Error 1322 uninstalling NiDaq 6.8

I am trying to install LabVIEW 7 Express on a PC that already has versions 5.1.1 & 6i installed. The installation program for 7 Express fails and instructs me to remove NiDaq version 6.8 before trying to install 7 Express again. The problem is that when I try to uninstall NiDaq 6.8 I get the following error: "Error 1322. A portion of the folder path " exceeds the length allowed by the system." Now I can't install 7 Express and I can't uninstall 6.8. How do I proceed from here?

I am having a similar problem.
1) I am trying to install device drivers on a computer with LV 8.2 AND LV 6. I had the same problem as gdhanson and others,
     and receive the message that I should uninstall NIDAQ 6.8, and when I tried to do that, received the
     message "Error 1322. A portion of the folder path etc etc"
2) I followed the threads on previous such discussions, and tried the remedy proposed by Darren Nattinger,
     NI Applications Engineer, on a posting dated 7/11/2001. He suggested modifying a batch file killlv.bat to point
     to the executable file mszap.exe, run the batch file, and it would delete all necessary files.
     I did this, and now LV 6 has been uninstalled. It no longer shows up under the programs when I run
    Add/Delete files.
3) However, the original problem is still there. When I tried install the device drivers, it STILL says
     NIDAQ 6.8 is present and must be removed. Under Add/Remove programs, however,
     there is no LV6 and nothing that lists NIDAQ 6.8 as a component.
4) Are there any other suggestions?
5) I think it is unnecessary to call this problem "rare." It clearly will happen to the valued customers
     who are trying to upgrade from LV 6. It is unfortunate that such a longstanding problem has not
     been addressed.

Similar Messages

Error 1322 installing NI-IMAQ 2.5

I have tried multiple times to install NI-IMAQ v2.5, but I have encountered the following error message: "Error 1322. A portion of the folder path " exceeds the length allowed by the system." This message occurs independently of the file directories I try to install to. It also seems that a version of Ni-IMAQ was installed on this computer a while ago, and was improperly uninstalled due to a message in the add/remove programs section of Control panel.
Suggestions? I appreciate any response. Thanks for your help.
Evan Weinberg
Tufts University
Fluid Turbulence Laboratory

Hi Evan,
I'm not sure exactly what's wrong here... but based on past experience, here's some things you may want to try.
- Make sure you are in administrator mode, when doing this install.
- If you are installing from a CD, sometimes I have seen this error when the CD is corrupt. You may want to download the driver from our website, and try to install it again. Or you can try to copy the contents of the CD to your hard disk and install it from the harddrive.
Ken Sun
Applications Engineering
National Instruments

Please help solving error 1322 while installing Labview 6i

Since I've upgraded my computer with Windows 2000 professional, and interupted once the install, I can't install Labview 6 anymore.
I get error 1322 from the installer, even when i install plain Labview files (no ivi, nidaq etc.)
Darren's solutions doesn't work
Please help

Ronald,
First of all let's make sure that we have a clean computer, that is I suppose you don't have more NI software on it so you may want to check that in your hard drive you don't have any National Instruments folder under the Program Files directory. And best of all you may want to check your Windows Registry, NOTE: This is very delicate so you must be careful. Go to Start >> Run.. type: "regedit" and enter, first of all make a backup copy of this file... then browse through: HKEY_LOCAL_MACHINE >> SOFTWARE >> National Instruments.... you should not have this folder if you haven't install LabVIEW... so you may delete it... "ONLY THIS FOLDER (National Instruments)"..., once you finish close the registry.... and reboot the computer... once back re-check all what
we have done here.... and if everything is ok then let's proceed again to install LabVIEW... if you get the same error please try to install LabVIEW (plain files again, not any driver) in another machine to know if the CD is damaged or not... this type of installation problem Ronald can also be better troubleshoot by phone, the information to contact us is at... www.ni.com/ask , and if there is a need to call us then tell the person in the line about this procedures that you have already tried.
Good luck!...
Nestor Sanchez
Applications Engineer
National Instruments
Nestor
National Instruments

Configuration error - please uninstall and reinstall the product

Configuration error - please uninstall and reinstall the product - Installieren lässt sich Indesign jedoch nicht
Da frage ich mich, was zu tun ist
thank you

Hi tututinu
Please refer the below KB Doc : http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html
Or check the below forum post : http://forums.adobe.com/message/3008803

ERROR in uninstall of odac 11.2.0.2.1 xcopy 64bit on win7 64bit

Today I try to load oracle.dataaccess.dll in C:\Windows\Microsoft.NET\assembly\GAC_64\Oracle.DataAccess\v4.0_4.112.2.0__89b483f429c47342, but not success. Then I try to uninstall ODP.net4, after uninstallation, I found the error in uninstall.log. I uninstall 4.112.2.0, but it loaded 4.112.3.0. What's wrong?
Uninstalling Oracle Data Provider for .NET 4
Unconfiguring Oracle Data Provider for .NET 4
INFO: oracle.dataaccess.resources, version=4.112.2.0,processorarchitecture=amd64 is un-registered successfully from GAC.
ERROR: Encountered a problem while unregistering ODP counters
mscorlib:Could not load file or assembly 'Oracle.DataAccess, Version=4.112.3.0, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
INFO: policy.4.112.oracle.dataaccess, version=4.112.2.0,processorarchitecture=amd64 is un-registered successfully from GAC.
INFO: oracle.dataaccess, version=4.112.2.0,processorarchitecture=amd64 is un-registered successfully from GAC.
Oracle Data Provider for .NET 4 unconfigured
Oracle Data Provider for .NET 4 uninstalled
*******************************************

Are you able, from that same dos prompt, to open D:Windows\Microsoft.NET\Framework64\v2.0.50727\CONFIG\machine.config with notepad (ie, just type notepad machine.config ) , make a change, and save it? I ran into this once before, and in that case the customer was also unable to edit the file via Notepad. I never did find out the root cause in that case, as the assumption was that it was a non-Oracle issue at that point and once the issue seen with Notepad was resolved the ODAC bat file install would also work, and I never heard back after that.
Greg
Edited by: gdarling on Mar 19, 2012 11:05 AM
Also, when you say UAC set to allow everything, I assume you mean you disabled UAC. Did you reboot after disabling it?

Error while uninstalling SAP NW PI 6.0 on SUN SOLARIS DB2

Hi,
SAP NW PI 7.0, SUNSOLARIS, DB2. , Dual stack - SID: BWD
Error while uninstalling the PI 6.0 next to the input screen "Database connect User as Java" .
Please find the below error details and help.
ERROR      2011-02-11 11:19:54.973 [iaxxinscbk.cpp:260]
MDB-01999 DB6_DB_Instance unexpected Returncode 1 in execution of /db2/db2bwd/d
ERROR      2011-02-11 11:19:54.981
           CJSlibModule::writeError_impl()
MUT-03025 Caught ESAPinstException in Modulecall: DB6_DB_Instance unexpected Re
ERROR      2011-02-11 11:19:55.114 [sixxcstepexecute.cpp:951]
FCO-00011 The step StartDatabaseManager with step key |NW_Uninstall|ind|ind|indB6_Uninstall|ind|ind|ind|ind|6|0|StartDatabaseManager was executed with status Enstance unexpected Returncode 1 in execution of /db2/db2bwd/db2_software/instanc
Note: Both ABAP & JAVA stack was working and we are uninstalling to install fresh PI 7.1 higher version.
Thanks.
chidam

Hi,
Uninstallation completed successfully and problem solved.
SOLUTION:
saposcol -k
cleanipc
Uninstallation continued with old option and completed.
Thanks
Chidam.

Error 1322 installing labview 6.0.2 professional

Installing labview 6.0.2 Professional from your cd rom, after choosing the SCC option, appears on installer information menu, this message:
"error 1322 a portion of the folder path " exceed length allowed by the system".
What is happened ?
P.S. My operative system is Windows 95.

Hello,
This problem is probably resulting from a faulty install module with NI-VISA...you could verify this if you try the install without NI-VISA and it works properly. Anyway, to fix the problem, please follow these steps:
1. Run the "instmsi.exe" program from your LabVIEW CD.
2. Detach the file below to your hard drive.
3. Go to Start >> Run, and type the following:
msiexec /i "path to lv60.msi" TRANSFORMS="path to visafix.mst"
Where the paths within the quotes are the actual paths to the lv60.msi file (on your CD-ROM) and your visafix.mst file (which you detached somewhere on your hard drive). Once you've done this, the LabVIEW installation will start, and hopefully you will not encounter the error again.
If you do continue to have problems, howev
er, I recommend you install LabVIEW without NI-VISA, then go to our website and download and install NI-VISA separately.
Please let me know if you're continuing to have any problems. Thanks for your patience on this issue, and have a pleasant day.
Sincerely,
Darren Nattinger
Applications Engineer
National Instruments
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman
Attachments:
visafix.mst ‏4 KB

Error When Uninstalling HP LJ 1020n Software on Windows 7 (x64)

When attempting to uninstall the HP LJ 1020n software downloaded from the HP product page for this device (HP LaserJet Hostbased Plug and Play Basic Driver) for Windows 7 (x64) I receive the following error while uninstalling:
"Setup Encountered an abnormal program execution. Setup will shutdown."
Any thoughts and/or comments would be greatly appreciated.

Same problem HP1022n laserjet on Win7 64bit. uninstall generates "Setup Encountered an abnormal program execution. Setup will Shutdown."
The problem that I am trying to fix is that this PC - HP Touchsmart TX2 can no longer print to the 1022n. Other PCs on the network are able to print without difficulty.
I'm trying to get this user to be able to print, and HP says "uninstall / re-install" - and I can't.
Any help or suggestions out there?
Gary

I recieved error 1328, uninstalled Acrobat, need to download new Acrobat, have CS6 installed, where is the download?

I received error 1328, uninstalled Acrobat, need to download new Acrobat, have CS6 installed, where is the download?
I do not want a trial version, Windows 7 op system.

Hi Mark ,
What flavor of CS6 you want to download ?
Please refer to the following link to select the desired flavor and you can license it by typing in your serial number.
https://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
Regards
Sukrit Dhingra

"Configuration error" I uninstall and reinstall Muse, but it not works.

Hello, I have problem with Muse. I installed last update and after install I can't open Muse. I have "Configuration error" I uninstall and reinstall Muse, but it not works. Thanks

Hi,
What is the complete error message? Are you using Windows or Mac? Did you try to disable anti virus while installing Adobe Muse?
Please provide some details, so we can get more idea about the problem

Error while uninstalling AddOn

Hi all,
The scenario is this:
1. Create and AddOn and AddOn Installed using B1DE's B1 AddOn Installer Setup .NET template.
2. Register the AddOn in B1
3. Restart B1 to install AddOn
4. Modify the AddOn and create a new installer (creating new project, modifying the Product Key and using the same Upgrade Key);
5. Uninstall previous version
6. Register new version
7. Restart B1 to install newer version
8. In client machines open B1 to uninstall older version and install the newer.
On step 8, in some machines, I get this error while uninstalling the previous version. I apologize for the error being in Portuguese. I'll try to reproduce the error in a machine running English OS.
The question. Does any body come across this error before? How can I avoid it?
Thanks in advanced,
Regards,
Vítor Vieira

A máquina onde ocorreu este problema era antiga e entretanto foi substituida e este erro deixou de acontecer.
O sistema operativo dessa máquina era o Windows XP e este erro ocorreu com a versão 2007 do SAP B1.
Pela imagem que enviou, penso que a situação é semelhante.
Nas máquinas mais recentes e com Windows Vista este problema ainda não ocorreu, que eu tenha conhecimento.
Cumprimentos e bom fim de semana,
Ana Silva
The machine where this problem occurred was old and was replaced and the error stopped happening.
The operating system of this machine was Windows XP and this error occurred with the 2007 version of SAP B1.
For the picture you sent, I think the situation is similar.
In more recent machines with Windows Vista this problem has not occurred yet.
Regards and have a nice weekend,
Ana Silva

Error after uninstalling the SAP Integration Kit XI 3.0 on Unix

Hi all,
I have uninstalled the SAP Integration Kit XI 3.0 on a single solaris server installation. Uninstall was done exactly as instructed in the manual and everything looked ok.
Now when I try to go to the login page of CMC or InfoView I get an error:
type Status report
message /PartnerPlatformService/service/app/logon.do
description The requested resource (/PartnerPlatformService/service/app/logon.do) is not available.
Is the login page trying to look for the SAP authentication page that was removed ?
Is there some configuration still remaining somewhere that needs to be removed so I get the old login page back ?
Thanks for ideas, Timo

Thanks for pointing to the right direction. I changed the tomcat webapps web.xml file parameter and it was enought to start working again.
   <context-param>
        <param-name>config.logon.service.context</param-name>
        <param-value>/PlatformServices</param-value>
    </context-param>

File not found error on Uninstall

Hi,
Got a problem with the deinstallation of Labviewer. I deployed Labviewer with all moduls using the setup.exe's and specfiles.
Installation worked fine and the software runs well.
But when I try to uninstall running "uninst.exe /log C:\temp\uninst.log /qb /x all"
It immediatly starts with an error stating "File not found RegDeleteKey" (see Attachment).
Judging by ProcMon and ProcessExplorer the Exception i caused from the nirg.exe.
If I click ok, the deinstallation goes on and finishes. Anyone an Idea on this topic?
Greetings, Alex
Attachments:
NI-Error.JPG ‏32 KB

Yes that is excactly the problem.
The System is Windows 7 64Bit (Enterprise) and I used Labviewer 12. We installed all Modules from the 4 DVDs provided , as this was requested by the department which will use the software.
The error itself seems to be connected to the NIRG module. If I leave NIRG out from the installation, the deinstallation of all other modules works without an error.
Best Regards,
Alexander Jarke

0x87D01280 "Virtual application is currently in use" error when uninstall App-V Office 2013 in Software Center

Getting the above error message when attempting to uninstall Office 2013 App-V version (downloaded using ODT) in Software Center. There are no office 2013 or App-V processes showing as running in Task Manager. Nothing in event viewer to show what is running
either. Any idea on what could be running and holding the uninstall from completing?

Hello,
These issues are caused if the virtual package is used during the attempt to uninstall.
SFTMIME is a legacy command-line interface for App-V 4.6, not supported for usage with App-V 5 (which is the only version that supports Office 2013).
App-V 5.0 SP2 has introduced the ability to divert required actions to next logoff / reboot depending on publishing, if the package is in use.
See these articles;
http://www.applepie.se/app-v-5-0-sp2-and-pending-removal-update
http://blogs.technet.com/b/virtualvibes/archive/2013/12/03/pending-tasks-in-app-v-5-0-sp2.aspx
Nicke Källén | The Knack| Twitter:
@Znackattack

Creative cloud desktop won't load the "apps" section/shows download error/ have uninstalled & reinstalled/ also completed yosemite os install successfully to see if it was a compatability issue/but still shows download error on apps/ this only occurred af

I have a macbook pro 2010 & extra storage and drive space
I don't know what the link is between the new creative cloud update in january and the loss of my apps & downloading error after that update, to the desktop window?
Before that I hadn't had any trouble with the apps window..all the other parts are syncing and seem fine?
I uninstalled & reinstalled the creative cloud desktop
I installed the yosemite os x to see if the new interface was an issue...all was fine with the yosemite install
I have checked for the answer in the troubleshooting guide
nothing seems to apply at this point...
didn't know if anyone else was having the same difficulty?
Thanks

is this the 'unknown' download error or some other error? attaching a screenshot of the error if it's in english would be helpful.

Error 1322 uninstalling NiDaq 6.8

Similar Messages

Maybe you are looking for