Error 1326 while installing labview 6 on windows 2000

I am trying to install LabVIEW 6 on a windows 2000 system. I get an error 1326.Error getting file security
C:\WINNT\system 32\comctl32.ocx GetLasterror:5

I think this is a MS error code. Have you made sure that you have administrator privileges?
Jeremy

Similar Messages

Please help solving error 1322 while installing Labview 6i

Since I've upgraded my computer with Windows 2000 professional, and interupted once the install, I can't install Labview 6 anymore.
I get error 1322 from the installer, even when i install plain Labview files (no ivi, nidaq etc.)
Darren's solutions doesn't work
Please help

Ronald,
First of all let's make sure that we have a clean computer, that is I suppose you don't have more NI software on it so you may want to check that in your hard drive you don't have any National Instruments folder under the Program Files directory. And best of all you may want to check your Windows Registry, NOTE: This is very delicate so you must be careful. Go to Start >> Run.. type: "regedit" and enter, first of all make a backup copy of this file... then browse through: HKEY_LOCAL_MACHINE >> SOFTWARE >> National Instruments.... you should not have this folder if you haven't install LabVIEW... so you may delete it... "ONLY THIS FOLDER (National Instruments)"..., once you finish close the registry.... and reboot the computer... once back re-check all what
we have done here.... and if everything is ok then let's proceed again to install LabVIEW... if you get the same error please try to install LabVIEW (plain files again, not any driver) in another machine to know if the CD is damaged or not... this type of installation problem Ronald can also be better troubleshoot by phone, the information to contact us is at... www.ni.com/ask , and if there is a need to call us then tell the person in the line about this procedures that you have already tried.
Good luck!...
Nestor Sanchez
Applications Engineer
National Instruments
Nestor
National Instruments

Error message while installing QT for Windows 7.1.3

While installing Quicktime I get the message:
Error reading from file: C:\Program Files\Quicktime\QTSystem\QTJava.zip. Verify the file exists and that you can access it.
Abort Retry Ignore
I checked the directory and the file is there. Clicking Retry does not seem to help. If I Ignore the installation proceeds but the player doesn't work properly. I have to Abort installation for now.

let's try getting a QuickTime 7.1.3 installer log to the Apple Engineers for a look.
first, doublecheck that all itunes and quicktime has been removed from the PC as per:
Removing iTunes and QuickTime for Windows
now download and save a copy of the standalone QT 7.1.3 installer to your hard drive:
Quicktime 7.1.3 Installers … get the one that doesn’t mention iTunes
1. Open a command prompt window. (Start menu -> Run. Type in "cmd". Hit return.)
2. Drag and drop QuickTimeInstaller.exe onto the window so that the full pathname of the file is at the command line prompt.
3. Type in a space, then the following line:
/l*v C:\log.txt
4. Hit return.
5. The installer will create a log file:
C:\log.txt
Find that file and send it as an attachment to this email address.
in the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of QuickTime you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing
(probably best to explicitly mention that you're attaching a QT log, too. most of the logs Roy gets through that channel are iTunes logs.)

Error 1935 when installing LabVIEW on Windows 7

Hello, everyone.
I'm new to Windows 7 and I need to install LabVIEW 8.5.1 and 2010.
The problem is that the installation process (for both versions) gives me a lot of errors related to Microsoft Visual C (code 1935), like the popups attached.
What could be happening?
Kind regards,
Daniel R.
Attachments:
Clipboard01.png ‏11 KB
Clipboard04.png ‏11 KB
Clipboard03.png ‏9 KB

Hi Daniel,
LabVIEW 8.5.1 is not supported on windows 7. To LabVIEW 2010 you have turn off, during installation, firewall, antivirus and spyware blockers.
http://digital.ni.com/public.nsf/allkb/98DFF2B564902B9886256FB1004E448F?OpenDocument
Regards,
Abel
NI Brazil
Abel Souza
Engenheiro de Aplicações
National Instruments Brasil

Invalid Drive Error 1326 When Installing iTunes for Windows

I used to have an external usb 2.0 portable drive. It since has been uninstalled and trashed. When I tried to log into iTunes it said that some of the files are missing and to uninstall. I uninstalled from Control Panel - itunes, quicktime, ipod- then deleted the files that the support site said to. When I tried to re-install, i get the error that Drive G is invalid- error 1326. Any ideas????
By the way- I couldn't find the files in C:- Windows- System 32 to delete- they weren't there-
Thanks!

Now I get the error the folder path "My Pictures" contains an invalid character.
okay, we've had some success with similar messages citing the "My Pictures" path applying the following MS document:
You may receive one of three error messages when you try to install Streets and Trips or MapPoint

Error 1326 while installing Reader 9

I have tried numerous times to install Acrobat Reader 9 on Windows Vista Home Premium. Every time, it fails. Version 8 is installed now. When automatic updates try to upgrade version 8, that also fails.
Here is the error message I receive during installation, with about 3 seconds remaining in the installation process:
Error 1326. Error getting file security: C:\Users\my name\appdata\local\adobe\acrobat\8.0\
GetLastError: 5
What do I need to do to get beyond this barrier?

I am equally frustrated with Reader 9 as it seems to constantly clash with Vista and will not run on my computer. I used the Windows Install Cleanup as suggested by another user, as I couldn't uninstall my partially corrupt, non working Reader 9 programme. After a couple of attempts I was able to uninstall correctly. I then re-booted and downloaded Reader 8.1 and it is finally working. Thank you to others for their information.
I guess the problems stem from Vista as there seem to be so many programme corruptions going on with this. We didn't want to buy Vista but seemed to have no option as they are sold as standard. Automatic programme updates cause most of the problems, so disable them if you can.
Since we got our new computer we have had to re-load our printer drivers and software so many times, as Vista keeps corrupting everything - arrrgh!

Error while installing j2sdk-1_4_2_05-windows-i586-p.exe on windows 2000

Hi folks,
I am getting the following error while installing j2sdk-1_4_2_05-windows-i586-p.exe on windows 2000 machine:
Error 1327. Invalid Drive: H:/.
I have downloaded the exe and kept in C drive. Just clicked that exe to install. I haven't set any info. like drive settings. Why I am getting "Invalide Drive" Error?
Please help me.
Thanks in advance.
Pavan

if my above link doesn't satisfy you, try this one : http://support.installshield.com/kb/view.asp?articleid=q107033

Error while installing LabVIEW on Linux

Getting Error while installing LabVIEW on Linux and unable to use VISA.
Please check the installation Log i Have attached.
nilesh
Attachments:
Installation Log LV2012 Linux.txt ‏25 KB

I could not find a trail version for LINUX.
Its only available for Windows and mac.
Will it possible for you to give just the C++ library and include files??

Error while installing j2sdk-1_4_2_05-windows-i586-p.exe

Hi folks,
I am getting the following error while installing j2sdk-1_4_2_05-windows-i586-p.exe on windows 2000 machine:
Error 1327. Invalid Drive: H:/.
Please help me.
Thanks in advance.
Pavan

Hi Pavan,
Is the drive not writable?
If you still need help with this, you might get more response by posting on the Java Forum http://forum.java.sun.com/forum.jspa?forumID=31.

Run time error while installing Labview 8.6.1 in Vista x64

hai friends,
i got an error( Run time error) while installing Labview 8.6 software. this software has bought from NI. it shows the error path as setup.exe. this software i had tried to install in vista x64. but when i am installing the same software in windows xp, it is installing fine...so what was the problem for this error. how to solve it, please help me....

Thank You Mr.Jason Daming,
Same error what post Mr.muks referred in the last reply....
When the installation begins an error occurs (after the acceptance of licence step in the installation procedure) with the title on the error window "Microsoft Visual C ++ Runtime Library " and displays the program set up path with these statements " This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
while installing the same Labview in windows XP..... it is installing fine... but in vistax64 only i am facing this kind of problem...

There is an error occured while installing cs6 trial on windows 8

There is an error occured while installing cs6 trial on windows 8

Please check the install logs
http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html

I am running Windows 7 and trying to update to iTunes version 10.5 (from version 10.3.1.55) and I keep getting the following error message, 'Error occurred while installing the updates. If the problem persists, choose Tools Download Only and try instal

I am running Windows 7 home edition and trying to update to iTunes version 10.5 (from version 10.3.1.55) and I keep getting the following error message, ‘Error occurred while installing the updates. If the problem persists, choose Tools > Download Only and try installing manually’ which I do only to have the same error message pop up.

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

Trying to update iTunes and I get the error - "errors occured while installing the updates. If the problem persists, choose Tools Download only and try installing manually". Currently on version 10.5.3.3 trying to update to 11.0.2 on a Windows 7 64-bit

Trying to update iTunes and I get the error - "errors occured while installing the updates. If the problem persists, choose Tools > Download only and try installing manually". Currently on version 10.5.3.3 trying to update to 11.0.2 on a Windows 7 64-bit.

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

Getting error while installing update for Windows 10

Hi,
I am getting below error message while installing window 10 preview using window update option. Please help me how to address this issue to install window 10 preview
OS : Windows 7 Enterprise SP1 64 bit
Upgrade to Windows Technical Preview for Enterprise
Installation date: ‎10/‎3/‎2014 10:50 PM
Installation status: Failed
Error details: Code 80004005
Update type: Recommended
Install a preview of the next version of Windows.
More information:
http://go.microsoft.com/fwlink/?LinkID=507415
Help and Support:
http://go.microsoft.com/fwlink/?LinkId=507417
Regards
Selva

Hi Selva,
Can you download the ISO file from this site?
Download Windows Technical Preview
http://technet.microsoft.com/en-us/windows/dn783436
If so, please download the installer and make a DVD or bootable USB, then try to perform the installation from there.
Check following things first:
1.Disconnect any devices connected to the PC.
2.Disable/uninstall all anti-virus software (be sure to enable/reinstall later)
3.Install all important updates from Windows Update before updating.
If you still fail to install Windows, you will find $Windows.~BT under C drive (the system drive), please make sure to show up the Hidden file.
Then, locate to the $Windows.~BT folder and find \Sources\Panther\setuperr.log and setupact.log, please upload them to a file sharing service like Onedrive or "Rapidshare" and put a link to them in your reply.
Kate Li
TechNet Community Support

While installing itunes with windows 7, i get error -the feature you are trying to us is on a network resource that is unavailable-

While installing itunes with windows 7, i get error -the feature you are trying to us is on a network resource that is unavailable-

That doesnt work for me. I removed itunes through the windows cleaner method as shown in other posts and re-installed itunes. Now im getting this error
iTunes was not installed correctly. Please reinstall iTunes
Error 7 (Windows error 126)
Also my Microsoft office has stopped working after i deleted Itunes which is really strange.
Can somebody provide me a solution please....

Error 1326 while installing labview 6 on windows 2000

Similar Messages

Maybe you are looking for