.log
      Exception help link:           http://go.microsoft.com/fwlink?
    LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.4000.0
    Machine Properties:
      Machine name:                  KHPNHSI_BNANG
      Machine processor count:       4
      OS version:                    Windows 7
      OS service pack:               Service Pack 1
      OS region:                     United States
      OS language:                   English (United States)
      OS architecture:               x64
      Process architecture:          64 Bit
      OS clustered:                  No
    Product features discovered:
      Product              Instance             Instance ID                    Feature             
                         Language             Edition              Version         Clustered 
    Package properties:
      Description:                   SQL Server Database Services 2008 R2
      ProductName:                   SQL Server 2008 R2
      Type:                          RTM
      Version:                       10
      Installation location:         g:\41bee43707e62fab54ec\x64\setup\
      Installation edition:          EXPRESS_ADVANCED
      Slipstream:                    True
      SP Level                       2
    User Input Settings:
      ACTION:                        Install
      ADDCURRENTUSERASSQLADMIN:      True
      AGTSVCACCOUNT:                 NT AUTHORITY\NETWORK SERVICE
      AGTSVCPASSWORD:                *****
      AGTSVCSTARTUPTYPE:             Disabled
      ASBACKUPDIR:                   Backup
      ASCOLLATION:                   Latin1_General_CI_AS
      ASCONFIGDIR:                   Config
      ASDATADIR:                     Data
      ASDOMAINGROUP:                 <empty>
      ASLOGDIR:                      Log
      ASPROVIDERMSOLAP:              1
      ASSVCACCOUNT:                  <empty>
      ASSVCPASSWORD:                 *****
      ASSVCSTARTUPTYPE:              Automatic
      ASSYSADMINACCOUNTS:            <empty>
      ASTEMPDIR:                     Temp
      BROWSERSVCSTARTUPTYPE:         Disabled
      CONFIGURATIONFILE:             
      CUSOURCE:                      
      ENABLERANU:                    True
      ENU:                           True
      ERRORREPORTING:                False
      FARMACCOUNT:                   <empty>
      FARMADMINPORT:                 0
      FARMPASSWORD:                  *****
      FEATURES:                      SQLENGINE,REPLICATION,SSMS,SNAC_SDK
      FILESTREAMLEVEL:               0
      FILESTREAMSHARENAME:           <empty>
      FTSVCACCOUNT:                  <empty>
      FTSVCPASSWORD:                 *****
      HELP:                          False
      INDICATEPROGRESS:              False
      INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server\
      INSTALLSHAREDWOWDIR:           C:\Program Files (x86)\Microsoft SQL Server\
      INSTALLSQLDATADIR:             <empty>
      INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
      INSTANCEID:                    SQLExpress
      INSTANCENAME:                  SQLEXPRESS
      ISSVCACCOUNT:                  NT AUTHORITY\NetworkService
      ISSVCPASSWORD:                 *****
      ISSVCSTARTUPTYPE:              Automatic
      NPENABLED:                     0
      PASSPHRASE:                    *****
      PCUSOURCE:                     g:\41bee43707e62fab54ec\PCUSOURCE
      PID:                           *****
      QUIET:                         False
      QUIETSIMPLE:                   False
      ROLE:                          AllFeatures_WithDefaults
      RSINSTALLMODE:                 FilesOnlyMode
      RSSVCACCOUNT:                  NT AUTHORITY\NETWORK SERVICE
      RSSVCPASSWORD:                 *****
      RSSVCSTARTUPTYPE:              Automatic
      SAPWD:                         *****
      SECURITYMODE:                  SQL
      SQLBACKUPDIR:                  <empty>
      SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
      SQLSVCACCOUNT:                 NT AUTHORITY\NETWORK SERVICE
      SQLSVCPASSWORD:                *****
      SQLSVCSTARTUPTYPE:             Automatic
      SQLSYSADMINACCOUNTS:           PSI\ssamnang
      SQLTEMPDBDIR:                  <empty>
      SQLTEMPDBLOGDIR:               <empty>
      SQLUSERDBDIR:                  <empty>
      SQLUSERDBLOGDIR:               <empty>
      SQMREPORTING:                  False
      TCPENABLED:                    0
      UIMODE:                        AutoAdvance
      X86:                           False
      Configuration file:            C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap
    \Log\20150102_161500\ConfigurationFile.ini
    Detailed results:
      Feature:                       Database Engine Services
      Status:                        Passed
      MSI status:                    Passed
      Configuration status:          Passed
      Feature:                       SQL Client Connectivity SDK
      Status:                        Passed
      MSI status:                    Passed
      Configuration status:          Passed
      Feature:                       SQL Server Replication
      Status:                        Passed
      MSI status:                    Passed
      Configuration status:          Passed
      Feature:                       Management Tools - Basic
      Status:                        Failed: see logs for details
      MSI status:                    Passed
      Configuration status:          Passed
    Rules with failures:
    Global rules:
    Scenario specific rules:
    Rules report file:               C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap
    \Log\20150102_161500\SystemConfigurationCheck_Report.htm
    Please help!
    Samnang.

    Hi SSamnang,
    According to your description, you come across the error that the specific account already exists. Please help to share the complete error log in C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150102_161500\SSCRuntime_Cpu32_1.log. You could
    use google drive to upload the error log following the steps in the article:
    https://support.google.com/drive/answer/2424368?hl=en
    From the exception help link, we notice that, the issue could be due to that an attempt fails to install SQL Server Native Client on a computer where SQL Server Native Client is already installed.
    I recommend you to check if there is already an existing SQL Server Native Client on your computer. If there is an existing one, you could uninstall it and install SQL Server again.
    In addition, there is a similar thread for reference:
    https://social.technet.microsoft.com/Forums/en-US/dc31bffd-c9e2-4630-b5d7-9252b03c24fe/sql-2008-r2-management-tools-install-fails-the-specified-account-already-exists?forum=sqltools.
    Regards,
    Michelle Li

  • Copy Failed "Error of Type -1402"

    I upgraded to Tiger a few months ago. I am trying to reinstall some old programs from the MAC OS X 10.3.3 installation CD. However, specifically the applications. However, when I try and do this I get the following message and my cd spits out.
    Copy Failed:
    An error of type -1402 occurred while copying.
    My guess is that I am trying to install applications from the 10.3.3 cd and should use the 10.3.4 cd? But, I need the older version applications. Is there any way to get these off my cd?
    Thanks.

    The error is:
    errFSBadForkName = -1402, /* Fork name parameter is bad */
    Use Pacifist to extract the installers. More than likely, Panther apps won't work with Tiger, but that's something for you to figure out.

Maybe you are looking for

  • My Mac mini's WiFi is slow

    Hi, my Mac mini's WiFi is slow: it's stuck when loading a page with Safari. Help please, I want to browse the Internet! The WiFi signal is best (4 bars): Here's a screenshot if you're interested:

  • Integration of  Web Dynpro to ITS

    Hi, I am working on ITS based application in SRM  . Is there any idea how can I make a call to Web Dynpro(ABAP)from ITS based Application ? Thanks & Regards, Sachin

  • Named dest values

    Hi                  We have a pdf document, with bookmarks action set to Named destinations.                  But in the actions tab it is not showing Named destination values                  and when we click Edit button, it is shows the Named Dest

  • Iphoto Thumbnails gone.

    In Iphoto I cannot see my thumbnails when I doubleclick pic. No matter what i do its only big pictures. I have doubleclick selected under preferences.

  • Photos not deleting in moments/collections!

    hello, i recently discovered some images that i deleted from stream and camera roll a while back still appear in moments/collections, the grey trash can in the top corner (ipad) is faint and not available to me? any advice please!!!?