Error 1322 installing labview 6.0.2 profession​al

Installing labview 6.0.2 Professional from your cd rom, after choosing the SCC option, appears on installer information menu, this message:
"error 1322 a portion of the folder path " exceed length allowed by the system".
What is happened ?
P.S. My operative system is Windows 95.

Hello,
This problem is probably resulting from a faulty install module with NI-VISA...you could verify this if you try the install without NI-VISA and it works properly. Anyway, to fix the problem, please follow these steps:
1. Run the "instmsi.exe" program from your LabVIEW CD.
2. Detach the file below to your hard drive.
3. Go to Start >> Run, and type the following:
msiexec /i "path to lv60.msi" TRANSFORMS="path to visafix.mst"
Where the paths within the quotes are the actual paths to the lv60.msi file (on your CD-ROM) and your visafix.mst file (which you detached somewhere on your hard drive). Once you've done this, the LabVIEW installation will start, and hopefully you will not encounter the error again.
If you do continue to have problems, howev
er, I recommend you install LabVIEW without NI-VISA, then go to our website and download and install NI-VISA separately.
Please let me know if you're continuing to have any problems. Thanks for your patience on this issue, and have a pleasant day.
Sincerely,
Darren Nattinger
Applications Engineer
National Instruments
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman
Attachments:
visafix.mst ‏4 KB

Similar Messages

  • Error while installing LabVIEW on Linux

    Getting Error while installing LabVIEW on Linux and unable to use VISA.
    Please check the installation Log i Have attached.
    nilesh
    Attachments:
    Installation Log LV2012 Linux.txt ‏25 KB

    I could not find a trail version for LINUX. 
    Its only available for Windows and mac.
    Will it possible for you to give just the C++ library and include files??

  • Run time error while installing Labview 8.6.1 in Vista x64

    hai friends,
               i got an error( Run time error) while installing Labview 8.6 software. this software has bought from NI. it shows the error path as setup.exe. this software i had tried to install in vista x64. but when i am installing the same software in windows xp, it is installing fine...so what was the problem for this error. how to solve it, please help me....

    Thank You Mr.Jason Daming,
    Same error what post Mr.muks referred in the last reply....
    When the installation begins an error occurs (after the acceptance of licence step in the installation procedure) with the title on the error window "Microsoft Visual C ++ Runtime Library " and displays the program set up path with these statements " This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
    while installing the same Labview in windows XP..... it is installing fine... but in vistax64 only i am facing this kind of problem...

  • SDK error while installing Labview 8.2 on Windows 7

    Hello all,
                      I have been trying to install LabVIEW 8.2 version software on Windows 7. I always see an SDK error - 12. I saw an helpful artcle in knowledge base but i am not clear why this is happening?
    Could somebody explain indetail whether LV8.2 is compatible with Windows 7?
    If it is not compatible then i would like install vista or XP on my new Laptop, to work in LV8.2.
    Regards
    Visu

    Hi Viswa,
    Im afraid LabVIEW 8.2 is not compatible with Windows 7. If you wanted to use LabVIEW Windows 7 you would need a later version of LV, such as LabVIEW 2009.
    If you need to use LabVIEW 8.2 then installing Vista or XP on your machine would mean you could.
    Kind Regards
    Michael
    NIUK Application Engineer

  • Error 1322 installing NI-IMAQ 2.5

    I have tried multiple times to install NI-IMAQ v2.5, but I have encountered the following error message: "Error 1322. A portion of the folder path " exceeds the length allowed by the system." This message occurs independently of the file directories I try to install to. It also seems that a version of Ni-IMAQ was installed on this computer a while ago, and was improperly uninstalled due to a message in the add/remove programs section of Control panel.
    Suggestions? I appreciate any response. Thanks for your help.
    Evan Weinberg
    Tufts University
    Fluid Turbulence Laboratory

    Hi Evan,
    I'm not sure exactly what's wrong here... but based on past experience, here's some things you may want to try.
    - Make sure you are in administrator mode, when doing this install.
    - If you are installing from a CD, sometimes I have seen this error when the CD is corrupt. You may want to download the driver from our website, and try to install it again. Or you can try to copy the contents of the CD to your hard disk and install it from the harddrive.
    Ken Sun
    Applications Engineering
    National Instruments

  • SDK Function Error While Installing LabVIEW Student 2010

    Hello everyone,
    I am trying to install LabVIEW Student Edition 2010 on Windows 7 64-bit. I get SDK function error. I searched the knowledgebase questions but it seems the problem is mostly for 2008 versions or older. If anyone knows the solution to this, it would be of great help. Thank you.
    Attachments:
    LabVIEW_Student2010_Error.jpg ‏41 KB

    Ok, then try to install the MS SDK for Win7 first
    http://www.microsoft.com/downloads/en/details.aspx?FamilyID=6B6C21D2-2006-4AFA-9702-529FA782D63B

  • Fatal Error when installing LabView 8.5

    I encounter a fatal error when I attempt to install LabView 8.5. The error that occurs has the following in its details:
    ".\UberInstaller.cpp(1871): IInstallerError 10014
    Fatal Error. A failure has occurred in NISystemInfo.
    CoLoadLibrary failed on C:\lv8.5\bin\NISysInf.dll"
    I am installing from a system that previously had LabView 8.2 installed, however everything was uninstalled before I began installing the new version.
    No hardware is connected in my computer.
    I copied the files from the DVD to my harddrive and am still failing to install it from there.
    The disc should be fine as my supervisor had used the same disc to install on his computer. ( our licence allows this )
    Any help would be appreciated.
    Attatched is a screenshot of the error.
    Attachments:
    error5.JPG ‏165 KB

    IInstallerError 10014 
    I searched for and found the same error in this forum that I am experiencing. I am trying to install the NI Switch Executive and the install fails every time. This is a fresh install and I am not running any antivirus s/w. It is a DVD copy of the Switch Executive s/w. Has there been any conclusive explanation as to what is happening with this? I have included a .jpg of the error. Thanks in advance for any help.
    Attachments:
    Error_Message.jpg ‏96 KB

  • Developer Error when Installing Labview 8.5

    Hi there,
    When I was installing Labview 8.5 directly from the CD, I had error message 1311. Following the recommendation posted on the discussion forum, I copied the CD to the C drive and installed Labview 8.5 successfully. However, when I tried to follow the same procedure when installing the device driver CDs,i.e. by first installing the CD to a folder in the C drive and installing it by launching setup.exe, I had the following error:
    "Developer error. The following errors were found in your ini file: 1 Specified file not found. [MSIEngine] WinNTPath = SupportFiles\WindowsInstaller-KB893803-v2-x86.exe       Correct the ini file and try again"
    When I checked the setup.ini file, under the [MSIEngine] entery, I found the following text:
    "[MsiEngine]
    WinNTPath=bin\WindowsInstaller-KB893803-v2-x86.exe
    RequiredVersion=3.0.0.0
    CommandLine=/passive /norestart"
    How can I correct the ini file? Should I change the WinNTPath to the one generated by the error message? Will this solve the problem? Your help would be very much appreciated.
    Regards.

    Hi Muks
    I have attached the niPie.exe from the Vision Development Module 8.5 installation CD. If you can still not install the software try downloading it from the link below. Let me know if this helps.
    Vision Development Module:
    http://joule.ni.com/nidu/cds/view/p/id/839/lang/en
    Thank You
    Eric Reid
    Applications Engineer
    Thank You
    Eric Reid
    National Instruments
    Motion R&D
    Attachments:
    niPie.zip ‏23 KB

  • Memory Error when installing labview 6.1

    I had labview 6.0, 6.1 and RT installed on my PC (windows 2000). I tried to install application builder but I got Error that I have no labview installed, so I tired to uninstall RT, but I was abe to. Then I found out that I can't install or uninstall any of the Labview versions. So I went and deleted the whole NI directory, all the keys related to NI in the registry file, and Labview.ini. Now I'm trying to install labview 6.1, but I'm getting memory error and setup terminates. What can I do!
    Attachments:
    LB_Setup_Error.gif ‏36 KB

    First, I recommend contacting NI support at ni.com/ask and starting an incident report.
    Second, I recommend either restoring your registry from backup, or wiping your system and starting over. I know it doesn't sound like fun, and it isn't, but it is probably the only way now you can guarantee a good clean registry. Alternatively, go through the registry again and make sure all National Instruments and LabVIEW entries are deleted.
    In the future, and I make this recommendation to everyone, you should, as a safe practice, make a backup of your registry before you install anything, and also periodically. Archive these and label them with the list of programs installed, or with any new programs that have been installed.
    The Windows registry is obsolete,
    and complete hopeless when it comes to a stable system. There is no automated backup of the registry to my knowledge. The registry is the biggest source of problems with Windows, followed of course by DLLs (everyone has their own version, and noone's is alike, much less works right.) The registry can be backed up by using "Export" from the regedit program. Backups can be restored with the "Import" function in regedit of course.
    Good luck.

  • Developer error when installing Labview 2010

    Dear Administrator,
    I uninstalled my old version of Labview 7.1 with Windows "Programs and Features", and try to install Labview 2010. However, error occurs. 
    It says:
    " Developer Error. The following errors were found in your ini file:
    1. Specified file not found: [Utilities] UpgradeManagerPostProcessro = bin\nipie.exe
    2. Specified file not found: [Utilities] NISysinfo = C:\Users\...\NI.LabVIEW.2010.v10.0\bin\NISysInf.dll
    Correct the ini file and try again."
    My system is WIN 7 English version.
    Help please.

    Hello,
    The first step I reccomend you try is to re-download the LabVIEW installer, and try to run it again.  Also, make sure you have Administrator access on your computer.
    You can download LabVIEW here.
    Regards,
    Matt M.
    Applications Engineer
    National Instruments

  • Please help solving error 1322 while installing Labview 6i

    Since I've upgraded my computer with Windows 2000 professional, and interupted once the install, I can't install Labview 6 anymore.
    I get error 1322 from the installer, even when i install plain Labview files (no ivi, nidaq etc.)
    Darren's solutions doesn't work
    Please help

    Ronald,
    First of all let's make sure that we have a clean computer, that is I suppose you don't have more NI software on it so you may want to check that in your hard drive you don't have any National Instruments folder under the Program Files directory. And best of all you may want to check your Windows Registry, NOTE: This is very delicate so you must be careful. Go to Start >> Run.. type: "regedit" and enter, first of all make a backup copy of this file... then browse through: HKEY_LOCAL_MACHINE >> SOFTWARE >> National Instruments.... you should not have this folder if you haven't install LabVIEW... so you may delete it... "ONLY THIS FOLDER (National Instruments)"..., once you finish close the registry.... and reboot the computer... once back re-check all what
    we have done here.... and if everything is ok then let's proceed again to install LabVIEW... if you get the same error please try to install LabVIEW (plain files again, not any driver) in another machine to know if the CD is damaged or not... this type of installation problem Ronald can also be better troubleshoot by phone, the information to contact us is at... www.ni.com/ask , and if there is a need to call us then tell the person in the line about this procedures that you have already tried.
    Good luck!...
    Nestor Sanchez
    Applications Engineer
    National Instruments
    Nestor
    National Instruments

  • Labview 8.6 Microsoft Visual C++ Runtime error while installing

    I am installing Labview 8.6 on my laptop which is having Windows Vista Home premium edition.
     When the installation begins an error occurs (after the acceptance of licence step in the installation procedure) with the title on the error window "Microsoft Visual C ++ Runtime Library " and displays the program set up path with these statements " This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
    I am unable to install it on my laptop. Can anybody please help me.
    Thank you

    hi
    broadly the error could be because of two reasons:
    1. Runtime Engine exe file is corrupt in the CD you are using to install LabVIEW.
    Solution: Download LabVIEW Runtime Engine 8.6 from http://joule.ni.com/nidu/cds/view/p/id/1101/lang/en
    2. There's some problem with the windows installation in your PC.
    Solution: you know reinstall windows
    But before trying to reinstall, make sure you installed the msi.dll using "Regsvr32 (system folder path)\msi.dll" . I'm sure you did.
    thanx
    Ravi

  • When Trying to Install Labview 8.6.1 on Windows 7 Get Error Code -12

    When Trying to Install Labview Deveopment Suite 8.6.1 on Windows 7 Get " *** Error: Windows SDK Function Returned an Error (Error Code -12)"
    I assume a compatability issue will Labview installer and Windows 7.  Is there a work arround?

    I figured as much, but maybe if enough peole are interested NI will be pushed to a solution.
    It's not that the programm won't run, it's that the installer fails before it even gets installed.
    I am using Windows 7 RC Build 7100.  It installs and runs just fine in Virtual XP Mode on Virtual PC for windows 7 (http://www.microsoft.com/windows/virtual-pc/download.aspx) which I find works better than compatability mode.
    Thanks for your help.

  • Error 1935 when installing LabVIEW on Windows 7

    Hello, everyone.
    I'm new to Windows 7 and I need to install LabVIEW 8.5.1 and 2010.
    The problem is that the installation process (for both versions) gives me a lot of errors related to Microsoft Visual C (code 1935), like the popups attached.
    What could be happening?
    Kind regards,
    Daniel R.
    Attachments:
    Clipboard01.png ‏11 KB
    Clipboard04.png ‏11 KB
    Clipboard03.png ‏9 KB

    Hi Daniel,
    LabVIEW 8.5.1 is not supported on windows 7. To LabVIEW 2010 you have turn off, during installation, firewall, antivirus and spyware blockers.
    http://digital.ni.com/public.nsf/allkb/98DFF2B564902B9886256FB1004E448F?OpenDocument
    Regards,
    Abel
    NI Brazil
    Abel Souza
    Engenheiro de Aplicações
    National Instruments Brasil

  • "fatal execution engine" error when launching labview--I just installed it?

    I just installed Labview (I still have the CD in my computer) but when I double click the icon to start the program it starts the splash screen, but then issues an "internal execution engine fatal error." The only option to enter is into the JIT debugger. I have XP/SP2 and I have uninstalled my C/C++ compiler and my Ada Compiler, but I am still receiving the error. I have uninstalled Labview twice and reinstalled it, but still the same. The disk that I am installing is labeled 7.1, so I went to the website and downloaded 7.1.1 and installed it but still the same error. I tried to install Labview barebones (without drivers, CVI, etc...) but this didn't fix my problem either. I am out of ideas.
    Ronnie_b

    Hey Ronnie,
    I know Marni personally, and I'm sure she's done her homework on this one. Unfortunately with this being an issue specific to your PC, it does sound like it might be one of those issues that is unidentifiable and seemingly "incurable" without reformatting. However, I'll double check with Marni tomorrow to make sure we've exhausted all possibilities before having you reformat.
    I'll get back with you via this post.
    Take care,
    Travis H.
    National Instruments
    Travis H.
    LabVIEW R&D
    National Instruments

Maybe you are looking for

  • Cannot send mail to a group if hiding addresses

    I can't send mail to a group unless I show all member addresses. If I uncheck this preference I recieve the following error dialogue: This message could not be delivered and will remain in your Outbox until it can be delivered. Sending the message co

  • Epson 2200 and 2400 and Mountain Lion.

    Today I will buy an iMac with Mountain Lion.  Will I still be able to use my Epson 2400 scanner and 2200 printer?

  • OOTB create user is not working for AD

    Hi, While creating the user am getting the following error. [6/1/11 0:33:28:153 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,153,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRunTimeVariableMappings - Data: adv name - Value: PasswordNeverE

  • Preview in OS X Leopard not working?

    I can no longer view new uploaded photos in Preview OR in a folder with Leopard. I can however view the ones there BEFORE Leopard. Same camera, same everyting. Any ideas? Thanks.

  • Raise event from within process chain

    Is there some way to easily raise an event from within a process chain?  The only way I know to do this is to run an ABAP program that raises the event.